127,712 used machines on RESALE, but how to find them? Machine Search
Rotary tablet press for tableting single-layer tablets. Easy punch tool change, quick to clean, low noise operation. Including dust collector, tablet deduster and vacuum feeder. - Specifications: press tool: D | number of punch stations: 15 | max. speed of the machine in neutral: 77 cycles/minute (corresponds to approx. 69,000 tablets/hour) | max. tablet diameter: 25 mm | max. filling depth: 20 mm | max. precompression force: 12 kN | max. main compression force: 100 kN | product contact parts are made of stainless steel SUS 316L, chassis is made of stainless steel 304 | power consumption: 5.5 kW | machine dimensions: 660?690?1620 mm | weight: 675kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short d ...
table length: 400 mm table width: 400 mm table load: 600 / 1000 kg Control: total power requirement: kW weight of the machine ca.: 120 kg dimensions of the machine ca.: m Used rotary table in very good condition, little used (less than 100 hours) Has been used with a Bosch CNC control. Table diameter 400 mm Bosch AC-Motor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Automatic collection system for cans, glasses, bottles. Collection of single containers on rotating table so that jams can be avoided. - Specifications: up to 80 containers/min | diameter of table: 1.200mm | 380V, 0.18kW | machine weight: 50kg | dimensions: L1300xW1200xH1000mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Key data: 250 mm
Kitagawa TT 250 HMM03 NC Rotary Tables Table diameter 250 mm Spindle bore Ø 70 mm Weight 260 kg If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Jörgensen tablet press type 075HK3, built in 1961, with accessories, poor condition
used
Paper vibrator with spreading rollers Baumann BSB 3/L, year of construction 1988, serial number 210277, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Bobr Sbjh H Ivij Nwkedc You are welcome to visit the machine in our house by prior appointment.
Used semi-automatic tablet/capsule counter, produkcji firmy Kwang Dah z Tajwanu, model KDC-101. New: 2012 Capsules or tablets are counted in the machine by a sensor measuring the filling of the bottles. The sensor ensures accurate counting and dosing of tablets, lozenges, pills or transparent capsules. The machine is equipped with a compensator and a sensor that provides automatic adjustment according to the collected powder in the sensor window. Power supply: AC 110V/230V, 50Hz, single-phase, 5A Machine weight: 70kg Machine dimensions: 88 x 76 x 70 cm（length x width x height）
Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T
Manufacturer: Lisec Technical Specifications ( Model: ATH -60/30 D) - Year of Manufacture: 1995 - Operating Voltage: 380 V, 3-phase, 50 Hz - Power Consumption: 5.9 kW - Machine Weight: 6,000 kg - Compressed Air Pressure: 6 bar - Maximum Load Capacity: 500 kg Machine Length: 6,600 mm Total Installation Length: - With 4 glass racks: 25,500 mm - With 3 glass racks: 19,300 mm - With 2 glass racks: 13,100 mm - With 1 glass rack: 6,900 mm Depth: 3,200 mm Height: 3,600 mm Load Capacity: 600 kg Transport Speed: 40 m/min Glass Size (Max): 3,250 × 6,000 mm Glass Size (Min): 1,600 × 2,800 mm Glass Thickness: 3–12 mm Electrical Connection: 220/380 V, 50 Hz Installed Power: 6 kW Compressed Air Connection: NW 9, 6 bar Technical Specifications ( Model: ESL-60/30RS) - Year of Manufacture: 1998 - Operating Voltage: 400 V, 3-phase, PE, 50 Hz - Power Connection: 13.5 kW - Machine Weigh ...
number: 70 Positionen weight: 90 kg condition: neu : 28 mm WMT Set 7: 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item ...
Stock number: DT077, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tablet deduster, Dimensions: L 400 x W 350 x 300 mm., Manufacturer: King, Model/type: BR 6
Stock number: DT072, Tablet compressing machine,, Fette model Perfecta 1000., Circular with 22 stations,, Ø 19 mm tooling., Max 72.600 tablets/hour., Including control cabinet,, including Ø 11 mm. set of formats.
Stock number: D1214, Circular table, King,, with laminate table top., Ø 1000 mm., Dimensions: Ø 1000 mm.
Stock number: F423, Tablet counter,, King type TB 2 painted model., Max tablet size: Ø 11,5 mm,, 220 V., Table model.
Stock number: F728, Tablet counter,, King type TB2 painted model., Max tablet size: Ø 11,5 mm., 220 V.
Stock number: D698, Separating table, stainless steel,, standing on 4 legs., Roller conveyor in the bottom., L 990 x W 570 mm., Material: Stainless steel AISI 304, Size: L 990 x W 570 mm.
Stock number: D857, Table, aluminium,, with legs., L 2500 x W 1260 x H 1000 mm., Material: Aluminium, Size: L 2500 x W 1260 x H 1000 mm.
Stock number: D2030, Table, stainless steel,, standing on legs., L 1100 x W 760 x H 820 mm., Material: Stainless steel AISI 304, Size: L 1100 x W 760 x H 820 mm.
Stock number: D649, Table, stainless steel,, with legs., L 1560 x W 700 x H 900 mm., Material: Stainless steel AISI 304, Size: L 1560 x W 700 x H 900 mm.
Stock number: D1171, Table, stainless steel,, standing on legs with wheels., Tabletop and legs can be separated,, L 1400 x W 900 x H 810 mm., Material: Stainless steel AISI 304, Size: L 1400 x W 900 x H 810 mm.
Stock number: D2015, Table, stainless steel,, standing on legs., Raise/lower function,, L 1790 x W 700 x H 880 mm., Material: Stainless steel AISI 304, Size: L 1790 x W 700 x H 880 mm.
Stock number: D2009, Tabletop with sink, stainless steel,, sink 500 x 400 x H 180 mm., Table top L 2800 x W 650 mm., Material: Stainless steel AISI 304, Size: Table top L 2800 x W 650 mm.
Stock number: D2029, Table, stainless steel,, standing on leg frame., L 2200 x W 1000 x H 800 mm., Material: Stainless steel AISI 304, Size: L 2200 x W 1000 x H 800 mm.
Stock number: D1168, Table, stainless steel,, standing on legs with wheels., 1 shelf., L 700 x W 300 x H 600 mm., Material: Stainless steel AISI 304, Size: L 700 x W 300 x H 600 mm.
Stock number: D1095, Table, stainless steel,, standing on legs., Fiberboard on top,, 1 shelf., L 1000 x W 760 x H 1170 mm., Material: Stainless steel AISI 304, Size: L 1000 x W 760 x H 1170 mm.
Stock number: D1110, Table, stainless steel,, electric raise/lower function., Wall mounted., Leg frame with shelf L 4000 mm., Table top L 2075 x W 700 mm., Material: Stainless steel AISI 304, Size: Table top L 2075 x W 700 mm.
Stock number: D1067, Table, stainless steel,, standing on legs., L 1340 x W 750 x H 570 mm., Material: Stainless steel AISI 304, Size: L 1340 x W 750 x H 570 mm.
Stock number: D1066, Table, stainless steel,, standing on legs with wheels., L 1100 x W 800 x H 800 mm., Material: Stainless steel AISI 304, Size: L 1100 x W 800 x H 800 mm.
Stock number: D1006, Table, stainless steel,, standing on legs with wheels., with grid-top., L 1000 x W 750 x H 740 mm., Material: Stainless steel AISI 304, Size: L 1000 x W 750 x H 740 mm.
Stock number: D1052, Table, stainless steel,, with stand for wall mounting., Sink L 880 x W 540 x H 240 mm.,, Table top L 2150 x W 700 mm., Material: Stainless steel AISI 304, Size: Table top L 2150 x W 700 mm.
Stock number: D1183, Circular table, standing on legs,, Ø 1500 mm. plastic plate., Dimensions: Ø 1500 mm. plastic plate.
Stock number: D1003, Table, stainless steel,, with wheels., L 1885 x W 885 x H 900 mm., Material: Stainless steel AISI 304, Size: L 1885 x W 885 x H 900 mm.
Stock number: D959, Tabletop, stainless steel,, with suction grid. L 800 x W 500 mm., L 1200 X W 800 mm., Material: Stainless steel AISI 304, Size: L 1200 X W 800 mm.
Stock number: D957, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table top, Size: L 1680 x W 800 mm., Sink: L 500 x W 400 x D 200 mm., Other: With ventilation.
Stock number: D693, Hose fluid bed table, stainless steel,, with heat and blower and timer,, with space for 5 pc. hose., L 3750 x W 620 mm., Material: Stainless steel AISI 304
Stock number: DT067, Tablet compressing machine,, Diaf type TMA special., 1 head,, manuel.
Stock number: DT055, Tabletmachine, Manesty type BB3B,, 27 stations for two-layertablets., Variable speed: 760-1520 tablets/min., Max tablet diameter: Ø 15,8 mm, Max pressure: 6,5 ton., The machine has been renovated.
A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible.
Co-ordinate Table HIRSCHMANN - DRO system HEIDENHAIN, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 400x240 mm, T-slots size: 10 mm, Number of t-slots: 4, Longitudinal travel x axis: 300 mm, Cross travel x axis: 200 mm
Inv. Num. : 8495 Type: WFQ 80 NCA Producer: TOS Generated: Parameters: Work table length: 1600 mm Work table width: 850 mm Maximum weight of the workpiece: 5000 kg X-axis travel: 1600 mm Y-axis travel: 1000 mm Z-axis travel: 950 mm Spindle diameter: 80 mm Machine weight: 22000 kg
Work table packing table workbench with stainless steel top, rear upstand and 2x lockable containers RA1802 Work table made of metal, painted white, used worktop with stainless steel surface (traces of wear) Dimensions: Width: 2200mm depth: 600mm height: 775mm Lockable container with door (1x left, 1x right) Container in 2 different colors (turquoise and purple) Container dimensions: 300 x 410 x 550 mm (WxHxD) All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics
SCM steep conveyors for transporting the glazing beads after the outlet of the SCM window system. The stone conveyor is 2.60 m. high with a 6 m. conveyor belt to transport a miter glazing bead saw The size is: 2.20 wide x 2.60 high with 1.20 feet made in stainless steel. Motor 7.5KW due to start-up The conveyor belt is 6.50 m. long x 100 mm wide in the channel.
GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataRapid traverse longitudinal/transverse/vertical40/40/40 m/minFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgMotor spindle 20,000 rpmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Tool magazine, chain vert., 60 pocketsTool magazine Vertical chain magazine basic with 60 magazine pockets SK 40 or optionally chosen spindle taper ...
GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataRapid traverse longitudinal/transverse/vertical40/40/40 m/minFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between ...
GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Cross650 mmLongitudinal735 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Sl ...
GeneralHighly productive compact machining centres; Control: Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical1-60000/1-60000/1-60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross420 mmVertical380 mmMiscellaneousClamping SystemMAS 403 - 45° Floor space/WeightDimensions (L x W x H)1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) mWeight approx.4100 KgSpindle speed up to 24,000 r.p.m. BT30Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan)TableTable surface 840 x 420 mmMaximum load (table centre) 300 KgSlot width 14 mmNumber of Slots 2Clamping grid M 12, 100 x 100 mmTool clamping for BBT 30 (Big+)Tool taper BBT 30 - Big+ Pull stud MAS 403 - 45°Tool magazine 25 placesTool magazine 25 places (suita ...
GeneralUniversal Milling Centre - Direct Measuring System X, Y, Z inclusive air purge for measuring system - Coolant Air-Blast Changeover external switchable via M-Function - DMG MORI NETservice - RMS device (Relocation Machine Security); Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsMovement X / Y / Z800/600/510 mmType of magazineChain Tool Magazine with60 PositionsClamping SystemDIN 69872 Spindle taperSK 40 DIN 69871 Drive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.12000 rpmRapid feed X / Y / Z42/42/42 m/minTable surfaceØ 800 x 620 mmMovement C-Axis360 degreeMovement B-Axis(-15/+110) degreeType of gripperDouble gripper Production Package 80 bar with chip conveyorProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 205 l (left) - Bed and ATC ar ...
GeneralVertical Machining Centre - Direct Measuring System X, Y, Z - Coolant air-blast changeover external switchable via M-Function; - Thermal compensation - DMG MORI NETservice; Control: DMG MORI ERGOline X Multi-Touch control Siemens CharacteristicsMovement X / Y / Z800/600/510 mmType of magazineChain Tool Magazine with30 PositionsClamping SystemDIN 69872 Spindle taperSK 40 DIN 69871 Drive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.15000 rpmRapid feed X / Y / Z42/42/42 m/minTable surfaceØ 800 x 620 mmMovement C-Axis360 degreeMovement B-Axis(-15/+110) degreeType of gripperDouble gripper Production Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar; - Chip conveyor (scraper type) with tank capacity: 205 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electr ...
Offer 25238 Specifications: - Max. load capacity with horizontal table top 350 Kg - Max. load capacity in all inclined positions 300 kg - Face plate diameter 400 mm - Through-hole / hollow shaft 125 mm - Face plate manually swivels left + right 0 - 90 ° - Rotary movement infinitely variable approx. 0.15 - 5.0 1/min - Right + Counterclockwise - E. footswitch - Welding current transmission approx. 350 A - Drive 400 V - Table height in horizontal position approx. 900 mm - Space requirement approx. W 1150 x H 900 x D 800 mm - Weight approx. 290 kg - Jaw chuck 250 mm
maximum number of results exceeded
please refine your search
