134,829 used machines on RESALE, but how to find them? Machine Search
x-travel: 2000 mm y-travel: 1500 mm z-axis: 3000 mm W-axis (spindle longitudinal): mm spindle diameter: 100 mm table surface area: 1.400 x 1.300 mm table load: t spindle turning speed range: U/min power capacity - milling spindle: kW tool taper: MK | dimensions: 6,4 x 3,2 x 3,4 m weight of the machine ca.: 11,0 t used table borer. - some tool holders - turntable with motor - coolant system - facing plate Ø 660 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1200 mm, 800 mm, 1 t
16mm Hole Welding Table Basic 750 - 1200 x 800mm, 1m High Sigmund Table Top 4-161025.P.T2 - 147kg Original price net 1.278€ The undermount cabinet also cost about 700€ With aluminium base cabinet approx. 100kg load capacity approx. 1000kg. 6x Fixings high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 11.5 – 13 mm - Bore Ø 16 mm - Holes surface 50x50 mm grid - Corners, edges and holes rounded - Height of sidewall 50 mm - Bore spacing sidewall 50 mm - Construction reinforced by ribs - Grid lines enable precise setups
x-travel: 1000 mm y-travel: 900 mm z-axis: 800 mm W-axis (spindle longitudinal): 500 mm spindle diameter: 90 mm table surface area: 1.000 x 1.000 mm table load: 2,5 t spindle turning speed range: 8- 1600 U/min power capacity - milling spindle: 11 kW tool taper: SK 40 | control: Heidenhain TNC 407 dimensions: 4,5 x 3,25 x 3,0 m weight of the machine ca.: 8 t used table borer. retrofitted to CNC Heidenhain TNC 407 - some tool holders - turntable with motor - coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with Siemens SINUMERIK ONE Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minNC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationTool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)Tool magazine 60 pocketsTool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loadingChip removal package with cabin roofSwarf removal package chip conveyor Coolant - air-blast changeover Swarf con ...
surface area: 420 800 mm no. of flutes: 9 groove width: 12 / Abstand 45 mm weight of the machine ca.: 110 kg dimensions of the machine ca.: 10,50,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: ? mm table width: ? mm table height: ? mm total power requirement: 1,2 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 3,51,61,5 m Set of welding stations (6 pieces) + suction unit Shipping - Dimensions: 6 welding tables 3 Euro pallets Extraction unit approx. 1.6 x 0.8 x 1.5 m on Euro pallet Total weight estimated approx. 750 kg. 6 welding stations / tables + suction unit Drive: 1.2 Extraction with 1.78 m³ / s The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 400 mm table load: 0,2 t table height: hor. 200 / vert. Sph. 310 mm total power requirement: 0 kW weight of the machine ca.: 0,155 t dimensions of the machine ca.: 0,60,530,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0,6 t : -- mm : -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N S ...
High-speed rotary tablet press for the pharmaceutical industry. With integrated safety systems. CHARACTERISTICS - Exchangeable turrets - Included turrets: EU-B; EU-D - Only 900 working hours - Number of stations: 45 PRODUCTION - Single layer tablet output: 158,000 - 282,000 tablets/hour - Tablet diameter: 14 mm - Tablet thickness: 8.5 mm - Pressure: 10,000 kg - Main pressure: 10,000 kg DIMENSIONS - Footprint: 1,659 x 1,285 mm - Height: 2,044 (without hopper)/2,199 (with hopper) mm - Weight: 4,000 kg (approx)
table length: 2000 mm table width: 1000 mm stroke height: 400 - 1010 mm weight max. in kg: 300 kg weight of the machine ca.: 220 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 140 mm x-travel: 2000 mm y-travel: 2000 mm z-axis: 1500 mm spindle stroke - max.: 800 mm spindle taper ISO: 50 table surface area: 1800 x 1500 mm table load: 15000 kg turning speed range: 2,3 - 810 U/min total power requirement: ca. 30 kW weight of the machine ca.: 31000 kg dimensions of the machine ca.: 7300 x 5600 x 4000 mm Equipment: - Faceplate with NC facing slide and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 350 mm weight of the machine ca.: 50 KG tool adaptor: MK5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: Expert Eda450 Size of table plate: 450 mm weight of the machine ca.: 380 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Heidenhain 355 tool adaptor: SK50 weight of the machine ca.: 8 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 630 mm table width: 630 mm table load: . t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-travel: 1250 mm w-axis: 800 mm b-axis: 360 ° spindle turning speed range: 1000 U/min transmission ratio: 4 Control: Heidenhain type: 355 table surface area: 1800x2200 mm Table load: 12000 kg spindle taper ISO: 50 width of T-slots: 22 mm T-slot - distance: 160 mm Feed: 1-6000 mm/min total power requirement: 80 KVA weight of the machine ca.: 36 t dimensions of the machine ca.: 7,7x7,2x4,9 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can fi ...
spindle diameter: 90 mm x-travel: 2000 mm y-travel: 1250 mm z-travel: 1250 mm spindle turning speed range: 8-1600 U/min spindle stroke: 720 mm Feed: 1-2500 mm/U weight of the machine ca.: 9,1 t 31881-07/9 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mm x-travel: 6000 mm y-travel: 1750 mm z-travel: 600 mm w-axis: 800 mm spindle taper: SK 50 control: Siemens 8M type: 8M mm table surface area: 1500x1300 mm Table load: . kg turning speeds: . U/min spindle motor: . kW feed: . m/min chip conveyor: coolant: x-travel: mm total power requirement: . kW weight of the machine ca.: 75 t dimensions of the machine ca.: . m Tool magazine: 60 tools The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours ar ...
spindle diameter: 100 mm x-travel: 1500 mm y-travel: 1250 mm z-travel: 1800 mm turning speeds: 7,1-1120 U/min table surface area: 1200x1200 mm w-axis: 800 mm Radial face slide: 600 mm radial face slide travel: 200 mm Tailstock: mm angular milling head: digital readout: Heidenhain total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forwar ...
spindle diameter: 130 mm x-travel: 2750 mm y-travel: 2500 mm z-travel: 1050 mm w-axis: 1000 mm Radial face slide diameter: 800 mm radial face slide travel: 240 mm table surface area: 1800x2000 mm turning speeds: 4,8-900 U/min workpiece weight: 8000 kg faceplate speeds from - to: 4,5-180 U/min Feed: 5-2000 mm/min threading: total power requirement: 40 kW weight of the machine ca.: 37 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. ...
spindle diameter: 160 mm x-travel: 4000 mm y-travel: 2200 mm z-travel: 1500 mm : 270 mm spindle turning speed range: 20-2000 U/min Control: Heidenhain type: TNC530i table surface area: 3000x1600 mm table load: 40 t spindle taper ISO: 50 spindle motor: 50 kW T-slot - width: 28 mm number of T-slots: 9 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on ...
spindle diameter: 125 mm x-travel: 2200 mm y-travel: 1700 mm z-travel: 1400 mm spindle travel: 900 mm spindle taper ISO: 50 turning speeds: 6-1000 U/min table surface area: 1120x1800 mm total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-axis: 1250 mm W-axis (spindle longitudinal): 800 mm : ISO 50 P.D.B : 1800x2500 mm : 12 t : 3000 Hertz : 400 total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m ATC 40 positions Safety guarding Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was ...
spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-travel: 1250 mm w-axis: 800 mm b-axis: 360 ° spindle turning speed range: 12,5-900 U/min Control: Heidenhain type: 155 table surface area: 1800x1600 mm Table load: 12000 kg spindle taper ISO: 50 width of T-slots: 22 mm T-slot - distance: 160 mm Feed: 1-6000 mm/min table rotating: 360 ° angular milling head: total power requirement: 80 KVA weight of the machine ca.: 36 t dimensions of the machine ca.: 7,7x7,2x4,9 m Refurbished 2005 Head extension Tool kit can be purchased optionally The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are ...
table length: 3000 mm table width: 1500 mm table load: 20 t bed width: 1000 mm guideway width: 150 mm T-slot - width: 28 mm x-travel: 3000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Suitable as a drilling machine or additional axis The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS ...
table length: 2500 mm table width: 1500 mm table load: 15 t bed width: 1230 mm guideway width: 125 mm x-travel: 3500 mm bed length: 7300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Suitable as a drilling machine or additional axle 2 units available The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was create ...
used
table length: . mm table width: . mm table load: . t T-slots: 15 T-slot - distance: 95 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 100-1000 bar liter capacity: 10 l motor speeds:: 975 total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 100 mm x-travel: 1500 mm y-travel: 1250 mm z-travel: 1800 mm turning speeds: 7,1-1120 U/min table surface area: 1200x1200 mm w-axis: 800 mm Radial face slide: 600 mm radial face slide travel: 200 mm Tailstock: mm angular milling head: digital readout: Heidenhain total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forwar ...
spindle diameter: 125 mm x-travel: 2000 mm y-travel: 1100 mm z-travel: SK 50 mm spindle taper: Philips 2500 digital readout: Pfillips turning speeds: 925 U/min spindle stroke: 800 mm Table: 1000x1400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created wit ...
WM1 300 CNC incl. Renishaw TP 200 Year of construction 2020 Clamping tool from DK Fixiersysteme 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Incident light illumination by diode ring light, 4 sectors and 1 ring individually switchable Precision measuring table in X and Y Diode lasers as positioning aids Joystick and trackball for axis movement with fast/slow switching Camera-based measurement data acquisition Precise edge detection in transmitted and incident light with the help of intelligent image processing algorithms Small and handy – big in performance Fast handling with maximum measurement precision Special features incl. Touch Probe System Renishaw TP 200 LED surface lighting, switchable Diode lasers as positioning aids With a measuring range of 300 mm × 200 mm × 200 mm, it scores particularly well for stamped, ...
General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min, - USB-interface, Ethernet-interface; Control: CELOS X with Siemens 840D SL Operate Working areaSwing diameter over guide ways700 mmTurning diameter700 mmDistance between spindles3360 mmClamping chuck diameter max.630 mmBar diameter max.125 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-20000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1700 NmMain drive 1Drive power (100% DC)40 kWSpeed range- 2 ...
sliding table length: 3000 mm; cutting width at the fence: 1000 mm; cutting width at the cross cut: 3200 mm; cutting depth: scoring unit: ja; height adjustment sawblade: manuell / Kurbel; tilting adjustment sawblade: manuell / Kurbel; adjustment fence: manuell; readout sawblade tilting: Digital; read out sawblade height: -; read out fence: Scala; read out crosscut: Scala; sawbladediameter: 450 mm; number of speeds: 4000 U/min; motor power: 4 kW; motor brake: ja - automatisch; suction connection: 80 mm und 120 mm; machine length: 3000 mm; machine width: 2100 mm; weight: ca. 1100 kg;
sliding table length: 3200 mm; cutting width at the fence: 1350 mm; cutting width at the cross cut: 3200 mm; cutting depth: 125 mm; scoring unit: ja; sawblade diameter: electric; tilting adjustment sawblade: electric; adjustment fence: manuell; readout sawblade tilting: Scala; read out sawblade height: -; read out fence: Scala; read out crosscut stop: Scala; sawblade diameter: 400mm; number of speeds: 3000 / 4000 / 5000 U/min; motor power: 7 kW; motor brake: yes, automatic; suction connection: 80mm und 120mm; machine length: 3400mm; machine width: 2000mm; weight: 900kg;
sliding carriage length: 3200 mm; cutting width with rip fence: 1200 mm; cutting width at the cross cut: 3450 mm; Schnittiefe: scoring unit: yes; height adjustment: manual / crank; tilt adjustment: manual / crank; rip fence adjustment: manual; display saw blade tilt: digital; display saw blade height: -; display rip fence: scala; display at the cross cut: Scala; saw blade diameter: speeds: 3200 / 4200 / 5000 U/min; motor power: 5 kW; motor brake: yes - automatically; suction connection: 80 mm and120 mm; machine length: 3350mm; machine width: 1800 mm; weight:
sliding table length: 3300 mm; cutting width at the fence: 1000 mm; cutting width at the cross cut: 2800 mm; cutting depth: 170 mm; scoring unit: nein; height adjustment sawblade: hydraulisch; tilting adjustment sawblade: hydraulisch; adjustment fence: manuell; read out sawblade tilting: Scala; read out cutting height: Scala; read out fence: Scala; read out crosscut: Scala; sawbladediameter: 500 mm; sawblade speeds: 2800 / 4000 / 5500; motorpower: 5,5kW; suction connection: 80 und 120mm; machine lenght: 4000 mm; machine width: 2200 mm; weight: ca. 1300kg;
Table diameter: approx. 800 mm Table dimensions of the clamping angle: 400 x 300 mm with three grooves Auction-ID: A7-49089-146
Dimensions per table shelf: 1200 x 800 mm height-adjustable incl. electrical connections Auction-ID: A7-49089-558
The turntable is used for loading or unloading products, containers, and bottles. It is freestanding and has its own drive system. The rotational speed can be controlled continuously with a frequency converter. Product-contacting parts are made of stainless steel. Turntable diameter: 800mm. It is freestanding and height-adjustable on dome-shaped feet. It also has a side attachment for sliding containers from a pallet onto the turntable, and side guides for sliding containers onto a conveyor belt. The power connection is about 0.35 kW 400V. YouTube Video: youtu.be/VLwFuRR2NG0
Multi-person workstation, see photos for more details.
DELTA LC 500 - Rotary Table Grinding Machine -CE marking -Year of construction 2011 -Magnetic Plate - Rotary Table 500mm -Max. grinding diameter 500mm -Distance column -Grinding spindle axle 315mm -Grinding height max. magnetic clamping plate - Grinding wheel 215mm -Speed grinding spindle 2840 rpm -Fine adjustment over micron 0.01mm -Rough adjustment (height adjustment) motorized via keyboard -Spindle motor 3 KW -Dimensions of the cup wheel 200x80x78mm -Machine enclosure -Coolant device -Documentation Dimensions: LxWxH 1.3x0.8x1.8 meters / Weight 800Kg
DELTA LC 400 / Rotary Table - Surface Grinding Machine -Magnetic clamping plate (turntable) 400mm -Max. grinding diameter 400mm -Grinding height (distance table - grinding wheel) approx. 220mm -Grinding wheel dimension / standard / 200x80x78mm -Speed / grinding spindle 2840 rpm -Fine adjustment 0.01mm -Distance / column - Grinding wheel axle 315mm -Spindle motor / 3KW -Side grinding wheel puller -Machine enclosure -Coolant device Dimensions : LxWxH 1.2x0.8x1.8 meters / Weight 700Kg
Technical Data:, • Working width: min. 20 mmmax. 250 mm, • Winding diameter: max. 510 mm, • Core sizes: min. 1”max. 3” (up to 6” with adapter), • Air supply: 6 bar, • Web tension: 1–21 N, Equipment:, • Base frame with two servo motors, • 2 pneumatic winding shafts, • Web tension system via dancer roller, • Splice and defective label detection, • Splicing table, • Measuring roller, • Counter, • Operation via HMI touch screen with digital handwheel, Features:, • Bi-directional winding, • Inside & outside winding, • Winding tension control: diameter-dependent or independent, • Fully reproducible winding results, • Integrated job memory (recipe management), • Counters for labels, linear meters, and diameter, Performance Model Gepard 500, Speed: 500 m/min (depending on material and winding diameter), Web width: 250 mm, Idler rollers: approx. 80 mm ...
Güntner Table Cooler GFH 090.2A/2×2 L(S)-F6/4P Air cooler from 2012, four fans. Was cooling of a 916 KW Jenbacher JMS 412 CHP plant. 1 available 10 bar / -1 bar, 100°C / -50 °C, 159 l. Manufacturer: Güntner Model: GFH 090.2A/2×2 L(S)-F6/4P Type: Table Cooler Serial number: 100/1112041.0001 Max/Min Pressure [bar]: 10 / -1 Max/Min Temperature [°C]: 100 / -50 Volume [l]: 159 Fans 4 x VT01183 Year of Make: 2012 Weight unit [kg]: 1,600 Dimensions LxWxH [m]: 4.50 x 3.25 x 1.50
Technical details Type: Fabric spreading and cutting table system Configuration: Dismantled modular system Construction: - Laminated worktable panels - Steel/aluminium perimeter frames - Integrated measuring scales and rulers - Support rails and guide profiles - Fabric roll shafts and spindle assemblies - Roller transport components - Pneumatic hoses and fittings Components included: - Multiple table sections - Heavy-duty steel rollers - Fabric-feed shafts - Reel holders with flange discs - Guide rails - Pneumatic accessories Application: - Fabric spreading operations - Textile cutting preparation - Marker-making tables - CAD cutting support systems - Garment manufacturing - Textile production facilities Estimated dimensions when assembled: - Length: Approx. 6000 mm - Width: Approx. 2200 mm - Height: Approx. 900 mm Estimated weight: Approx. 450 kg Condition ...
table diameter: 500 mm table load: ? t table height: hor. 235 / Sph. vert. mm groove width: 18 mm total power requirement: - kW weight of the machine ca.: 0,270 t dimensions of the machine ca.: 800640235 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
surface area: 440 x 1000 mm no. of flutes: 5 groove width: 16 mm total power requirement: - kW weight of the machine ca.: 210 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 100 mm x-travel: 1250 mm y-travel: 1120 mm z-axis: 1250 mm table-size: 1250 x 1250 mm taper: ISO 50 PDB total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
150 € 
