134,858 used machines on RESALE, but how to find them? Machine Search
Description Item #8868 – DOUBLE TWIST WRAPPER Wrapping machine for deposited or enrobed chocolate products with or without center-filling in double twist wrap Manufactured by NAGEMA Model EU7 380Volts, 50Hz including a NAGEMA MG2 Aligner/Feeder Nominal capacity up to 380 pieces per minute Suitable for 20 to 60mms long x 13 to 27mms wide x 8 to 20mms high
Description Item # 8825 – (2) x TEABAG MACHINES Manufactured by TECNOMECCANICA Model T2 Prima Single chamber teabag with heat-seal envelope with cartonner without staples Speed: up to 160 tea bags per minute Cardboard dimension: 80 x 80 x H92 mm (max. 10-13 tea bags inside). Envelope dimension: 75 x H90 mm (heat-sealing materials) Tea bags dimension: 60 x H75 mm (heat-sealing materials). Tea bag tag paper dimension: 24 x H28 (paper without steel). Power supply: 400V, 50Hz, 9,5 KW. Special doser unit for light products can be packed tea up to 4g (black tea).
Description Item #8956 – DOUBLE TWIST WRAPPER FOR CHOCOLATES Manufactured by OTTO HANSEL Model X8002 Currently set up to wrap chocolate balls approx. 28mms diameter With Vibratory Product Feeder 380Volts, 3Phase, 50Hz
Description Item # 8970 - (2) CANDY SINGLE TWIST WRAPPERS Manufactured by ROSE-THEEGARTEN Model A3-SA Each with Vibratory Product Bowl Feeders Each with PLC for reading printed product film Set up for hard candy piece size approx. 26mms long x 22mms wide
Description Item # 8971 - (2) CANDY DOUBLE TWIST WRAPPERS Manufactured by CARLE & MONTANARI One is Model CM.H500 Set up for approx. piece size 28mms long x 22mms wide One is Model CM.H70 : Set up for approx. piece size 28mms long x 22mms wide Each around 350 pieces per minute
Description Item # 8974 – GUM/ CANDY EXTRUDER and COOLING TUNNEL Last used for gum (to be made into chiclets) Including : CARUGIL STR-300D Extruder - Twin Head Extruder 8kW, 380Volts With Inclined Belt feeding into an EXECUTIVE Cooling Tunnel Type 1240301 400Volts, 50Hz With SIEMENS PLC Controls Including 2 x Freon R407C Compressors
Description Item # 8977 – GUM COOLING TUNNEL Manufactured by TOGUM Model TOK-220 3 x 380Volts, 50hz, 20kW
Description Item # 8979 - GUM/ CANDY EXTRUDER & COOLING TUNNEL Manufactured by WLS Type KML Single Rope Feeding into a TOGUM Cooling Tunnel Model TOK 350-7-6 380Volts, 50Hz This was working with item #8680 candy cut and wrap
Description COOLING TUNNEL With SEWTEC AUTOMATION Wafer Bar Feeding Station, Conveyor through to a 1000mms wide SOLLICH Cooling Tunnel, about 30metres long. (Previously Used for wafer bars after caramel and chocolate coating, enrobers not included)
Description Item # 9179 – CHOCOLATE TANK Manufactured by LOW & DUFF MACINTYRE Model 7T-CST Year 1993 40PSI Jacket Pressure 7000Kgs capacity Mild Steel Tank, Jacketted With Immersion Heater With Motor & Stirrer About 2300mms high x 2100mms diameter
Description Item # 9180 – CHOCOLATE TANK Manufactured by STEPHENS Reference Number PP370 12-Tonne Capacity, 2 x 6-Tonne Capacity sections Mild Steel, Jacketted With Motor & Stirrer Approx.2400mms diameter Approx.2600mms high + 500mms high feet
Description Item # 9212 – (2) DOUBLE TWIST WRAPPER FOR CHOCOLATES Manufactured by NAGEMA Model EU7 Each including a DINATEC Aligner/Feeder, Each also with a BENNE Transfer Conveyor, Wrappers were each running at around 200 pieces per minute Doing 10-11grammes products, measuring 31 x 17 x 12, 28 x 17 x 13, 30 x 15 x 11 & 29 x 13 x 11 EU7 Product dimensions - Length: 20 – 60mm - Width: 13 – 27mm capacity 180 - 380 per minute
Description Item # 9213 – (2) DOUBLE TWIST WRAPPER FOR CONFECTIONERY (Fruits De Pates) Manufactured by NAGEMA Model EU7 Each with a BERNAY AUTOMATION Vibratory Feed Hopper, type Bol, Running on 11.85grammes pieces One shared Discharge Conveyor EU7 Product dimensions - Length: 20 – 60mm - Width: 13 – 27mm capacity 180 - 380 per minute
Description 9214 - Likwifier jacketed with steam and holding tank Manufactured by WATSON METAL MASTERS INC (USA) Year 2012 A Likwifier is a type of mixer specifically designed to dissolve solids or semi-solids into a liquid, often used in the food industry for tasks like dissolving gums, emulsifiers, and other ingredients in ice cream mixes, sauces, and other food products
Description Item # 9215 - (2) DOUBLE TWIST WRAPPERS Manufactured by OTTO HANSEL set up to wrap chocolate pieces measuring 24mms x 11,5mms 220Volts, 50Hz, 3Phase Each Wrapper also including a Product Aligner/Feeder Model X8003(HBX) Model X8002(HBX)
Description Item # 9223 - CHOCOLATE TANK Stainless Steel, Double Jacketted 1000litres capacity With Heater & Pump, on Legs With Motor & Drive With Stirrers
Description Item # 9247 - STARCH TRAYS Previously being used on a NID M301S Mogul Plant Wooden Trays Likely to be manufactured by TREIBER Internal size 780mms long x 373mms wide x 23mms high External size 820mms long x 400mms wide x 33mms high Quantity of about 65 trolleys, each with 80 Trays (total about 5200 trays) Starch also in the trays
Description Item # 9261 - TEABAG MACHINE Manufactured by FUSO Including : FUSO FW-100SA(N2) Load Cell Weigher Year 2008 Up to 100 weighs per minute Maximum 10grammes (bucket capacity 50cc) FUSO FPG-SH Teabagging Machine with gas filed Overwrap Packaging Machine Year 2008 Set up for rectangular teabags with string & tag, 95 x 55mms Can also do Pyramid Teabags 3-side Ultrasonic Sealing & cutting 120-180mms filter width Bag Size 50 to 80mms each edge for pyramid bags 40 to 80mms wide x 50 to 80mms long for rectangular bags Maximum 60 bags per minute
Description Item # 9262 - TEABAG MACHINE Manufactured by SANKO (Japan) Model US12 Year 2008 200Volts, 3Phase, 50/60Hz US12 is a packaging machine for tea bags (green tea, black tea, coffee and so on) only. Since a ultrasonic sealing system is used, packaging film made of polyester or nylon is possible. To change from 3-side seal packaging to pyramid packaging and versa vice are easy. Since a microcomputer is built in, setting the pitch is made on a digital system and changing the pitch is easy. The data for various kinds of products can be store in memory. Bag length from 45 to 100mms, bag width from 40 to 70mms Up to 80 bags per minute Up to 60cc bag volume
Description Item # 9263 - TOPPING SPRINKLING DEVICE SYSTEM for sprinkling chocolate ribbon and other decoration onto belt or product Can also be used for fine sprinkles like poppy seed, sugar, coconut, sesame seed, etc. Manufactured by HASBORG (Poland) Year 2022 1100mms working width Includes : Sprinkler basket with spreader, Pressure Roller, Intermediate Conveyor, Main Frame with lifting system, Supplementary Basket, Rising Conveyor, Electrical Box, Upper Cross Conveyor
Description Item # 9296 - TUBE FILLER Manufactured by NORDEN Model 700 aluminium tubes previously used for paint, last in production around July 2025 Year 1997 with Date Embosser with parts for 15ml 40ml, 60ml, 225ml. Circumferences: 19mm, 25mm, 30mm, 45mm 380volt, 50hz
Description Item # 9332 - (2) DOUBLE TWIST WRAPPERS FOR HARD CANDY Manufactured by NAGEMA One is a Model EU4 Year 1980 One is a Model EU8 Year 1982 Both machines set up for a 2gramme hard candy piece Measuring 18.1mms long x 13.3mms wide
Description Item # 9337 - CHOCOLATE TEMPERING MACHINE Manufactured by FBM (Food Boscolo Machines) Model Maestria Year 2025 380Volts, 50Hz, 3phase R448 Gas Continuous Temperer 60Kgs Bowl capacity, running at around 180Kgs per hour User programmable and storable tempering curves for different chocolates Removable heated vibrating table Night cycle, weekly timer, automatic switch on and off Removable/reversible tempering auger Pedal-operated electronic depositor Swiveling casters
Description Item # 9338 - (3) CHOCOLATE TEMPERERS Manufactured by SELMI Model PLUS EX one is year 2023 two are year 2014
Description Item # 9358 - RUSK & CRUMB (Breadcrumb-Type Filler) PRODUCTION AND PACKAGING LINE Suitable for bakery crumb, coating crumb, and meat-industry filler manufacturing A complete, proven rusk and flake-bake production line, formerly processing 3 tonnes/hour of flour into 2.5 tonnes/hour of finished rusk and flake bake (used as a filler in sausages, pies, coatings and stuffing mixes). The line ran continuously until the site was sold in December 2025, with numerous safety upgrades installed throughout its operating life. Line includes: 2x Baker Perkins dough mixers – recently upgraded motors and gearboxes Dough sheet former – forms the dough sheet ahead of the oven Spooner oven – stainless steel panelling, three burners and controls renewed in 2024 Peg roller – breaks the biscuit sheet at oven exit Cracker – reduces biscuit to a manageable size for the next process 2x Mik ...
Description Item # 9359 - CHOCOLATE TEMPERING MACHINE Manufactured by SOLLICH Model TFD-150 tempering capacity 120kg/hr tank capacity 26kg Year 2008 400Volts, 50Hz, 4.5kVA Sieve screen with vibration motor
Description Item # 9360 - CHOCOLATE TEMPERING MACHINE Manufactured by SOLLICH Model TFD-200 Throughput Capacity: ≈ 180 to 200 kg/h depending on the chocolate recipe and properties. Integrated Tank Capacity: 30 kg. Year 1997 400Volts, 50Hz, 4.5kVA
Description Item # 9364 - CHOCOLATE TEMPERER Manufactured by SOLLICH Model SollTemper Turbo MSV-1000 A3 Year 1994 up to 1000Kgs per hour
This 8-axis DOOSAN PUMA TT2500SY was manufactured in 2008. It features a maximum turning diameter of 390 mm on the upper turret and 300 mm on the lower turret, with a maximum turning length of 350 mm. The machine includes a robust tool turret with 24 stations and a rapid traverse speed of 20 m/min for X1 and X2 axes. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT2500SY multi-spindle turning machine. Contact us for further details.
turning diameter: 12,7 mm turning length: 50 mm control: Traub System TX 8i turning speeds: 12000 U/min c-axis: 0,001° gripping station: 12,7 mm c-axis: 0,001 ° speeds: 12000 U/min rapid traverse: 15 m/min turret (x-stations): 6 worktool system: 5+3 worktool system: 3 Werkzeugsysteme total power requirement: 2,5/4 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,4 x 1,1 x 1,7 m driven tools: 6+4+4 Rev+S7+S8 CNC turning machine Traub TNL 12K with barloader LNS Tryton 112 Motor drive S8 (rear working with driven tools possible) Motor drive S7 (front working with driven tools possible) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 330 mm turning length: 669 mm control: Sinumerik 828D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 828D 12-fold revolver Sauter VDI40 driven tools C-axis 3-jaw chuck Tool Eye part catcher chip conveyor tail stock coolant device with high pressure pump bar loading device Iemca Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 600 mm max. Drehdurchmesser / max. turning diameter 330 mm max. Drehlänge / max. turning length 669 mm X-Weg / X-travel 260 mm Z-Weg / Z-travel 762 mm Drehzahl / spindle speed 3400 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes max. Stangendurchmesser / max. bar diameter 75 mm Eilgang X / rapid feed X 20 m/min Eilgang Z / rapid feed Z 24 m/min. Gewicht der Maschine ca. / weight ca. 5700 kg Technische Daten, Zu ...
centre height: 350 mm weight of the machine ca.: 50 KG tool adaptor: MK5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Heidenhain 355 tool adaptor: SK50 weight of the machine ca.: 8 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
serial number: 31302 control: Fanuc with double spindles: x turning diameter: max. 600 mm x-travel: 1000 mm with magazine: x extensive accessories: ca. 100 Aufnahmen, auch angetrieben weight of the machine ca.: 13 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: Heidenhain 355 x-travel: 850 mm y-travel: 550 mm z-travel: 450 mm tool taper: SK50 hydraulic vise: documentation: weight of the machine ca.: 5,5 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Engine: 4.4-liter Iveco 8045 4-cylinder turbo-diesel engine., Power: 95 pk (70.8 kW)., Power Take-Off (PTO): Delivers approximately 82 pk to the PTO., The rear three-point hitch has a maximum lifting capacity of approximately 4,450 kg., , Neat and tidy machine, in good working order. Tires (grass tires) are 95%, Available immediately! Maintenance performed; service invoices included, , = More information =, , General information, Year of manufacture: Oct 2003, Colour: Blue, , Technical information, Number of cylinders: 4, Type of fuel: Diesel, Drive: Wheel, Front axle: Tyre size: 380/70 R24; Steering; Tyre profile left: 95%; Tyre profile right: 95%, Rear axle: Tyre size: 16.9 R34; Tyre profile left: 95%; Tyre profile right: 95%, , Measures and weights, Empty weight: 3.895 kg, Carrying capacity: 2.105 kg, Wheelbase: 230 cm, , Functional, CE mark: yes, , Interior, Number of seats: 1, , Con ...
turning diameter: 210 / 350 mm turning length: 400 mm control: Fanuc 0i-TC swing diameter: 500 mm travel -x axis: 195 mm travel -z axis: 430 mm spindle speed:: 3500 1/min spindle bore: 75 mm bar diameter: 51 mm C-Axis: 0,001 ° turret head: 12 Pos. taper in tailstock-quill: MK 4 tailstock travel: 100 mm diameter of quill: 80 mm rapid traverse X-axis: 30 m/min rapid traverse Z-axis: 30 m/min drive capacity - spindle motor: 11 / 15 kW voltage: 400 V total power requirement: 30 kVA weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2,70 x 1,90 x 2,10 m chip conveyor: 2,80 x 0,60 x 1,30 m Transformer: 0,60 x 0,45 x 0,55 m - Serial-No.: M015356K2F - Machine ON: 14.494 h - control: FANUC Oi-TC - Machine with C-axis and turret for life tools (1x radial + 1x axial in the accessories) - Tool meeasuring arm - Parts collecting tray - Collet chuck - 3-jaw chuck Samchully Ø 250 mm - O ...
x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm control: TNC 320 HEIDENHAIN spindle taper ISO: 40 spindle turning speed range: 50 - 4.000 U/min table-size: 800 x 400 mm table load: 400 kg feeds -stepless-: 0 - 8000 mm/min rapid traverse: 8,0 m/min power capacity: 6,0 kW quill stroke: 80 mm coolant: voltage: 400 V total power requirement: 17,0 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 1,90 x 2,70 x 2,05 m - Fabr.No.: 90288 - Control: TNC --- - electrical hand wheel - Horizontal milling spindle - Coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 630 mm table width: 630 mm table load: . t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-travel: 1250 mm w-axis: 800 mm b-axis: 360 ° spindle turning speed range: 1000 U/min transmission ratio: 4 Control: Heidenhain type: 355 table surface area: 1800x2200 mm Table load: 12000 kg spindle taper ISO: 50 width of T-slots: 22 mm T-slot - distance: 160 mm Feed: 1-6000 mm/min total power requirement: 80 KVA weight of the machine ca.: 36 t dimensions of the machine ca.: 7,7x7,2x4,9 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can fi ...
faceplate diameter: 4000 mm swing diameter: 4300 mm turning height: 1750 mm slide adjustment: 1000 mm table load: 18 t turning speeds: 43,7 U/min Control: Siemens type: 840 D mm Rest: 2 chip conveyor: ram head dimension: 250x250 mm live tooling: 36 kw total power requirement: 85 KVA weight of the machine ca.: 64 t dimensions of the machine ca.: 8x5,8x8 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visi ...
faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1190 mm Control: Siemens type: 840C max. ram stroke: 1250 mm Tool changer: 12 Pos Table load: 9000 kg cross rail - adjustment: 800 mm turning speeds: 2,5-250 U/min rapid traverse: 4 m/min total power requirement: 55 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 3,95x3,6x5,56 m No. 1096/97 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look ...
spindle diameter: 100 mm x-travel: 1500 mm y-travel: 1250 mm z-travel: 1800 mm turning speeds: 7,1-1120 U/min table surface area: 1200x1200 mm w-axis: 800 mm Radial face slide: 600 mm radial face slide travel: 200 mm Tailstock: mm angular milling head: digital readout: Heidenhain total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forwar ...
Number of floors: . 0 Width of floors: . mm Depth of floors: . mm 1950x930x400 6 pieces No contents included The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 4000 mm swing diameter: 4300 mm turning height: 1750 mm slide adjustment: 1000 mm table load: 18 t turning speeds: 1-92 U/min Control: Siemens type: 840 D mm Rest: 2 chip conveyor: ram head dimension: 250x250 mm Feed: 1-4000 mm/min main gear-box motor: 55 kW total power requirement: 85 KVA weight of the machine ca.: 64 t dimensions of the machine ca.: 8x5,8x8 m The machine was overhauled in 2007. The machine is currently designed to machine rings, but can be converted again for machining large parts. Additional information Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop ...
spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-axis: 1250 mm W-axis (spindle longitudinal): 800 mm : ISO 50 P.D.B : 1800x2500 mm : 12 t : 3000 Hertz : 400 total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m ATC 40 positions Safety guarding Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was ...
spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-travel: 1250 mm w-axis: 800 mm b-axis: 360 ° spindle turning speed range: 12,5-900 U/min Control: Heidenhain type: 155 table surface area: 1800x1600 mm Table load: 12000 kg spindle taper ISO: 50 width of T-slots: 22 mm T-slot - distance: 160 mm Feed: 1-6000 mm/min table rotating: 360 ° angular milling head: total power requirement: 80 KVA weight of the machine ca.: 36 t dimensions of the machine ca.: 7,7x7,2x4,9 m Refurbished 2005 Head extension Tool kit can be purchased optionally The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are ...
used
charge load: . Diameter: . mm Diameter: Bechälter 1400 mm volt: 400 V ampere: 9 A KA NR.:: 23126958/393194 face:: 2CM5.0040/51.002.018 output: 50 Hz Operating hours: 26065 h The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
charge load: . Diameter: . mm Diameter: . mm volt: 400 V ampere: 9 A KA NR.:: 23141991/395526 face:: 2CM5.0040/51.002.018 output: 50 Hz Number of working hours: 27076 h The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of floors: . 0 Width of floors: . mm Depth of floors: . mm 1950x930x400 2 pieces Without contents The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
