t slot used for sale

82 MW Rolls Royce Trent 60 - NATURAL GAS TURBINE COMBINED CYCLE POWER PLANT -Rolls Royce USA, manufactured Trent 60 (SGT-A65) Gas Turbine Generator Set; Manufactured in 2016, delivered in August 2017 65.9 MW(e) ISO 43.8% Gross efficiency / 8,228 kJ/kWh Heat Rate DLE Dry Low Emissions with ≤ 25 ppmvd at 15% O2 on fuel gas Cold start to full power in under 10minutes 50Hz, but easily convertible to 60Hz Engine still preserved in original shipping container An aero derivative gas turbine -Siemens Steam Turbine Generator SST-300 C2S/C160; Manufactured in 2016 Output 15.75MW ISO Speed 7059 RPM Admission Steam Temperature 400 Degrees C Admission Steam Pressure 30 bara Exhaust Pressure 0.07 bara Rotation- Right

For sale is a completely overhauled turbocharger from the manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul, so it is in mint condition. The internal reference number or SAP no. is 1114381o and the serial number is HT433332. The spare part number is 363927. Please check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. However, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The TPS57E01 model has a rated speed of 40200 rpm and is cooled by oil. The year of manufacture and the nominal power in kW are not available (nv). This turbocharger has an old design with a V-clamp on the exhaust side. As a special offer, we offer a special ...

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1114382o and the serial number is HT838533. The spare part number is 300746. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The Model TPS57E01 was manufactured in 2011, has a rated speed of 40200 rpm and is cooled by oil. Please do not hesitate to contact us with any questions or for more information. We look forward ...

Alimak TPL 2000D Transport Platform  Brand ALIMAK HEK Type TPL 2000D Year of construction 2014 Serial number 50229 Weight 1850kg Overall dimension L 1500mm Overall dimension W 3200mm Power connections: 400 V, 50 Hz, 3 Ph.; Nominal power: TP 2x3.8 kW, MH 2x7.6 kW; Nominal current: TP 15.4 A, MH 30.4 A; Connected load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg) 2000 Number of people max. (including payload) TP Mode 7 Number of people - MH mode 0 Lifting speed (m/min) Operating mode TP 12 Lifting speed (m/min) MH Mode 24 Max. lifting height (bound) 100 m Max. distance (m) 7.5 Max. overhang (m) 4.5 Max. height of 1st guying (m) 6 Mast type triangular 350, tubular steel  More items - new and used - can be found in our shop! International shipping costs on request!

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1108217o and the serial number is HT451218. The spare part number is 325766. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The Model TPS57E01 was manufactured in 2002, has a rated speed of 40200 rpm and is cooled by oil. Please do not hesitate to contact us with any questions or for more information. We look forward  ...

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1108217o and the serial number is HT453586. The spare part number is 325766. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The TPS57E01 model has a rated speed of 40200 rpm and is cooled by oil. The year of manufacture and the nominal power in kW are not available (nv). Please do not hesitate to contact us with any q ...

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1108218o and the serial number is HT453186. The spare part number is 325767. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The Model TPS57E01 was manufactured in 2002, has a rated speed of 40200 rpm and is cooled by oil. The nominal power in kW is not available (nv). Please do not hesitate to contact us with any ques ...

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1108218o and the serial number is HT450595. The spare part number is 325767. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The TPS57E01 model has a rated speed of 40200 rpm and is cooled by oil. The nominal power in kW is not available (nv). Please do not hesitate to contact us with any questions or for more informat ...

20x 800 ltr. VA2 transport tank, used, round standing, stackable, dome top 400 mm, residual outlet with disc valve NW 80, operating pressure 2 bar, test overpressure 3.4 bar, overpressure valve in the lid, pressure resistant for e.g. overlay with CO2 or CO2 impregnation, weight/h: 130 kg, cleaned inside, pressure-tested, very stable design, diameter: 1 m, H: 1.60 m, Price/pc: 940,- â?¬ plus VAT from dolgesheim warehouse

Alimak TPL 2000D Transport Platform  Brand ALIMAK HEK Type TPL 2000D Year of construction 2013 Serial Number 50138 Weight 1900kg Overall dimension L 1500mm Overall dimension W 3200mm Power connections: 400 V, 50 Hz, 3 Ph.; Nominal power: TP 2x3.8 kW, MH 2x7.6 kW; Nominal current: TP 15.4 A, MH 30.4 A; Connected load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg) 2000 Number of people max. (including payload) TP Mode 7 Number of people - MH mode 0 Lifting speed (m/min) Operating mode TP 12 Lifting speed (m/min) MH Mode 24 Max. lifting height (bound) 100 m Max. distance (m) 7.5 Max. overhang (m) 4.5 Max. height of 1st guying (m) 6 Mast type triangular 350, tubular steel  You can find more transport platforms - new and used - in our shop! International shipping costs on request!

Alimak TPL 2000D Transport Platform  Brand ALIMAK HEK Type TPL 2000D Year of construction 2015 Serial number 50386 Weight 1850kg Overall dimension L 1500mm Overall dimension W 3200mm Power connections: 400 V, 50 Hz, 3 Ph.; Nominal power: TP 2x3.8 kW, MH 2x7.6 kW; Nominal current: TP 15.4 A, MH 30.4 A; Connected load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg) 2000 Number of people max. (including payload) TP Mode 7 Number of people - MH mode 0 Lifting speed (m/min) Operating mode TP 12 Lifting speed (m/min) MH Mode 24 Max. lifting height (bound) 100 m Max. distance (m) 7.5 Max. overhang (m) 4.5 Max. height of 1st guying (m) 6 Mast type triangular 350, tubular steel  You can find more transport platforms - new and used - in our shop! International shipping costs on request!

Material: PVC / Details: DC motor 70 kW, degassing, counter-runner, vacuum pump, screw diameter 88-151 mm (conical) Throughput: approx. 300 - 400 KG/hr.

Material: PE, PP, PS, ABS, // Details: DC motor: 93 kW, degassing, screw diameter 115 mm, L/D 26

PVC - heating / cooling mixing combination Hot mixer 750 ltr. / Cooling mixer 2,500 l. Engine power: 212 + 45 kW

Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm ·from front to rear 1000 ·from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm ·length 3470 ·width 3140 ·height 5940 Press weight without hydropneumatic pillow kg 31 400

Machine Type: TIG Welding Machine Water-cooled DC and AC system Make Dalex Type TGKW 55 Connection voltage 2 x 400 volts Adjustment range 3 – 225 amps Duty cycle 60% ED at 225 amps 100% ED at 175 amps Current setting 5 switching levels max. weldable material thickness 6 mm Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse 32 Amps Dimensions L x W x H 1,300 x 600 x 850 mm, incl. bottle cage Weight approx. 200 kg Age approx. 30 years Condition workshop-tested incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG welding torch WHW 20, 4 mtr. 1 piece ground cable 1 piece pressure reducer 1 pair of TIG gloves 1 piece spare parts box complete Equipped Warranty: 6 months from the date of delivery Original price €3,400.00 + VAT  ...

Mantle Packaging Stainless manual tray sealer, twin tray operation, temperature and timer controls, tray dimensions 270mm x 280mm, 1Ph

Storage Tanks / Pressure Tanks in V2A Max. working pressure: 0,99 bar Test pressure: 1,5 bar with Cooling Jacket and Conical Bottom NEW TOTAL LIST Capacity: 200-1000 litres Cat-no. / Volume: 17-00176-1 200 17-00176-2 300 17-00176-3 400 17-00176-4 500 17-00176-5 625 17-00176-6 750 17-00176-7 1000 Material: V2A - AISI 304, 1.4301 Surface: outside marbled 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with 2 x thread connection DN 50 with CIP washing head (on extra charge) Tank cylinder: with cooling jacket with sample valve with spiral (on extra charge) with immersion socket for temperature indicator analog (on extra charge) Lower bottom: with clear outlet with butterfly valve DN 50 (on extra charge) with rest outlet with butterfly valve DN  ...

Storage tanks / transport tanks with cooling jacket made of V2A NEW TOTAL LIST Content: 700 litres, 900 litres, 1100 litres Cat-No.: Content Liter: 20-00009L-1 700 20-00009-2 900 20-00009-3 1100 Material: V2A - AISI 304, 1.4301 Surface: outside marbled III C Tank top: with 4 x crane eyelets with threaded welding nozzle DN 40 with thread DN 150 Tank cylinder: with manhole front 530 x 420 mm with cooling jacket Underbody: with residual drain DN 50 (disc valve DN 50 at extra charge) with 4 x feet

Solar Gas turbine Taurus 65 SOLONOX The turbine and gear box is from 2022 and it only has 2000 running hours. The package is from year 2011. The condition is excellent and is ready to start working, in addition it included Solonox mode and fire extinction module. All the maintenance has been done by Turbomach official service. The equipment is already dismounted on our warehouse and ready to be load. It is available all the systems except the exhaust system that is optional. It is possible to have a visit and a inspection of the turbine. Also is available a boroscope of the turbine. YOM:2022 Power: 6300kWe Fuel: Natural Gas Working Hours: 2300 h Voltage: 6300V

Machine weight: 39,000 kg Faceplate diameter 2000 mm number of supports: 2 pcs. Dimensions : Height 6280 mm width 6600 mm length 4800 mm Extras: Right support with turret head, left and side - sliders. Digital indication of NS 114. Technical condition at the time of sale: Defective rotary amplifier main drive-replacement is required. Require replacement of cables and wires external piping:-machine control cabinets. Repair and adjustment of electrical parts. Not operated since 1994 The maximum dimensions of a workpiece Height 1300 mm Diameter of 2000 mm Weight 15 000 kg

Kreuter Chocolate temperer Model: TMK100 Serial: 7906/91 Refurbished by Wolf in 2013, 100Kg chocolate temperer, adjustable temp controls, agitation with scrape surface, with all manuals, 3Ph

36,000 m3 thermal oil supply system/exhaust air purification plant (special plant construction) WK, Year of construction: 2012, with heat recovery and cooling supply, The system is currently designed for two printing systems. Depending on the Machine equipment for 3 - 4 printing systems. The system consists of the following components: - 1 roof-mounted thermal post-combustion system / exhaust air purification WK Thermal Engineering Plant, boiler and apparatus construction WKTNV, year of construction: 2012, exhaust air volume at the inlet 36,000 m³/h, maximum permissible combustion chamber temperature max. 730 °C, burner type WK/H1 gas cone, Burner power 6,600 kW, fan power 200 kW, maximum permissible inlet temperature 210 °C, Maximum permissible solvent throughput 500 kg/h, natural gas heating medium, calorific value of the heating medium 32693 kJ/m³, max. heating fuel con ...

3 Transformer Power 1250 kva

Insulating container 600400 . Batteries available

Output card TPMC PLC for Tetra Pak TBA 8 aseptic filling machine Output module TP OM16

TEMPERATURE CONTROL for 90V TBA/8 aseptic filling machine 90410-0051

Decorative holding card TMCC

SKU: 90025-0055 Power supply TPMC PLC for aseptic filling machine TBA 8

Item number 90025-0017 Input card TPMC PLC for TBA 8 aseptic filling machine

Item number: 90458-0601 Photocell for TBA 21 jaw system aseptic filling machine

article nr.: 67379-0202 or 67379-202 Transformer, Trafo, Transformer TBA 21 Tetra Pak aseptic filling machine

SKU: 90410-0051 Temperature controller KS 40 for e.g. TBA 8 Tetra Pak aseptic filling machine

Item number 90045-0337 Engine control card, engine control

Item number 67379-0101 Transformer cross seam welding for Tetra Pak TBA 8 aseptic filling machine

Mathis THN 10988 Laboratory Thermosal Plant Use This foulard-dryer combination has proven itself excellently in practice. It is used in this way for a wide variety of hot air treatment processes such as drying, fixing, condensing, thermo-isolating, etc This system is used wherever a certain sample size is already required, for example to produce sample collections or the like. Dryer THA If the foulard and dryer are to be used separately in addition to continuous operation, the THA type dryer should be chosen. Attached to this device are a unwinding unit at the dryer entrance and a pull-out unit at its exit. This element determines the speed of goods in individual operations. This offers the advantage of using the foulard and dryer independently and at the same time. For drying, fixing, condensing, etc., the goods are then put on the dryer. If all the previously listed ap ...

51 MW - CCGT comprising 3 x 12 MW Solar Gas Turbine generator and 1 x 15 MW steam turbine generator Model : TITAN 130 Capacity : 12 MW Voltage ; 11 KV / 50 Hz Qty : 3 sets Titan 130 + 1 set STG Year : 2012 Running hr : 6000 hrs since new

various accessories / spare parts for Tornos AS 14

For sale is a used high-temperature analyzer, from the manufacturer Elementar Analysensysteme GmbH. The liquiTOC trace is functional and ready for use. Year of Make: 2007 Mains voltage: 120-230 V AC +-10%, 50/60 Hz Connected load: approx. 1.9 kVA Operating Modes: TC, TIC, TOC, NPOC, POC Calibration: linear Sample volume: 0.05-4ml, depending on the concentration range Analysis duration: 6-22 min, depending on operating mode Sample storage type: PS 61E Weight: approx. 50kg The instruction manual is provided. Price excludes VAT, freely loaded from the Hesse-Germany location. Shipping to Arrangement and assumption of costs as well as delivery possible throughout Germany. Changes / errors in the technical data as well as prior sale reserved.

Technical data: - Bending capacity - steel pipe of 20 - 60 x 4 mm - - stainless steel pipe of 20 - 50 x 3 mm - max. resistance moment 6.2 cm - max bending angle 180° - max radius 125 mm - Bending speed 8 sec - Drive 400 V / 3 kW - Space requirement approx. L 2400 x H 1600 x D 1000 mm - Weight approx. 1400 kg - with: - Bending angle control via potentiometer with digital display - 6-fold bending angle preselection - Indoor + external pipe deburrer - Bending tools Rx2.5D x 38 ; • 50 , 65 ;

CNC fine lathe Make: PetrolGer Type: TNL Control: Siemens 810T Built: 1991 Equipment and accessories: - Swivel loader system - Small conveyor belt - Charging-unloading gripper - Chip conveyors - Foot lever for clamping and relaxing the collet

Key data: 85 mm, 255 mm, 6300 1/min

CNC lathe Emco E25 Powermill TCM Commissioning 03/2019 At call! Siemens 828D Shopturn Main spindle spindle passage 25mm PF - 6,300 1/min Turret 12-speed VDI16 driven tools 6,000 1/min PC Keyboard Machine set-up and fastening material Parts collection device Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun 8-bar high-pressure coolant device Power Chuck 95/3 Röhm Pliers chuck KZF 20 for 148E Tool holder pact stationary/driven 9 pieces Radial Milling Holder VDI16 2 WStück Axial Milling Holder VDI16 2 WStück OPC UA / Siemens interface The options list is complete! No interest in dealer enquiries! No separate dealer price! WB mechanics GmbH is a precision mechanics workshop that markets its used machines on its own. We are not a machine dealer, but the machine user! The machine is in use in our company until it is sold a ...

Fliss bohrer and thread rolling NC machine. Machine was rebuilded in 2019, complete Hardwere, and pneumatic components, and part from electric. Machine can be used for serial tube production, can be aded Robot for manipulating. Machine will be able to connect with a handling robot for fast delivery and high productiion.

Double-tubing stainless steel tanks very stable quality. Suitable for cooling with a net content of 2500 l

Two stainless steel tanks with drain. About 1500 l individual was sold

Machine Type: TIG Inverter Welding Machine Gas-cooled DC system Make EP-Systems Type TopTIG 160 HF Connection voltage 1 x 230 Volt Adjustment range 1 – 160 amps Duty cycle 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter through built-in fan Cooling burner gas-cooled Portable assembly system design Fuse 16 Ampere Dimensions L x W x H 410 x 240 x 320 mm Weight 10 kg Age 6 years Condition workshop-tested new, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG torch 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box complete Equipped 1 Piece Instruction Manual Warranty: 6 months from the date of delivery Original price  ...

Rotary tablet press SPT- TP500D with double-sided press; Brvyulnw 2 layered production; Touch screen, PLC Control Panel; HMI (Human Macshine Interface); SPT-TP 500D Number of stations (Max.) D=41 B=49 BB=59 1 Max tablet ejection (two-sided) T/h 270 000 360 000 420 000 Max tablet ejection 2 layer T/h 90 000 115 000 140 000 2 Max.Tab.Diameter Round mm 13 16 25 Form 14 19 25 3 Max tablet thickness mm 8.5 4 Max main pressing force t 10 6 Dimensions mm 1150 x 1550 x 1950

horizontal pressure tank, steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater or above ground with brackets, e.g. for molasses, AHL, ASL, water, corn mixture Volume: 32,000 L Dimensions: Ø 2.50 × 7.0 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections and suction line. In addition, the tank is treated with a new external coating (anti-corrosion). Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485 E-mail: kontaktscholten-tanks.de

horizontal pressure tank, steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater or above ground with brackets, e.g. for molasses, AHL, ASL, water, corn mixture Volume: 45,000 L Dimensions: Ø 2.80 × 7.70 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections and suction line. In addition, the tank is treated with a new external coating (anti-corrosion). Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485 E-Mail: kontaktscholten-tanks

The small rotary tablet press SPT-TPL 200 (small scale production); Touch screen, PLC control platform; HMI system; Bczkcapdbh The machines comply with the requirements of the GMP guidelines and are CE certified; Number of stations (Max.) D=13 B=16 BB=19 1 Max tablet ejection/hour T/h 46 000 57 000 68 000 2 Max.Tab.Diameter Round mm 25 16 13 Shape mm 25 19 14 3 Max tablet thickness mm 8.5 4 Max main pressing force t 5 5 Max pre-press force t 1 6 Dimensions mm 600 x 1106 x 1705