130,466 used machines on RESALE, but how to find them? Machine Search
A small screen printing machine and a spray booth for print pre-treatment are available. 1) Screen printing machine (orange machine). 2) Spray booth SER.TEC. s.r.l. Cabina S / Apply Eco, year of manufacture: 2014. The system was only used for test purposes, as a print changeover took place. Documentation available. On-site inspection is possible.
Seven gearboxes are available. 1) Jahnel-Kestermann, Getriebewerke Bochum GmbH, type: 027.5-AW36/FG, power: 40kW. 2) Polysius GmbH, Neubeckum, year of manufacture: 1956, type: 027.5 / AW36, power: 33hp, speeds: 542/14.5. 3) Polysius GmbH, Neubeckum, year of manufacture: 1964, type: GR36, power: 35hp, speeds: 555/15. 4) TGW Thyssen Getriebe und Kupplungswerke GmbH, type: KS 1.5, year of manufacture: 1990, power: PN 5.7kW. 5) WGW Westdeutsche Getriebewerke GmbH, type: N 6.7, characteristic values: n/n1 14-50/12.5, KB 2.5. 6) WGW Westdeutsche Getriebewerke GmbH, power: 45hp, characteristic values: n/n1 315/15, KBU 1245ISO. 7) Polysius GmbH, Neubeckum, year of manufacture: 1953, type: 027.5 / AW36, power: 42/34 hp, speeds: 600/16, 135/13. On-site inspection is possible.
Production capacity: 2x120kg, inlet connection (liquid phase): 22mm/RWS22, outlet connection (gas phase): DN50 PN25, optional (unregulated gas phase): RWS28, vent line (safety release): RWS22, separator drain: RWS12, connected load: 40kW, output: 3000kWh. Machine dimensions X/Y/Z: approx. 1900mm/1600mm/400mm. Documentation available. On-site inspection is possible. The machine is unused and still in its original packaging.
A dissolver basket mill combination machine VMA Getzmann is available. Connected load: 25kVA, flour chamber volume: 4l, container volume range: 75l-750l, product volume range: 50l-400l. The ceramic insert of the flour basket is defective and must be replaced. On-site inspection is possible.
Five Rietschle vacuum pumps including vacuum pump stands, switch cabinet and accessories are available. 1-2) Dry-running screw vacuum pump Rietschle Twister VSB 120, year of manufacture: 2006, intended use: continuous distillation, suction pressure: approx. 100mbar, back pressure: atmosphere, pumping speed: approx. 60m³/h, max. suction temperature: 60°C. 3-5) Three further vacuum pumps, year of manufacture: 2003. The pumps are controlled via a joint control cabinet. Documentation available. On-site inspection is possible.
For high-performance applications with temperature-sensitive samples, with pre-cooling function, direct button and CFC-free cooling system. Temperature range: -10 to 40°C, connected load: 1950W, dimensions: 670x745x790mm, net weight: 142.5kg. Including 4x oval 1l bottles, 4x adapters for 15ml tubes, 4x white adapters and bottles, castors, rotor cross TX-1000 and set of 4 metal beakers TX-10000, with instructions for use and appliance test book, no maintenance or repairs, in good condition, little used. On-site inspection is possible.
An automatic Lorch welding machine including vacuum pump and traverse is available. Current: 230V, power: 100W, min. material thickness: 5mm, vertical/horizontal pulling force: 150N/350N, vertical/horizontal speed: 1100mm/min/1200mm/min, machine dimensions X/Y/Z: approx. 450mm/670mm/370mm, weight: approx. 25kg. Documentation available. On-site inspection is possible.
Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible.
Several roller conveyors are available for washing baskets that were set up in a low-dust production area. Wash basket width: 500mm. Single pieces without drive. Including swivel table. The roller conveyors are ready for collection.
A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.
A Tiger cassette lifting beam is available. Pick-up width: 2090mm, load capacity: 2500kg, machine dimensions X/Y/Z: approx. 800mm/700mm/650mm, weight: approx. 250kg. Documentation available. On-site inspection is possible.
Many different plug-in shelving components (support frames and shelf supports) are available. 65x BITO P2 27/10 support frames, year of manufacture: 2010, dimensions X/Y: 1100mm/3500mm. 42x profile shelf supports BITO PT95L-2.700, year of manufacture: 2010, dimensions X: 2700mm. 28x profile shelf supports BITO PT95L-1.800, year of manufacture: 2010, dimensions X: 1800mm. 108x profile shelf supports BITO PT120M-3.600, year of construction: 2010, dimensions X: 3600mm. 18x Röchling TC 304 support frames, dimensions X/Y: 1100mm/2050mm. 112x Röchling INP 100 profile shelf supports, dimensions X: 3300mm. 28x Röchling TC 304 support frames, dimensions X/Y: 1100mm/3150mm.
A total of 24 silos are available. 2x silo, diameter: 3000mm, height: 9500mm, usable volume: 50m³. 2x silo, diameter: 3000mm, height: 9500mm, usable volume: 65m³. 8x silo, diameter: 3000mm, height: 10500mm, usable volume: 65m³. 1x silo, diameter: 3000mm, height: 10500mm, usable volume: 50m³. 1x silo, diameter: 3000mm, height: 10500mm, usable volume: 35m³. 3x silo, diameter: 3000mm, height: 6500mm, usable volume: 40m³. 1x silo, diameter: 2865mm, height: 6500mm, usable volume: 33m³. 2x silo, diameter: 2400mm, height: 6550mm, usable volume: 27.5m³. 1x silo, diameter: 3500mm, height: 10000mm, usable volume: 90m³. 2x silo, diameter: 3200mm, height: 9300mm, usable volume: 65m³. 1x silo, diameter: 4500mm, height: 10500mm, usable volume: 120m³. Documentation available. On-site inspection is possible.
Two fully functional Schmiedl column-mounted slewing cranes are available. 1) Schmiedl crane type 3, year of construction: 1993, load capacity: 1000kg, radius: 5000mm. 2) Schmiedl crane type 3, year of manufacture: 1992, load capacity: 1000kg, radius: 7000mm. On-site inspection is possible.
saw blade diameter: 275 - 315 mm cutting diameter: 80 - 102 mm stroke: - mm total power requirement: 2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,5 x 1, 5 x 2 m No. 5230 Cold circular saw with additional gearbox for 4 speeds EISELE VMS II - S - PV ( Typ-Nr. 421 ) Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + fence) Weight approx. 400 kg Working range: Ø 80-102 /flat 160x75/82 Drive: 1,4/1,9 Feed - roller conveyor approx. 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t table length: 670 mm table width: 570 mm total power requirement: 8 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 2 x 2 x 3 m No. 2886 Spotting press 200 kN RICE TUS 60 OK 20 Stroke approx. 700 Drive: 7,5 kW Hydraulic control Extendable table 670 x 570 mm, Swivel-out top plate 670 x 570 mm, Installation height 740 mm Clearance between the columns 620 mm, Space requirement L/W/H 1870 x 1620 x 3000 mm, Weight approx. 3.5 to. Asking price: 8.500,-- ex works / EXW Asking price: 12.900,-- EXW warehouse loaded free on suitable truck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t table length: 1280 mm table width: 900 mm total power requirement: 7 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3 x 2 x 3,6 m m No. 5282 Spotting press 400 kN REIS TUS 90 OK 40 Working area: table 900 x 1280 Column passage 930 x 705 mm Table top 900 x 1280 mm ram plate 900 x 1200 mm Installation height 1035 mm Space requirement approx. 3 x 2 x 3.6 m Transport dimensions approx. 4 loading meters, width 2.20 / height 2.80 Weight approx. 8 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 5200 mm grinding width: 1300 mm workpiece height: 320 mm Control: Siemens 840 D main drive: 306 kW total power requirement: 380 kW weight of the machine ca.: t dimensions of the machine ca.: 11,21 x 3,2 x 3,85 m CNC production surface grinding machine with segment head Grinding length 5200 mm Grinding width 1300 mm Workpiece height 320 mm Control Siemens 840 D Passage width 1300 mm Grinding height 320 mm Grinding motor 306 kW Grinding motor speeds up to 320 rpm Grinding motor feed, infinitely variable 0.5-35 m/min Grinding motor infeed in steps of 0.002-1 mm Grinding motor infeed continuously stepless upto 5 mm/min Space requirement approx. 11.21 x 3.2 x 3.85 m Including accessories. - Coolant system - Magnetic clamping device - Switch cabinet - Oil mist extraction - Documentation Dimensions (length x width x height): Bed: 11200 x 2400 x 1600 mm, weight 28000 kg Grindin ...
pressure: 200 t table surface area: 2100 x 1400 mm passage width: 2122 mm total power requirement: 60 kW weight of the machine ca.: 35 t dimensions of the machine ca.: m Press/punch with injection molding unit 200 ton punch upstroke press with injection molding machine (400to) Additional guard locking via 4 power strokes Manufacturer: R+S Technik Year of construction: 2013 / rebuild 2016 Mains voltage/frequency: 400V/50Hz 3~(N/PE Connected load: 60KW Weight about 35000kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 700 mm turning length: 1250 mm control: TX8_i total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: 6,0 x 2,5 x 2,2 m CNC control TX8_i 9 CNC axes (X1, X2, Z1, Z2, Y1, B1, B2, C1, C2) Software functions: Tool life monitoring, Polyform, 3D-Helical IP, synchronous threads without L compensation, WOP Traub Win_Flex IPS incl. Mouse, MAIN SPINDLE (direct drive, adjustable hollow shaft motor) Spindle connection A-11 > DIN 55026/ 55021 Alignment and switching device Hollow clamping cylinder > spindle passage max. 102 mm speed max. 3,000 rpm Front bearing dm170 mm Drive power 100/40% ED 53 / 68 kW, torque 675 / 900 Nm C-axis resolution 0.001 ° Spindle locking for extreme roughing work 2.5 ° Counter spindle (direct drive, adjustable hollow shaft motor) Spindle connection A-11 > DIN 55026/ 55021 Alignment and switching device Full clamping c ...
grinding length: 4200 mm grinding width: 1300 mm workpiece height: 550 mm Control: SIEMENS 840 D magnetic clamping plate: 4200 x 1300 mm segment head diameter: 1400 mm grinding motor turning speeds up to: 320 U/min. grinding motor: 306 kW weight of the machine ca.: 50,0 t dimensions of the machine ca.: m Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: CNC-control SIEMENS Sinumerik 840 D Automatic hydr. swivelling of the grinding motor from hollow to cross grinding NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. Dresser ...
saw blade diameter: 350 mm dimensions of saw-blade: 350 x 32 x 2,5 mm cutting diameter: 115 mm stroke: 100 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: rechts & links 110 mm capacity 45 degrees: square: rechts & links 95 mm capacity 45 degrees: flat: rechts & links 125 x 95 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 90 x 95 mm cutting speed: 15 - 90 m/min total power requirement: 2,6 kW weight of the machine ca.: 375 kg dimensions of the machine ca.: 1000 x 950 x 1800 mm -The powerful, 2-stage gear was specially designed for cuts in solid material designed -The user has a total of 4 blade speeds for optimal adjustment the material available -The large bearing rotary table with internal table clamping and Precision stops at 0/45/60° ensure quick adjustability miter cuts -Th ...
turning diameter: 420 mm turning length: 1500 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 590 mm centre height: 210 mm Turning length in the bed bridge: 260 mm reus: 16 (45-1800) U/min tail stock: MK 4 quill stroke: 120 mm diameter of quill: 50 mm spindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mm spindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/min feed: plan 17 / 0,025 - 0,85 m/min total power requirement: 4,6 kW weight of the machine ca.: 1340 kg dimensions of the machine ca.: 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range ...
: 1860 m³/h : Pressung 2.900 Pa : 1,1 kW filter surface area: 10 m² : 72 dB(A) : 400/50 V/Hz : 665 x 1100 x 1495 mm : 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system --------------------------------------- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class W3 (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good clean ...
sheet width: 1015 mm plate length: 1015 mm plate thickness: 6,0 mm Punching capacity: 25 t punch diameter: 88,9 mm total power requirement: 16 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: 4000 x 2320 x 2300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 28 mm throat: 250 mm bore stroke: 130 mm morse taper: 3 MK table:: 380 x 380 mm turning speeds: 75 - 3000 U/min engine output: 1,1 kW column diameter: 98 mm thread: M16 ST60 dimensions: 700 x 450 x 1500 mm weight: 200 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t stroke: 400 mm table surface area: Arbeitsbreite 1300 mm pressure: 243 bar oil volume: 64 dm³ ajustment speed: 5,73 mm/sec work speed: 1,84 mm/sec return speed: 7,08 mm/sec total power requirement: 3,0 kW weight of the machine ca.: 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5000 kg workpiece diameter: 250 - 2500 mm total power requirement: 0,75 kW table turning speeds: 100 - 1000 mm/min diameter of running wheel: 250 x 140 mm weight of the machine ca.: 800 kg range L-W-H: 2200 x 2500 x 800 mm - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm bending angle: 0 - 180 ° gas tube pipelines: 2 (60.,3mm) mm speed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kW weight of the machine ca.: 0,7 t - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 400 mm centre height: 195 mm turning diameter over slide rest: 246 mm turning length: 650 mm spindle turning speed - stepless: 0-2500 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1.3x1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 850 mm y-travel: 500 mm z-travel: 450 mm table-size: 1250x500 mm spindle taper ISO: 50 spindle turning speed range: 35,5-1800 U/min weight of the machine ca.: 5.2 t HEIDENHAIN TNC-355 Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
koop: Tuchenhagen Mixproof Valve 4'' Manifold GEA Order number: 7100.14 Voor meer informatie kunt u bellen of een e-mail sturen. Phone: 06-20758459 E-mail: wh.derikxgmail De prijs is exclusief 21% BTW.
core drilling diameter max.: 16 mm bore depth: 485 mm swing diameter: x mm table-size: 590x350 mm spindle turning speed range: 230-2300 U/min weight of the machine ca.: 0.4 t Table with digital read out Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: Manufacture: FANUC 18i-MB x-travel: 510 mm y-travel: 360 mm z-travel: 300 mm table surface area: 600 x 360 mm spindle turning speed - stepless: 12000 U/min dimensions of the machine ca.: 1400 x 2300 x 2300 mmxmmxmm weight of the machine ca.: 2.6 t tool piece magazine with: 24 Plätzen tool piece magazine with: 20 Plätzen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
center hole: 2-50 mm workpiece diameter: 8-125 mm workpiece length - min.: 50 mm workpiece length - max.: 1000 mm column - center height: 145 mm grinding wheel speeds:: number: 3 from/to: 13000-45000 U/min spindle turning speed range: 400 U/min dimensions of the machine ca.: 750x850x1800 mm weight of the machine ca.: 475 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 200 mm turning length: 635 mm control: SIEMENS 840D Powerline greates pass round over bed: 250 mm spindle turning speed range: 20-7000 U/min turret head: 2x 12 weight of the machine ca.: 10 t Y- & B- axes Misc. accessories more details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stainless steel bar belt for Technopool spiral cooler Length (linear metres): approx. 260 - 280 m Total width: 900 mm Working width: 760 mm Distance between rods: 30 mm Availability: as of now
Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW
Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition
bar material dia.: 5 - 65 mm Bar length: 3000 mm feed length: max. 3000 mm voltage: 400 V weight of the machine ca.: 1,2 t dimensions of the machine ca.: 5,32 x 0,95 x 1,52 m serial-no.: 32 - 201 588 Loading magazine with lower storage area from which the bars are lifted into the Feed tube can be lifted Rod diameter 5 - 65 mm Feed force infinitely variable max. 550N Insertion speed 335 mm/sec feed speed 335 mm/sec Return speed 335 mm/sec Loading time for 3000 mm bars: 30 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Upstroke press Top lid can tilt open to allow mould to be (un)loaded Capacity: 150 ton Passage between uprights: 1850 mm Max ram adjustment: 500 mm Distance between table -- ram: 1000 mm Table area: 1800 x 1300 mm Height: 2350 mm
Spindle diameter 135 mm Morse 6 Attachment Cone Max. drilling depth in 1 pass 600 mm Min. distance spindle-column axis 485 mm Max. distance between spindle and mast axis 3,500 mm Min. distance from spindle to table 520 mm Max. distance from spindle to table 1,845 Min distance from spindle to plate - base 1,130 mm Max. distance from spindle to plate - base 2,455 mm Min drilling radius from column axis 820 mm Max. drilling radius from column axis 3,875 mm Max. drilling diameter 78 mm stroke 8,000mm stolle top 10.000X2.500mm
Paxman - 12RPHCZ MK 7 Turbocharger Holset Model 6 Completely overhauled Unit price! 2 pieces available !
Manufacturer: Bosch Model: TFC 5532 Year of Manufacture: 2016 Cups: 4 x 50g, 6 x 50g Designation: Forming Machine Technical Specification Bottom Foil Sterilization: Saturated Steam Top Foil Sterilization: Saturated Steam Bottom Foils: PS, PS-EVOH-PS, PS-EVOH-PE, PS Mono-Laminate foil, transparent and multicolored 1.05 mm Top Foils: Pet-Alu-Pet, 9-12-9 µm Filler 1: Viscous products without particles Filling range: 20 - 75 ml Filler 2: Liquid products without particles, hot filling 30-60°C Filling range: 20 - 75 ml Sorting Filler 1: Yogurt two-colored; pudding single-colored or with swirl/marble design Sorting Filler 2: Pudding or jelly single-colored Performance: 4 x 50g: 28 cycles equals 40,320 cups / h Punching: 4-set and 6-set punching --------------------------------------------------------------- Important Control Functions Cup Printing: Laser (not ...
Two similar Stanley riveting punches are available. Both machines include rivet dispensers ERF 23 and 23.1. An on-site inspection is possible.
Hot runner controller - Mastip TC5 100-12-H-DHB-C-03 Year of manufacture: 2018 Description: 12 hot zones with wiring All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Used dissolver made by Teja, type: MW-4. The MW-4 type dissolver, is used in the paint and varnish industry to mix pigment pastes in typical transfer vats with a capacity of 250 to 1000 dm3.
Used PP twine production line made by Roblon, type: T5000. Capacity ranges from 60 to 100 kg/h depending on twine thickness. THE LINE INCLUDES: - A 90mm diameter extruder with an inverter-controlled asynchronous motor, - A control cabinet with digital controllers, - A cast-in die head, - A longitudinal orientation oven for polypropylene rafi, - A single-reel winder, - A twister for winding finished twine balls, - A heating tunnel for shrinking the film on finished balls.
Fully automatic powder filling system, triple auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pnematics, HBM weighing sensor (Germany). 2 packaging modes: High speed or High Accuracy. Specifications: stainless steel (SS304) version | filling range: 10-500g | accuracy: +/- 0.3-1% (high speed mode), +/-1-2g (high accuracy mode) | suitable for: metal cans, glass bottles, plastic jar, cardboard cups, etc. | container dimensions: diameter 40-130, heig ...
Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). Twin version for faster output due to 2 complete production lines in one machine. The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | servo driven sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 902=180 cycles/min | bag sizes: L(40-300)xW(60-180)mm, (double film pulling possible for longer bags) | suitable film width: 140-380mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 3.9kW | air pressure: 0.4-0.8MPa | compressed air con ...
maximum number of results exceeded
please refine your search
