t slot used for sale

Semi-automatic cut-off machine CURSAL mod. TRV 500 – CE compliant - Version with movable pressure - Feed from right to left - Rug GRT 6000x400 - N. 3 unloading benches 1000x1200 - Rejector mod. SIVARON SS-80 - Waste discharge belt tss 45° mm. 2500 - Matr. 972842 - Year 1997 - Complete with CE declaration and manual

Key data: 500 mm, 400 mm, 400 mm

Deckel FP 4M Active with 3-axis active digital display, Year of manufacture 1996 Table clamping area 800 x 460 mm Travel X / Y / Z 500 / 400 / 400mm Spindle speed 50 - 2500 rpm Feed rate 8 - 630 mm/min Rapid traverse 1500 mm/min Quill stroke 90 mm Tool holder SK 40 Hydraulic Tool Clamp Very good condition!

Multiweigh 20 heads weigher, - With horizontal vibratory feeders for fast products like frozen food or sweets/ nuts., - 20 heads, - Fully stainless steel rigidized material to prevent sticking., - With collection bucket for a faster more controllable workflow

Rotation diameter over bed/slide: 560mm/300mm, max. workpiece weight between centers: 2500kg, max. workpiece weight in chuck: 800kg, center width: 1000mm, machining length: 980mm, feed: 8m/min, bed width: 433mm, tool positions: 8, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3000mm/2300mm/1800mm, weight: approx. 3700kg, control: Siemens 810D Manual Turn. Documentation available. On-site inspection is possible.

A Trumpf CNC CO2 laser cutting system including Loadmaster is available. Laser sources: 2, laser power: 2x3200W, working range X/Y: 7000mm/2500mm, max. sheet thickness mild steel/stainless steel/aluminum: 20mm/15mm/10mm, max. traversing speed: 215m/min. Machine dimensions X/Y/Z: approx. 9000mm/4500mm/2500mm, weight: approx. 11600kg. Documentation available. On-site inspection is possible.

TECNOVA RECYCLING EXTRUDER for BIO - PE PP ABS PC PS, Barrel with 90 mm screw diam. 37 L/D, Crammed feeding unit, Is working with BIO at 70 rpm yielding 270 kg/h, with PE at 100 rpm yelds 120 kg/h, N.1 degassing point, hydraulic screenchanger, water ring pelletizer from Gamma Meccanica, drying centrifuge, rotating classifier, electric cabinet for omplete management of the line, availability: 4 weeks for reconditioning or 1 week for AS IS, capacity: 120-270 kg/h, conditions: reconditioned, type: 90 mm. crammed feeder for light scraps

TECNOVA RECYCLING EXTRUDER, for PE PP PS PC ABS, Barrel with 130 mm screw 54 L/D, as new screw and barrel, n.2 degassing pumps for slightly moist or heavy prints, hydraulic screenchanger, hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet for complete management of the line, in need of reconditioning, capacity: 500-600 kg/h, conditions: reconditioning needed, type: 130 mm. 54 L/D 2xdegassing points 500-600 kg/h nominal throughput rate

3M-Matic 800a-E Type 29600 (5799) Carton sealing machine for lid and bottom closure with adhesive tape, side belt belt drive system, carton format range in mm length 150 - ~, width 115 – 550, height 120 – 625, manual carton size adjustment, maximum carton weight approx. 38 kg, roll discharge with a length of approx. 1200 mm, drive laterally, electrical connection 380V/50Hz/3PH/1.4A, 260W, machine in mobile version on rollers, output up to 40 cartons per minute

Watercooled chiller Trane ECGWN207BA2D11DC 251.7 kW Cooling capacity: 251.7 kW / 71.57 tons (12/7 — 35°C) Year of manufacture: 2010 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Danfoss CSHN250K0AK0 (scroll) Type of refrigerant: R410a Dimensions: 2.54x0.88x1.84 m. Weight: 1420 kg. Working hours: 34500/34500/34500/34500 h. Condition: Good

Travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, axis speed: 140m/min, laser type: TruFlow 5000, laser power: 5000W (5kW), machine dimensions X/Y/Z: approx. 9300mm/4600mm/2200mm, weight: approx. 12000kg, operating hours (as of February): approx. 75000h, laser hours (as of February): approx. 42000h. Documentation available. On-site inspection is possible.

2000 litre process vessel Manufacturer: TSA Process Equipment WFI Containers NEW in original packaging Year of construction 2020 electro-polished Double-jacket, pressure-resistant Operating temperature product room 130 °C Operating temperature sheath 170 °C Accessories

Inv. Num. : 8526 Type: VC 1110 Producer: Trimill Created: 2005 Parameters: Control system: Heidenhain iTNC 530 Switch-on hours: 16373 h Hours: 14340 h Number of axes: 3 X-axis travel: 1100 mm Y-axis travel: 1000 mm Z-axis travel: 550 mm Machine weight: 16000 kg

The Tetra Pak Frigus 600 ice cream freezer is a specialized machine designed for the production and continuous freezing of ice cream and other frozen desserts. It plays a crucial role in the ice cream manufacturing process, ensuring the product reaches the desired temperature and texture while incorporating air to create a light and creamy consistency., Key Features of the Tetra Pak Frigus 600 Ice Cream Freezer:, - High Capacity: The Frigus 600 is designed to handle significant production volumes, making it suitable for medium to large-scale ice cream production., - Continuous Freezing Process: This machine allows for a continuous freezing process, which is essential for maintaining the texture and quality of ice cream. It helps achieve the right balance of air incorporation (overrun) and uniform freezing., - Precise Temperature Control: The Frigus 600 offers precise temperature and visc ...

Turning diameter: 320mm, turning length: 1000mm, spindle clearance: 80mm, speed: 3150rpm, travel X/Z: 265mm/1000mm. Machine dimensions X/Y/Z: approx. 5500mm/2400mm/2400mm, weight: approx. 7000kg, control: Traub System TX-8. Including a tool set, three-jaw chuck and bar chuck with collets. Documentation available. On-site inspection is possible.

Robot - Sepro SR Multi Inject 20 S3 Trans Year of Make: 2014 Location: Lodz, Poland Description: 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel in axes approx.: X-4000, Y-1200, Z-1500 Automatic axle lubrication Touch control panel The safety package for robots Robot with adapter and protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Robot - Sepro SR S5-25 S3 Trans Year of Make: 2013 Location: Lodz, Poland Description: 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel in axes approx.: X-2000, Y-1000, Z-1500 Automatic axle lubrication Touch control panel The safety package for robots Robot with adapter and protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Roboter - Sepro Industrial Robot SR S5-35 S3 Trans Year of Make: 2012 Location: Lodz, Poland Description: 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel in axes approx.: X-5000, Y-1400, Z-2000 Automatic axle lubrication Touch control panel The safety package for robots Robot with adapter and protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Mastip TC5 100-12-H-DHB-C-03 Year of manufacture: 2018 Location: Lodz, Poland Description: 12 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 510 mm, 2850 mm, 4 St.

Martin T54 Surface Planer Brand: Martin Type: T54 Year of manufacture: 2018 M. No.: V555076 Control panel: Sliding control panel with stop, digital readout, electric planing thickness adjustment Motor power: 5.5 kW Knife shaft speed: 6,000 tpm (increased speed) Knife shaft: X-Plane ø125 mm Contactor: Suvamatic Planing width: 5000 mm Dressing stop: 45° tiltable with Dun planing bar Spahn removal: 8 mm Table length: 2,850 mm Task - table length: 1,640 mm Acceptance - table length: 1,200 mm Table height: 850 mm Weight: 1,400 KG

Weld edge former, edge former, edge beveling machine TRUMPFFasing of steel plates for weld seam preparationType TKF 103Sheet thickness: 4 - 25 mmBevel length max: 10mmBevel angle: 30Power: 2000 wattsMains connection: 220 volts, 50 Hz- Equipped with guide bracket for 30 bevel angles - Regrindable butt steel for high tool utilization- Equipped for 20 mm sheet metalFor beveling straight and curved edges with a radius of at least 40 mm.For beveling edges on flat and curved workpieces as well as

Extraction system, central extraction, room air filter system ETS Efficient Technical Solutions GmbHZentral welding fume extractionYear of construction approx. 2005Volume flow approx. 5000 m³/hExtraction connection at the filter inlet 1200 x 150 mmExhaust air connection at the filter outlet 400 x 300 mmEngine power 10 kWNet connection 400 Volt, 50 Hz - Control cabinet for wall mounting- Bag filter- Maintenance flap for filter change- Centrifugal fan on top of the systemSpace requirement L x W x H 2000 x 1650 x 3650 mmTransport height without Fan 3100 mmWeight

Single column hydraulic press SCHÖN type TES/CBbuilt in 1977Compressive force 63 ton. (160 bar)Projection 320 mmTable size 600 x 770 mmPlunger area 600 400 mmPlunger stroke 125 mmInstallation height max. 400 mm (with intermediate plate on the ram)Slide speed Rapid traverse downwards approx. 180 mm/sec. Ram speed work approx. 25 mm/sec. Pushrod speed upwards approx. 180 mm/sec. Table height above floor 870 mmDrive power 22 kWNet connection 380 volts, 50 HzTank capacity approx. 280 litres Hydraulic oil

Electrohydraulic Scissor Fork StackerScissor Pallet Truck, Pallet Pallet TruckTOYOTA / BT Type HTH 10 EFabr. No. 481795 year of manufacture 2005Lifting capacity 1000 kgLifting height max. 800 mmOverall height drained 85 mmFork length 1190 mm- Electric stroke via 12 volts Battery operated- Manual stroke via hand lever as on the pallet truck- TOYOTA Industrial Equipment Europe SARL (Made in France)- Long-stroke hydraulic cylinder- with single roller- Integrated charger (mains voltage 230 Volts, with IEC plug)Net weight 140

MF welding machine with water-cooled impact pointMedium frequency impact pointManufacturer: TECNA (Italy) Type 3670 E CF00Serial No.: 00022 Year of construction 2014Nominal welding capacity 25 kVAMax. Welding power 160 kVANnet connection 400 volts, 50 Hz- Welding control TE750 or TE760- Impact point for one-sided spot welded joints- Ideal for repair work in the body area with the best welding quality- Water-cooled type 2BHPLN- Mobile transport trolleyWeight approx. 155 kgvery good condition - As good as new;

ESD-Electrostatically protected workbench, workbench HANDKE Industrie TechnikSingle workstation E(lectro) S(tatic) D(ischarge)Table length: 1100 / 1700 mmTable depth: 600 mmTable length Folding table: 600 mmWorking height: from 830 to 1200 mm- Volume-conductive ESD tabletop: 40 mm- Table top with hydraulic lifting system- Height adjustment via hydraulic pump by hand crank - Stable base frame made of aluminium system profile- Rear wall plate with standard square perforations- 1 piece drawer compartment W x D x H = 675 x 210 x 80 mm - 1 piece

E-chain hoist, electric hoist, crane STAHL type T510-8 / 2.0 2/1Fab. No. 1524132 Year of construction 1997Load capacity 2000 kgHook travel 4 metersMain lifting speed 4 m/min. Fine stroke speed 1 m/min. Load Trains 2Cable Length Operating Bottle approx. 0.9 metersNominal Power 1.6 kW / 0.36 kWNenncurrent 4.3 A / 2.5 ANetching Connection 400 Volts, 50 Hz- Suspension Eye on the Top of the Crane- Emergency StopWeight 75 kgGood Condition; used

Single-column eccentric press HELMERDING type TPEP 12 BMasch. No. 831-101 Comm. No. 76228 Year of construction 1976Compressive force 12 ton. Projection 155 mmTable surface 400 x 320 mmTable opening 125 mmPlunger area 125 x 100 mmLifting adjustment 6-60 mmRam adjustment range 40 mmClamping pin hole 25 mm with clamping pieceInstallation height max. 250 mmStroke rate 180 strokes/min. Drive power 1.1kW- Electric foot switch and 2-hand operation- Setup, single stroke 2-hand, single stroke foot and continuous running foot, automatic

SPECIFICATIONS: Saw blade spacing: max. 2400 mm Tilt: 0° - 45° Saw blade: Ø 200 mm Equipped with multi-function display Installed power: 1.18 kW x 2

Hydraulic 30 ton C-Frame Press CAVENAGHI & RIDOLFI Nominal Power : 30 ton Year of manufacturing: 1982

Hydraulic 30 ton C-Frame Press CAVENAGHI & RIDOLFI Technical data Nominal Power : 30 ton Year of manufacturing: 1973

Hydraulic 60 ton C-Frame Press CAVENAGHI & RIDOLFI Nominal Power : 60 ton Year of manufacturing: 1975

CNC Boring and milling machine TIGER TFA 6 , 3200x1000x1580 mm, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 3700X1000 mm, Longitudinal travel x axis: 3200 mm, Cross travel y axis: 1000 mm, Vertical travel z axis: 1580 mm, Working feed x-y-z axes: 0 - 13.000 mm/1, Rapid feed x-y-z axes: 12.000 mm/1, Spindle taper: 50 DIN 69871, Spindle speed: 0 - 2500 giri/1, Cnc: SELCA 4045, Accessories: Automatic Head 2 postion, ATC 30 tool post

At Dairy Machinery UK we offer a large variety of Spare Parts for the below manufactures. Keeping our ongoing assistance with our customers we have achieved best prices for genuine Spare Parts Directly From Manufactures ., Spare parts from these manufacturers, - Alfa Laval, - Tetra Pak, - GEA Westfalia, - GEA Tuchenhagen, - GEA Hilge, - GEA Niro Soavi, - GEA Aseptomag, - Fristam, - Pentair Südmo, - E&H (Endress und Hauser), - APV Gaulin, - APV Rannie, - SPX, - HST, - Buschjost, - Samson, - Sumitomo, - other manufacturers on request, Contact Us for your requirements., Parts available: Alfa Laval Tetra Pak GEA Westfalia GEA Tuchenhagen GEA Hilge GEA Niro Soavi GEA Aseptomag Fristam Pentair Südmo E&H (Endress und Hauser) APV Gaulin APV Rannie SPX HST Buschjost Samson Sumitomo other manufacturers on request, Gaskets for Pasteurisers: GEA, ALFA LAVAL , TETRA PAK, FISCHER,ARSOPI, PIETRIBIASI ...

Manufacturer: TIBO Model: 3-Spindel Type of Machine : Deep Drilling Machine Technical Data Deep Drilling Unit: - Control: Mitsubishi (Semi-NC) - X-axis travel: 14,000 mm - Y-axis travel: 300 mm - Z-axis travel (max. bore depth): 2,650 mm - Number of drilling spindles: 3 - Spindle spacing: 325–375 mm - Motor power per spindle: 22 kW - Table dimensions: 6,000 x 4,000 mm - Number of tables: 2 - Max. workpiece weight per table: 50 tons - Max. workpiece dimensions per table: 6,000 x 4,000 mm - Max. total workpiece dimensions: 12,000 x 4,000 mm - Max. bore diameter: 65 mm Milling Unit: - X-axis travel: 14,000 mm - Max. milling diameter: 52 mm (HSS roughing cutter) - Milling spindle power (S1/S6): 8.7 / 13 kW Manual Upright Drilling Machine: - X-axis travel: 14,000 mm - Z-axis: not specified - Max. bore diameter: 50 mm - Special feature: Table can be raised or lowered by 300 mm Tool ...

Pile feeder 1st unit : 4 buckles TI-36/4-FI (year 2000) 2nd unit 4 buckles (year 2002) 3rd unit KBI-36 (year 2006) Belt delivery SA 30 Batch counter Pump

Max. paper size: 720x1040mm, min. paper size straight printing: 360x520mm, straight/reverse printing: 440x520mm, paper thickness: 0.06-0.5mm, max. print size straight printing: 710x1030mm, straight/reverse printing: 700x1030mm, max. throughput straight printing/ straight/reverse printing: 7000/ 5000 sheets/h, printing plate size (recommended): 790x1045mm, print start: 48mm, print-free gripper margin: 10.5mm ±1mm. Equipment: Miller TP 104 basic machine with two printing units, perfecting device between the first and second printing unit, numbering tower with control for Zeiser and Leibinger mechanical numbering units (without numbering units), Spiess TP 104/1 sheet feeder, load: 10,000N. Remote adjustment via control console: colour control 1st and 2nd printing unit, fine adjustment of circumferential and lateral register: ±1.5mm, plate cylinder, 2x plate clamping rails at the front - s ...

used Stainless steel clad with heating, thermostat adjustable up to 90°C with lid External dimensions: 228x 85 H85 approx. 2000 litres with crane 230cm high with boom 130cm with motor functional but not cleaned

Mechanical Dorst TPA 45, Pressing Force max. 450 Kn, Withdrawal force max. 250 Kn, Supporting force in pressing position max. 130 Kn, Die return force max. 60 Kn, Upper punch stroke 120 mm, Upper punch adjusting travel 70 mm, Number of strokes 6-22 1/min, Filling height max. 120 mm, Pressing travel max. 60 mm, Withdrawal travel max. 60 mm, Top pressing travel max 6 mm, Upper punch pneumatic preload max. 30 mm, Compressed air supply , Air consumption , Intake air aprox. 70 l/min, Total connected load aprox. 14,0 Kw, Press dimensions:, Width aprox. 1550 mm, Depth aprox. 1650 mm, Height aprox. 2200 mm, Weight of the press aprox. 3900 Kg, Oil filling quantity :, Press housing 45 l (gear oil), Workplace-related sound 79 dB (A)

Pressing Force max.: 1000 Kn, Withdrawal force max.: 800 Kn, Supporting force in pressing position max.: 600 Kn, Die return force max.: 40 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 85 mm, Withdrawal travel max.: 95 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 80 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 23,0 Kw, Width aprox.: 1950 mm, Depth aprox.: 1550 mm, Height aprox.: 3900 mm, Weight of the press aprox.: 9.900 Kg, Press housing: 180 l (gear oil), Workplace-related sound: 78 dB (A)