129,479 used machines on RESALE, but how to find them? Machine Search
Make: THERMOKEY Type: 46 W2 54 3 7000 21 41 C T Year built: 2010 Power: Volume: 242.6 litres Pressure: 10 Bar Max Temperature: +120 °C Min. Temperature: -40 °C Fan: x 900mm 4 pieces Available Price on request Contact details can be found under Contact
Size: 80cm wide and 180cm high Price on request Contact details can be found under Contact
LHS-Lagertechnik GmbH sells products for the warehouse technology sector. In this ad, you will buy: - Loading aid for panel van / order picker - Serial number: 6133101 - Operating hours: approx. 4,000 H - Year of construction: 2010 - Lifting capacity: 1,000 kg - Lifting height: 1,100 mm - Fork length: 1,150 mm - Battery: 24V 620Ah 11/2010 - Including 24 volt charger - Device with gearbox noise, but still does its job - Test drive possible by arrangement – device ready for immediate use! Self-collectors welcome – free loading – shipping can be organized nationwide – please ask for your transport costs. Sale of used goods without guarantee and warranty – errors and prior sale of used goods expressly reserved.
Material : Stainless steel Dimensions: L 4.40 m x W 3.50 m x H 5.00 m --> Complete mixing tower in stainless steel version: --> with plough charmer : Manufacturer: MINOX Type: PSM 2000 / 3 MK Volume: 2000 ltr. Material : Stainless steel 3 x knife heads Main drive: 37 KW.
Key data: 6000 mm, 4 mm
With autom. Stacking and transport table, light barrier, cutting counter, with scrap diverter, compressed air required Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 6000 mm Sheet thickness steel: l 4.0 mm Sheet thickness aluminium: 6.0 mm Sheet thickness front: 2.0 mm Colour: grey Total power requirement: 11 kw/63 A Machine weight: 19,500 kg Dimensions: 6800 x 3500 x 2300 mm without cutting gap adjustment Hydraulic hold-down device Brpmi77K7Oq Column projection: 200 mm Cutting angle adjustment fixed: 1 degree Back gauge: 10 - 1000 mm Machine number: 107640
The machine is in good condition and was only used as a back-up machine for 10 years. It has been cleaned and extensively tested. so that it is immediately ready for use. The scale is calibratable. The conveyor belts are functional but no longer so beautiful. The display and computer were renewed in the last week of production. Type: S3 Rejection: Pusher Year of Make: 2006 Screen: X-Terminal HMI Dimensions: 1330 mm x 900 mm x 1700 mm. (L/W/H) Load cell: TF20 Capability characteristics: • Legal-for-trade design • Classification in up to 7 weight classes • 115/230 V~, 50/60 Hz, 1 phase, 500 VA • Automatic or manual zeroing • Various switchable program languages • 100 item storage • Flexible integration into production lines •Password S-Series Weighing Terminal: • Touchscreen color display, TFT 15 inches, • User-friendly: TachoControl, menu nav ...
Thermo Scientific Metal detector Model: Apex 500 Stainless frame, elevates from 300mm to 950mm, pneumatic blow reject with reject bin, 450mm x 160mm, belt dimensions 3300mm x 320mm, 3Ph, mobile
Belt conveyor, Transnorm, approx. 2.20m long, approx. 1m wide – used - Price ex location (net): only 995.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos33 Manufacturer: Transnorm Type: unknown Year of manufacture: unknown Length: c. 2.20m Nominal width: approx. 1m Panel width: 1.10m Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony
Climbing belt / belt conveyor, Transnorm, approx. 2.83m long – used - Ex-site price (net): only 895.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos38 Manufacturer: Transnorm Type: TS 1200 Belt Conveyor Year of Make: 2003 Length: 1230+800+800mm Nominal width: 400mm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony
Belt conveyor, Transnorm, approx. 3.55m long – used - Price ex location (net): only 995.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos40 Manufacturer: Transnorm Type: TS 1200 Belt Conveyor Year of Make: 2003 Length: 3,000mm Nominal width: 400mm Belt type: NSL – 10? LBV Strap Length: 6075mm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony
Climbing belt / belt conveyor, Transnorm, approx. 3.55m long – used - Price ex location (net): only 995.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos39 Manufacturer: Transnorm Type: TS 1200 Belt Conveyor Year of Make: 2003 Length: 1950+800+800mm Nominal width: 400mm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony
2 pieces curve belt conveyor 180 degrees, helix for climbing bands with SEW - used -: Price per piece from location: 2.995.-€ (net)! Manufacturer: Transnorm Type: 1600-105 Helix Built: 2011 Conveyor curve 180 degrees Nominal radius: 600mm Rated width: 700mm Condition: good Available: now Location: Bautzen warehouse
Climbing belt / belt conveyor, Transnorm, approx. 3.55m long – used - Price ex location (net): only 995.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos39 Manufacturer: Transnorm Type: TS 1200 Belt Conveyor Year of Make: 2003 Length: 1950+800+800mm Nominal width: 400mm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony
Belt conveyor, Transnorm, approx. 3.50m long – used - Price ex location (net): only 795.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos42 Manufacturer: Transnorm Type: unknown Year of manufacture: unknown Length: approx. 3.50m Strap width: approx. 40cm Element width: approx. 50cm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony
7x Belt Conveyor, Transnorm, approx. 4.47m long – used - Price per piece ex location (net): only 795.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos59+60+61+62+63+64+65 Manufacturer: Transnorm Type: unknown Year of manufacture: unknown Element length: approx: 4.47m Strap width: approx. 50cm Element width: approx. 60cm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony
Belt conveyor, Transnorm, approx. 3.98m long – used - Ex-site price (net): only 895.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos75 Manufacturer: Transnorm Type: TS 1100 Belt Conveyor Year of Make: 1998 Length: approx. 3.98m Nominal width: 500mm Element width: approx. 60cm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony
Motor control card Bendingroller for TBA / 8 ASU
Item number 558321-0101 IH switching card for TBA 8 aseptic filling machine
approx. 4x belt conveyors, transnorm, approx. 1m long – used - : Price per piece ex location (net): only 595.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos1+2+21+22 Manufacturer: Transnorm Type: TS 1200 Belt Conveyor / Type: 1600-105 Year of Make: 1996 Element length: 100cm Element width: approx. 50cm Strap width: approx. 40cm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony
Item nr.: 907572-0000 Counter Omron for Tetra Pak machines Omron high speed counter unit, C200H-CT001-V!
Article number: 1260522-0000 Photocell PT 21 for Tetra Pak Pull Tab Applicator 21
Item nr.: 1520450-0000 Inductor PT 21 for Tetra Pak Pull Tab Applicator
Item nr.: 90045-0394 Servo Card DMC-50720 E for PT 8 Tetra Pak Pull Tab Applicator
article nr.: 90045-0395 Digital Motor Controller (DMC) Servo Amplifier DMC 50720P AC E-372 for Tetra Pak PT 8 Pull Tab Applicator 8
PART NUMBER: 7481 Specifications: - Track width 350mm - shaft width 350mm - max blade diameter 400mm - blade bore diameter 80mm - max cutting height 120mm - table top dimensions 2050x1230mm in advance: -Triggers - pulling shaft, toothed -Triggers - shaft with saws - slip shaft, pressure shaft From below: - rollers in front of the tabletop, 2 pcs -Guide -Triggers -caterpillar - central lubrication of the track -laser - electric shaft lifting with saws - Electric body lifting - Infinitely variable feed speed - extraction spigot diameter 140mm - main motor 45kW - total dimensions length/width/height 2600x2350x1850mm - weight about 4000kg Advantages: – Czech production - with laser – used multi-rip saw – very good condition Net price: 36900 PLN Net price: 8386 EUR depending on the price of 4.40 EUR (Prices may change with higher flu ...
SKU: 90458-0602 Photocell for PT 21 Pull Tab applicator and ASU of the A3 flex aseptic filling machine
article nr.: 1282939-0000 Roller for PT 8 Tetra Pak Pull Tab Applicator
PART NUMBER: 7480 Specifications: - Track width 360mm - shaft width 350mm - max disc diameter 350mm - blade bore diameter 80mm - max cutting height 120mm - table top dimensions 2040x1220mm in advance: -Triggers - pulling shaft, toothed -Triggers - shaft with saws - slip shaft, pressure shaft From below: - rollers in front of the tabletop, 2 pcs -Guide -Triggers -caterpillar - central lubrication of the track - electric shaft lifting with saws - Electric body lifting - Infinitely variable feed speed - extraction spigot diameter 140mm, 160mm - main motor 30kW - total dimensions length/width/height 2600x2300x1850mm - weight about 4000kg ADVANTAGES – Czech production – used multi-rip saw – very good condition Net price: 37900 PLN Net price: 8614 EUR depending on the price of 4.40 EUR (Prices may change with higher fluctuations)
article nr. : 67347-0101 Control card brake of PT 8 Tetra Pak Pull Tab applicator
Item number 90023-0048 Insert Card 177, Input Card Allen Bradley for Tetra Pak e.g. TBA 8 development step 50V and before
Key data: 350 mm, 1470
Machine type: Turbo 60 Manufacturer: ERBA Power kW: 3.0 Total volume: 60 lt. Description: The ERBA Turbo 60 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 60 is available in dry and wet versions. It can be linked to the separation section listed below. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for ...
Item number 90023-0051 Output module green l771-OC Allen Bradley for Tetra Pak TBA 8 or TBA 9 aseptic filling machine technology version 50 V and in front
Item number 90023-0081 1711-DKC (24 V) Gray Encoder Module Allen Bradley for Tetra Pak TBA 8, TBA 9 aseptic filling machine technology version 50 V or before
x-travel 600 mm y-travel 500 mm z-travel 450 mm Control TNC 415 Heidenhain Main spindle: Speed range - milling 20 - 5,000 rpm Drive power - milling spindle 6 / 9 kW Tool holder SK 40 Quill stroke 90 mm Gear stages 4 swivel +/-90 ° Workbench: Bsi0Cso09Qu Table size 900 x 530 mm T-slots 7 T-slots - spacing 63 mm T-slots - width 14-H7 mm max. table load 400 kg Tool Changer: Number of tool positions 18 pos. Tool holder SK 40 max. tool diameter 85 mm max. tool diameter. with a free neighboring box. 150 mm max. tool length 300 mm max. tool weight 10 kg Tool change time max. 15 sec Feeds: Feed rate - fine adjustment 2 ~ 4000 mm/min Rapid traverse X-axis 6,000 mm/min Rapid traverse Y-axis 6,000 mm/min Rapid traverse Z-axis 5,000 mm/min Total power requirement 15 kW Machine weight approx. 3.6 t Dimensions approx. 3.4 x 3.6 x 2.2 m Tool Milling Machine - Universa ...
Item number 90031-0068 Power Supply for Tetra Pak machines e.g. TBA 8, TBA 19, A 3 flex, TCBP 70 GE FANUC Series 90-30 High Capacity Power Supply Programable
Item number 68450-0101 Karte Step Motor PT8/10 Alu o. PE Stepper Motor Driver for Tetra Pak PT 8, PT 10 (pull tab applicator)
Item number 2606305-0000 Volume flap 1 litre Square for TBA 21 Tetra Pak aseptic filling machine
Key data: 4000 , 5000 , 10500
14 nos. used MWM gas generator TCG2032V16 4 MW 10.5KV / 50 Hz, year 2011 About 40,000-44,000 hrs.
Syspal Tote bin lifter Stainless tote bin lifter, lifts to 1.5m, battery powered, 3Ph
Key data: 115 mm, 1540
Machine type: Turbo 14 Manufacturer: ERBA Power kW: 0.55 Total volume: 14 lt. Description: The ERBA Turbo 14 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces in a short process time. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 14 is available in dry and wet versions. It can be linked to a separation section. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will ...
Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may vary
Two Roll Mill 42inch wide x 16inch diam. Right angle drive Brook Crompton Motor 50HP Lunn Safety Bar front and back of Mill Hand operated nips Compact
We offer: Roller E 247165 Defect roller Crushing roller for TBA 8 aseptic filling machine Intermediate sale reserved
Key data: 135 mm, 1550
Machine type: Turbo 20 Manufacturer: ERBA Power kW: 1.1 Total volume: 20 lt. Description: The ERBA Turbo 20 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces in a short process time. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 20 is available in dry and wet versions. It can be linked to a separation section. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will ...
Key data: 220 mm, 1550
Machine type: Turbo 35 Manufacturer: ERBA Power kW: 1.5 Total volume: 35 lt. Description: The ERBA Turbo 35 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 35 is available in dry and wet versions. It can be linked to the separation section listed below. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will be happy ...
Manufacturer: Tecnimetal Internationale Type: P&S Built: 2004 Total length: approx. 240 cm Total width: approx. 65 cm Total height: approx. 145 cm Basket height: approx. 60 cm Opening for chain: approx. 145 cm All information without guarantee
STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5
maximum number of results exceeded
please refine your search
