t slot used for sale

Key data: 400 KW

Gas type natural gas Capacity 400 Kw Engine brand Caterpillar 50 Hz , 400 V Performance class G2 Alternator Marelli

Manufacturer: Bottero Model: TRANSFER 500P Year of Manufacture: 2018 Voltage: 400 V Frequency: 50 Hz Rated Current (In): 3 A Mass: 1000 kg Minimum size : 140mm Max. size : 2000mm Thicknesses from 3mm – 19mm They have also ground 2mm glass several times. Find more here - / Contact us at -

Sela Pasta Machine TR95W I Year of manufacture 2011 4 Appearances Machine running Water purification and cooling Cutter Sales on behalf of private individuals

injection molding machine Angel Type: Victory 330/80 Tech Machine No: 155871 Age : 2005

Tip height: 195 mm Center width: 1250 mm large recirculating Ø over bed/support slide: 400/265 mm Spindle Holder/Bore: Camlock D1-6"/54 mm Tailstock quill taper: MK 5 Spindle speeds infinitely variable in 3 groups: 0 - 2500 rpm Feeds longitudinal: 0.018 - 1.2 mm Feed plan: 1/2 of the longitudinal feeds 51 metric thread pitches: 0.2 - 14 mm 56 Inch Thread: 2 - 56 Gg/" 20 module threads: 0.2 - 3.5 module 20 Diametrical Pitch Threads: 8 - 56 DP electr. Connection: 400 V, 7.5 kW Weight: 1500 kg Space requirement: 2500 x 1300 x 1300 mm

model: T500, brand: Idromec, Construction year: 2004, operating hours: approx. 11000, Shear force: 500 tons, Box length: 6 meters, Pretensioning device: No, Oil cooling: Yes, Automatic cycle: Yes, Remote control: Yes, Protective plate for slider: No, control cabin: Yes, State: as seen, not outdated, mass: approx. 58 tons, Installation: not included

Supply air system Al-ko, Alko Therm AT4 41x32 Bj. 2016 2 pieces For sale now. Fully functional.

IMA Double side label bundling machine made 2017 Used industrial equipment, lasting heavy duty equipment - rarely available. Upgrade recommendation: Sheet-fed rotary die-cutting machine „Heidelberg SORD-DC Available from Germany: immediately

cutting machine 2007 width 115 cm with monitor touchscreen USB interfaces CIP3 + CIP4 compatible ethernet interface Saddle Positioning via Joystick ergonomically arranged Two-Hand Operation press beam stop function programmable pressing force automatic pressing safety light grid plexiglass protection on the rear table stainless steel tablework surface air table side air table in production available: immediately located: Germany

X: 1000 - Y: 1500 - Z: 800 mm power: 3.2 kW Renishaw control laser control Lenght: 3259 mm Width: 2011 mm Thickness: 3510 mm

machine measurements: B/H/T 925 x 1.750 x 1.500 mm machine weight: 550 kg power capacity: -- kW Condition: used, very good condition Specification: Pad Printing Machine TPX 501 TFC E sealed Pot System - used only approx. 3 years in use consisting of: - Pad printing machine with closed ink system cliché size 450 x 220 x 0,7 mm equipped for 4-colour printing Print head with ceramic ring 96 mm incl. machine base (for a description see appendix) - printing capacity max.: 900 - 1.600 prints/hour - Drive TPX: pneumatic - Control: Microprocessor with EPROM - Tampon stroke: electronically infinitely variable programmable - Tampon vertical stroke: max. 160 mm - pad outreach: max. 149 mm - Weight with base: approx. 550 kg - Dimensions W/H/D: 925 x 1,750 x 1,500 mm - Displacement unit VR 1 Transfert Carreé E, conne ...

Rumed Type 3300 Refrigerated Incubator • Manufacturer: Rubarth Apparate GmbH, Laatzen (Germany) • Type: 3300 • Serial number: 72258.4 • Year of construction: 1996 • Power: 1.0 kW • Operating voltage: 230 V / 50 Hz • Current consumption: 4.4 A • Refrigerant: R134a • Filling weight: 0.99 kg •Ab. Operating overpressure: 18 bar • Made in Europe, CE marked Description & Areas of Application: The RUMED Type 3300 is a professional cooled incubator for laboratory applications. Ideal for: • Microbiological cultivations • Long-term storage of samples • Air-conditioned stability tests • Research and development Dimensions inside: W/D/H: 575/550/510 mm Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and u ...

MANUFACTURER: APV GAULIN MC 45 MILK HOMOGENISER TYPE: 5283 MC45-2,5 TPS CAPACITY: 20.000 l/h PRESSURE: 175 BAR 2 STAGES PRESSURE CONTROL: HYDROULIC CONTROL NUMBER OF PISTONS: 3 MOTOR 90 KW

Emhart TUCKER ETF50R.00.54/12.5.13-25BM Stud Welder Technical details: Manufacturer: Emhart Teknologies (TUCKER GmbH) Model / Type: ETF50R.00.54/12.5.13-25BM Item number: T045 006/400 Voltage: 400 V, 50/60 Hz Make: Made in Germany Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

Emhart TUCKER ETF50R.00.70/5.12-30F7 Stud Welder Technical details: Manufacturer: Emhart Teknologies (TUCKER GmbH) Model / Type: ETT50R.00.70/5.12-30F7 Item number: T045 001/400 Voltage: 400 V, 50/60 Hz Make: Made in Germany Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

TETRA PAK C10 PASTEURIZER ONLY THE PLATE HEAT EXCHANGER YEAR 2012 CAPACITY 25.000 LT/H

MANUFACTURER: Trepko TYPE: XPG 40 MOULDS: 200- 250 Gr Bricks CAPACITY: 80 pcs per minute DESCRIPTION: Trepko XPG 40 Butter forming filling and wrapping machine 200- 250 gr butter bricks with capacity 4800 pcs per hour. Butter packer, margarine packer, butter filler, margarine filler, APPLICATION: Butter, Margarine and similar high viscousity products. PRICE: Please contact

Ingersoll Rand TS3A Compressed Air Refrigeration Dryer 12 bar For sale is a used, professional compressed air refrigeration dryer from the manufacturer Ingersoll Rand – model TS3A, built in 2008. Technical features: Max Air Pressure: 175 psig (12 bar) Max. Air Inlet Temperature: 60 °C (140 °F) Cooling System: Air-cooled Operating Voltage: 400V/3Ph/50Hz Refrigerant: R404A (3.36 lbs / 1520 g) Refrigerant Oil Type: ISO 32 Polyol Ester (POE) Power consumption: 4.8 kW Weight: 230 kg Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

Manufacturer: Cleco / Apex Tool Group Type: TSE 961446PT Voltage: 380 V DC Current: 2-10 A DC Operating temperature: -20 to +70 °C Humidity: 0-90% without condensation You can also find the corresponding screw control in our shop!

Reference Num.: 4278 Brand: Theisen Bonitz Type: tb sprint B318 VP + 304 QSM Construction year: 2008 Available: directly Status: In production Location: Deutschland Equipment: - 18 Stationen - Heft-, Falz-, Schneideaggregat tb sprint 304 QSM

Transnorm conveyor belt GF 1200-600-500 RA2424 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,85 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor spe ...

Tennant T350 Nano Clean ec-H2O Manufacturer: Tennant Model No.: T350 Type: Scrubber Dryer Technology: ec-H2O NanoClean Working width: 500 or 600 mm Fresh water tank: 53 litres Dirty water tank: 70 litres Brush speed: 215 rpm Hours: 260 Condition: used Location: Bremen

feed pressure: 1,5 / 1 / 0,5 bar liter capacity: 380 / 660 / 820 l total power requirement: 2,5 / 3 kW weight of the machine ca.: 60 kg dimensions of the machine ca.: 0,62 x 0,39 x 0,46 m Package price for 10 items: 2,800,-- EUR bulk purchase negotiable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 85 mm tool adaptor: SK 50 bore of diameter max.: 130 mm adjustment of the slide: 40 mm tool tapers in the slides: 20 mm weight: ca. 3 kg Wooden box with accessories: Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tennant T5 Scrubber Dryer Manufacturer: Tennant Model No.: T5 Type: Scrubber Dryer Working width: 650 mm Fresh water tank: 85 litres Dirty water tank: 102 litres Brush speed: 230 rpm Hours: 374 Condition: used Location: Bremen

Manufacturer: Triventec Type: Dry ice blasting machine (exact type not known) Number of units available: 2 pieces Condition: used Use: Cleaning and surface treatment by dry ice blasting Location: Bremen

Toyota Forklift 7FBMF45 with Attachment FSU A450 Manufacturer: Toyota Model No.: 7FBMF45 Type: Electric Forklift Attachment: FSU A450 Load capacity: 4500 kg Lifting height: 3300 mm Drive: Electric (battery operated) Year of Make: 2008 Condition: used Location: Bremen

Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible.

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-travel: 1250 mm w-axis: 800 mm b-axis: 360 ° table:: 1800 x 2200 spindle turning speed range: 3000 U/min feed range: 4 - 3000 mm/min table load: 12 t spindle taper ISO: 50 spindle motor: 37 kW rapid traverse: 10 m/min Control: Heidenhain iTNC 530 b-axis: 360 ° total power requirement: ca 70 kW weight: 36 t range L-W-H: 8 x 8 x 3,5 m equipped with: - CNC control Heidenhein iTNC 530 & handwheel - clamping table 1800 x 2200mm, 12t -- full B-axis with 360,000 positions - coolant - IKZ 20bar & extern cooling - BLUM TC 60 Taster - without chip conveyor ca 11500 Spindle Hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2950 mm swing diameter: 3200 mm turning height: 3500 mm turning speeds: U/min main drive motor: 70 kW Control: FAGOR 8070 workpiece weight max.: 20 t column daylight: 3300 mm milling motor: 16 kW feeds crossrail-slide vertical: 3000 mm/min feeds crossrail-slide horizontal: 3000 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m equipped with: - CNC Control FAGOR 8070 - C-axis (angular positioning of the table) - angular milling Head - Telescopic covers of the cross rail and columns guideways - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Optional chuck 1200 mm - 2 Axis RSF Digital read out - Conical turning attachment - Spindle bore 130 mm - Central lubrication

turning diameter: max. 900 mm turning length: 3100 mm swing diameter over bed slide: . mm Turning diameter over slide: 640 mm Turning diameter over crank: 1100 mm spindle diameter: 110 mm speed: 7-800 (24x) workpiece weight: . kg Holder Multifix: ja total power requirement: 10 kW weight of the machine ca.: t dimensions of the machine ca.: m : 50 voltage: 380 V Multi fix toolpost Rapid traverse 2-Axis D.R.O. 3-jaw chuck diameter: 400 mm 4-jaw chuck diameter: 800 mm Fixed steady rest diameter: 580 and 360 mm Following steady rest diameter: 230 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are in ...

turning diameter: max. 720 mm turning length: 3000 mm swing diameter over bed slide: . mm Turning diameter over slide: 430 mm Turning diameter over crank: 1000 mm spindle diameter: 76 mm speed: 10-112/90-1.000 (16x) workpiece weight: max. 1500 kg Holder Multifix: ja total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m : 50 voltage: 380 V D.R.O Mitutuyo Sony 2 Axis Coolant Multifix toolpost Steady rest The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further ...

turning diameter: Max. 720 mm turning length: 4300 mm swing diameter over bed slide: . mm Turning diameter over slide: 430 mm Turning diameter over crank: 1000 mm spindle diameter: 78 mm speed: 10-112/90-1.000 (16x) workpiece weight: . kg Holder Multifix: ja total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m : 50 voltage: 380 V D.R.O. Mitutuyo Multifix toolpost Freestanding bezel diameter in mm: 180 and 400 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find ...

Offer 25375 Specifications: - Working range / cutting length for approx. 5 m raceway approx. 3000 mm - Working range / cutting width approx. 1500 mm - Control BACH - Track gauge approx. 1900 mm - 1 plasma burner with height adjustment - Plasma source KJELLBERG Hi FOCUS 160 i - Cutting current at 100% ED 10 - 160 A - Cutting range steel approx. 5 - 50 mm - Cutting range aluminium approx. 5 - 35 mm - Cutting range stainless steel approx. 5 - 30 mm - Connection 400 V / 35 kVA - Extraction table with extraction system make TEKA, type Filtercube 4 H, built in 2010 - Weight approx. 4 T - Space requirement system approx. L 7.5 x H 1.5 x D 2.4 m - Space requirement for extraction approx. L 1.5 x H 3.5 x D 1.5 m

saw blade diameter: 560/660/710 mm cutting diameter: 170/220 mm cutting range: 1000 x 220 mm cutting speed: 7- 48 m/min clamping devices hydraulic pneumatic: 20- 315 mm dimensions: 2,9 x 2,2x 1,95 m total power requirement: kW weight of the machine ca.: 2,8 t Used plate saw - part fixures - new security componens - external control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lid labeller with ribbon and thermal transfer printer type ELS 320 TL2-DB1319-SMBS201TT. Good, fully functional condition. Demonstration possible. Support available from the manufacturer.

Ice water system

Clipping machine

Presse à injecter ARBURG 100 T type 420C 1000-250 Année de fabrication : 1999 En bon état de fonctionnement Pompe neuve Force de fermeture : 1000 KN / 100 T Diamètre vis : 40 mm Volume injectable : 188 cm3 Pression d’injection : 1530 bars Rapport L/D : 18 Ouverture max des plateaux : 750 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 570 x 570 mm Entre colonnes : 420 x 420 mm Dimensions : 4,15 x 1,60 x 2,02 m

Ulma packaging line

Treif Discus Circular Knife Machine Type: Discus 400 digital control Circular knife Cutting width adjustable from 4mm to 18mm 400V 50Hz Stainless steel cladding Weight approx. 200 kg Operating voltage 400 volts Control voltage 24V/DC V AC Nominal power 0.9 kW Circular knife with Teflon coating Height: 110cm Width: 80cm Depth: 70cm

Gantry type longitudinal planer SN: 185090406.; Working table dimensions 4180 x 1100 mm. Power supply 380 V.

Used dough divider RHEON, type: Twin DIvider 400 VX 202 Dough-friendly division from roe dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - Capacity: 800 kg/h - Initial width: 130-150 mm - Weight range 1 row: 150 - 1,200 g - Weight range 2 rows: 75 - 600 g - Condition: Good, ready to use Visits and test runs are possible by arrangement.

turning diameter: 500 mm turning length: 1075 mm control: Siemens One greates pass round over bed: 660 mm Main spindle:: turning speed range - main spindle: 3500 min/-1 power capacity - main spindel: 15 /22 kW spindle diameter: 75 mm milling spindle: milling spindle motor: 15/18,5/22 kW milling head speed: 12000 U/min b-axis: -30 / +210 ° axis stroke:: x-axis: 635 mm y-axis: 260 (+/-130) mm z-axis: 1170 mm feeds:: rapid traverse ( X / Y / Z ): 36 m/min 2nd Spindle:: Subspindle Power: 15/22 kW spindle turning speed range: 4000 U/min spindle passage: 66 mm turret:: number of toolpositions: 40 pos. tool taper: HSK T 63 dimensions of the machine ca.: 7,95 x 3,3 x 3,3 m total power requirement: - kW weight of the machine ca.: 22 t dimensions of the machine ca.: 6 x 3 x 2,9 m CNC turning and milling centre - Siemens One control (5 axis Simultaneous) - C-axis, Chuck(s): 10 - Main and cou ...

: 3050 mm : 12,0 mm : - : 0,5-3,0 ° : 1000 mm table height: 930 mm work height max.: 930 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: Printing width: 600 mm Colors: 4 Chamber doctor blade units: 3 Application: Inline with bag-making machine Condition: used Features: • Manufactured by Windmöller & Hölscher (W&H) • Designed for inline use with bag-making equipment • 3 chambers with doctor blades for precise ink transfer • Compact, robust construction for easy integration • Ideal for retrofitting or adding inline print capability

Hindenlang TPESM-600 - Induction oven Max temperature: 850° Capacity: 500 kg Voltage: 400 V

Hindenlang TPESM-600 - Induction oven Max temperature: 850° Capacity: 500 kg Voltage: 400 V