t k schneider used for sale

Radial drilling machine. Drlling capacity: 40-50mm. Arm of 1250mm. Taper Morse 5.

10,06 m shelving racks, 40cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 40 cm L : approx. 10,06 running meters Shelf offer 10,06 running meters consisting of: 11 x stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 50 x base approx. 100 x 40 cm. 200 x shelf holders. 11 x diagonal 1176 mm ( for crossing ). 11 x turnbuckle (for crossing). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1241,00 € net plus leg ...

5,06 m shelving racks, 40cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 40 cm L : approx. 5,06 m Shelf offer 5,06 running meters consisting of: 06 x Stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 25 x floor approx. 100 x 40 cm. 100 x shelf holders. 06 x diagonal 1176 mm ( for crossing ). 06 x Turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 636,00 € net plus legally valid VAT  ...

30,06 m shelving racks, 40cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 40 cm L : approx. 30,06 m Shelf offer 30,06 running meters consisting of: 31 x stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 150 x floor approx. 100 x 40 cm. 600 x shelf holders. 31 x diagonal 1176 mm ( for crossing ). 31 x turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 3661,00 € net plus legally vali ...

2,06 m shelving racks, 40cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 40 cm L : approx. 2,06 m Shelf offer 2,06 running meters consisting of: 03 x Stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 10 x floor approx. 100 x 40 cm. 40 x shelf holders. 03 x diagonal 1176 mm ( for crossing ). 03 x Turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 273,00 € net plus legally valid VAT Y ...

Winding machine / squirrel wrapper / dough wrapper in a very good used and functional condition. Can be used for rolling and winding teigen etc. Completely made of stainless steel, transport belt supported by air, bandwidth 46 cm, can also be operated in combination (4x in stock). Dimensions W/D/H 190/70/130 cm. Workshop tested, ready for use. More on request.

100,06 running meters shelf racks, 60cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 100,06 running meters Shelf offer 100,06 running meters consisting of: 101 x stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 500 x floor approx. 100 x 60 cm. 2000 x shelf holders. 101 x diagonal 1176 mm ( for crossing ). 101 x turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price:  ...

10,06 running meters shelf racks, 60cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 10,06 running meters Shelf offer 10,06 running meters consisting of: 11 x stand approx. 200 x 60 cm, disassembled (incl. 2 x foot & 2 x cover cap). 50 x base approx. 100 x 60 cm. 200 x shelf holders. 11 x diagonal 1176 mm ( for crossing ). 11 x turnbuckle (for crossing). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1422,00 € net  ...

60,06 m shelving racks, 60cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 60,06 running meters Shelf offer 60,06 running meters consisting of: 61 x stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 300 x floor approx. 100 x 60 cm. 1200 x shelf holders. 61 x diagonal 1176 mm ( for crossing ). 61 x turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 8000,00 € net plu ...

30,06 running meters shelf racks, 60cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 30,06 m Shelf offer 30,06 running meters consisting of: 31 x stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 150 x floor approx. 100 x 60 cm. 600 x shelf holders. 31 x diagonal 1176 mm ( for crossing ). 31 x turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 4199,00 € net plus lega ...

5,06 m shelving racks, 60cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 5,06 m Shelf offer 5,06 running meters consisting of: 06 x Stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 25 x floor approx. 100 x 60 cm. 100 x shelf holders. 06 x diagonal 1176 mm ( for crossing ). 06 x Turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 728,00 € net plus legally valid VAT  ...

Tiede Universal U550 GW Magnetic Electric Crack Detector Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic Electric Crack Detector Rated operating current I 5400 A AC seats or 3800 A AC effective, adjustable in 8 steps Flow Ø: 8000 Aw full wave DC. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetization coil lights Ø 800 Bushing Ø: 5000 Aw with alternating current adjustable in 8 stages, chamois according to DIN 54131 Year of construction 1984 Accessories/special equipment Electronic magnetization controls Degaussing device Support rolls Blackout cabin Main machine dimensions Total length mm 8.000 Total width mm 2,500 Total height mm 2.500 Scope of work Remarks Nominal diameter mm ~5.500 Field of application: Testing of crankshafts. Item condition: used Further technical data can be found on the machine  ...

Bolt feeders Manufacturer: Tucker Type: BV 50D.00.44/5.18F8 and BV 50D.10.01/5(12-25) There are 2 pieces. The price is for 1 PCs.

Qty. 1 Second-hand Powder coil coating line on aluminium strip 1500 mm wide Mfc.: TBA Built: 1991 Coating thickness: 60 microns Revamped by OTEFAL in 2003 Powder booth changed in 2011 – GEMA Coil coater for the pre-treatment changed in 2013 Degreasing section re-built in 2010 – OTEFAL Electrical device changed in 2006 Strip width: 800 - 1500 mm Strip thickness: 0.8 – 2.0 mm A wide range of colors - over 300 different shades Capacity: 9000 tons/year in 3 shifts work 5/7 Days so 2 000 000 m² Spool dia.: 508 or 610 mm Outside coil dia.: 1500 mm Average speed: 7.5 m/min.

Rotary vane vacuum pumps lubricated 2-stage Status: Rebuilt warranty: 12 months Manufacturer: Leybold Type: Trivac D16B Suction capacity: ca. 16 m³/h Discharge pressure: approx. 5x10e-3 mbar Engine: 400V DS Resources: Mineral oil Accessories: owner's manual Oil mist separator optional Delivery time: By appointment (subject to prior sale) Spare parts, equipment or alternative pump on request.; ready for operation

Planers/Mills Manufacturer: Tennant Type: K4 Petrol engine Accessories: 2 extra rolls, 1 x new battery Caution: The motor starts but not continues. Probably is located on carburettor. All information without guarantee

We offer a Peri Trio formwork system 233,28m² complete with accessories. The formwork is in a completely mint condition and covered with new original Peri Finply, or plastic formlining Hewagen II. The frames are completely cleaned and sealed with zinc phosphate coating corrosion. The formwork is immediately suitable for higher-quality applications, e.g. SB3. Other elements or accessories available on request. 18 Element TR 270 x 240 new formlining 14 Element TR 270 x 120 new formlining 8 Element TRS 270 x 90 new formlining 6 Multipurpose element TRM 270 x 72 new bel. 4 Element TR 270 x 72 new formlining 10 Element TR 270 x 60 new formlining 8 Element TR 270 x 30 new formlining 6 corner TE 270-2 new formlining 160 Richtschloss BFD, dir. 30 compensating bars TAR 85 new 2 offset hooks Maximo 1,5 T new 1 transport hanger MX / Trio new 12 frontal anchors TS, dir. n ...

Blender Talsa MIX95P; 400 V, new, Bowl capacity 95 litres, engine completely in stainless steel, separate stirrer and Bowl drive, 1 speed, forward and return, Bowl tilt, Dimensions Lxwxh approx. 108x80x120cm, weight 170kg New machine, built in 2018

Depositor Serial: D150P511007 2003, stainless single shot depositor, rise and fall head, 25L depositor, mobile frame,

Soco systems Model: T10 Case taper Serial: 49692 top and bottom case taper, side grip belts, max box 500mm L x 450mm W x 500H, mobile, 3Ph

Rubber Air Spring, Vibratory mounts, Machine Feet, Machine Legs, Antivibratory feet, Leveling Feet, Heavy Duty Feet Load (Kg/pc): 1200 - 3400 Max. Pressure Bar: 6 Dimensions: S: 370mm D: 360mm H App: 111mm d: 200mm h: 8mm Bolt: M20 Four pieces on stock. Similar models that we can produce: TL1: Load (Kg/pc): 25 - 60 Max. Pressure Bar: 3 TL2: 80 - 300 Load (Kg/pc): Max. Pressure Bar: TL3: Load (Kg/pc): 270 - 800 Max. Pressure Bar: 5 TL4: Load (Kg/pc): 650 - 1500 Max. Pressure Bar: 6 TL6: Load (Kg/pc): 3000 - 6500 Max. Pressure Bar: 6 It can fit to Bruderer, Mabu, Schaal, Schuler, Haulich and other machines. For any questions please contact us.

Combination of suction Sweeper and wet scrubbing machine with 4 cyl. Kubota diesel engine, infinitely variable hydrostatic travel drive, automatic functions. Max working width 1270 mm, high emptying. Solid technology from a brand manufacturer, ideal for indoor and outdoor areas! 2 x available: Year 2006 / 220 h and year 2005 / 1020 h More Sweepers on stock - information, photos and special offers on request!

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

The DH exxactly. TRP is used where a tape measure is too inaccurate and a caliper is too short. Ideal for measuring wooden panels, Aluminium, steel, plastic and glass as well as pipes, profiles and rods. Version as a tabletop unit or on a mobile base For dimensional control in the machine room, in incoming goods or quality assurance For daily inspection of your own machine lines Smooth-running guidance for precise and fast measurement Safe measurement of long workpieces by one person Measuring range of choice 1,000 to 7,000mm (longer version possible on request) Easy-to-read large digital display "Lowest-Power-LCD" Power supply depending on the display unit battery or Mains connection 100-240 VAC; 50/60 Hz Dimension display at 1/10 mm Accessories: With interchangeable centering tips suitable for measuring hole distances Interface with data connection to a PC for logging  ...

Tube filling- and closing machine for pre capped ALU tubes. Machines is fitted with a tube loader TZ101, Laetus coding device and various accessories. PLC: Siemens type Simatic S5. Output: 80 tubes/min.

Good day have with this machine a top TECA print up to 4 colours! Carrée and pad cleaning! Absolute Professional machine. If you have questions just email!

SOS block bottom bag machine 1 ply photo cell for preprinted paper 4 colour tail end printer Bag width: 5-12 cm Tube length: 12-34 cm Bottom width: 3-7,5 cm

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

SOS Block bottom bag machine 2 plies photo cell for preprinted paper 4 colour tail end printer bottom patch and 1 colour tail end printer for bottom patch Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

Stock # U2267-2 Second hand stainless steel contact parts (316Ti) sand mill by Drais (Germany) model Perl-mill PMC 12.5 TEX. Machine has total volume of milling chamber 17.2 l and working volume about 12 l. Mill has rotor with plastic rings and works with rotation speed up to 1450 rpm. Machine is driven via belt gearbox by electric motor 13.5 kW, 1500 rpm, 400 V, 50 hz, Eex eIIT3 design. Mill is equipped with feeding pump, filter and electric cabinet. Includes technical documentation. Machine new 2002.

BRAND: TERRACUBED YEAR: 2022 MODEL: T1000 PRODUCTION HOURS: 250 APPLICATION TYPE: 3D PRINTING LOCATION: LITHUANIA MACHINE TYPE: 3D PRINTER AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: DUET3 Technical Information CONTROL UNIT BRAND: DUET3 MODEL: MB6HC Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - BUILD VOLUME: 1X1X1M - PRINT SPEED: UP TO 1M/S - EXTRUDER FLOW: UP TO 3KG/H - LAYER HEIGHT: 0. 5-2MM - NOZZLE: 1MM, 3MM, 5MM (CURRENTLY EQUIPED WITH 3MM ) - CALIBRATION: 3 POINT TRUE BED LEVELING + 100 POINT MESH BED LEVELING - MOTION: TECNIC SERVO MOTORS AND CONTROLLERS EQUIPPED WITH WEB CAMERA FOR REMOTE INSPECTION CONTROLLER WIRELESSLY - ACCURACY: 0,05MM - ANDROID TABLET IS INCLUDED WITH THE PRINTER QUALITATIVE MACHINE BENEFITS: - MAINBOARD IS DUET3 BOARD. IT'S DETAILS ARE AS FOLLOWS: REPRAPFIRMWARE FOR DUET 3 MB6HC FIRMWARE_VERSION: ...

Capping machine for Tetra Pak line year: 2008

For sale is a used base plate with accessories. For sale only within Europe. Price factory Travenhorst. Foundation plate No.: 543688 80, 3x Holder 528729 02, 9x Screw Tel: 0049 45569819444 ---------------------------------------------------------------------- ------------- Our company: For many years now, we have been supporting national and international companies as a recovery plant for separators. In our new plant, Alfa Laval and Tetra Pak separators / centrifuges are generally overhauled at the highest level for our customers and converted on request.Our centerpiece, the test bench, is constantly being expanded in order to reach the highest performance of the various machines permanently and reliably. As a result, our customers profit from the modernized separators in terms of availability and costs. Benefit from our experience - benefit from our services!

Buckles Heidelberg Model Ti52 Specifications 1 set of buckles for Heidelberg Stahlfolder Ti52/4, might be suitable for older versions Available direct

Technical data: -Bending mot. Automatic or manual mode -Bending performance square steel ST 37 up to approx. 25 mm -Bending performance ST 37 steel up to approx. 30 x 8 mm -Bending length betw. the adjustable 1000 mm turning units -Faceplate with various recording profile perforations -Tailstock / recovery storage -Delay start bending / bending length twisting preselection - right - left rotation -Space requirement approx. B 1750 x H 1100 X 500 mm -Drive 400 V / 0,75 kW -Weight approx. 150 kg

We offer 18 pieces Peri Trio 330 x 240 elements refurbished. Newly covered with original Peri Finply formwork. Frame cleaned, primed and painted with zinc phosphate coating. 50% discount on the new value of 3683,00€ = 1841,50€/ piece. Offer only valid while stocks last, subject to prior sale! If you have any questions, please call 0049 176 70044689 Mr. Becker purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register court Ulm: HRA722943 VAT ID NO.: DE279047055

Detailed info: Aluminium format sliding carriage with hardened steel guide rods. Large solid work table made of grey cast iron. ø190 mm table opening with undercounter extraction. Electronic speed display. Milling stop ø250 mm. Built-in milling spindle lock. 4 speeds as standard. Milling spindle can be swiveled backwards. With integral stop 500 mm and telescopic stop 900 mm, extendable, with 2 stops and tensioners made in EU Technical data: 400V Spindle diameter 30 mm swiveling spindle 90°/45° Spindle height adjustment 175 mm Spindle clamping length 125 mm tool diameter 250 mm with optionally available tenon slot hood 320 mm Spindle speed 1400/3500/6000/8000 Weight 390 kg

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Manual nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 106kW DC variable speed motor. Very good condition.

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace

Qty. 1 Second-hand strip rolling mill plant Mfc.: Gautchi, Pechiney, Spidem, Stein Heurty SA, TECMO-HUNTER, ACHARD, WALDRICH Built: 1971, 1973, 1975 Modernisation in 1991 Strip width: 850 – 1600 mm Thickness Entry: 12 mm Exit: 0.3 mm Consist of: Qty. 2 Strip casting line 4-Hi rolling mill Qty. 2 Homogenisation furnaces Slitter Grinder Qty. 2 Coil cars

One unused rotary valve from Buhler, opening 275x250mm. Extra cone included, inside flange diameter 235mm.

Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm

Properties: Condition: fully functional, with traces of use Ideal for fast material transport Expertly dismantled and packed Manufacturer: Transnorm Type: 180 degree Year of construction: 2008 Condition: Used Total external width: approx. 1,850 mm Cjykcub7m3 Total width inside: approx. 1000 mm Web width: approx. 510 mm Belt width: approx. 310 mm Conveying width incl. side guide: approx. 290 mm Material: Aluminium/Steel Strap Type: Smooth Including SEW motor 0.55 KW Belt conveyor curve Due to the excellent workmanship of the belt conveyor curve, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to prepare your individual offer or advi ...

Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.

QTY 1 x Pomini VIC1.8-PX1.6 Tandem Lab mixer, Machine number 9912, date 1990, Modern frame design with unitized fabricated steel base, Anti friction roller bearings with floor lubrication, 22kW DC variable speed motor. Rotor speeds 0-230rpm Torque montioring sensors. Siemens PLC control system with S7-300 CPU (combined with original S5). Desktop computer interface. Left hand mixer: Pomini PX1.6 tangential rotor type, Volume 1.6Litre, 2 wing rotors, FY type bronze dust seals, Jacketed chamber for heating or cooling, Hard Chrome plated chamber and rotors, Chamber sides can manually swing open for cleaning/maintenance (by removing 4 bolts on each side), Pneumatic oil injector, Pneumatically operated discharge drop door with linear actuator, Pneumatically operated hopper load door, Pneumatic ram with transducers fitted to monitor floating weight position. Proporti ...

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible coupling, 2 x 68kW DC variable speed motors. Variable friction ratio/roll speeds. In very good condition.

FINLAY / TEREX 390 HydraScreen, screen / screening, Deutz engine, including additional belts, German Machine, 5.150 h, year 1996

BAVARIAN BREWERY TECHNOLOGY - 80HL BREWERY WITH TANKFARM YEAR 2009, UPGRADED 2020 FORMER DARK STAR UK BREWERY Alan Ruddock Complete Malt Milling System with Steels Masher Bavarian Brewery Techology Mash Mixer Bavarian Brewery Techology Lauter Tun Bavarian Brewery Techology Brew Kettle Bavarian Brewery Techology Whirlpool Scada Control System (2020) HLT Vessel 1 8500 Litre HLT Vessel 2 8500 Litre CLT Vessel 20,000 Litre Brewhouse Pumps, Flowmeters, Valves, Pipework TANK FARM 6x Bavarian Brewery Technology Stainless Steel Jacketed Conical Fermenter, 9,000 litre 4x Biomashin Stainless Steel Jacketed Conical Fermenter 9375 litre, 2011 4x Biomashin Stainless Steel Jacketed Dish bottom tank, 9200 litre, Year 2012 TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter Also 37 bbl, ...

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 138kW fixed speed motor. Fixed friction/roll speed. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible couplings, 2 x DC variable speed motors. Variable friction ratio and roll speed. In very good condition.