t slot used for sale

Bitzer refrigerant compressors unit Type: HSK7461-80-40P (x3) Volume: 220 m3/h (x3) Cooling capacity for R404A: 560 kW at - 5°C/40°C, 477 kW at -10°C/40°C, 338 kW at -20°C/40°C Dimensions: 4500 x 1200 x 2300 mm Condenser Thermofin Type: X-TCH 100.1-25-B-N(D5/S5) Cooling capacity: 963/852 KW Air flow: 295 000 / 234 000 m3/h Number of fans: 10 x 1000 mm Dimensions: 9800 x 2300 x 1600 mm Volume: 229.3 L Weight: 1 929 kg Control panel Dimensions: 2400 x 600 x 2000 mm

Bitzer refrigerant compressors unit Type: HSK7471-90-40P (x3) Volume: 250 m3/h (x3) Cooling capacity for R404A: 531 kW at -5°C/40°C, 435 kW at -10°C/40°C, 280 kW at -20°C/40°C Dimensions: 4500 x 1200 x 2300 mm Condenser Thermofin Type: X-TCH 100.1-26-B-N(D5) Cooling capacity: 1103 / 997 KW Air flow: 354 000 / 281 000 m3/h Number of fans: 12 x 1000 mm Dimensions: 11 800 x 2300 x 1600 mm Volume: 276 L Weight: 2 400 kg Control panel Dimensions: 2400 x 600 x 2000 mm

electric motor, three-phase motor -Manufacturer: elsto, electric motor type AM-TK71BA2 -Power: 0.55 kW -Speed: 2640 rpm -Shaft: Ø 14 x 30 mm -Design: B3 -Protection class: IP 55 -Dimensions: 300/185/H145 mm -Weight: 8.3 kg

Electric motor, three-phase motor -Manufacturer: Verhagen, electric motor type 4P.T063D -Power: 0.37 kW -Speed: 1340 rpm -Shaft: Ø 11 x 17 mm -Construction: B14 -Protection class: IP 55 -Dimensions: 215/165/H130 mm -Weight: 4,8 kg

Engine – TBG 616 V 8 K - Approx. 72,500 operating hours - Landfill gas - Engine number 2205942 - Built in 2005 Generator – Marelli M8 B400S4B20 More pictures, information and offers on request. Viewing is possible at any time by appointment. Location: 49811 Lingen / Ems Subject to prior sale

Key data: 1400 KW, 1800 kVA, 400 V

MWM Power Generator TBG620-V16K Gas generator set from 2004, Scope of delivery: as shown, generator defective with base frame. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2205165 Power [KW]: 1.400 Year of construction: 2004 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 0132701/03 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2004 Weight [kg]: 3.700

Key data: 1400 KW, 1800 kVA, 400 V

Gas generator set from 2005, Scope of delivery: Base frame and generator, as shown with missing parts. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2205551 Power [KW]: 1.400 Year of construction: 2005 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 00145797 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2005 Weight [kg]: 3.700

Geared motor, electric motor, electric geared motor -Manufacturer: Motovario gearbox type NMRV/030 -Speed: 91 rpm i 15.0 -Engine: Neri Motori type T56B4 -Power: 0.09 kW / 1360 rpm -Hollow shaft: Ø 14 x 60 mm -Protection rating: IP55 -Dimensions: 265/110/H155 mm -Weight: 4 kg

Key data: 1344 KW, 1680 kVA, 400 V

Used CHP power plant, install in French hospital in Marseille Gas generator MWM DEUTZ Model TBG620V16K Power 1680 kVA year of manufacture 1996 Running hours 30.000 Natural gas supply with control panel Transformers 1600 kva Gas train Table cooler Heat exchanger Price 30.000 €

Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel, keyboard -Manufacturer: Witron, Teubner Metalwo Panel Display -Type: TAST21-IBS-S2-T2 -Number: 2x panel available -Price per piece -Dimension: 270/65/H220 mm -Weight: 1.8 kg/pc.

Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Günther, Attachment reamer, machine reamer, Titex-Special -Socket: conical Ø 17-19 mm -Diameter: 37 mm -Dimensions: Ø 37 x 56 mm -Weight: 0.2 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, double hydraulic pump -Manufacturer: Orsta, double hydraulic pump -Pump 1: Type A 6.3 R -Pump 2: Type C 16-2 R -Motor: VEM KMR 112 M4 5.5 kW / 1440 rpm -Total dimensions: 725/250/H290 mm -Weight: 65 kg

vacuum furnace, chamber furnace -Vacuum furnace: with vacuum pump -Chamber size: D500/W400/H400 mm -Thermostat: up to max. 320°C -Vacuum pump: power 1.1 kW -Total dimensions: 890/800/H1785 mm -Weight: 180 kg -Control: Two-point control using program control

Transnorm conveyor belt GF 6600-600-500 RA2137 Technical data: Conveyor length (NL): 6600 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R32DT71D4 Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 6600 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentrala ...

Electric motor, three-phase motor -Manufacturer: ATB, electric motor 80S 3327277-056 -Type: TAF 0.55/4-7 -Power: 0.185 KW -Speed: 1400 rpm -Shaft: Ø 20 x 60 mm -Type: B5 -Protection class: IP44 -Dimensions: 230/148/148mm -Weight: 8.1 kg

Control module, compact control unit, fan coil control, electronic module -Manufacturer: Meitav-tec, Universal Fan Coil Control -Type: MIGA1-FC-SUPER -Operating voltage: 230 volts -Cardboard dimensions: 170/90/H45 mm -Weight: 0.5 kg

Transnorm conveyor belt GF 1000-600-500 RA2125 Technical data: Conveyor length (NL): 1000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R17 DRS71S4/MM05/LN Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 1000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m ...

1 TRÜTZSCHLER opening line year 1999 composed of: conveyor feed with 500 cm length and 120 cm width, 1 TRÜTZSCHLER type BOWA with weigth pan, 2 TRÜTZSCHLER weighing feeder type PWSE 1200, 1 TRÜTZSCHLER Tuftmixer type FMN, 1 TRÜTZSCHLER fine opener Tuftomat type TFV1 1 TRÜTZSCHLER opening line year 1999 composed of: conveyor feed with 500 cm length and 120 cm width, 1 TRÜTZSCHLER bale opener type BO 1200, year 1999, 1 TRÜTZSCHLER fine opener Tuftomat type TFV1, year 1999 3 TRÜTZSCHLER material reserve with trunk and condensor type MS, year 1999 1 TRÜTZSCHLER fine opener with feed trunk and condensor type FD-S, year 2004

Recon Part Number: 1231 6778 1231 6780 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

balancer, machine balancer, spring balancer, cable extension, weight compensator -Manufacturer: Fein, Balancer spring balancer -Load capacity: 1-3 kg -Number: 2x spring balancer available -Price: per piece -Dimensions: 260/200/135 mm -Dependent weight: 3 kg/piece

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Neri, gear motor -Gear: Speed: approx. 105 rpm -Engine: Type T63BN/4 -Power: 0.18 kW / 1400 rpm -Shaft: Ø 25 x 80 mm -Protection class: IP54 -Dimensions: 365/125/H165 mm -Weight: 8.1 kg.

Recon Part Number: 1214 1705 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 0400 9747 Old socket with slanted injector insert Casting 1230 2010 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Transnorm conveyor belt GF 14500-700-600 RA2147 Technical data: Conveyor length (NL): 14500 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,25 Drive: SEW gear motor, R27 DRE80M4/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 14500 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor speed  ...

Radio system, antenna contact module, wireless RF modem, Modbus -Manufacturer: TRL, radio system wireless RF modem ovp -Type: IRIS RS485-EXT-02 -Number: 2x module available -Price per piece -Dimension: 135/65/H30 mm -Weight: 0.1 kg

Radio system, antenna contact component, wireless RF modem, pico cell antenna -Manufacturer: CP Technologies, Pico Cell Antenna 2.4 GHz Ovp -Type: WAN-2185 -Number: 2 antennas available -Price: per piece -Cardboard dimensions: 280/240/H85 mm -Weight: 0.7 kg

Ref. -No.: 10370 Manufacturer: FANUC Year of construction: 1997 Type of control: CNC Control: FANUC Series 16-M Storage location: Halberstadt Country of origin: Irland X-Travel: 500 mm Y-Travel: 380 mm Z-Travel: 300 mm Machine length: 1560 mm Machine width: 2060 mm Machine Height: 2218 mm Rotary Table (Lxw): 650 x 380 mm Table Load: 200 kg Max. Tool Weight: 2 kg Max. Tool Length: 120 - 200 mm Max. Tool Diameter: 65 mm Tool change time: 1 s Tool Taper: MAS BT30, MAS P30T-1 (45°) Numbers Of Tools In Magazin: 10 Tool changer: Revolvertyp (Spindel unabhängig vom Revolver) Turning Speed Range - Stepless: 1-15000 mm / min Rapid Traverse X-Axis: 48 m / min Rapid Travel Y-Axis: 48 m / min Rapid Traverse Z-Axis: 48 m / min Weight Of The Machine Ca.: 1,7 t Max spindle speed: 8000 min⁻¹ Positioning accuracy in one direction (1): 0,006 / 300 mm Positioning repeatability (2): +/- 0,002 mm ...

Ref. -No.: 10142 Manufacturer: TIBO Year of construction: 2002 Type of control: CNC Control: Siemens Sinumerik 802D Storage location: Halberstadt Country of origin: Deutschland Drilling diameter: 1-13 mm Bore Depth: 250 mm Drilling spindle speed: 11.000 RPM X-Travel: 300 mm Y-Travel: 210 mm Z-Travel: 250 mm Machine weight: 2,5 t Further information: - With equipment

Disc valve, flapper valve, ball valve, butterfly valve, gate valve, gate valve, diaphragm valve, diaphragm stop valve -Manufacturer: Sisto, gate valve diaphragm valve orig -Type: THM6-02 DN40 PN40 A105 H.64806 -Number: 2x valve available -Price per piece -Dimension: 285/140/H200 mm -Weight: 6.4 kg/pc.

Ref. -No.: 10319 Manufacturer: TAKANG Type of control: Digitalanzeige ACU-Rite Control: Konventionell Storage location: Halberstadt Country of origin: Taiwan Weight Of The Machine Ca.: 1,3 t Swing diameter over bed: 430 mm Bed width: 300 mm Tip length: 1500 Centre Height: 215 mm Bed length: 1600 mm

Ref. -No.: 10320 Manufacturer: TOS Type of control: Digitalanzeige - Mitutoyo Control: Konventionell Storage location: Halberstadt Country of origin: Tschechien Tip length: 1500 Centre Height: 280 mm Centre Distance: 750,1000,15000,2000 mm Spindle Bore: 56 mm Swing diameter over bed: 500 mm Number of speed levels: 18 Circumferential diameter over the support: 320 mm Circumferential diameter over the bed recess: 560 mm Bed length relieved from headstock: 300 mm Universal chuck diameter: 250 mm Diameter of the clamping disc: 500 mm Further information: Universal center lathe

Ref. -No.: 10316 Manufacturer: TOS Year of construction: 1996 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Slovakia Machine length: 3450 mm Machine width: 2236 mm Machine Height: 2000 mm Weight Of The Machine Ca.: 4,4 t Grinding wheel: 260 mm Table Dimensions (Lengthxwidth): 1500 x 400 mm Height of grinding with new grinding wheel (without magnetic plate): 500 mm Grinding wheel fx width x bore: 350 x 40 - 80 x 127 mm Width of the composite grinding wheel: 200 mm Max. load on the work table: 5000 N Table surface: 400x1000 / 1500 mm Max. distance of the spindle axis: 675 mm Max. length of grinding: 1000/1500 mm

Inductive sensor, electronic sensor, sensor cable, connection cable, connection cable -Manufacturer: Telemecanique, ready-made sensor cable orig -Type: XZC-P1164L10 -Order No.: 076312 -Number: 17x cables available -Price per piece -Dimensions packaging: Ø 210 x 40 mm -Weight: 0.5 kg/pc.

Inductive sensor, electronic sensor, sensor cable, connection cable, connection cable -Manufacturer: Telemecanique, ready-made sensor cable orig -Type: XZC-P1164L5 -Order No.: 076311 -Number: 10x cables available -Price per piece -Dimensions packaging: Ø 190 x 30 mm -Weight: 0.3 kg/pc.

roller chain, drive chain -per package: Length: 5 m -Size reinforced: 16B-1 1-way 1 x 17.02 -Quantity: 23 x pieces packages available -Price: per package -Package weight: 14 kg/piece

Ref. -No.: 10301 Manufacturer: TITAN Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Dia. Of Grinding Wheel: 280-500 mm Grinding Wheel Width: 80-100 mm

Balancer, machine balancer, spring balancer, cable extension, weight compensator -Manufacturer: KW, spring balancer type F2 with locking mechanism -Load: 98-176 N -Cable extension: 1.9 m -Quantity: 2x spring balance available Price: per piece -Dimensions: 225/125/H340 mm -Weight: 10.3 kg/pc.

echnical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg

BM-TEC Fat Baking Line Year of construction 2015 Stainless steel total 3 pieces High-voltage connection up to 200°C digital control / control unit Automatic feeder Electric Lifting + Lowering Height: 105cm Width: 390cm Depth: 10cm

Miwe rack oven Type: Roll-In e+ RI 1 0610-TXXL Year of construction: 2020, 2019, 2017 and 2016 with fuel oil burner (convertible to gas burner) Stainless steel cladding for 1x trolley 58×98cm with extractor hood and fan with drive-on ramp 400/230V 3/N/PE 50Hz very good condition Height: approx. 263cm Width: approx. 160cm Depth: approx. 160cm

Key data: 750 kN, 150 mm

Control: STE 328-89-1 1/2" complete TOX Powerhouse: S75.160.200.12D Table size: 996 x 695 mm Installation height: 600 mm Total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V

Computer cabinet, control cabinet, terminal cabinet, terminal housing, control panel stand housing, control panel stand foot, stand column -Stand: stand housing for control desks / terminals -Execution: solid metal housing -Dimensions: see photos -Dimensions: 385/335/H730 mm -Weight: 32 kg

Tecnopool spiral cooler, model: TW650 Raffreddamento - type: TW 3 650 1491, 400 V, 3 Ph, 50 Hz, 60 A - north - south, plastic mesh belt - model: SX, number: 2PO400066 - tape width: 630 mm - product height: 100 mm - insertion height: 1000 mm - exit height: 4500 mm, 25 floors - 2 Alfa Laval evaporators - 3 fans each - model: ILBWH632GD - serial number: AA2257461 - year of production: 2011 - overall dimensions: 8400 mm x 5300 mm x 5300 mm - total length of the belt 422 m DISMANTLED

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Asada, Die Head Model T20129 -pipe size. 1/2 to 2 -Dimensions: 310/280/90 mm -Weight: 6 kg

150 m pallet rack Jungheinrich type MPB Used goods very good condition, see pictures Height 3.9 m Depth 110 cm, blue Load 8.4 tons Beam length 2.7 m yellow Carrier with ballast /compartment 2400 kg Negotiation price: € 8.990,-- net from stock Offer consists of: + 52 pcs. frame pre-assembled, depth 110 cm, height 3.9 m +204 pcs. beam, length 2.8 m, 2400 kg ballast/compartment +408 pcs. Suspension locks +208 pcs Concrete Anchor Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers. (Changes and errors in the technical data, information and prices as well as prior sale ...

32 Sulzer TW11 130” narrow single colour and MW Serial 45000 to 69000 18 machine MW 14 machine single colour Accessories Per Loom 6 Harness shafts 6 Frames 6 Cam Heald wire, and dropper as one machine 1 Beam 1 Cloth role 1 IRO Looms are running and in very good condition

Car jack, jack stand, lifting jack, bottle jack, mechanical jack, axle jack -Manufacturer: Holmatro, Mechanical jack 50 ton -Type: JJ-5013 -Stroke: 125 mm -Shaft: Ø 87 mm -Number: 3x lifting jack available -Price: per piece -Dimensions: 280/220/H295 mm -Weight: 30 kg/piece

Oil hand pump, oil cabinet, oil cabinet, oil conveyor, oil dispenser, oil dispenser, oil station -Manufacturer: workshop technology, mobile oil dispenser with hand pump -Tank capacity: approx. l -Pump: hand operated -Hose: lockable with tap -Dimensions: 430/400/H770 mm -Weight: 15 kg

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Telemecanique, Contactor Square D -Type: LC1D096 LR3D 146 -Number: 1x contactor available -Price per piece -Dimension: 125/45/H85 mm -Weight: 0.5 kg/pcs

Twino Double Arm Dough Machine Advantages: less dough heating, gentle kneading process Tabletop Simple digital control Timer with 5 speeds and 10 kneading levels for 1.5 - 6 kg dough / 1 - 4 kg flour Water capacity 0.5 - 2 L Arm rotations 36 - 64 rpm Net weight machine 49 kg Motor power 750 W Connection: 230V 50Hz New machine 24 months warranty More TOP bakery machines in stock!