t slot used for sale

Single-phase isolating transformer, portable -Type: ETR -Power: 400 VA -Protection class: IP 44 -Frequency: 50/60 Hz -Primary: 230 V -Secondary: 230 V -Price: per piece -Number: 3x available -Weight: 6.6 kg

Temperature Controller, Temperature Sensor, Temperature Setting, Temperature Converter, Temperature Limiter, Electronic Temperature Controller, Temperature Switch, Thermostat, Sensor, -Manufacturer: Trafag, thermostat temperature switch unused original packaging -Type: 471 2331 342 14 -Temperature range: 20 to 150 °C -Number: 11 thermostats available -Price per piece -Dimensions package: 80/115/H180 mm / 245/130/H80 mm -Weight: 1.1 kg/pc.

Cross table controlled, cross table NC, coordinate table, LM guide actuator, linear drive, coordinate table, precision table linear guide, CNC cross table -Cross table: with linear drives THK LM Guide Actuator KR -Travel path: x= 310 mm / y= 500 mm / z= 125 mm -Individual components: see photos -Dimensions: 750/550/H445 mm -Weight: 35 kg

Tool carrier, tool holder for milling holders, spindle head holder, modular tool pocket, tool holder set, assembly trolley, CNC transport trolley -Manufacturer: Chalice, TUL tool carrier tool holder 246 pieces -Type: SK50 -Price/tax: complete -Transport dimensions: 1200/800/H1170 mm -Weight: 221kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Tramag Fürth, transformer type CST from injection molding machine Demag D 100-275 NC -A-No.: 80258 ID.No. 06520365 -Power: 1100 VA -Technical data: see photo nameplate -Dimensions: 240/120/H220 mm -Weight: 16 kg

Tool holder for milling holders, spindle head holder, modular tool pocket, tool holder set, assembly trolley, CNC transport trolley -Assembly trolley: for 64 tool holders SK50 -Transport trolley: solid design -Quantity: 2x trolleys available, 1x 2 swivel castors / 1x 4 swivel castors -Price: per piece -Dimensions: 1140/500/H930 mm -Weight: 60kg / 63kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Smeral Trnava, single-column eccentric press type LEN 25 C -Pressure capacity: 25 tons -Clutch: pneumatic -Stroke: adjustable 8 - 85 mm -Stroke rate: 80-160 strokes/min, see photo of type plate -Table size: 435 x 560 mm -Table recess: Ø 90/180 mm -Projection: 220 mm -Punching fixture: Ø 40 mm -Insertion height 230 mm -Dimensions: press 1220/1160/H2100 mm / control cabinet 680/355/H970 mm -Total weight: 2569 kg

Limit value signaller, logic controller, trigger point control, multisafe switching amplifier -Manufacturer: Turck, multi safe limit value signal generator ovp -Type: MS91-12-R -Number: 1x module available -Price per piece -Dimension box: 130/60(H80 mm -Weight: 0.4 kg/pc.

Limit value signaller, logic controller, trigger point control, multisafe switching amplifier -Manufacturer: Turck, multi safe limit value signal generator ovp -Type: MS43-12-R -Number: 3x module available -Price per piece -Dimension box: 130/60(H80 mm -Weight: 0.3 kg/pc.

Temperature Controller, Temperature Sensor, Temperature Setting, Temperature Converter, Temperature Limiter, Electronic Temperature Controller, Temperature Switch, Thermostat, Sensor, -Manufacturer: Trafag, thermostat temperature switch unused original packaging -Type: 471 2331 342 27 8319 0065 90 -Temperature range: 20 to 150 °C -Cable length: 3000mm -Number: 2 thermostats available -Price per piece -Dimensions package: 245/130/H80 mm -Weight: 1.1 kg/pc.

Temperature gauge, temperature gauge, temperature gauge, digital thermometer -Manufacturer: testo, temperature measuring device digital thermometer with sensor -Type: 735-1 Art.No.: 0560 7351 -Measurement range: -200 to 800 °C -Probe: 0602 5792 -Dimensions cardboard: 310/150/H105 mm -Weight: 0.8 kg

Curved roller conveyor, curved conveyor, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller conveyor -Manufacturer: TGW, cam roller conveyor 90° with drive -Rollers: Ø 50 x 410 mm -Speed: 29 m/min -Drive: SEW-Eurodrive 0.37 kW, see photo nameplate -Conveyor width: approx. 410 mm -Transport dimension: 2700/1450/H300 mm -Weight: 92 kg

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Manufacturer: tmg, temperature sensor type VH54.9i301 -Item No.: 1012919 -Measuring range: -40 to 50°C -Number: 3x temperature sensors available -Price per piece -Dimension: 263/136/83mm -Weight: 0.6 kg/pc.

Hose reel, hose reel, tank hose reel, wall reel, refueling hose, chemical hose, mineral oil hose, high-pressure hose, tank truck hose -Manufacturer: Gelbring / Tonsing, HD tank hose on reel -Type: NBR-1 DIN EN 1761 / EI 1529 / VG 95955 -Hose length: approx. 240 m -Hose: Ø inside 50 mm (2) outside 66 mm -Reel: hydraulically driven -Dimensions: 1750/1590/H1360 mm -Weight: 780 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: TAE, Transformer -Type: ND 78/40-15 -Number: 4 pieces available -Price: per piece -Dimensions: 85/65/H90 mm -Weight: 1.7 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: TAE, Transformer -Type: ND 78/26-10 -Number: 2 pieces available -Price: per piece -Dimensions: 75/65/H90 mm -Weight: 1.2 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: TAE, Transformer -Type: 6 D 106/45-5 -Number: 2 pieces available -Price: per piece -Dimensions: 100/85/H115 mm -Weight: 3,6 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: TAE, Transformer -Type: 6 D 130/50-10 -Number: 4 pieces available -Price: per piece -Dimensions: 110/105/H145 mm -Weight: 6,0 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: TAE, Transformer -Type: 6 D 150/50-18 -Number: 2 pieces available -Price: per piece -Dimensions: 130/120/H190 mm -Weight: 8.8 kg

Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench, rivet gun, rivet gun, blind rivet gun, -Drive: torque module for Hilok assembly -Torque: adjustable via touch screen -Number of press-in cylinders: 1 piece -Number of helical gears: 1 piece -Working platform: 800 x 500 mm -Travel: Y 400 mm, X 955 mm -Dimensions: 1555/1470/H2110 mm -Weight: 794 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving coil instruments, moving coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, combined measuring device with data logger, anemometer, wind transmitter, wind speed sensor -Manufacturer: Thies, Windgeber 4.3350.10.000 -Measuring range: 0.3 to 75 m/s -Price: per piece -Number: 3 pieces -Dimensions: 200/210/H290 mm -Weight: 0.4 kg/piece

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motorized winch, tackle, pulling winch, block and tackle, cable winch -For passenger transport and loads: up to 500 kg -E-motor: Greifzug type C80/9-2FL 1.8 kW -Brake: Greifzug FDB 13 CHR 16 Nm -Rope speed: 18 m/min -Rope: Ø 8 mm -Rope length: 143 m -with: Rope length measuring device -Dimensions: 700/460/H600 mm -Weight: 78 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Admission recess: Ø 160 mm -Passage: Ø 56 mm -Weight: 10 kg

Tapping chucks, thread chucks, tapping chucks, tapping attachments -with: slip clutch -Integrated reverse gear with: fast reverse -Thread sizes: M5-M18 -Recording: MK3 -Dimensions: 380/95 mm -Weight: 2.6 kg

Reamers, twist drills, drill bits -Twist drill: different sizes on request -different producers -Price: Ø 10 - 30 mm EUR 0.50/mm (drill Ø 20 mm = EUR 10 net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two knife trimmers -Diameter: 10-80 mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Tool grinding machine, grinding machine, angle grinder, turning steel grinding machine, steel grinding machine -Transfer in current condition as seen -Machine must: be overhauled electrically (FI circuit breaker trips) -Grinding points: 4 -Angled tables on vibrating tables: 3 -Vice for chip breaker groove: 1 -Max. Steel cross section: mm -Number: 1x grinding machines available -Price: per piece -Dimensions: 1500/1500/H1400 mm -Weight: 1004 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 135 mm -Recording: MK2 -Drawing with the photos -Price: per piece -Number: 2 pieces -Dimensions: 200/75/H145 mm -Weight: 5 kg

Tapping chucks, thread chucks, tapping chucks, tapping attachments -with: slip clutch -Integrated reversing gear with fast reverse -Thread sizes: M1.4-7 -Recording: MK2 -Dimensions: 70/230 mm -Weight: 2 kg

Signal towers, signal lights, signal lamp, signal tower, control lamp -Manufacturer: Telemecanique -XVB C21/ XVB C2B6 -Number: 4 pieces available -Price: per piece -Dimensions: 80 x 300 mm -Weight: 0.9 kg

Accessory trolley for welding table, 3D welding and assembly tables -with: shelves for the accessories -Number: 1x tables available -Price: per piece -Dimensions: 1060/650/H1260 mm -Weight: 52 kg

Specifications: max. pressing force 320 kN Total stroke 200 mm Power stroke 12 mm Table between columns approx. 900 x 550 mm Distance table – press plate 600 mm Space requirement W x D x H approx. 1.5 x 1.6 x 2.1 m Machine weight approx. 4.6 tons . . . Machine is untested !

Axis X ... 350mm Axis Y ... 220mm Axis Z ... 220mm Machine weight ... 2100kg Max. workpiece weight ... 750kg Max. workpiece length ... 1000mm Max. workpiece height ... 220mm Max. workpiece width ... 550mm The machine is in good condition, possible to test under electricity.

TORNOS MICRO-8 CNC turning centre built in 2008 in Switzerland is distinguished by its extensive machining capabilities, sturdy design made of the highest quality cast iron and compact size. The machine designed for ultra-precise machining of workpieces with a maximum diameter of 10 mm is equipped with two reliable spindles to maximise production efficiency in any production facility, even during the most demanding challenges. The main spindle and counter spindle with integrated thermal control, retractable collet and ceramic ball bearing run on guides with increased rigidity. Both spindles are powered by reliable FANUC motors, ensuring that the necessary power is supplied for the versatile use of all the cutting tools located in the 20-position linear magazine. The arrangement of the tools in the magazine has been made in such a way as to allow simultaneous machining on the main spin ...

Code: N0200 Brand: TOMAR Model: COMO Closable double cross drying trolley for drying paints, panels, mouldings, frames, various materials Min distance between uprights mm 450 Max distance between uprights mm 3150 Length of arms per side mm 700 Useful gap between arms mm 120 N° 22 Pvc-coated shelves Load capacity kg 300 N° 4 swivel wheels for handling (2 with blocking) Handle for handling Overall dimensions: Trolley closed mm 1500 x 750 x 1900 h - Trolley max opening mm 1500 x 3350 x 1900 h Overall dimensions for transport: mm 1500 x 750 x 1900 h Weight kg 115

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-axis: 1250 mm w-axis: 800 mm b-axis: 360 ° output: 85 KVA table-size: 1800x1800 mm table load: 12 t spindle taper ISO: 50 table rotation: 360x0,0001 ° spindle motor: 37 kW spindle turning speed range: 1500 U/min feed range: 4-8000 mm/min electrics - voltage/frequency: 400 / 50 V/Hz weight of the machine ca.: 35 t dimensions of the machine ca.: 7x7x6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dear Ladies and Gentlemen, we have transformer stations 250KVA 20KV on 400V built in 1992 See photos If you have any further questions, please call 00491727265324

Tos W 100 A NC Controlled Table Type Boring Machine Machine is in good working condition Tools are included( 15 pieces BT 50 holder and more) 1650x1250 mm Turning table Heidenhain digital control

Number of working axes - 6 linear + 2x C-axis The range of diameters of cylindrical bars (min./max.) - 3-20 Workpiece length: - fixed guide bush - 250 mm - motorized guide bush - 210 mm - without a guide sleeve - 45 mm Main spindle speed - 12,000 rpm. Main spindle drive power - 2.2 / 3.7 kW Counter spindle speed - 12,000 rpm. Counter spindle drive power - 1.5 / 2.2 kW Rotational speed of the motorized guide sleeve - 200 - 12,000 rpm. Number of tools - 39 Number of powered tools - 15 The cross-section of the shank of turning tools - 16x16 mm Rotational speed of driven tools - 8,000 rpm. Drive power for tools driven on the front support - 0.75 kW Drive power for tools driven on the rear support - 1 kW Drive power of driven tools for processing the other side - 0.75 kW Oil pan capacity - 165 liters Oil pump power - 250W Installed p ...

VERTICAL LATHE TITAN MOD. SC33 Retrofited in 2003. 2-arm CNC: FAGOR 8050 Maximum diameter: 3,300 mm Table diameter: 3,000 mm. Main motor: 70 KW. Maximum S: 90 RPM (3 speed ranges) Approximate total weight: 47,000 Kg. Chip conveyor. Machine currently working in Industrial Barranquesa

TOS SKJ 12 vertical lathe The machine is technically efficient after replacing the transformer from the table rotation, worn out, requires inspection and feed adjustment Year of manufacture 1987 Documentation in Czech electrical cabinet dmensions 1630x590 mm, weight 675 kg

DECO 2000-26 year 2001 IEMCA BOSS 445 bar feeder + SERMETO chip conveyor + parts conveyor belt. 40269 Working hours S1 spindle capacity 32 mm (main headstock spindle) S4 spindle capacity 32 mm (against spindle) main operation: 2 combs capacity 5 tools each S2 motorization at reed 2 with mounting of 4 rotary tools possible A device at the end capacity 4 tools S3 motorization at the end device with mounting of 4 rotary tools possible Counter operation: 4 longitudinal fixed or rotating tools 3 transverse fixed or rotating tools S5 transverse and longitudinal engines. Pneumatic part ejector + jaws for part recovery (basket or mounted jaws) Many rotating and fixed tool holders supplied Many clamps and barrel provided Complete overhaul carried out by the machine manufacturer in December 2022 During this overhaul, the following elements were re ...

Tsugami B0326E-II CNC Swiss Type Lathe Machine has been installed in the factory in 2019! Bought brand new! Additional features which were added to the machine Main Side Left side ER16 3 x and ER20 1 x live tool slots available Main Side Right Side ER16 3 live tool slots available Chip Conveyor (Domestic) Opposite mirror 2 Extra Live Holder Slots Available Automatic fire extinguishing system available

- Distance between columns: 2800 mm - Longitudinal travel – X axis: 6000 mm - Cross travel – Y axis: 3000 mm - Vertical travel – Z axis: 1500 mm - Spindle taper: ISO-50 (DIN69871) - Power of main motor: 37 / 45 kW - Spindle speed: 3000 rpm - Working feed: 0-10000 mm/min - Rapid feed X/Y/Z: 15000 mm/min - Centralized hydraulic and lubrication unit - Electrical devices: 380V, 3 phases, 50 Hz - AC servomotors (brushless) - Control of the machine Fanuc CNC - External/Internal tool cooling unit - Heidenhain linear scales for axes - Chain type chip conveyor - Levelling devices for foundation, 1 set. OPTION (not included in the price of standard machine) - TU-37 universal automatic milling head (37 kW, 3000 rpm, 1500 Nm, ISO-50, internal-external tool cooling, 2.5° indexing in 2 planes). - Automatic Tool Changer with 40 posts for milling tools. - Floor p ...

This machine is a numerically controlled and cross rail elevating double column type vertical boring and turning mill. Is a machine with two rail heads. One, on the right side is turning head and the other, on the left side is a milling head. The right head is utilized exclusively for turning work and can withstand heavy duty operation, and left performs boring and milling work. After the turning is completed, both heads can be performed without changing the machine set-up. These features, coupled with table indexing and milling feed, assure versatility machining capabilities. The cross rail is guided by the slideways of the two columns. Electro-hydraulic clamping clamping devices assure clamping of the cross rail at the desired position. Highly accurate horizontal straightness is guaranteed by the simple and stabilized method of utilizing the compensation beam inside the cross beam. ...

Servo controlled eccentric press line 40 Ton Press capacity 860 mm max material width

Bending capacity (steel pipe) 100x6.0mm Bending radius range up to 500m Bending angle range up to 190 degrees Mandrel length 3000mm Bending speed up to 12 degrees/sec Bending accuracy +-0.2 degrees Engine power 25HP Machine dimensions 4500x2000x1750 Machine weight 3000kg The machine is used only for tests. It is in perfect condition.

Turkish made 3000 mm x 10 mm plate rolling machine 3 rolls Maximum bending thickness : 10 mm

Ideal for producing one color and two color soles for various kinds of shoes. Suitable for all kinds of thermoplastic raw materials, such as TPR, TPU, PVC, and TR.

Make: Future Tech Model: Twin Screw PET / PP / PS Extrusion Line Condition: Excellent – new after testing. Availability: Immediately Materials: PET / PP / PS (Virgin and Recycled Flake) Material Width Range: 0.18mm – 1,2mm Max Sheet Width: 1100mm Output: 1000kg/hour Main Extruder: 95mm Future Tech UV95 twin screw extruder water cooled Co-Extruder: 65mm Future tech single screw with 30kW ac motor & invertor Running from 0.18mm to 1.2mm thick PET up to 1000kg/hr. Mix of virgin, post consumer bottle flake and skeletal flake. 2 Component volumetric blending system for primary and secondary extruders. 95mm Future Tech UW95/44 twin screw extruder water cooled. 250kW ac motor with inverter drive. Triple vented with liquid ring vacuum pump system. Hydraulic screen changer, dual piston, filter dia Φ180mm, manual control. JCTimes model 275 gear pump with ac motor and  ...

TFT FCS 720 - 3 Station Thermoforming Machine The machine working hour is 73.000. Year 1994. Max Tooling Area : 685x500150 Min Tooling Area : 350250 Max Forming Area ( ROLL ) : 720500 Maximum Cycyle : 35 Maximum Material FOR FORMING : 1,5mm. It’s avaliable for PS,PET,PVC, PET. It has tauten but we advice pre-heater for PP.