t slot used for sale

Rubber protection mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt -Manufacturer: Siegling Transilon - conveyor belt -Width: 720 mm -Length: 5773 mm -Number: 2 pieces -Price: complete -Transport dimensions: 720/290/H200 mm -Total weight: 21 kg

Tamper-Evident labeller for folding boxes. Machine is fitted with 3 Pagomat label dispensers, Code reader LAETUS etc. Output: up to 200 units/min. PLC: SIEMENS Simatic S7-300.

1 used pallet rack; Make: SSi-Schäfer Type: PR600 Year of construction: 2001 Longitudinal truss shelf field load: 8,400 kg lower clear compartment height: 2,093 mm -40 pieces of stand frame frame height: approx. 11,500 mm Frame depth: 800 mm; Profile: P95, galvanized -298 traverses; Traverse length: 4,000 mm INP profile steel beam: 100 x 50 mm; material colour: blue -60 pieces of trusses; Traverse length: 2,700 mm; INP profile steel beam: 100 x 50 mm; Material color: blue -2 pieces of pallets with depth bars; for shelf depth 800 mm;material colour: blue; -10 pieces of steel beams; Length: approx. 4,030 mm U-profile: 100 x 50 mm, material colour: blue -50 pieces of steel beams; Length: approx. 2,780 mm; U-profile: 100 x 50 mm;Material colour: blue Construction can be individually designed. The dismantled system is in our warehouse in Eitorf Transport and assembly ca ...

Following separator available for sale. Make: ALFA LAVAL Type: WHPX 505 TGD 24-60 Serial Number: 2993137 RPM: 1700-1800 r/m ,142-150 Product No.: 881002 Machine Topper No.: 537245-80 Bowl No.: 537170-80 Machine Bottom part: 540224-04 MOTOR Make: Made in Italy No.: 17019 19Z Volt: 440 HZ: 60 KW: 4.2 RPM: 1720

CATERPILLAR/ MWM type TCG 2020 V12 -> 0.999 MWe. The engine and generator are fully operational. Engine mileage - approximately 33000h. Year of manufacture 2015; fuel: natural gas / biogas Generator: Manufacturer MARELLI MOTORI SP. A type MJB 500 MB4; CODE MJB5042K33380; No. MC 16586; year of manufacture 2015. Control cabinet complete with panel. Engine taken out of service with the customer in August 2022 due to the purchase of a new one. The engine has no visible signs of leakage. If interested, I can send a real -film on WhatsAp.

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet -Mounting plate for: control cabinet -Dimensions: 1895/500/22 mm -Weight: 28 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Motor: Thrige-Titan type MTL 11-7 D -Motor: 24 V 3 kW 3000 rpm -Tank: 200/290/H230 mm -Dimensions: 210/320/H510 mm -Weight: 42 kg

We offer formwork Peri Trio 270 x 240, 18 pieces with 55% discount on a new value of 2.994,00 €/pcs. = Net price 1.347,30 €/pcs. Frame top used condition, cleaned, primed and painted with zinc phosphate coating. The formwork is completely overhauled, newly occupied, checked and sorted. Available individually, subject to sale! Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim Register court Ulm: HRA722943

Available for sale 1365 kW MWM TBG 620 V16 inside container. Equipment in good working conditions.

Available for sale 1 x 3500 kW MWM TBG 632 V16. Equipment in good working conditions.

Available for sale 1365 kW MWM TBG 620 V16 K. Equipment in good working conditions.

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 5000 kg -Chain length: 2250 mm -Dimensions: 900/500/H160 mm -Weight: 35 kg

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 5000 kg -Chain length: 3700 mm -Price: per piece -Number: 2 pieces -Dimensions: 980/600/H160 mm -Weight: 47 kg

Available for sale 1400 kW MWM TBG 620 V16 K. Equipment in good working conditions.

Stick electrodes 4.0 x 450 -Type: Phoenix SH Ni 2 K 90 -Price: per package -Number: 2 packages available -Weight per package: 6.3 kg

Turbo Dryfill depositor Serial: 39907 Stainless depositor, variable speed agitator in 50Kg hopper, adjustable height, with mounted roller conveyor, mobile, 1Ph

Motor protection relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors -A1-A2 220 V 50-60 Hz -250 VAC 4 A Price: per piece -Quantity: 25x available -Weight: 0.4 kg

TUBULAR radiator in alluminium that can be used at 30bar. Complete line. We have a full production line for radiators to sell. We want to sell all the line, not a single machine. Inattached also the final product, radiators in alluminium in 3 difefrent measures and different hight.

Power supply unit, converter, power supply, switching power supply -Phoenix Contact: TRIO-PS/1AC/24DC/10 -Input: 100-240 V -Output: 24 V -Price: per piece -Number: 2 pieces -Dimensions: 160/60/H130 mm -Weight: 1.4 kg

Available in stock 2 x NEVER USED Industrial Ventilation Fans TSBD-3. The photos are only examples of the same model. The ventilation fans on sale have never been used and are still inside the original packaging. Specifications: Model: TSBD-3 Dimensions: 1100 x 1100 x 400 mm Flow: 32 500 m3/h Power: 0.75 kW Voltage: 380 V Frequency: 50 Hz Blade Diameter: 1000 mm Speed: 427 r/min Single phase

Control amplifier, servo motor control -Manufacturer: Indramat -Type: TRM3-W23-E0/523 -Module: TSS8/532 -Number: 1x controls available -Price: per piece -Dimensions: 305/145/H310 mm -Weight: 7.1 kg/piece

Available in stock 1 x Used Boll & Kirch Duplex Filter and 1 x Used Boll & Kirch Lub. Oil Automatic Filter. The equipment was used in a HFO power plant. The equipment is used but is in good working conditions. Max all working pressure: 10 bar Max all working temperature: 80ºC

Plasma Cutter VCS 2000, HiPerformance Plasma HPR 260 XD and suction Filtercube 4H 7500 m³/h volume flow. To be visited in operation.

Hose reel, hose unwinder, tank hose reel, wall reel, oil pump, hose reel, automatic hose reel, oil hose reel -Spring-loaded drum -Hose length: 5 m -Dimensions: 500/400/200 mm -Weight: 16 kg

manually operated, air-cooled Rated power at 50%ED: 2.5kVA Short circuit current: 8.2kA Electrode force max.: 120daN Projection: 125mm --- equipped with: - 3m connection cable - Standard electrode arms 125mm - Thyristor performance, time, and Pulse controller built-in. --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Pile feeder F535 – Vacustar separating head 4 buckles 1 knife Batch counter A56 delivery

loading : 75 to 80 % double jacket suitable for cooling or heating up to 75°C with mixing arm all stainless steel tiltable drum outside dimensions (l x w x h) : ± 2.400 x 1.100 x 2.000 mm 3kW PLC control yoc 2017

2 knife speeds 2 mixing speeds 2 separate bowl speeds emptier With loader Auto command 3000 K yoc 2017 only 1.603 running hours 125 kW total connected power

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: Leuco, saw blade type topline Ø 390 mm -Inner diameter: 35 mm -Number of teeth: 96 -Quantity: 2x saw blades included -Price: per piece -Dimensions: Ø 390 x 3 mm -Weight: 2.2 kg/piece

3,85 LF WIDE SPAN RACKS 60CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 60 cm L : approx. 3,85 m Shelf offer consisting of: 03 x frame approx. 200 x 60 cm, disassembled. 16 x traverse approx. 185 cm. 08 x Contact back approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 425,00 € net plus legally valid VAT You will receive an invoice with VAT.

57 LF WIDE SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 57 running metres Shelf offer consisting of: 031 x frame approx. 200 x 80 cm , disassembled. 240 x traverse approx. 185 cm. 120 x support shelf approx. 184.5 x 79.5 cm. 240 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 7267,00 € net plus legally valid VAT You will receive an invoice  ...

13,35 LF WIDE SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 13,35 m Shelf offer consisting of: 08 x frame approx. 200 x 80 cm, disassembled. 56 x traverse approx. 185 cm. 28 x support shelf approx. 184.5 x 79.5 cm. 56 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1724,00 € net plus legally valid VAT You will receive an invoice with VAT.

9,55 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 9,55 m Shelf offer consisting of: 06 x frame approx. 200 x 80 cm, disassembled. 40 x traverse approx. 185 cm. 20 x support shelf approx. 184.5 x 79.5 cm. 40 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1242,00 € net plus legally valid VAT You will receive an invoice with VAT.

7,65 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 7,65 m Shelf offer consisting of: 05 x frame approx. 200 x 80 cm, disassembled. 32 x traverse approx. 185 cm. 16 x support shelf approx. 184.5 x 79.5 cm. 32 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1001,00 € net plus legally valid VAT You will receive an invoice with VAT.

5,75 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 5,75 m Shelf offer consisting of: 04 x frame approx. 200 x 80 cm , disassembled. 24 x traverse approx. 185 cm. 12 x support shelf approx. 184.5 x 79.5 cm. 24 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 709,00 € net plus legally valid VAT You will receive an invoice with VAT.

3,85 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 3,85 m Shelf offer consisting of: 03 x frame approx. 200 x 80 cm, disassembled. 16 x traverse approx. 185 cm. 08 x support shelf approx. 184.5 x 79.5 cm. 16 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 519,00 € net plus legally valid VAT You will receive an invoice with VAT.

1,95 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 1.95 running metres Shelf offer consisting of: 02 x frame approx. 200 x 80 cm, disassembled. 08 x Traverse approx. 185 cm. 04 x Contact back approx. 184.5 x 79.5 cm. 08 x beam / load distributor Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 278,00 € net plus legally valid VAT You will receive an invoice  ...

Bottle filler, make ICS, type: TPS 24/6K, with 24 filling valves and 6-head crown capper, adjust to 0,5 lt. NRW- and Euro-bottles, built 2002, was in operation until the end of 07/2022

5-Axis Horizontal Machining Centre MCM Tank 1300 5-AXIS New in 2017 Siemens 840D solution line Twin pallets 630 x 800 mm Work weight max. 1500 kg NC rotary table - 4th axis B-Axis 360° / 0.001° NC-Tilting head 5th axis A-Axis +80°/-95° / 0.001° X 1300 mm Y 1400 mm Z 1400 mm Feeds and rapids to 50000 mm/min. Spindle drive 40/52 KW Spindle speeds to 10000 rpm Tool taper ISO 50 199 tool ATC Linear scales for higher accuracies Renishaw sample Chip conveyor CTS 65 bar Beautiful machine – excellent condition Operating hours 11544 - 05/2020) Spindle Working hours 6784 (05/2021) Inspect under power Proposal Number MH-6155

Machine type electrode inverter welding rectifier Brand Böhler Type Terra 220 RC Supply voltage 3 x 400 volts, ± 15 % Setting range 3 – 220 amperes Duty cycle 30 % ED at 220 amps 60% ED at 170 amps 100% ED at 150 amps Current adjustment infinitely variable weldable material thickness 6 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 410 x 150 x 330 mm Weight 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery welding system with the following accessories 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 20 rod electrodes in 2.0 x 250 mm 20 rod electrodes in 2.5 x 350 mm 1 piece instruction manual Warranty 24 months fro ...

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck -Mouth size: Ø 250 mm -Recess: Ø 230 mm -Bolt circle: Ø 200 mm -Quantity: 2 available -Price: per piece -Weight: 35 kg

Stick electrodes 4.0 x 350 -Type: Phoenix 330.1 SH Purple R -Weight per package: 4.9 kg

Stick electrodes 4.0 x 450 -Type: Phoenix K 90 S -Price: per package -Number: 1 packages available -Weight per package: 6.2 kg

New Tesla experimental set from Wassermatix

CTP UNIT HB TOPSETTER (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Ser. No.: 013910086 Counter: 115.778 plates Format (cm): 52 & 74 with software license for both formats Equipment / Additional information: With integrated plate punch With washing station AZURA C85 (M.No.: 92700-0307) Plate stacker, advand PST 48 ( M.No.: M211348121L) Software, complete RIP (6 years old) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

450mm W x 200mm H Right to Left Conveyor Width 400mm Conveyor Height 840mm Stop on detect Overall length - 1950mm

Ball bearing linear guide with 3 carriages, SHS55LC3DDHHC0-1140LP, THK, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws, sychron motors and linear guides in various designs. Please have a look at our website of IPV GmbH. Linear guide with ball chain type SHS55LC3DDHHC0-1140LP from THK consisting of: -1 pc. Guide rail 55mm x 1140mm long - 3 pcs. Carriage SHS55LC Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Nominal force 400 kN Stroke rate - 70/140 / min Motor 3/4 kW Exploitable stroke - at constant. Clutch brake temperature 50/45/min Capacity - material thickness 4-6.4 m - with single strokes, 2-3.2 mm - with continuous stroke Table 660 x 530 mm, table top 650 x 515 x 75 mm Stroke adjustment - 10-125 mm, Dimensions 1250 x 1600 x 2370 mm - High , Btto 4500 kg Reconditioned machine - warranty 9 months from delivery date

offer 22489 Specifications: - Cutting range at 90° approx. 320 m - flat 320 x 320 mm - Material replenishment machine - Band saw blade dimensions 5095 x 34 x 1.1 mm - Cutting speed 10 to 120 m/min - hydr. Lifting – lowering the saw frame - upper stroke limitation of the saw frame - Cutting pressure infinitely adjustable - hydr. Material clamping pole - Chip conveyor screw - Coolant device - Discharge roller conveyor 2500 mm - Drive 400 V / 4.0 kW - Space requirement approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg

TecHouse/Multigraf shed delivery tape 482.112; good condition; cleaned and tested; Length 1100mm; Width 340mm; sensor for automatic control; Speed adjustable; height adjustable. TecHouse/Multigraf stream delivery 482.112; good condition; cleaned and checked; Lenght 1100mm; width 340mm; sheet detection sensor for stop and go mode; adjustable in speed; adjustable in hight.