t slot used for sale

General SKU390X1057 MakeSiebtechnik TypeC 402 C No.5531 Year of construction2003 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Inlet diameter80 mm Specified Features - Pusher centrifuge Pusher centrifugecheck (Turbo-Cascade centrifuge) 1-Stagecheck Basket diameter400 mm Max. basket speed2850 rpm Motor7.5 kW (500 V, 1455 rpm (Ex)) InletDN 80 Solids outletDN 80 Liquid outletDN 80 MaterialStainless steel 1.4401 (316), Stainless steel 1.4581 (316Nb) Information With switchcheck Floorspace1,25 x 0,80 m Total height0,85 m Weight650 kg CEcheck Extra SpecificationsMax. allowable solids density (ys max.): 2.00 kg/dm³ Oil fill volume: 3 L Operating pressure max allowable: 0.5 bar: pressure surge max allowable: 1.0 bar Pusher centrifugesSiebtechnikCentrifuges > Pusher centrifugesBrand > Siebtechnik What you can expect from Foeth: -- Machine is in w ...

General SKU434W1403 MakeTechnoglass / ETS de Dietrich TypeCE 8000 LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume8000 Ltr. Motor11 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity9330 l., (8000 l.) Vessel sizesø 2200x3000 mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connectionscheck OutletDN150 With jacketcheck (765 l.) Max. temperature-25/200 °C With propellor stirrercheck Motor11 kW 400 volt 1460 rpm (EX) Without motorcheck Speed mixing shaft30-190 rpm Glass Reactors MaterialGlass - Enamel (3009) Information No.3609 Year of construction1989 Mounted on legscheck Floorspace2,60 x 2,60 m Total height5,80 m Weight9500 kgGlass-lined ReactorsTechnoglassReactors > Glass-lined ReactorsBrand > Technoglass What y ...

General SKU204W060 MakeOlsa LocationBarneveld CEcheck TypeSec-2-469 Main Features MaterialStainless steel Volume1100 Ltr. Specified Features - Drying oven MaterialStainless steel 1.4306 (304L), Stainless steel 2.4602 (Hastelloy C-22) Drying ovencheck Number of compartments:1 Capacity± 1100l Internal width900 mm Internal depth1115 mm Internal height1125 mm Steam heatingcheck Number of doors:1 With fancheck Motor2,2 kW, 220/380 volt, 2820 rpm, (Ex) With rack mounted on wheelscheck With trays14x 700x380x30mm Information No.E00085 Year of construction2000 With switchcheck Floorspace1,40x1,70 m Total height1,95 m Extra Specificationstrays are made of 2.4602(hastelloy C-22) dryer and trolly are made of 1.4306( 304L) Drying ovensOlsa Spa ItalyDryers > Drying ovensBrand > Olsa Spa Italy What you can expect from Foeth: -- Machine is in working condition -- At a redu ...

General SKU335W849 MakeHoesch E. + Soehne LocationBarneveld Type40.1206 SVM F450 Dimensions Cake capacity3050 Pressure Working pressure6 Bar Main Features MaterialPolypropylene Pressure6 Bar Surface191 m2 Specified Features - Filterpress Filter presscheck Filter surface191 m²( constructed surface) Recessed chamber platescheck Number of platens136 Internal platen sizes1100x1100 mm External platen sizes1200x1200 mm Platen thicknessmultiple sizes Frame thickness22 mm With membranes on platenscheck Cake capacity3050 l With outlets on platenscheck Hydraulic closingcheck 180 bar With hydraulic unitcheck Automatic openingcheck plate shifting system MaterialMild steel, Polypropylene, Stainless steel 1.4571 (316Ti) Information No.2736 / MFP-F450 Year of construction1969 Floorspace8,4x1,78 m Total height1,70 m Weight13000kg ATEX compatiblecheck Extra Specifica ...

General SKU325W682 MakeThermo Scientific Heraus LocationBarneveld CEcheck TypeFresco 21 Main Features MaterialStainless steel Specified Features - Basket centrifuge Basket centrifugecheck Capacity18 tubes Max. basket speed14000 rpm Max. temperature40°C MaterialStainless steel Information No.41484250 Year of construction2013 Extra SpecificationsLab centrifuge 14800 - 21300 rpm , 21100 g-force 24 tubes ( 2.0/0,5 ml) rotor with screw-on lid  :Temp range -9°C-+40°C Basket centrifugesThermo Scientific HeraeusCentrifuges > Basket centrifugesBrand > Thermo Scientific Heraeus What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU366W1228 MakeThaletec TypeBE800 LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume800 Ltr. Motor4 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity910 l., (800l.) Vessel sizesdia. 1200x1200mm Dished bottomcheck Dished top sidecheck Manholecheck 320x420 mm Top connectionscheck OutletDN80 With jacketcheck (volume 200l) Max. temperature-25°C/+200°C With propellor stirrercheck2-blade cryo lock agitator Motor4 kW, 380 volt, 1430 rpm, (Ex) Speed mixing shaft23-116 rpm Glass Reactors MaterialGlass - Enamel Information No.629145 Year of construction2009 Floorspace1,4x1,4 m Total height1,2 m Extra Specificationsstraight side, mechanical seal on shaft, 2 blade cryo lock agitator, beavertail baffle, driven by 4KW/3~/ ...

General SKU314W627 MakeHosokawa Micron TypeTorus-Disc TDJS 1000-3.15 No.4056101000 Year of construction2001 LocationBarneveld Pressure Working pressure jacket3 Bar Technical specs Max. temperature50 °C Main Features MaterialStainless steel Volume3375 Ltr. Motor11 KW Specified Features - Continuous dryer Torus-disc dryercheck Continuouscheck Capacitybruto 3375 l (netto 2000 l) Trough sizes1120 x 3150 mm InletDN400 ManholeDN500 inspection port OutletDN400 With jacketcheck Shaft can be heatedcheck Max. temperature50°C Motor11 kW (400 V, 1500 rpm) Speed mixing shaft20 rpm Continuous dryers MaterialStainless steel 1.4301 (304) Information Floorspace5,45 x 1,45 m Total height2,10 m Weight7500 kg Extra SpecificationsRotor: : : - volume 107 l. : : - working pressure 3 bar, design pressure 5 bar, test pressure 7 bar. : : - working temp 50°C, design temp ...

General SKU204U055 LocationBarneveld CEcheck MakeK-tron Main Features MaterialStainless steel Motor0.45 KW Inlet diameter100 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304) Metering screws Metering screwcheck Screw diameter38 mm (2x) Pitch20 mm Shaft diameter22 mm Screw length350 mm With hoppercheck Capacity40 l InletDia. 100 mm Outlet2 x Dia. 38 mm With motorcheck With DC motor0.45 kW, 200 volt, 2000 rpm Screw speed120-600rpm With breaking/mixing shaftcheck Motorcheck Information TypeK2-ML-T35-DR-PU No.609481/913774 Year of construction9-2015 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace0,8 x 1,4 m Total height1,7 m Weight170 kg Extra Specifications- Scale LWF D5-S - Serial number # 11138195/267980 - Type WMOD -1200N-SFT - The control system has been removed from the enclosure. The machine is ...

General SKU315T1252 LocationBarneveld Main Features MaterialStainless steel Volume300 Ltr. Motor1.5 KW Specified Features - Stirring vessel MaterialStainless steel Capacity± 300 Ltr. Vessel sizesdia. 750x690 mm With covercheck Top connectionsdia. 34 mm Outletdia. 46 mm With jacketcheck With paddle stirrercheck Motorcheck 1,5 kW 380-500 Volt Speed mixing shaft10-280 rpm Stirring vessels With paddle stirrercheck Information MakeTerlet Type(unknown: missing typeplate) Mounted on legscheck With switch(as is) Floorspace1,4x1,4 m Total height1,5 m Weight570 kgStirring vesselsTerletStirring vessels > Stirring vesselsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

General SKU354T975 LocationBarneveld MakeK-tron Main Features MaterialStainless steel Motor0.37 KW Inlet diameter145 mm Specified Features - Metering screw MaterialStainless steel Metering screws Metering screwcheck Screw diameterdia. 35 mm Screw length2x 240 mm With hoppercheck Capacity± 165 Ltr. Hopper sizesdia. 650/200x1070 mm Inlet145 mm Outletdia. 70x40 mm With motor0,37 kW, 200 volt With DC motorcheck Without controlcheck(as is) Screw speed2000 rpm With breaking/mixing shaftcheck With vibro motorcheck Information TypeK2M-T35 No.10224295/263120 Year of constructionUnknown Mounted on framecheck Floorspace1,3x1,1 m Total height1,8 m Weight420 kgMetering screwsK-tronDosing units > Metering screwsBrand > K-tron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinatio ...

General SKU279U572 MakeSefil Tec TypeSF053-3 LocationBarneveld Pressure Working pressure10 Bar Main Features MaterialStainless steel Surface0.15 m2 Specified Features - Candle filter Candle filtercheck Filter surface0.15m² Number of candles3 Candle sizesDia: 25x650mm Liquid outletDia: 40mm Max. temperature80°C Capacity18Ltr. Without candlescheck MaterialStainless steel 1.4404 (316L) Information No.618 Year of construction2006 Mounted on framecheck Floorspace0,55x0,4m Total height1,2m Weight90kgCandle filtersSefil TecFilters > Candle filtersBrand > Sefil Tec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU269X293 MakeCollin TypeTeach-line E20T and BL50T No.9120 3914 Year of construction2014 LocationBarneveld Main Features Motor9 KW Inlet diameter30 mm L/D25 Specified Features - Single screw extruder MaterialStainless steel Single screw extrudercheck Screw diameter20 L/D25 Number of heating zones:2 Electric heatingcheck Air coolingcheck DC-motor1,1 kW, 400 volt, 1400 rpm Feeding with hoppercheck Max. temperature300°C Information With switchgearcheck Floorspace0,85x0,65 m Total height0,70 m Weight100 kg CEcheck Extra SpecificationsWith Teach-line film blowing line, type BL50T, dia. Take off rolls, 50 mm, roll width 200 mm, max bubble dia. 110 mm, speed 13 m/min, : winder dia. 52 mm, max pulling force 95N, max coil dia. 300 mm : Single screw extrudersCollinExtruders > Single screw extrudersBrand > Collin What you can expect from Foeth: -- Machine is ...

General SKU408X1220 LocationBarneveld CEcheck MakeTrivac Pressure Vacuum possiblecheck Main Features MaterialMild steel Volume65000 Ltr. Motor2.2 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck Number of pumps:1 Capacity65 m³/h With motor2,2 kW, 200/400 V 3~, 1450 rpm Hydraulic drivecheck MakeOerlikon TypeAR 40-65 Mach.No.18922 Year of construction2016 InletDN40 KF OutletDN40 KF Information TypeD65B Mach.No.31001371345 Year of construction2016 Floorspace0,80x0,50 m Total height0,50 mVacuum pumpsTrivacPumps > Vacuum pumpsBrand > Trivac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Transnorm conveyor belt GF 820-600-500 RA2471 Technical data: Conveyor length (NL): 820 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 820 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 scope of delivery: w ...

Transnorm conveyor belt GF 1200-600-500 RA2432 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.53 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 0,53 scope of delivery: without supports an ...

Transnorm conveyor belt GF 1060-600-500 RA2472 Technical data: Conveyor length (NL): 1060 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1060 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m  ...

Number of boring spindles: 5 St. Working width: 20-230 mm Working height: 8-160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 6 St. Working width: 20-230 mm Working height: 8-160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Feed motor: 5,5 kW total power requirement: 58,3 kw weight of the machine ca.: 4000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 180 mm Feed motor: 3 kW weight of the machine ca.: 2750 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Device number: A811023 incl. case and charging station

Motor: 2402 cm³ Motor power: 92 kW Top: Diesel Motor Model: D0FA Length 6750 mm Width 2090 mm Height 2900 mm

used inverter Altivar 61 with 132 kW (200 HP) power installed with power contactor, fuses, current transformer, etc. and control panel in the control cabinet door in a RITTAL enclosure

Motor: 2402 cm³ Motor power: 92 kW Top: Diesel Gear Range: Manual Drive: Rear-wheel drive Engine Model: FORD-D0FA Length 6601 mm Width 2084 mm Height 2342 mm Masses Gross Weight 4100 kg Registration weight 4100 kg Unladen weight 2725 kg Load capacity 1375 kg

Inv. Num. : 8965 Type: FSQ 80 NC Producer: TOS Created: 1989 Parameters: Control system: HEIDENHAIN NS 700 Work table length: 3000 mm Work table width: 800 mm Maximum vertical spindle speed: 2500 1/min X-axis travel: 3000 mm Y-axis travel: 900 mm Travel Z axis: 1000 mm Machine height: 3500 mm Machine length: 5660 mm Machine width: 4400 mm Machine weight: 18000 kg

YSTRAL InLine Mixer Conti TDS-3, Power 15 kw, 3000 rpm, max. liquid temp. for mixing 135C, PTB 98 ATEX 1106 electric motor, including power cabinet, frequency control and operation control. Machine is in working condition, used for cosmetics production. At a reduced price compared to new. Ready for shipping. You are welcome to inspect the machine in Tallinn. Detailed information available on request.

Description, subject to prior sale. Additive Manufacturing - 3D print: Trumpf TruPrint 1000 - Green Laser Basis machine: Trumpf TruPrint 1000 y.o.m. 2019 Assembly space: ∅ build cylinders 100mm, effective building area 97 mm, Building height 100 mm Operation hours 27500 h (incl. production time 2290 h) Condition excellent Laser machine: Trumpf TruDisk, 1020 Power: Single Laser Output power of 1000 W at workpiece Green wavelength: 515 nm Condition excellent. Can be seen under power. Technical indications, subject to error.

Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-s ...

pressure: 200 t table length: 2200 mm table width: 1550 mm dayligth: 2200 mm ram return capacity: 6.000 kg table load capacity: 10.000 kp total power requirement: ? ca. 25-30 kW weight of the machine ca.: 30 t dimensions of the machine ca.: 4 7 7 m Packing: ca. 13,4 x 3 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 6 - 28 mm wall strength: 2 mm bending radius min.: 2 x D Control: IPU 20 bending radius max.: 5,0 x D mm bending angle max.: 190 ° arbor length: 3000 mm operating pressure: 180 bar hydraulic motor: 4 kW weight of the machine ca.: 900 kg dimensions of the machine ca.: 3,8 x 1,1 x 1,3 m Condition: ready for operation: Video available on our website.: Electric 400 Volt: Bending segments: 15-20-26-28 mm Bending mandrels: 4 Operation panel: 0,5 x 0,6 x 1,03 m Double Foot pedal: Machine manual: Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi ...

process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3- 105 kW Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial No ...

Components: headstock, main spindle, faceplate flange, taper, table, guideway, longitudinal guide, cross guide, tailstock, workpiece holder, tailstock taper, workpiece spindle. With documentation and records. An on-site inspection is possible.

CNC lathe Type: TMM8i Manufacturer: Hurco Year: 2018 Control: Hurco WinMax 5 X: 198 mm Z: 508 mm Max turning diameter: 256 mm Swing over bed: 525 mm Swing over cross slide: 300 mm Max spindle speed: 4 800 rpm Spindle power: 13.2 kW Spindle nose: A2-6 Bar capacity: 50–52 mm 12-station servo driven turret Tool standard: VDI 30 (bi-directional indexing) Live tooling options available for milling/drilling operations Driven tools Tool probe Tailstock Chip conveyor Bar feeder: Samsys Multi 3000 Machine in good condition, under power Find more here - / Contact us at -

workpiece weight: - kg workpiece length: - mm diameter: - mm documentation: vorhanden dimensions of the machine ca.: 4,10 × 1,20 × 1,40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

met handmatige kroon Capacity: 135 ton x 3100 mm Backgauge: electric Passage between uprights: 2600 mm Max stroke: 120 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 70 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 10 hp Length: 3270 mm Depth: 1550 mm Height: 2240 mm Weight: 2,4 ton

number of spindle speeds: 6.000 U/min tool taper: BT50 numbers of positions in the tool changer: 121 control: FANUC31iMA Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000  0,001 deg The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Standard equipment: - Sturdy C-frame - Safety light barriers - Coordinate guidance with integrated Linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming option - Mono tool holder 360 rotation for all tools - Programmable hold-down device - Multi-tool drive - Punched slug extraction - Brush tables - Parts chute 200 x 200 mm Part sorting in 2 containers - NC-controlled, digital, maintenance-free three-phase AC drives - Network interface RJ34 - 3.5 Floppy Disk Station - Graphics programming TOPS 2000 -

Standard equipment: - Closed machine frame with integrated laser unit - Movement unit for high-precision machining - Gantry drive in combination with linear direct drives - Closed beam guidance - Single-cutting head strategy - Cooling unit Riedel NPP from 2003 - TFT color screen - Longitudinal conveyor belt for small parts and waste - Automatic pallet changer - Work area lighting - Position laser diode - Oil spraying device - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 Laser TruFlow 5000 - Maintenance-free turbo centrifugal blower - 250mm lens cutting head

Accessories - Machine frame with Y-boom and integrated laser unit - Laser unit: CO2 laser TruFlow4000 High-frequency excited - Maintenance-free turbo centrifugal blower - Reflecting telescope - Refrigeration unit - Position laser diode - Laser power control - Logbook function - Drives: Maintenance-free three-phase servo motors - Lighting under the boom - Magnetic coupling for processing head - Head detection - AutoLasPlus - Hanging control panel - TFT color screen - Teachpanel - Network connection RJ 45 Machining Method: - Laser cutting - Dynamic cutting head (155mm) - Cutting head (240mm) -

Standard equipment: machine - Coordinate guidance for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamping claws - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for closing the claws - Ball tables - 2 parts flaps 500 mm x 500 mm - FocusLine - Nitro Line - FastLine - Express cylinder laser parts - Cinder cone detection TRUMP Lasers - Solid-state laser TruDisk 3001 with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - Laser control TruControl 1000 - Cooling unit - Laser logbook function cutting head - Solid state laser compact cutting unit - Control Line punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / r ...

Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5 lens - Laser cutting head with 7.5 lens - Cutting head quick-change device - Autom. Sheet metal outer edge detection - Position laser diode - progr. Cutting Gas Selection/Pressure Adjustment - Microweld - PMS Plasma Sensors - Sprintlas - ContourLas - AutoLas Plus - Oil spraying device - Autom. Pallet Changer - Work area lighting - Conveyors for small parts/waste - Multi-chamber extraction - Compact dust collector - Automatic switch-off - Safety devices - ToPs 100 lite -RJ 45 network connection - 3.5 floppy disk drive

Pioneer Pump, Inc. (often referred to as Pioneer Pump”) is a global manufacturer of high-performance pumps and pump solutions used primarily in industrial and heavy-duty applications. The company is known for its robust, efficient designs that are intended to function reliably even in the harshest conditions., , Throughput capacity: 960 m3/h, Max dirt passage: 75 mm, Motor brand: JCB TC-63, Max. head: 50 MWK, Max dirt passage: 1800 rpm, , = More information =, , Year of manufacture: 2012, Applicable material: Water, Empty weight: 3.650 kg, Connector size: DN200, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or ca ...

Industrial drying oven / heating oven: Maximum operating temperature: 160°C, power: 20.6kW, double-door model, recirculating air / fresh air system, digital PID temperature controller, digital timer / process control, digital recording device / chart recorder (TE Direct), internal dimensions (W x H x D): approx. 1000mm x 1500mm x 800mm (approx. 1200l volume), external dimensions (W x H x D): approx. 1600mm x 2100mm x 1200mm, total weight: 580kg. Inspection possible by arrangement.

WMW PYE 250 ton Capacity: 250 ton Depth of throat -- ramcentre: 360 mm Max ram adjustement: 500 mm Drawning speed: 200 mm/sec Returning speed: 110 mm/sec Distance between table - ram: 1000 mm Ram area (L x D): 900 x 630 mm Eletric motor (power): 20,5 kW Weight: 8,2 ton

This wood mill was manufactured in 1990. Consider the opportunity to buy this ROBLAND Tischfräse wood mill. Contact us for further details.

Power supply model Trio PS/1AC/24DC/5, used but in very good condition.

WALTHER TROWAL - Type CA 340 -Speed range 800 - 1500 rpm -7.5 KW - Drive power -Separation facility -Soundproof cover -Control / Start / Stop / Timer / Separate Dimensions: LxWxH: 1.8x1.6x1.8 meters / Weight 1300Kg

General SKU001G010 LocationBarneveld Main Features MaterialStainless steel Volume300 Ltr. Motor0.18 KW Specified Features - Stirring vessel MaterialStainless steel Closed stirring vessel(1x) Capacity300 Ltr Vessel sizesdia. 740x750mm Flat top sidecheck With covercheck Outletdia. 50mm With propellor stirrercheck Motor0,18 KW, 220/380 Volt Speed mixing shaft± 1360 Rpm Information MakeTMCI Padovan Italy Mounted on legscheck Floorspace0,8x0,9 M Total height1,8 M Weight80 KGStirring vesselsTMCI PadovanStirring vessels > Stirring vesselsBrand > TMCI Padovan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU201P051 MakeAPI Schmidt-Bretten GmbH & Co, KG TypeSIGMA K 52 SCL Year of construction2012 LocationBarneveld Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface96.3 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L) Plate heat exchangerscheck Heating surface96,3 m2 Capacity245+242 Ltr Number of platens168 Connections(4x) DN100 Max. temperature110 degr.C. Information Floorspace2,7x0,6 M Total height1,7 M Weight2500 KGPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more mach ...

General SKUR0078 LocationBarneveld MakeTMCI Chemtech TypeCR 0327 Main Features MaterialStainless steel Motor5.5 KW Surface0.1 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Heating surface0,1 M2 Cylinder sizesdia 110 x 320mm Inletdia. 20mm Outletdia. 20mm Motor5,5 kW 380-415 Volt Information No.WO 0327/01 Year of constructionunknown Floorspace1,0x0,6 M Total height1,4 M Weight260 KgScraped surface heat exchangers-Heat exchangers > Scraped surface heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!