t slot used for sale

TF170E Table milling machine with sliding table 1m with transverse stop

1 of un-used power supply, Schroff MPS Triple, type MPS 022, Vin 110-230 VAC (3 A), 50-60 Hz., Vout 5 V DC (23 A) / 12 VDC (3,5 A) / 12 VDC (2 A). Also known as KHKS/Kisters part numbers: 003192946 / X003192946 / K003192946

Key data: 400 mm, 800 mm

For sale TOS lahe SU80/8000 y.m. 1963/2008 Diameter above the bed: 800 mm Circulating diameter above the slide: 495 mm Distance between centers: 8000 mm Machine dimensions (wxd): 1845x11175 mm Machine cca weight: 10000 kg The lathe has a lot steady rest and DRO ESSA

SPECIFICATIONS: Installed power: 6 kW Workpiece length: 1200 mm Pin width: max 100 mm Accessories: 1 soundproofing room 1 loader

SPECIFICATIONS: Installed power: 6 kW Workpiece length: 1200 mm Pin width: max 100 mm Accessories: 1 soundproofing room 1 loader

turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tray Sealer/Skin Packer Model: Erme TSK 410 incl. compressor + MAP-GasValve MAP-Traytool 2 x 225x175mmm incl. machines can be equipped with tools for skin-packs

PISANI TR4 4-shaft beam planer: – working dimensions L=400 x H=300 mm – variable feed speed – motorized width and thickness adjustment, with digital displays on the control panel – pneumatic approaches at the inlet and in the machine center – with idle roller conveyors at the machine inlet and outlet – complete with 4 knife heads – total installed power 55 kw, volt 380 – weight about 5500 kg Trees: – under 11 kW / 15 HP – above 18.5 kw / 25 hp – right kw 11 / hp 15 – left kw 11 / hp 15 Machine not CE compliant, for export

The curing furnace consists of a tunnel furnace in which the workpieces are baked after coating. The furnace is a straight tunnel furnace. The frame is made of steel with insulated panels. The mineral wool insulation becomes 150 mm thick in a special construction to prevent thermal bridges 1 Inner dimension length 7,000 mm Inner dimensions width 1,000 mm Inner dimensions height 2,500 mm 2 Outer dimensions incl. thermoblock, length 7,200 mm Outer dimensions incl. thermoblock, width 1,300/2,300 mm External dimensions incl. thermoblock, height 2,800 mm 3 substructure 1 set of steel profiles 80 x 80 and 40 x 80 mm 4 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5010 5 Insulation 1 set of rock wool 150mm 75 Kg/m³ 6 Ventilation system 1 set of galvanized steel sheet 7 Temperature max. 220°C 8 fans 1 pc. 7,500 m³/h 9 electric motors 1 pc  ...

surface area: 800455 mm no. of flutes: - groove width: - mm weight of the machine ca.: t dimensions of the machine ca.: m Universal swivelling + tilting table Table top rotatable 360 Tiltable forwards/backwards -15 / 45° Sideways swivelling +/- 30 Cross adjustment ( Y ) 160 mm Mounting surface 350 x 250 mm ( additional adapter plate ) Table surface 800 x 455 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The US-2000 LB with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

Working width: 300 mm Number of rollers: 2 St. Feed speed: 20 m/min. weight: 300 kg Dimensions (L/W/H): 4000x600x1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various engines etc. are offered, including the manufacturers NIDEC, VEB, TECO, HEW, Motovario, Krause, SEVA, Cantoni, VEM - partly new - as a complete package. The equipment is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, to which we expressly refer.

Key data: 846 KW, 950 kVA, 400 V

Currently we offer a: Power Generator MWM / Deutz Type: TBD 616 V16 Power 846 KW / 950 KVA Generator AVK Type: DSG62L2-4 400 volts RPM 1500 IP 23 Built in 1999 Hours: 6225 Without control cabinet You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Used Chain Conveyor Belt Manufacturer: BOA Type: 1500 HG 29°HTK 11770 Year of Make: 1997 Technical data of the chain belt conveyor belt: Drive power 3 kW Length of feed belt 650 mm Length of climbing strap 10770 mm Inclination: 29° Usable width 1400 mm Height of drive axle above ground 4,260 mm Height of sidewall riser strap, inside 800 mm

Offer 24386 Specifications: - Mobile cartridge filter system with articulated extraction arms - Suitable for welding mist extraction when welding - Steel + stainless steel + aluminium + unalloyed or galvanised steels - Welding fumes class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - max. static pressure 2500 pa - Filter area 20 m² -Auto. Cleaning of the filters - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - Fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Used semi-automatic carton machine from Trepko type 71. New 2014. Technical data: - power supply 3x400V 50/60HZ - dimensions: length 2700mm, width 1940mm, height 1870mm, - weight 500kg

Used automatic scales from Mettler-Toledo Garvens type XS3. New 2012. Automatic scale for single load checking. Technical data: - Max. belt speed: 60 m/min, - Throughput: 250 pcs/min, - Product weight: max. 1500 g - min. 7 g, - Air supply Min. 500 kPh, - Operating temperature range: 0 C° / +40 C°, - Power supply 100 - 240 V~ / 50-60 Hz.

Used packer by Techmar type PAK-5.0. New 2006. Packer for kefir. Weight 750 kg. Pressure 8 bar. Power 1.8 kW. Power supply 400 V.

Toshiba MMY-MAP1204HT8P-E Air Conditioner Outdoor Unit with 6 Toshiba 4-way ceiling cassette for cold and heat incl. original Toshiba remote control Cooling power: 33.5 kW Heating power: 37.5 kW Refrigerant: R410A Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at

Toshiba MMY-MAP1604HT8P-E Air Conditioner Outdoor Unit with 6 Toshiba 4-way ceiling cassette for cold and heat incl. original Toshiba remote control Cooling power: 45 kW Power heating: 50 kW Refrigerant: R410A 2 sets available, each with 1 outdoor unit and 6 indoor ceiling cassettes including remote control Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at

ID3425 MRS type 2-5 year/Baujahr 2019 6.4 t Motorized clamshell bucket with electro-hydraulic drive, 4.3 cbm capacity, (was only in use for 1 year, dredged approx. 200,000 cbm), inclusive identical bucket (built in 2008) as spare parts carrier (the predecessor of the new bucket) Motorized clamshell grab with electro-hydraulic drive, 4.3 cbm capacity, (was only in use for 1 year, excavated approx. 200,000 cbm), including identical grab (built in 2008) as spare parts carrier (the predecessor of the new grapple)

TTS Hydraulics 7T 09 3 F PA S024 A 85 5B-S02 HOBC T LA1 COD,No. DTBO10507P SK No. BT15036893 Planetary gearboxes with hydraulics

Technical key data: Year of manufacture: June 2015 Width: approx. 19.00 m Length: approx. 25.00 m Eaves height: approx. 4.50 m Construction: hot-dip galvanized steel frame construction (bolted) Building position: free-standing on three sides, a gable wall attached to a lower intermediate building Roof & wall: insulated sandwich panels Construction & Reusability: Hot-dip galvanized, bolted supporting structure → can be optimally dismantled Very well-preserved sandwich panels → almost 1:1 reconstruction possible Core advantage: real second-life hall with minimal loss of substance Roof & lighting concept: Trapezoidal sheet metal sandwich roof continuous ridge skylight strip Additional suspended LED lights Result: very bright, energy-efficient hall Gates & Usage: 2 sectional doors with light segments Suitable for forklifts, vehicles and logistic ...

Key data: 919 KW, 1800 1/min

This marine propulsion engine is rotating, removed due to re-motorization and has 15,580 turning hours turned after complete overhaul

Used machine in good condition. Available for immediate delivery. - Control: SINUMERIK 880 T 3 - Max. length: 400 mm - Tool-holder cone: CONO ISO 50 - Tool magazine capacity: 16 #

Used machine in good condition. Available for immediate delivery. - Spindle power?: 28/21 kW - Control: 840 D SIEMENS - Axes: 5 - Workpiece diameter: 240 mm - Max. spindle speed: 5.000 rpm - Stroke (X): 190 mm - Stroke (Y): 40 mm - Stroke (Z): 555 mm - Maximum tool diameter ?: 200 mm - Main spindle bore: 79 mm - Weight: 6.500 kg

Used machine in good condition. Available for immediate delivery. - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Laser Type: CO2 - Max. workpiece weight: 710 kg - Positioning speed X/Y: 60 m/min - Simultaneous positioning speed: 85 X+Y m/min - Laser Output: 4 kW - Maximum material thickness mild steel: 20 mm - Maximum material thickness stainless steel: 15 mm - Maximum material thickness aluminium: 10 mm - Control: SINUMERIK 840D - Machine ON Working hours: 56.734 h - Beam ON Working hours: 28.407 h - Weight: 11.500 kg - Dimensions (long x wide x high): 9.300 x 4.600 x 2.000 mm

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 500 x 380 x 300 mm - Number of tool stations: 14 - Spindle taper: BT 30 - Spindle power : 2.2 kW - Control: CNC FANUC SERIE 16iM - Working area (X x Y x Z): 550 x 380 mm - Max. workpiece weight: 250 kg - Max. rapid traverse (X, Y, Z): 48 mm / min - Max. spindle speed: 1.000 rpm - Weight: 1.700 - Dimensions (long x wide x high): 1.565 x 1.907 x 2.216 mm

Conveyor system, TGW, NB 420mm, approx. 1,100m, – used - Ex-site price (net): now only 99.000.-€ instead of 269.000.-€ dismantled, packed and loaded, incl. control, feet etc.! Manufacturer: TGW Year of Make: 2016 Condition: good Available: immediately Location: Niedernberg warehouse Here is an excerpt from Hall 2: approx. 42 pieces Type: KRC KingDrive Roller Conveyor A and T Nominal width (NB) 420mm Roll pitch: 110mm Zone length: 990mm Number of KDR's per zone: 2 pieces Type Roller: Steel Conveying speed: different e.g.: .0.47m/s, Acceleration / deceleration: 1.5 m/s In different versions As above only approx. 38 pieces Type: KRC KingDrive Roller Conveyor A and T Zone length: 660mm As above only approx. 4 pieces Type: KRC KingDrive Roller Conveyor A and T Zone length: 880mm 800mm = approx. 8 pieces 770mm = approx. 3 pieces 412.5mm = appr ...

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 500 x 400 x 330 mm - Number of tool stations: 14 - Spindle taper: BT 30 - Spindle power : 5.5 kW - Control: FANUC 16i-M - Working area (X x Y x Z): 600 x 400 mm - Max. workpiece weight: 250 kg - Max. spindle speed: 8.000 rpm - Dimensions (long x wide x high): 3.000 ? 2.000 ? 2.400 mm - Weight: 2.000

OPTIONS INCLUDED: - Laser TruFlow 3600 incl. LensLine - TruTops Tube license software - Ejector station 6m with brush table - Outer circuit diameter 250mm incl. set of clamping jaws incl. guide rollers for ejection station - SeamLine Tube - Tropical version - MDE interface - LoadMaster Tube 6m with bundling cavity, 2 clamps - Scratch-free grouping cavity LoadMaster Tube 6m - LoadMaster Tube 6m oscillating transport stroke - Pitch mandrel - Max. outer circle diameter of rectangular tubes: 250 mm - Max. raw material length for automatic loading: 6.500 mm - Max. finished part length: 6.500 mm - Max. workpiece weight: 25 kg/m / 37.5 kg/m kg - Laser Output: 3,6 kW - Laser Type: CO2 - Maximum material thickness mild steel: 10 mm - Maximum material thickness stainless steel: 6 mm - Maximum material thickness aluminium: 5 mm - Control: SIEMENS SINUMERIK 840D - Machine ON  ...

Stock # U2471-1 Used horizontal vacuum paddle dryer by Drais (DE) model TR100. Contact parts designed in duplex stainless steel (AISI 1.4462). Drying chamber has internal dimensions: diameter 500 mm x length 595 mm. Total volume of chamber about 117 l. Drying chamber is designed for work on pressure range from -0,98 bar / 63 bar. Test pressure - 83,9 bar. Working temperature up to 220 C. Side walls and front door are jacketed. Total volume of jacket 24 l, working pressure 5 bar, temperature up to 220 C. Chamber doors are mounted on moveable arm and are bolted on 18 clamps. Inside drying chamber there is single shaft with 4 welded ploughs. Shaft is belt driven by gearbox and el motor 18,5 kW, 1470 rpm, 400 V, 50 Hz in Ex design (EExdeIICT4). Top feeding inlet with diameter 200 mm, central bottom discharge with manually operated valve with diameter 100 mm. Machine is mounted on carbon s ...

Used machine in good condition. Available for immediate delivery. - Operating hours: 54.860 - Pressure force: 50 t - Bending length: 1.275 mm - Axes: 6 - Distance between uprights: 1.750 mm - Working speed: 1-10 mm/seg - Throat: 410 mm - Stroke max: 215 mm - Power: installed max: 7,5 kW - Dimensions (long x wide x high): 1.930 x 2.030 x 2.375 mm - Weight: 4.750 kg

with LoadMaster - Laser Type: fiber TruDisk 5001 - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 900 kg - Simultaneous positioning speed: 265 X+Y m/min - Laser Output: 5 kW - Maximum material thickness brass: 10 mm - Maximum material thickness cupper: 10 mm - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 25 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 60.443 h - Beam ON Working hours: 26.620 h - Weight: 12.000 kg - Electric consumption entire unit: 25 kW - Dimensions (long x wide x high): 8.800 x 4.800 x 2.400 mm

Used machine in good condition. Available for immediate delivery. - Type: TASC 6000 - Pressure force: 86,68 t - Bending length: 2.720 mm - Axes: 6 - Working area: 860 x 2.210 mm - Working speed: 25 mm/seg - Control: 24 - Stroke max: 215 mm - Weight: 8.200 kg - Dimensions (long x wide x high): 3.100 x 1.740 x 2.840 mm

Includes:- Night Train automatic warehouse - Control type: Siemens Sinumerik 840D - Compressed air pressure min: 6 bar - Power supply: 80 kVA - Operating hours: n/a - Number of turret stations (pcs): 20 - Turret rotation: 30 r/min - Axis speed [X axis] max: 80 m/min - Punch diameter max: 89 mm - Axis speed [Y axis] max: 60 m/min - Working area max: 1.500 x 3.000 mm - Punching force: 270 kN - Material thickness max: 8 mm - Material thickness (punching) max: 8 mm - Material thickness aluminium max: 50 mm - Material thickness steel Fe52/Fe37 max: 5 mm - Oil tank capacity: 330 l - Material thickness stainless steel max: 3 mm - Weight: 24.000 kg

with BendMaster - Operating hours: N/A - Table width L -R: 120 mm - Inclination of beam: +-10 mm - Pressure force: 130 t - Bending length: 3.060 mm - Axes: 6 (Z1, Z2, X1, X2, R1 y R2) - Distance between uprights: 2.690 mm - Working speed: 1-10 (Y) mm/seg - Working speed: 500 (X) mm/seg - Working speed: 300 (R) mm/seg - Throat: 410 mm - Control: TRUMPF - Stroke max: 215 mm - Oil tank capacity: 250 l - Power: installed max: 18,5 kW - Dimensions (long x wide x high): 3.640 x 2.210 x 2.375 mm - Weight: 11.250 kg

Used machine in good condition. Available for immediate delivery. - Working area (X x Y x Z): 3.000 x 1.500 x 80 mm - Laser Type: CNC Fanuc 31iLB - Max. workpiece weight: 950 kg - Positioning speed X/Y: 120/120/40 m/min - Laser Output: 4 kW - Maximum material thickness mild steel: 25 mm - Machine ON Working hours: 36.200 h - Beam ON Working hours: 11.796 h - Dimensions (long x wide x high): 3.000 x 1.500 x 100 mm - Weight: 5.700 kg

Used machine in good condition. Available for immediate delivery. - Laser Type: CNC Fanuc 31iLB - Max. workpiece weight: 950 kg - Positioning speed X/Y: 160 m/min - Laser Output: 6 kW - Machine ON Working hours: 19.600 h - Beam ON Working hours: 5469 h - Weight: 5.700 kg - Dimensions (long x wide x high): 3.000 x 1.500 x 100 mm

Automatic loading up to 6.5m LoadMaster tube 6,5m with bundle cavity Minimal scratches for LoadMaster tube 6,5m Tube diameter 15mm LoadMaster Tube 6,5 (12mm semi-automatic) Ejection station 3m (incl. conveyor belt) Piece length +1,5m Workpiece tray Nitroline FocusLine ControlLine Laser power control Programmable cutting gas Lens cutting head with 150? focal length SeamLine Tube with interior detection Adaptive clamping technology - feed station Adaptive clamping - sliding chuck - Max. outside diameter of round tubes: 152 mm - Max. outer circle diameter of rectangular tubes: 170 mm - Max. raw material length for automatic loading: 6.500 mm - Max. finished part length: 4.500 mm - Max. workpiece weight: 20 kg - Laser Output: 2 kW - Laser Type: fiber TruDisk 2001 - Maximum material thickness brass: 3 mm - Maximum material thickness cupper: 3 mm - Maximum material t ...

Used machine in good condition. Available for immediate delivery. - Laser Type: CO2 - Max. workpiece weight: 120 kg - Laser Output: 3 kW - Maximum material thickness mild steel: 8 mm - Maximum material thickness stainless steel: 4 mm - Maximum material thickness aluminium: 4 mm - Control: CNC - Weight: 17.500 kg - Dimensions (long x wide x high): 18.725 x 6.635 x 2.500 mm

Used machine in good condition. Available for immediate delivery. - Simultaneous positioning speed (X / Y): 90 / 60 m/min - Number of turret stations (pcs): 19 - Control type: Siemens - Simultaneous positioning speed (X / Y): 108 m/min - Punching speed (Hit speed max.): 420 (25 mm) 1/min - Punching speed (Hit speed max.): 900 (1 mm) 1/min - Punch diameter max: 76 mm - Max. workpiece weight: 150 kg - Working area max: 2.540 x 1.270 mm - Punching force: 180 kN - Power: installed max: 9 kW - Dimensions (long x wide x high): 6.710 x 7.310 x 2.438 mm - Weight: 11.500 kg

Machine fully revised with basic maintenance realised: Including: folding crowning - Operating hours: 38.498h - Table width L -R: 120 mm - Inclination of beam: +-10 mm - Pressure force: 130 t - Bending length: 3.060 mm - Axes: 4 (X+R, Y1/Y2) - Distance between uprights: 2.690 mm - Working speed: 1-10 (Y) mm/seg - Working speed: 500 (X) mm/seg - Working speed: 300 (R) mm/seg - Throat: 410 mm - Control: TRUMPF - Stroke max: 215 mm - Oil tank capacity: 250 l - Power: installed max: 18,5 kW - Weight: 11.250 kg - Dimensions (long x wide x high): 3.640 x 2.210 x 2.375 mm

Large Format 3000x1500 Sort Master / ToolMaster SheetMaster No Grip or shearMaster - Max. workpiece weight: 220 kg - Punch diameter max: 76,2 mm - Axis speed [Y axis] max: 60 m/min - Control type: Siemens SINUMERIK 840 D - Simultaneous positioning speed (X / Y): 116 m/min - Operating hours: n/a - Axis speed [X axis] max: 100 m/min - Punching force: 220 kN - Working area max: 3.050 x 1.550 mm - Material thickness (punching) max: 8 mm - Power: installed max: 9,5 kW - Weight: 19.300 kg - Dimensions (long x wide x high): 7.600 x 8.171 x 2.072 mm

Used machine in good condition. Available for immediate delivery. - Pressure force: 130 t - Bending length: 3.230 mm - Axes: 4 - Distance between uprights: 2.690 mm - Working speed: 10 mm/seg - Throat: 420 mm - Control: TRUMPF TASC 6000 - Power: installed max: 28 kW - Dimensions (long x wide x high): 3.980 x 1.740 x 2.835 mm - Weight: 10.900 kg

Used machine in good condition. Available for immediate delivery. - Open Height: 1.000 mm - Inclination of beam: +- 3 mm - Backgauge movement: 800 (X) mm - Operating hours: 21.428 - Type: hydraulic - Pressure force: 120 t - Bending length: 3.110 mm - Axes: X, Y, R, Z1 & Z2 manual - Working area: 200 (Y), 600 (X), 880 (max. X), 320 (R) mm - Distance between uprights: 2.690 mm - Working speed: 200 (Y) / 500 (X) / 250 (R) / 1.000 (Z) mm/seg - Returning speed: 180 (Y) mm/seg - Throat: 420 mm - Control: T 3000 - Oil tank capacity: 200 l - Power: installed max: 27 kW - Weight: 8.300 kg - Dimensions (long x wide x high): 3.600 x 1.750 x 2.330 mm

Used machine in good condition. Available for immediate delivery. - Operating hours: 58.000 - Number of index tool stations, max: 21 - Max. workpiece weight: 230 kg - Punching force: 180 kN - Working area max: 3.000 x 1.550 mm - Material thickness (punching) max: 6,4 mm - Power: installed max: 3.3 kW - Dimensions (long x wide x high): 7.644 x 7.666 x 2.200 mm

Totally overhauled machine between 2017-2018 - Laser Type: CO2 - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 900 kg - Positioning speed X/Y: 200 m/min - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 6 kW - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 15 mm - Control: SIEMENS SINUMERIK 840D - Consumption values CO2: 1 l/h - Consumption values N2: 6 l/h - Consumption values He: 13 l/h - Machine ON Working hours: 50.000 h - Beam ON Working hours: 24.456 h - Weight: 12.000 kg - Dimensions (long x wide x high): 11.250 x 4.600 x 2.400 mm - Electric consumption entire unit: 33 - 72 kW