t30 used for sale

New 30.000 litre tank, Stock number: T30B4-1, Litre: 30.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 6 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 500 mm., Pipes: Top Ø 1½ og Ø 4 - Bottom Ø 2½”, Inner diameter: Ø 2500 mm., Cylinder: H 6000 mm., Total height: H 7100 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,05, Working pressure: None, Manufacturer: Handing

hours 1265 hours, operation unknown, battery empty Auction-ID: A1-41997-122

New 30.000 litre tank,, stainless acid proof steel AISI 316,, closed top, standing on 6 pc. legs., Conical top 15°., Conical bottom 20°., Tank cover on top Ø 500 mm., 1 pc. Ø 2½ connection piece in bottom center., 1 pc. Ø 4 connection piece on top., 1 pc. Ø 1½ connection piece in top center., Tank dimension Ø 2500 mm x shroud 6000 mm., The tank is made in stained plate type B2., All welds on the inside are grind grain 60., All welds on the outside are sandblasted., Density: 1.05, Work temperature: 0-+50°C., Work pressure: None., Scope of application: A, Litre: 30.000, Material: Stainless acid proof steel AISI 316

Nilfisk T30S Industrial Vacuum Cleaner - Used, Tested & Ready to Use - Top Condition! For sale is a powerful Nilfisk T30S industrial vacuum cleaner, ideal for workshops, production, construction and industrial applications. Specifications: • Model: T30S • Year of manufacture: 2011 • Voltage: 400 V / 3 phases • Power: 3.0 kW / 400 V, 50 Hz, 2840 rpm, 3 phases, 6.6 A, cos phi 0.90, Iso F, S1, IP55 • Container volume: approx. 100 litres • Vacuum -220 mbar, 130 m³/h Overpressure 278 mbar, 120 m³/h • Filter type: cartridge filter • Weight: approx. 103 kg • Condition: used, fully functional Scope of delivery: • Vacuum cleaner Nilfisk T30S •Hose • Original chassis Condition: The device has been tested – motor runs smoothly and powerfully. Filters and containers were cleaned. Shipping / Pickup: • Pick-up preferred (heavy equipment)  ...

Mapelli 300ton downstroke hydraulic presses with vacuum, Type T300, year 1990, 4 column type, with pneumatic front guard, fixed guards to sides and rear, main ram dia 450mm, with pull back rams, single daylight 500mm, with 600mm wide x 700mm electrically heated platens. With hydraulic power unit mounted on top. Complete with controls etc and in good condition.

Rotary tablet press Killian, model T300-32 EU-B Year of construction: 1996 One pair presser rollers respectively for pre-pressure and main pressure. Designed for high press speeds; operated mainly from the front using the hour hand wheels, the controls and via the terminal. Excellent, in full working condition. Technical Information: - Height with hopper: 1852mm (height without hopper: 1692mm) - Machine weight: 1950kg - Max tablet diameter: 16mm - Max fill depth: 16mm - Max output: 240,000 tablets per hour - Max operating pressure 80kN - B type machine – EUR B - 32 stations - Fill System - force feeder Electrical upgrade in 2010 – new PLC and touch screen HMI.

Due to production change, we are selling our still very young Fessmann Smoke/Cooking System T3000, oil-fired Bj 2022 Height 100cm Car size 198x104x102 Control: FoodCon.2 Touch 12" Incl. cooling coil and cooling machine 3.3kw autom. pneumatic door opener Voltage: 400V Front door hinge on the left Smoke Introduction: Top Complete system package: incl. matching grater smoke generator: RR325 M suitable for beech/oak/spruce wood incl. matching refrigeration dryer Beko model DPRA50 incl. matching refrigeration machine / outdoor installation 3.3kw

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch -Manufacturer: Kraus & Naimer, Main switch, Load break switch 80 A -Type: KG80.T304 -Rotary drive: -Dimensions: 110/95/H130 mm -Weight: 0.8 kg

Technical data: Diameter over bed: 625 mm Turning length: 1500 mm Diameter via slide: 325 mm Spindle head shape: Cam-Lock Spindle drilling diameter: 105 mm

The machine is completely overhauled and is then as good as new! The machine gets a completely new electric satisam with our control system. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Z axis designed for max. Drilling depth 1000 mm

Ex signal isolator, isolated barrier -K series -Product number: 14493S -Explosion proof -Number: 5x available -Price: per piece -Dimensions: 95/70/H18 mm -Weight: 0.1 kg

Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-s ...

turning diameter: 330 mm turning length: 669 mm control: Sinumerik 828D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 828D 12-fold revolver Sauter VDI40 driven tools C-axis 3-jaw chuck Tool Eye part catcher chip conveyor tail stock coolant device with high pressure pump bar loading device Iemca Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 600 mm max. Drehdurchmesser / max. turning diameter 330 mm max. Drehlänge / max. turning length 669 mm X-Weg / X-travel 260 mm Z-Weg / Z-travel 762 mm Drehzahl / spindle speed 3400 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes max. Stangendurchmesser / max. bar diameter 75 mm Eilgang X / rapid feed X 20 m/min Eilgang Z / rapid feed Z 24 m/min. Gewicht der Maschine ca. / weight ca. 5700 kg Technische Daten, Zu ...

Nominal drilling depth 750 mm Full drilling in steel approx. 30 mm Spindle speed max. 5700 min-1 Clamping table 1280 x 420 mm Transverse Sliding Table Coolant tank Miscellaneous Accessories

range L-W-H: 790 x 460 x 960 mm weight: 70 kg : 7 St. Tool trolley with 7 drawers equipped with tools - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - Drawer 1 1/4 premium ratchet. 1/4 knee joint 45 mm. 1/4 extension 100mm. 1/4 socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4 long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8 premium ratchet. 3/8 knee joint 55 mm. 3/8 extension 150mm. 3/8 socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8 long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2 premium ratchet. 1/2 knee joint 75 mm. 1/2 extension 125mm. 1/2 Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm. 1/2 Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm. - DRAWER 2 Ring, ratchet and socket wrench set consisting of. Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22 ...

range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4 inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8 inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2 inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm  ...

1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...

For sale are several screw jacks from the manufacturer NEFF Gewindetriebe GmbH, type C3-RF-6-T30x6, in various designs. These are new or unused components. Basic technical data (slightly different depending on the model): - Type: C3-RF-6-T30x6 - Size: C3 - Ratio: i = 6:1 - Stroke: 300 mm - Installation position: vertically upwards - Spindle type: rotating spindle - Trapezoidal lead screw: TGS-R-30x6-RH - Operating torque: approx. 6.1 Nm / Starting torque: approx. 8.5 Nm - Total lengths: 450 mm or 496 mm depending on the model - Special designs: Models with bellows and adapter available - Spindle nut: Bronze, Ø 60 mm Hint: There are several variants available. Details on the execution can be requested individually.

Complete set with fully ground various sizes of wood, stone, metal drills, sockets, screwdriver bits and bit holder. In handy plastic case. Contents: Metal drill bits cylindrical (HSS-R) 2 - 3 (2X) - 4 - 5 - 6 Wood drill bits cylindrical 3 (2X) - 4 - 5 (2X) - 6 - 8 Stone drills cylindrical 6 (2X) - 7 - 8 Speed drills 12 - 16 1/4\" Shape E Magnetic Sockets: 6 - 8 - 10mm 1/4\" Shape C bits length 25mm Torx T10 - T15 - T20 - T25 - T30 - T40 Slot SL0.5X4 - SL0.6X4.5 - SL0.6X5 - SL1.2X7 Phillips PH1 (2X) - PH2 (3X) - PH3 (2X) Crosshead Pozidriv PZ1 (2X) - PZ2 (11X) - PZ3 (2X) Allen key H4 - H5 - H6 - H7 Take-away pack with 25x PZ2 1/4\" Shape E bits length 50mm Torx T20 - T30 Kruiskop Phillips PH1 - PH2 (3X) - PH3 Crosshead Pozidriv PZ1 - PZ2 (3X) - PZ3 1/4\" Shape E Magnetic Bit Holder 1/4\" Form E Countersink Hole saw adapter and hole saws 32 - 38mm Complete set with fully ground vario ...

Complete set with fully ground various sizes of wood, stone, metal drills, sockets, screwdriver bits and bit holder. In handy plastic case. Contents: Metal drill bits cylindrical (HSS-R) 2 - 3 (2X) - 4 - 5 - 6 Wood drill bits cylindrical 3 (2X) - 4 - 5 (2X) - 6 - 8 Stone drills cylindrical 6 (2X) - 7 - 8 Speed drills 12 - 16 1/4\" Shape E Magnetic Sockets: 6 - 8 - 10mm 1/4\" Shape C bits length 25mm Torx T10 - T15 - T20 - T25 - T30 - T40 Slot SL0.5X4 - SL0.6X4.5 - SL0.6X5 - SL1.2X7 Phillips PH1 (2X) - PH2 (3X) - PH3 (2X) Crosshead Pozidriv PZ1 (2X) - PZ2 (11X) - PZ3 (2X) Allen key H4 - H5 - H6 - H7 Take-away pack with 25x PZ2 1/4\" Shape E bits length 50mm Torx T20 - T30 Kruiskop Phillips PH1 - PH2 (3X) - PH3 Crosshead Pozidriv PZ1 - PZ2 (3X) - PZ3 1/4\" Shape E Magnetic Bit Holder 1/4\" Form E Countersink Hole saw adapter and hole saws 32 - 38mm Complete set with fully ground vario ...

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

Operating Weight: Approx. 7,000 kg Engine: Yuchai YC4DK85-T300, EURO V Power Output: 62.5 kW / 85 HP / 2200 rpm Max Torque: 340 Nm / 1400–1700 rpm Displacement: 3.6 L Hydraulics: Lonking main valve + swing motor Hydraulic Flow: Up to 30 L/min Controls: Hydraulic-electric joysticks Tires: 8.25-16 industrial-grade pneumatic tires Drive: 4-wheel drive (optional locking differential) Max. Travel Speed: 28 km/h Max. Digging Depth: ~3,500 mm (depending on arm config) Cabin: Enclosed with heat and ventilation system Swing Speed: ~9 rpm Attachment Compatibility: Standard bucket + quick coupler; Supports Hammers, Augers, Grapples, etc.

With a robust operating weight of 8,500 kg, the RB 85 offers greater lifting capacity and stability while maintaining the speed and efficiency of a road-ready machine. Operating Weight: 8,500 kg Engine: Yuchai YC4DK85-T300, EURO V Power Output: 62.5 kW / 85 HP at 2200 rpm Max Torque: 340 Nm at 1400–1700 rpm Displacement: 3.6 L Hydraulic System: Lonking main valve + swing motor Hydraulic Flow: Up to 30 L/min Controls: Hydraulic-electric joysticks Tires: 8.25-16 heavy-duty pneumatic tires Drive: 4-wheel drive (with optional differential lock) Max. Travel Speed: 28 km/h Max. Digging Depth: 3556 mm (depending on boom config) Cabin: Fully enclosed with ergonomic seat, climate control, and wide visibility Swing Speed: 9 rpm Attachment Interface: Quick coupler standard; supports hydraulic hammers, augers, grapples, and more

600 litre, Stock number: T3070, Hopper, stainless steel,, open top, standing on legs., Conical bottom,, sliding draught in the bottom, 75 x 150 mm., Ø 950 mm., Litre: 600, Material: Stainless steel AISI 304

350 litre, Stock number: T3012, Hopper, stainless steel,, open top, standing on legs., Strengthening ring in the top,, detachable sieve., Ø 1200 mm., Litre: 350, Material: Stainless steel AISI 304

10.000 litre, Stock number: T3067, Tank, stainless steel,, closed top, standing on legs., Dished top and bottom., Bolted tank cover in the side., Ø 1900 mm., Litre: 10.000, Material: Stainless steel AISI 304

850 litre, Stock number: T3095, Litre: 850, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vat, Standing: 4 pcs. legs, Top: Open with strengthening ring, Agitator: From bridge at the top, Agitator type: Rotofoil, Motor: 0,25 kW - 380 Volt - 107 rpm., Dimensions: L 1100 x W 920 x H 1710 mm.

12.000 litre, Stock number: T3048, Tank, stainless steel,, lying on legs., Conical end bottoms,, tank cover in the end bottom., Tank cover in the top (no lid)., Ø 2000 mm., Litre: 12.000, Material: Stainless steel AISI 304

125 litre, Stock number: T3091, Litre: 125, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. of legs, Top: Open with lid, Bottom: Dished minus bottom, Agitator: In top from bridge, Motor: 0,55 kW - 220/380 Volt - 26 rpm, Inner diameter: Ø 550 mm., Total height: 1460 mm., Manufacturer: Pasilac, Model/type: D-2

Key data: 4 Meter, 13 t

Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 033.100 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 4 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty: 18 months from th ...

1.460 litre, Stock number: T3093, Litre: 1.460, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 2 pcs., Item: Tank, Standing: 3 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 450 mm., Inner diameter: Ø 1100 mm., Outer diameter: D 1230 mm., Manufacturer: SRS

Key data: 4 Meter, 13 t

Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 039.660 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 3 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty 24 months from th ...

600 litre, Stock number: T3089, Litre: 600, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Open with strengthening ring, Bottom: Dished, Agitator: From bridge at the top, Agitator type: Dissolver agitator, Motor: 6,6 kW - 380/660 Volt - 725 rpm., Inner diameter: Ø 900 mm., Total height: 2200 mm.

2.0 t capacity, 80x40x1200 mm tines, with Bobcat T30.60 & T35.105 telescopic handler mount

400 litre, Stock number: T3074, Litre: 400, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On legs with fork grib, Top: Dished, Bottom: Conical, Inspection cover: In the top, Inner diameter: Ø 680 mm., Total height: 1500 mm., Manufacturer: Dairy Fruit, Model/type: FL 400 l/2000

250 litre, Stock number: T3077, Litre: 250, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Closed, with hinged lid, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Agitator type: Rotostat X homogenizing, Motor: ¼ kW - 380 Volt - 1450/2830 rpm., Inner diameter: Ø 625 mm., Total height: 2400 mm.

1.300 litre, Stock number: T3073, Litre: 1.300, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs with truck grip, Top: Open, Bottom: Conical, Inner diameter: Ø 1000 mm., Total height: 2250 mm., Other: sliding draught outlet in the bottom

1.500 litre, Stock number: T3058, Litre: 1.500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Transportation tank, Standing: In galvanized frame, Bottom: Conical, Tank cover: In the top, Ø 500 mm., Dimensions: L 1200 x B 1000 x H 2460 mm., Manufacturer: Bison

500 litre, Stock number: T3031, Litre: 500, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On 4 pcs. of legs on a painted foundation, Top: Conical, Bottom: Conical, Double jacket: Yes, Inspection cover: In the top, Ø 230 mm., Agitator: Yes, Ystral, Agitator type: 3-bladed propeller, D 120 mm., Motor: 3,3/5,5 kW - 220 Volt - 1430/2850 rpm., Inner diameter: Ø 700 mm., Outer diameter: D 760 mm., Total height: 2930

7.500 litre, Stock number: T3040, Tank, stainless acid proof steel,, closed top, standing on legs., Insulated, outer riveted stainless cladding,, conical top and bottom., Tank cover in the top,, Ø 2050 mm., Litre: 7.500, Material: Stainless acid proof steel AISI 316

4.300 litre, Stock number: T3015, Tank, stainless acid proof steel,, closed top, standing on legs., Double jacket., Dished top and bottom,, tank cover in the top., Flange for agitator in the top., Turbular plates in the side., Ø 1500 mm., Litre: 4.300, Material: Stainless acid proof steel AISI 316

350 litre, Stock number: T3013, Litre: 350, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. of legs, Top: Open with lid, Bottom: Conical, Agitator: Yes, Agitator type: Frame agitator, Motor: 4 HK - 380 Volt, Inner diameter: Ø 800 mm., Outer diameter: D 900 mm., Total height: 2000 mm.

445 litre, Stock number: T3010, Litre: 445, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 6 pcs., Item: Tank, Standing: 4 pcs. of legs, Top: Conical, Bottom: Conical, Tank cover: In the top, Ø 400 mm., Agitator: From the tank cover, Agitator type: Propeller, Motor: 0,55 kW - 220/380 Volt - 180 rpm., Dimensions: L 950 x W 750 x H 1440 mm., Manufacturer: Umformtechnik Hausach GmbH

T type milling machine TIGER TMT 5 RT - CNC SELCA 4045 - head type T30 Index 2,5°, Rotary table capacity 6.000 kg, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Rotary table dimension: 1550x1300 mm, Maximum table load: 6.000 Kg, Cross travel x axis: 2000 mm, Vertical travel y axis: 1550 mm, Longitudinal travel w axis: 1050 mm, Working feed x-y-w axes: 0 - 60.000 mm/1, Rapid feed x-y-w axes: 12.000 mm/1, Spindle taper: 50-DIN69871, Spindle speed: 0 - 3000 rpm, Number of spindle speeds: 2, Cnc: SELCA 4045, Weight: 15.000 Kg

This 6-axis TRUMPF TRUBEND 3180 hydraulic press was manufactured in 2013. It features a bending capacity of 1800 kN and a bending length of 4140 mm. The machine includes a CNC control Delem T3000, a quick clamp system, and a 4-axis CNC backgauge with X, R, Z1, Z2. It operates on 400 V with a power consumption of 18.5 kW. Consider the opportunity to buy this TRUMPF TRUBEND 3180 hydraulic press. Contact us for more information about this machine.

This concerns an unused product, consisting of article number: 10002GP, Hex head wrench set 7 piece 2.5-10mm, gopart, quantity: 15, article number: 10370GP, Axe 370mm, gopart, quantity: 3, article number: 11006GP, Bench Vice 6\" / 150mm, gopart, quantity: 1, article number: 22200GP, Screw clamp 100x200mm, gopart, quantity: 6, article number: 33000GP, Claw hammer 450g, gopart, quantity: 16, article number: 55002GP, Rule, 2m, wooden, folding, quantity: 20, article number: 55005GP, Tape measure 19mm - 5m, gopart, quantity: 22, article number: 56103GP, Tape measure 13mm-3m, gopart, quantity: 6, article number: 77310GP, Screwdriver Torx® T10, gopart, quantity: 31, article number: 77325GP, Screwdriver Torx® T25, gopart, quantity: 18, article number: 77330GP, Screwdriver Torx® T30, gopart, quantity: 45, article number: 88014GP, Combination spanner 14mm, gopart, quantity: 12, article number:  ...

This concerns an unused product, consisting of article number: 10370GP, Axe 370mm, gopart, quantity: 2, article number: 22200GP, Screw clamp 100x200mm, gopart, quantity: 5, article number: 33000GP, Claw hammer 450g, gopart, quantity: 16, article number: 33015GP, Machinist hammer 1500g, gopart, article number: 55002GP, Rule, 2m, wooden, folding, quantity: 18, article number: 55005GP, Tape measure 19mm - 5m, gopart, quantity: 21, article number: 56103GP, Tape measure 13mm-3m, gopart, quantity: 5, article number: 77310GP, Screwdriver Torx® T10, gopart, quantity: 31, article number: 77325GP, Screwdriver Torx® T25, gopart, quantity: 17, article number: 77330GP, Screwdriver Torx® T30, gopart, quantity: 44, article number: 88014GP, Combination spanner 14mm, gopart, quantity: 11, article number: 88020GP, Combination spanner 20mm, gopart, quantity: 33, article number: 88600GP, Adjustable wrenc ...

This concerns an unused product, consisting of article number: 10370GP, Axe 370mm, gopart, quantity: 2, article number: 10600GP, Wrecking bar 24\", gopart, article number: 22200GP, Screw clamp 100x200mm, gopart, quantity: 5, article number: 33000GP, Claw hammer 450g, gopart, quantity: 16, article number: 55002GP, Rule, 2m, wooden, folding, quantity: 19, article number: 55005GP, Tape measure 19mm - 5m, gopart, quantity: 22, article number: 56103GP, Tape measure 13mm-3m, gopart, quantity: 5, article number: 77310GP, Screwdriver Torx® T10, gopart, quantity: 31, article number: 77325GP, Screwdriver Torx® T25, gopart, quantity: 17, article number: 77330GP, Screwdriver Torx® T30, gopart, quantity: 44, article number: 88014GP, Combination spanner 14mm, gopart, quantity: 11, article number: 88020GP, Combination spanner 20mm, gopart, quantity: 33, article number: 88600GP, Adjustable wrench set ...

This concerns an unused product, consisting of article number: 10370GP, Axe 370mm, gopart, quantity: 2, article number: 11006GP, Bench Vice 6\" / 150mm, gopart, quantity: 1, article number: 22200GP, Screw clamp 100x200mm, gopart, quantity: 6, article number: 33000GP, Claw hammer 450g, gopart, quantity: 16, article number: 55002GP, Rule, 2m, wooden, folding, quantity: 19, article number: 55005GP, Tape measure 19mm - 5m, gopart, quantity: 22, article number: 56103GP, Tape measure 13mm-3m, gopart, quantity: 5, article number: 77310GP, Screwdriver Torx® T10, gopart, quantity: 31, article number: 77325GP, Screwdriver Torx® T25, gopart, quantity: 17, article number: 77330GP, Screwdriver Torx® T30, gopart, quantity: 45, article number: 88014GP, Combination spanner 14mm, gopart, quantity: 11, article number: 88020GP, Combination spanner 20mm, gopart, quantity: 34, article number: 88600GP, Adj ...

Hand tool set 120-piece in Mbox number 1 consisting of: 50-piece screwdriver bit set 25mm 1/4\" shape C: 6x Slot Bits: [S3 / S4 / S5 / S5.5 x2/ S6 ] 10x Phillips bits: [PH0 x2 / PH1 x2 / PH2 x3 / PH3 x3] 10x Pozidriv Bits: [PZ0 x2 / PZ1 x2 / PZ2 x3 / PZ3 x3] 10x Torx bits: [T8 / T9 / T10 / T15 x2 / T20 / T25 / T27 / T30 / T35 / T40] 10x Torx bits security/anti-tamper head; [T8H / T9H / T10H / T15H x2 / T20H / T25H / T27H / T30H / T35H / T40H] 4x Allen / Hex Bits: [H3 / H4 / H5 / H6] 40-piece socket set in various sizes in mm: 13x 1/4\" sockets [4 / 4.5 / 5 / 5.5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 /14] 14x 3/8\" sockets [8 / 9 / 10 / 11 / 12 / 13 / 14/ 15 / 16 / 17 / 18 / 19 / 20 / 21] 5x 1/4\" E-torx sockets [ 4 / 5 / 6 / 7 / 8] 6x 3/8\" E-torx sockets [10 / 11 / 12 / 14 / 16 / 18] 1x 3/8\" ratchet 1x 1/4\" bit screwdriver 7x combination spanners [8 / 10 / 11 / 12 / 13 / 14 / 15 mm]  ...