t k schneider used for sale

Process chiller / chiller air-cooled, Type: Aries TECH AST2 115 U MTA S.p.A. The Aries TECH AST2 115 HE are compact chillers suitable for outdoor installation (from -20°C to +48°C) with shell and tube evaporator, four scroll compressors, compressor shut-off valves, crank pan heater, phase monitoring, P3 double pump, tank 598 litres, electric antifreeze heater, condenser filter and control and control cabinet. Cooling capacity (kW): 315 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 53.8 Available. Pump pressure (bar): 2.99 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 4 Power levels (%): 0-25-50-75-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 158 Max. Current (A): 262 Starting Current Circuit (A): 507 P ...

Reference Num.: 3742 Brand: Adast Type: Tiegel Grafopress GPC Size: 260 x 380 mm Available: directly Status: In production Location: Deutschland Sheet size: max 260 x 380 mm

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 031 P5-NF MTA S.p.A. TAEevo Tech 031 P5-NF are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 115 ltr., built-in P5 high-pressure pump, open expansion tank 14 liters and evaporator as NON FERROUS version. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 8.98 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 1.5 Available pump pressure (bar) 5 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 6.6 Max. Current (A) 12 Starting Current Circuit (A) 47 Protection class: IP54 Dimensions: Length (mm) 1315, Width (mm) 660, Height (mm) 1373, Weight (kg) 331 Co ...

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 031 P5-NF MTA S.p.A. TAEevo Tech 031 P5-NF are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 115 ltr., built-in P5 high-pressure pump, open expansion tank 14 liters and evaporator as NON FERROUS version. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 8.98 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 1.5 Available pump pressure (bar) 5 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 6.6 Max. Current (A) 12 Starting Current Circuit (A) 47 Protection class: IP54 Dimensions: Length (mm) 1315, Width (mm) 660, Height (mm) 1373, Weight (kg) 331 Co ...

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning dia. in gap: 515 mm spindle bore: 38 mm spindle turning speed range: 30 - 2200 U/min feeds - longitudinal: 0,067 - 1,485 mm/U feeds - cross: 0,033 - 0,742 mm/U voltage: 400 V / 50 Hz total power requirement: 2,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2,3 x 1,0 x 1,5 m • with 3- and 4- jaw chuck, • 2 axis-digital display NEWALL, • fixed and live steady, • Machine light. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This is a Combi Rack Type 10-1/1 suspension rack from Rational, for the iCombi Pro and iCombi Classic 10-1/1 models. With this suspension frame, it is possible to use Bäckernorm 600x400 trays and Gastronorm trays. The RRP is €599 net. The price quoted is gross including 19% VAT (Net price: 494,96€) OUR SERVICE FOR YOU: High-quality brand-name appliances at fair prices Professional overhaul / inspection & expert cleaning tested & fully functional - or money back Shipping or self-collection can be flexibly selected Competent advice - before and after the purchase Provision of operating instructions, connection diagrams and spare parts Testing according to DGUV V3 seal ARTICLE NUMBER: 60.11.563 Condition: New VERSAND / SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations o ...

max. workpiece length: 3200,5100 mm profile spindle: 1 Stück main drive: 12 kW Control: Beckhoff CNC Number of axles: 5 St. Masterwood Project 385 CNC-Bearbeitungszentrum --------------------------------------------- 5-Achs CNC-Bearbeitungszentrum in Portalbauweise zum Einsatz für Rundbogenfenster, Türen, Pfosten-Riegel, Innenausbau, Treppen Kurze Zusammenfassung: --------------------------------------------- Arbeitsbereich: X = 3200 mm (Optional 5100 mm) , Y = 1500 mm, Z = 200 mm 1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme 1 Stk. fest installierter Bohrkopf mit 19 Spindeln mit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtung mit 6 einzeln abrufbaren Vertikalbohrspindeln Y-Richtung mit 2 doppelten Horizontalbohrspindeln X-Richtung und 1 doppelte Horizontalbohrspindel in Y-Richtung Sägeaggregat in Bohrkopf integriert 27 Werkzeugwechselplätze: Karussellwerkzeu ...

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (length / width): 4800 x 1600 x 2400 mm weight: 1500 kg Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. M ...

Mettler Toledo PCE model XMV-TE for marking, verifying and security labelling (Tamper Evident) of folding cartons, etc. for serialisation and aggregation (track & trace), the product codes and variable data (serial number, batch, expiry date, data matrix code) printed on the folding carton are checked for accuracy and quality by a camera, output up to 300 cartons per minute, folding carton width 75-200 mm, folding carton height 20-100 mm, transfer unit for folding cartons with lower belt and height-adjustable top stabilising belt with a width of 35 mm, folding carton outfeed belt with a width of 200 mm, Wolke m600 inkjet printer with 2 print heads for applying data matrix codes, etc. with PCE camera print control with a resolution of 1550 x 1200 pixel, reject ejection with collection container, 2 label dispensers for security labelling (Tamper Evident), label format min. 20 x 20 mm, max. ...

Bezner Siebmaschine | Roller classifier type TWD Refurbished (Workshop Overhauled) with new bearings (roller bearings), new ball plates and renewed screen box Make: Bezner Type: TWD Screening capacity: up to approx. 60 - 80 srm/h (for wood chips and sawdust) Screen area: 6.0 m² per screen mesh size Screen decks: 2 pieces Factions: 3 Mesh size of sieve: - 1st screen deck: punched perforated sheet metal screen, D = 45 mm or by arrangement - 2nd screen deck: punched perforated sheet metal screen, D = 10 mm or by arrangement Drive power: 5.5 kW, 3 x 400 V, 50 Hz Screen box height: 820 mm L x W x H: 4,000 x 2,200 x 1,550 mm Machine weight: approx. 5,500 kg Machine colour: RAL 6011 Reseda green Screen inserts freely selectable Design of the spouts according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Saw ...

saw blade diameter: 370x32x3 mm : 15-150 U/min vice: 190 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180x100 mm : 115 mm : 90 mm : 90x90 mm : 115 mm : 100 mm : 120x100 mm : 115 mm : 100 mm : 120x100 mm total power requirement: 5,5 kW weight: 615 kg Overall size: 1400x1400x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref.nr. 00887 Description of the system Used swap bodies vehicle Swopper 3 ACHSER Manufacturer: Fiege tec Model Swopper max 200 (3 axles) Year of manufacture 2014 (possibly also 2010) still to be clarified Self propelling chair Swopper max 200 with global viewing cab and the single-lever Masterpilot for all driving, lifting, steering and locking functions ergonomically mounted on the right side of the driver's seat. A powerful diesel engine serves as the drive. The hydrostatic drive allows the speed to be infinitely adjusted both forwards and backwards. The max. 200 is equipped with an articulated drive axle at the front and an air-sprung two-axle unit at the rear. Front tyres: two pieces 12.00-20 Industrial – Rear tyres: eight pieces 7.50-15 Industrial. Lighting according to STVZO consisting of 2 three-chamber lights, side spotlights and position lights, reversing lig ...

saw blade diameter: 350 x 32 x 2,5 mm : 15/30/45/90 U/min vice: 190 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180x95 mm : 90 mm : 90 mm : 110 mm : 95 mm : 125x95 mm : 110 mm : 95 mm : 125x95 mm total power requirement: 1,8/2,5 kW weight: 375 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350x32x2,5 mm : 15-90 U/min vice: 190 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180x95 mm : 90 mm : 90 mm : 90x90 mm : 110 mm : 95 mm : 125x95 mm : 110 mm : 95 mm : 125x95 mm total power requirement: 3 kW weight: 685 kg Overall size: 2050x1100x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref.nr 00888 Designation of the system Swap bodies Vehicle Swopper 2-axle Manufacturer: Fiege Tec Model Swopper max 200 (2 axles) Year of manufacture 2004 Self-propelled Swopper max. 200 with global viewing cab and the single-lever Masterpilot for all driving, lifting, steering and locking functions ergonomically mounted on the right side of the driver's seat. A powerful diesel engine serves as the drive. The hydrostatic drive allows the speed to be infinitely adjusted forwards and backwards. The max. 200 is equipped with an articulated drive axle at the front and an air-driven single-axle unit at the rear. Front tyres: two pieces 12.00-20 Industrial a 50% - Rear tyres: four pieces 2.50-15 Industiral approx. 50% lighting according to StVZO consisting of 2x three-chamber lights, side spotlights and position lights, reversing lights, rotating beacon Technical details Hour ...

Complete Zn drum system, double row, footprint 21 x 7 m, built-up operational condition any components NEW and unused (only test run with water) 11 stations zinc bath à approx. 0.8 m³ / wet turner / 19 static rinsing, pre-- post-treatment / loading - unloading Manufacturer: Fey Galvanotechnik, Solingen / year 2020 (individual components partly 2019) The system essentially consists of: ATB S7 control system in 12x Rittal cabinets, Simatic HMI Touch Tank park: 1x stainless steel tub (double E-def), 15x PP bathtubs (triple, double and single tubs) Drain ball valves, level bar probes, temperature sensors Immersion bath warmer: 20x double E-def, 16x single E-def, 12x zinc bath, 2x zinc electrolyte attachment, 9x (3x each) thick layer, blue, yellow; Rotkappe T-QS 630/1,25-230Ws, 1250W Oil separator (degreasing): Stainless steel Friess W20 31x drum units: filling volumes up to  ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore diameter: 620 mm spindle diameter: 130 mm bore depth: 320 mm feed stepless: 0 - 12 mm/min turning speeds: 10 - 70 U/min voltage: 380 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,0 x 1,2 x 1,3 m transportable drilling out work, completely ready for connection gear of drill spindle runs over LENZE planetary drive advanced feed with LENZE direct current motor, output: 160 watt clockwise and counterclockwise with tool holder for Ø 420 x 620 mm, tool holder for tooling equipment fabri. LENZ LPAS 3, diverse turning steel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore diameter: 550 mm Spindle diameter: 100 mm bore depth: 320 mm turning speeds: 10 70 U/min feed stepless: 0 - 12 mm/min voltage: 380 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 1.35 t dimensions of the machine ca.: 1,0 x 2,5 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Process chiller / chiller air-cooled, Type: TAEevo Tech 201P3-20 MTA S.p.A. TAEevo Tech 201 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 350 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 44.2 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 7.53 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 23.69 Max. current (A) 39.83 Starting Current Circuit (A) 134.4 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2" Serial No.: 2200412190 Year of construction 20 ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 201P3-20 MTA S.p.A. TAEevo Tech 201 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 350 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 44.2 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 7.53 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 23.69 Max. current (A) 39.83 Starting Current Circuit (A) 134.4 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2" Serial No.: 2200412190 Year of construction 20 ...

x-travel: 630 mm y-travel: 700 mm z-travel: 630 mm Control: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mm Table load: 400 kg number of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 2 t stroke: 5000 mm clamping width: 5000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Side crane with 6 meter projectionLength rail system approx: 60 metersAbout usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items Accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 2 t stroke: 4000 mm clamping width: 9200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Hoist DemagBridge traveling craneAbout usmore than 500 machines in the warehouseover 8500 m² storage area, crane capacity 70 tmore than 1000 items Accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Control: FANUC 31i-B Axes X-axis travel mm: 1050 Y-axis travel mm: 850 Z-axis travel mm: 970 B-axis degrees: 0.001º Distance between spindle - table top mm: 100-950 Work table Number of pallets: 2 Table dimensions mm: 630x630 Maximum part size (D x H) mm: ø1.100x1.100 Maximum weight of the piece kg: 1200 APC Time: 15.5 Spindle Spindle speed rpm: 10000 Spindle power kW: 30 (25% ED) Spindle torque Nm: 420 (25% ED) Tooling System Tool Holder: HSK-A100 Tool Magazine Positions: 90 Max. tool diameter mm: ø250 Max. tool length mm: 550 Tool-to-tool time: 2.4 Chip to chip time: 4.5 Equipment Electronic steering wheel Chip extractor Washing Gun Signal light High Pressure Pump Mist collector 4th axis RS 232 Interface Internal cooling 3D Renishaw tool probe 4x pallets Toolholders are not included Machine Run Times Hea ...

Teknostamp pastry sheeter Serial: 580160101 2016 tabletop pastry sheeter, overall length 2100mm, belt width 590mm, adjustable thickness, 3Ph (missing back cover)

table length: 3000 mm table width: 1500 mm burner heads: 1 laser capacity in Watt: 2000 table:: 2 x-travel: 3010 mm y-travel: 1510 mm z-travel: 100 mm control: Bosch type: CC320 Trumagraph mm total power requirement: kW weight of the machine ca.: 15,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t stroke: . mm clamping width: 18000 mm Height: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Overhead traveling crane number: 94283910About usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Protection level: 9 - 13 M Power supply: 3 Volt weight: 2 kg dimensions: 300 x 240 x 240 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Belt Strapping Machine Strap Strapping Device Manufacturer Mosca Verpackungstechnik Maschinenfabrik Gerd Mosca GmbH 69429 Waldbrunn Type RO-TR500-4 Year of construction 2001 Current connection 3 AC 400 Volt Current consumption 1.5kW 50Hz 2.5A PLC Siemens Simatic OP7 The machine can work both manually and automatically. The conveyor belt brings the packaged goods to the right place and the machine then strapping. Operating states Machine An automatic Open a frame Cut off tape

The machine was overhauled in 2013 and has not been used since then. It is in very good technical condition and works. As can be seen in the pictures, there are many gates as well as two sichel knives. If you have any questions, just call

volume capacity: 2500 m3/h 0: 3000 mm total power requirement: 1,1 kW weight of the machine ca.: 0,08 t dimensions of the machine ca.: 0,58x0,58x0,58 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

storage positions: 24 Boxen weight: 25 kg dimensions: 850 x 400 x 1650 mm Dimensions of the container 26 x 40 x 16 cm. Internal dimensions of the containers 23 x 35 x 15.5 cm. MDF cover plate thickness 10 mm. PP material (polypropylene) Overall dimensions 85 x 40 x 165 cm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.