t k schneider used for sale

Removal system for lid to capsule 16-fold Abstract: The lids are removed from the open mold with the removal arm. The injected products are removed from the ejector side. On the removal arm, the presence of the parts is controlled. Once the unloading arm has reached its end position, the lid with a vertical servo axis into the waiting box, As soon as the box is full (counting the lids), the box is transported outside and the next empty box is pulled in. Specifications: Product Type: Round Lid Dimensions: DN 50 mm Height: 6 mm Number of cavities: 16 Cycle time of the IML system: 5 s

Rotary cultivator Pellenc Tournesol TS 1000 LD, three-point rear attachment, tool Rotary cultivator with 2 movable cutter blades on the boom (manual length adjustment approx. +/- 25 cm), hydraulic drive by means of 540 rpm push-on PTO pump, hydraulic lifting (1 x hydraulic connection ew required). Support and evasion function can be adjusted several times, solid sliding shoe (approx. 60 kg). Year of manufacture 2014, used. Manufacturer's specs: For tractors 50 hp, hydraulics 30-40 ltr. /min. at 180 bar, working speed max. 5 km/h, vine width min. 2.20 m.

Key data: 500 mm, 1640 mm, 4 St.

Martin T52 Surface Planer Brand Martin Type T52 Year of manufacture 1987 M. Nr V 151674 Motor power 5.5 kW (7.5 hp) Knife shaft speed 5000 rpm Knife shaft Z-4 Circle ø125 mm Planing width 500 mm Blade length 510 mm Spahn removal 8 mm foot pedal adjustment with display at table level Table length 2840 mm Task - Table length 1640 mm Acceptance - table length 1200 mm Table height 800 mm Dressing tank 1,100165mm Tilt 45° Weight approx. 950 KG Condition: Function tested

Key data: 500 mm, 1640 mm, 4 St.

Martin T52 Surface Planer Brand Martin Type T52 Year of manufacture: 1986 M. No V144098 Motor power 5.5 kW (7.5 hp) Knife shaft speed 5000 rpm Knife shaft Z-4 Tersa Circle ø125 mm Planing width 500 mm Blade length 510 mm Spahnabnahme Praxis 16 mm foot pedal adjustment with display at table level, limited to 8 mm for safety. Table length 2840 mm Task - Table length 1640 mm Acceptance - table length 1200 mm Table height 800 mm Dressing tank 1,100165mm Stop tilt 45° Weight approx. 950 KG Condition: Function tested

Name: FANUC Servo Motor Model OM Manufacturer: FANUC (Tokyo, Japan) Type: A06B-06 Country: Japan Short Description: Original FANUC servo motor model OM with integrated encoder.

Qty. 1 Second-hand slitter – still on foundation Mfc.: TBA Removed to new location: 2000 Stopped: 2022 Input coil characteristics: Strip thickness: 0.1 - 3.6 mm Cut strip width: max 600 mm Internal coil dia.: ø 290 - 650 mm Maxi. external coil dia.: 1100 mm Max. coil weight: 3000 kg Output coil characteristics: Internal coil dia.: ø 400 mm Number of strip cuts 7 times at thickness 3.5 mm Min. width of cut tape: 10 mm Tolerance of tape cutting width 0.2 mm

A screen printing system including a feed table with XY adjustment is available. Printing area: 800mm/500mm, max. print object height: 160mm, max. frame dimensions X/Y/Z: 1290mm/760mm/40mm, max. printing speed: 500 prints/h, machine dimensions X/Y/Z: approx. 1700mm/1100mm/2000mm, weight: approx. 450kg. Documentation available. An on-site inspection is possible.

roll diameter: 300 mm throat: 450 mm table height: 480 mm saw band length: 3350 mm width of saw-band: 10 mm total power requirement: 2,2 kW weight of the machine ca.: 520 Kg dimensions of the machine ca.: 1,00 x 0,70 x 1,85 m Saw for body parts made of sheet metal, plastic etc good accessibility of the saw blade, guided freehand. Cutting speed infinitely variable up to 1000 m/min Tape welding device IDEAL BS00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

15,000 liter sugar tank/storage tank Characteristics: volume 15000 L Total length 4300 mm Cylinder length 3350 mm Total height 3600 mm diameter 2500 mm material V2A (AISI 304) 1.4301 Outside surface marbled Surface inside 2B=IIIC ground Design Horizontal Number of feet 6 Description MJ UNI-HIGH Tank crown: Inflow 2 mushrooms 2 x Cathedral Digital level measurement Floor slope 3% In front: Cone bottom Manhole 420 x 360 mm with magnetic safety device 2 x line connections - front and rear CIP Residual drain with butterfly valve DN 100 Below: 6 trumpet feet with domes - height adjustable on steel supports

22,000 liter sugar tank/storage tank Characteristics: volume 22000 L Total length 5500 mm Cylinder length 4500 mm Total height 3500 mm diameter 2500 mm material V2A (AISI 304) 1.4301 Outside surface marbled Surface inside 2B=IIIC ground Design Horizontal Number of feet 8 Description MJ UNI-HIGH Tank crown: CIP Management 3 x Connections In front: 2 sight glasses Manhole 470 x 400 mm Circuit Below: Residual drain pipe with disc valve 8 trumpet feet with domes - height adjustable on steel supports

1,216 liter turbo stirrer for spray cream 2 pieces with mixing table Characteristics: Volume container 1 1216 liters Volume container 2 1216 liters material V2A (AISI 304) 1.4301 Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Total height 2700 mm Width 2000 mm length 6000 mm Number of feet 4 Description MJ UNI-HIGH Consists of 3 parts with pedestal Part 1/3 Mixing table Dimension: Length: 1,750 mm Width: 800 mm Height: 1,300 mm Part 2/3, 3/3 per container with a capacity of 1,216 liters Dimension: Total height: 2,700 mm Cylinder height: 1,250 mm Inner diameter: 1,150 mm Container description: Topsoil: Lid with 1/3 flap at the front and back with grid Propeller agitator Underbody: Residual drain pipe connected to line 4 fixed feet on each frame

3,800 liter rinsing milk tank/storage tank made of V2A Characteristics: volume 3800 L material V2A (AISI 304) 1.4301 Total height 2400 mm Cylinder height 1100 mm inner diameter 1850 mm Outside surface marbled Surface inside 2B=IIIC ground Design Vertical Number of feet 3 Description: MJ UNI-HIGH Topsoil: Flat floor with 3% slope threaded connector CIP ball Manhole Ø 540 mm vent nozzle Tank cylinder: 2 x Step Arches 2 x Disc Valve Underbody: Cone bottom drawn from outside to inside Residual Drain Pipe 3 solid feet

2,000 liter rinsing milk tank/storage tank made of V2A Characteristics: volume 2000 L material V2A (AISI 304) 1.4301 Total height 2400 mm Cylinder height 1100 mm inner diameter 1300 mm Outside diameter 1600 mm Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Design Vertical Insulation 150 mm Number of feet 3 Description: MJ UNI-HIGH Topsoil: Arched floor CIP ball Manhole Tank cylinder: 2 x connection Underbody: Inclined cone bottom forward-drawn residual drain pipe with disc valve 3 feet with domes - height adjustable

Afrolmachine 5 ton Middenhoogte: 1300 mm Spoellengte: max. 1100 mm Decoiler is verplaatsbaar, gemonteerd op chassis Laadwagen is vast gemonteerd op chassis

Amada Promecam ITPS 100 ton x 3100 mm CNC Capacity: 100 ton x 3100 mm Backgauge: CNC Control: EMA Passage between uprights: 2600 mm Max stroke: 105 mm Max distance between table -- ram: 370 mm Depth of throat: 400 mm Table width: 90 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 10 kW Length: 3640 mm Depth: 2210 mm Height: 2340 mm Weight: 6580 kg

Amada Promecam RG 50 ton x 2100 mm Capacity: 50 ton x 2100 mm Passage between uprights: 1690 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Table width: 60 mm Locking speed: 48 mm/sec Working speed: 10 mm/sec Returning speed: 70 mm/sec Electric motor (power): 7,5 HP Length: 2100 mm Depth: 1400 mm Height: 1850 mm Weight: 3 ton

Amada Promecam RG 50 ton x 2100 mm Capacity: 50 ton x 2100 mm Passage between uprights: 1690 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Table width: 60 mm Locking speed: 48 mm/sec Working speed: 14 mm/sec Returning speed: 70 mm/sec Electric motor (power): 7,5 HP Length: 2100 mm Depth: 1400 mm Height: 1850 mm Weight: 3 ton

complete MWM gas installations TBG620V16K 1350 KWe stamford alternator 1680 KVA

- 8 assen: Y1 / Y2 / X / R1 / R2 / Z1 / Z2 / V - nieuwe 2D Touch grafische besturing - zware achteraanslag - Amada-bomberingssysteem (V) - nieuw laserbeveiligingssysteem Machine kan gedemonteerd worden in onderdelen, kan in containers worden getransporteerd Capacity: 630 ton x 8100 mm Backgauge: heavy duty CNC Control: 2D Touch Passage between uprights: 7210 mm Max stroke: 350 mm Max distance between table -- ram: 650 mm Depth of throat: 400 mm Table width: 350 mm Locking speed: 70 mm/sec Working speed: 8 mm/sec Returning speed: 50 mm/sec Electric motor (power): 47 kW Power needed: 380V Length: 8300 mm Depth: 2600 mm Height: 4400 mm Weight: 90 ton

Key data: 45 °, 3300 mm, 1250 mm

Equipment: - Scoring saw unit - Trimming length 3300 mm - Cutting width 1250 mm, adjustable by handwheel, digitally displayed in control panel, width stop can be folded down - Cutting height and angle above hydr. Foot pedal adjustable, digitally displayed in control panel - Saw blade Ø 200-450 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt flip - Electrics: 380 V, 50 Hz, 3~, 13.0 A

Internal Device TACCHELLA 612 complete with spindle, dressing unit, Information about technical data are not binding., Machine available subject to prior sale.

Mettler Toledo weigh price labelling line, More info soon, dimensions in the photo album

Technical specification, TRM S1 TRM M1 TRM L1, FEATURE VALUE FEATURE VALUE FEATURE VALUE, POWER 15 KW POWER 30 KW POWER 45 KW, ROTOR DIAMETER 380 mm ROTOR DIAMETER 500 mm ROTOR DIAMETER 620 mm, LENGTH 1420mm LENGTH 1680mm LENGTH 1790mm, WIDTH 700mm WIDTH 820mm WIDTH 940mm, HEIGHT 700mm HEIGHT 920mm HEIGHT 1040mm, WEIGHT 660kg WEIGHT 870kg WEIGHT 1000kg, Turbo Mill, The TRM series of Turbo Mills is an advanced grinding system mainly used in the recycling of electronic boards and cables to effectively crush and grind these materials. Plastics, metals and other components contained in electronic boards and cables are crushed into fine particles and converted into recyclable raw materials thanks to this machine. With its high-speed rotors, the Turbo Mill carries out the grinding process and crushes materials to micron size through friction and impact forces.

vibrating screen, used, reconditioned, vibrating surface 1.400 x 480 mm., height from floor 900 mm., 2 ways out: 1st screen 8 mm Ø to separate clogs, 2nd for good material

for sale is a MIG -MAG welding machine from Ess Schweißtechnik Bad Waldsee, HV 8534, Subject to prior sale, changes and errors!

EWD - GILLET log bandsaw line with canter and double-cut, - Heavy duty log loading deck, - EWD hydraulic log carriage, type EW 1000, - GILLET canter, type SL, - GILLET bandsaw machine, type TO1600, - Outfeed conveyor, - Control unit with Mudata controller

saw blade diameter: 350 mm dimensions of saw-blade: 350 x 32 x 2,5 mm cutting diameter: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: rechts & links 110 mm capacity 45 degrees: square: rechts & links 95 mm capacity 45 degrees: flat: rechts & links 125 x 95 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 90 x 95 mm cutting speed: 15 - 90 m/min total power requirement: 2,5 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 1000 x 950 x 1800 mm -The powerful, 2-stage gear was specially designed for cuts in solid material designed -The user has a total of 4 blade speeds for optimal adjustment the material available -The large bearing rotary table with internal table clamping and Precision stops at 0/45/60° ensure quick adjustability miter cuts -The vice with qui ...

diameter: div. number: 36x tool adaptor: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 45 °, 3300 mm, 850 mm

Martin T72A sliding table saw with: hydraulic saw height and digital display at eye level Hydraulic saw blade swivel and digital display at eye level Handwheel adjustment of the cutting width and digital display at eye level Parallelogramtic for angular sections -46° to 46° and digital readout Scoring saw Brand MARTIN Type T72A Comfort Year of Make: 1999 Control panel eye level integrated in the extraction support (saw blade height, inclination, cutting width) Saw blade height adjustment: Hydraulic with digital display in the screen 0-170 mm Saw blade tilt: Hydraulic with digital display in the screen 0- 46° Parallel stop: handwheel adjustment with digital display in the screen Saw hood: Electric height adjustment of the hood Manual move to the right for oversize products to saw Landing table: Aluminium parallelogramtisch +/-46° miyt digital angle display Leng ...

Key data: 45 °, 3300 mm, 1250 mm

Martin T72A Sliding table saw with NC-controlled cutting width, electric blade height, inclination; Brand MARTIN Type T72A M-No.: V238101 Year of Make: 1997 YouTube: Control panel at eye level integrated in the extraction support Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Landing table: parallelogram cross table Length stop: Aluminium 2,200mm, extendable up to 3,200 mm with digital 2-point stops Main saw: ø450 mm, cutting height: 170 mm, saw swivel: 0° - 46° Speed control: 2800/4000/5500 rpm Motor: 5.5 KW Trolley: 3,300 mm Cutting width: 1,250 mm Extraction: Top: ø80 mm, Bottom: ø120 mm Weight: 1,600 KG

Key data: 45 °, 3300 mm, 1250 mm

Martin T72A Sliding table saw with NC-controlled cutting width, electric blade height, inclination; 3-axis electric scoring adjustment Brand MARTIN Type T72A Aut Year of Make: 1997 Control panel: At eye level in the extraction support, integrated with 3-axis NC control, electric saw hood, height adjustment and 3-axis scoring Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Saw hood: Electric height adjustment Landing table: Steel (galanized) with fixed detent points for mitre angles 0°, 22.5°, 30° and 45° or freely selectable intermediate interlocking angles Length stop: Aluminium 2,200mm, extendable up to 3,200 mm with 2 point stops Main saw: ø450 mm, cutting height: 170 mm, saw swivel: 0° - 46° Speed control: 2000/275 ...

Key data: 45 °, 3300 mm, 1250 mm

MARTIN T73 AUTOMATIC, parallelogramtic, driven trolley, 3-axis control Mark: MARTIN Type: T73 AUTOMATIC Year of Make: 2001 Table dimensions: 1,350 x 1500 mm. Cutting width: 1,350mm Edging table: 3,300mm Main saw: 7.5 kW Saw blade shaft: ø30 mm. with two drive pins Saw blade change: "ProLock" quick-change system Saw blades: Ø 250 - 500 mm; up to Ø 400 mm retractable under table; Cutting height: 170 mm. (Saw blades. 500 mm.) Saw blade swivel: 0 - 46° Scoring: Optional (Could be installed for € 1,750 surcharge) Cutting width: 1,350 mm Rip fence: Stop ruler in anodized aluminum; Final position; Automatically lowers below table level Length stop: Digital length stop made of anodized aluminum with Martin 2-point stops Control: NC control with LCD display of width, height and oblique angle, plus 2 digital length stops Screen: LCD control panel at eye level, swive ...

Key data: 45 °, 3300 mm, 1350 mm

.

Key data: 92 °, 3300 mm, 1350 mm

.

Offer 25228 Specifications: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, hydr material replenishment machine - Saw blade dimensions 4400 x 34 x 0.9 mm - Cutting speed infinitely adjustable 15 - 88 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 90 ° - at 90° around 360 mm - Square flat 360 x 430 mm - Hydr. Material Tension - Hydr Material Replenishment Machine - Coolant device - Drive 400 V / 3 kW - Space requirement approx. W 2200 x H 1850 x D 1300 mm - Weight approx. 1100 kg - Roller conveyor 2000 mm

TBI VC 1270 HH New Line CNC machining center was built in 2023 in Poland by TBI Technology Sp. z o.o.. This extremely efficient and reliable machine is the perfect choice for precision machining of workpieces with a maximum weight of 1500 kg. The work space, in relation to the machine’s compact dimensions, has been fully maximised in order to make the operations easier and completely free. It consists, among others, of a large work table and a body made of the highest quality grey cast iron, whose stability ensures maximum precision and repeatability of the produced parts. The very precisely balanced spindle, in turn, allows vibration-free operation at any speed. Its excellent temperature stabilisation also ensures that the temperature remains constant during even the most intense challenges. The spindle taper and tool changer are continuously purged with air to protect them from ch ...

Manufacturer:BIERREBI Model: TA103 Year of Manufacture: 2002 Type of Machine : Automatic cutting machine for knitted fabrics Condition : very little used Overlaying, marking, cutting, stacking, and counting. All these operations are now integrated into the TA103 automatic cutting system. The TA103 automatic cutter requires only one operator to position the garment pieces. All other tasks can be performed automatically with high precision and remarkable operational simplicity. With the TA103 automatic cutter, everything is simplified, faster, and more cost-effective. Bodies, sleeves, raglans, cardigans, polos, striped garments, solid colors, plaids, and marked garments can all be processed. The TA103 allows for precise and consistent cutting quality without the need for highly specialized labor. Machine production capacity: Produces up to 960 sleeves per hour Produces 90 to 150 ...

A Construzioni Macchine Legno s.r.l. multirip saw is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/rigid: 90mm/120mm, weight: approx. 3000kg. On-site inspection is possible.

Length: , mm Width: , mm Height: , mm Door painting trolley --------------- TLW 120: Price EUR 695.00 Painting trolley for doors incl. 2 pick-up forks - Door weight up to 120 kg - Door size max.2400x1200 mm Technical data Dimensions (min.) L x H x W 1330 mm x 910 mm x 610 mm Dimensions (max.) L x H x W 2600 mm x 910 mm x 610 mm Load capacity up to 120 kg Weight 24 kg --------------- TLW 200: Price EUR 985.00 Painting trolley for doors - Door weight up to 200 kg - Door size max.2800x1400 mm Technical data Dimensions (min.) L x H x W 1460 mm x 970 mm x 1100 mm Dimensions (max.) L x H x W 3360 mm x 970 mm x 1100 mm Load capacity up to 200 kg Weight 42 kg Extension set for TLW 200: Price EUR 190.00 for maximum door lengths up to 3600 mm --------------- Prices of the above-mentioned painting trolleys on request! plus packaging and shipping --------------- Further technical details as an attac ...

A centerless CNC cylindrical grinding machine Tschudin is available. Workpiece diameter min./max.: 1.5mm/100mm, max. grinding length: 250mm, grinding wheel diameter outside/inside: 400mm/203.2mm, grinding wheel peripheral speed: 50m/s, grinding wheel power: 11kW, control wheel diameter outside/inside: 225mm/127mm, speed: 265rpm, inclination: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Including Knoll Micro Pur 240 F ultra-fine filter, Streuli SHSRT300-TL142/180 lifting station and Kraft & Bauer FB703S-UV3-TFM70° fire extinguishing system. Documentation available. On-site inspection is possible.

Transnorm belt conveyor hinged belt diverter 3000x1120x1000 RA2286 Technical data: Conveyor length (NL): 3000 mm Belt body (NB): 1120 mm Belt width (GuB): 1000 mm Overall height/transfer height (BH): 1050 mm +100 mm adjustment range Minimum transfer height: 500 mm Maximum transfer height: 1600 mm Basic dimensions: 3000x1300 mm Tilt height difference: 1100 mm Conveying speed (v m/s): 1.5 m/s Lifting/lowering speed: 1.8 s /1.2 s Drive: Nord geared motor Electrical data: Conveyor belt motor: 50Hz V380-500, kW 1.5 / S1 Tilting motor: 50Hz V220/400, kW 3.0 / S1 Idler pulley (UR): Ø = 80/120 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Optionally available: Frequency converter for stepless speed control Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2020 condition: new Conveying length in mm: 3000 Nominal / outside w ...

The scope of delivery includes: 01x Depth web, used Material colour: RAL 5001 blue Total length: approx. 1,112 mm Inner length: approx. 1,103 mm f. Stand depth: approx. 1,100 mm Clear span: approx. 999 mm Profile dimensions: K 50 x 50 x 4 mm Truss support: approx. 53 mm Unit weight: approx. 2.52 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

diameter: div. number: 40x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 36x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 40x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schneidmaschine mit Rüttler - Guillotine with Jogger Wohlenberg 137 CUT-TEC Year 2002 - Serial-No. 3834-006 Schnittbreite / Cutting width max. 1370mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table große-Luft-Seitentische / large airbed side tables Lichtschranke / Light guards Ersatzmesser / Spare knives CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Schüttelautomat Rüttler mit Ausstreichwalze / Automatic Jogger with Press Rollers Baumann BSB 6 L Year 2003 - Serial-No. 211.917 Bogenformat / Sheet Size max. 1050 x 1450mm Lagenhöhe / Ream height max. 160mm

Zusammentragmaschine / Gatherer TMF N10

Zusammentragmaschine / Broschürenfertigung Theisen & Bonitz TB Sprint 315 VP - TB Sprint 303 Booklet Maker / Brochure Finishing Theisen & Bonitz TB Sprint 315 VP - TB Sprint 303 Zusammentragmaschine / Gatherer TB Sprint 310 VP - 15 Stations Feeder Baujahr / Year 1992 Format / Size min. 65 x 100mm Format / Size max. 350 x 500mm Broschürenfertigung / Booklet Maker TB Sprint 303 Baujahr / Year 1992 Heften-Falzen-Schneiden / Stitching-Folding-Trimmer Unit 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Kompressor / Compressor Becker Auslage / Delivery

1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Heidelberg GTO52+ Year 1992 - Serial-No. 706166 Size max. 320 x 460mm Impressions 37 Mio. Paperweight: 0.04 - 0.4 mms Speed: 3.000 - 8.000 sh/hr Dampening System VARN Compac Plus Version

Falzmaschine / Folding Machine MBO T500