131,119 used machines on RESALE, but how to find them? Machine Search
Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 14000; Gross weight [kg]: 14000; Engine: 4016 TWG2; Accessories: Product features:, Drip-tray, Exhaust system
Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1823; Gross weight [kg]: 1823; Engine: F34.TEVP01; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 450
Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1823; Gross weight [kg]: 1823; Engine: F34.TEVP02; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 450
Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1823; Gross weight [kg]: 1823; Engine: F34.TEVP01; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 450
Chiller, chiller make AxAir, 180 Kw, R410A, with 4 compressor
Labeling Machine Manufacturer: SES Type SES-107 TTF Year of manufacture 2003 2-sided carton labeller including thermal transfer printer (1x top, 1x side) 2x SES 107TTF installed on the left side max. label width 116 mm Min. label width Label width 25 mm Min. label height Label height 15 mm Print width 106.6 mm, max. print height 1,500 mm Printing speed 300 mm/sec, labeling speed 0-18 m/min Conveyor belt length 1500 mm x 280 mm width Housing, control Siemens PLC S 7
Size: 650 mm Equipments: Shrink-wrapping machine with side sealing Function modefully automatic Product applicationsPaper, for packaging machines, for tape strips, stacks Further propertieswith side sealing, inline, foils Capacity 60 p/min Width 500 mm(19.7 in) Length 450 mm(17.7 in)
Transnorm conveyor belt GF 2100-400-300 RA2405 Technical data: Make: Transnorm Model: TS 6565 motor-driven belt diverter D=65mm Conveyor length (NL): 2100 mm Frame width (NB): 400 mm, 600 mm with motor Belt width (GuB): 300 mm Overall height (BH): 200 mm Support feet: optionally available Conveyor speed (v m/s): 2.0 Drive: Nord Electrical data: 50Hz V380-500, kW 1.1 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 condition: Ausstellungsstück Conveying length in mm: 2100 Nominal / outside width in mm: 400 Belt width in mm: 300 Driven: YES Engine type: Nord KW: 1,1/S1 Conveyor speed m / s: 2 scope of delivery: without supports and side guides For indi ...
Roll wrapping and settling Trima BA1000 - Manufacturer: Trima Triebeser Maschinenbau GmbH - Type: BA 1000 - Year of construction: 2014 - Voltage: 400 Volt / 50Hz - Fuse: 16A - Power: 1.9 kW - Weight: 680kg - External dimensions approx. 220x105x215cm WxDxH
3 Pieces Container Units with Diesel Engine Engine Type: Perkins 4016-61 TRG2 Year: 2023 Hours: 2 Power: 2000 kVA Cooling: Water, Radiator Speed: 1500 1/min Tank: approx. 2000 litres Generator: Stamford HVSI804R Voltage: 10 kV, 50 Hz Excellent condition, like new! Was used as an emergency power system. Subject to prior sale - errors possible! Internal reference number: E-1004-97
: 3 : 900 mm centre distance: 2x 4mm mm Distance between centres: 1x 5 mm mm capacity: 600 kp : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece weight per basket: 250 kg basket dimensions: max. mm voltage: pneumatisch weight of the machine ca.: 400 kg dimensions of the machine ca.: 1,35 x 1,50 x 2,35 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer Peri Trio formwork accessories, used Balancing latch TAR 85, 65% discount on new price for 68,08EUR net 405 x Balancing Bolt TAR 85 a 68,08EUR You are bidding on 1 piece Prices are excl. VAT and transport Subject to sale If you have any questions, please contact Mr. Becker at 0176-700 44689 Purchase and sale of scaffolding, formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office warehouse address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055
WEMTECH Dynamic Torch 150/300 plasma cutting machine was built in 2022 in Poland by WEMTECH CNC. The machine, designed for precision machining of workpieces, is distinguished by the use of modern technical solutions that guarantee excellent production performance for many years of use. The machining process is performed on a table with a large cutting area which is filled with water or other coolant. The use of this solution eliminates the need to undertake any further secondary processes, such as grinding. The work table also has sectional exhaust extraction. The individual sections of the extraction table are controlled by pneumatic cylinders. The axes are driven by a stepper motor with a gear wheel mounted on a cushioned sled. This drive effectively eliminates backlash, as well as ensuring the achievement of high acceleration and working speed. The plasma torch, on the other hand, ...
Manufacturer: MWM Model: TCG 2016 V8 C CHP unit 1 Operating Hours: 22,057 h CHP unit 2 Operating Hours: 9,112 h In addition to the two units themselves, the sale also includes exhaust gas heat exchangers, engine and auxiliary drive control systems, visualization, and a comprehensive spare parts package. Performance Data (Biogas, 50 Hz) - Electrical Output: 400 kWₑ - Voltage / Frequency: 400 V / 50 Hz - Speed: 1500 rpm - Generator: Marelli MJB 355 MB4 - Motor Management System: TEM EVO Efficiency - Electrical Efficiency: 38.0 – 46.4% - Thermal Efficiency: 40.4 – 43.6% - Total Efficiency: Up to 84.4% Engine Configuration - Type: V8 - Bore / Stroke / Displacement: 132 mm / 160 mm / 17.5 liters - Fuel Type: Biogas Heat Recovery (±8%) - Cooling Water Heat: 2080 kW - Mixture Cooler Heat: 5340 kW - Oil Heat: 12000 kW - Exhaust Heat (at cooling): 1136 kW - Radiant Heat (Engine ...
Size: 520 x 740 mm Equipments: suitable for Heidelberg, Komori, KBA, Manroland, Ryobi, Sakurai as is Easy installation and removal
used
Beyeler RH 100 ton x 3100 mm Capacity: 100 ton x 3100 mm Backgauge: manual Passage between uprights: 2630 mm Max stroke: 215 mm Max distance between table -- ram: 410 mm Depth of throat: 255 mm Locking speed: 100 mm/sec Working speed: 6,5 mm/sec Electric motor (power): 5,5 kW Length: 3300 mm Depth: 1550 mm Height: 2450 mm Weight: 7 ton
Elma Troyan motor Type: T 100LA 8/4 CB B14F 130-481 380 volt 0,7/1,1 kW 700/1415 rpm
Type: T 132H 4B 220/380V 7,5 kW 1445 rpm
Type: AEEEF-PP008 5,5 kW 50 hz - 380V - 12,3 amp 1450 rpm 59 kg
LVD PPBL 200 ton x 4100 mm Capacity: 200 ton x 4100 mm Backgauge: manual Passage between uprights: 3150 mm Max stroke: 150 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 6,5 mm/sec Returning speed: 65 mm/sec Electric motor (power): 11 kW Weight: 13,4 ton
Manufacturer: Thermo Model: HeraSafe KS Year of Manufacture: 2017 Find more here - / Contact us at -
spindle diameter: 130 mm x-travel: 4000 mm y-travel: 3000 mm z-travel: 2000 mm w-axis: 800 mm table:: 1800 x 2500 table load: 20 t feed range: 4 - 5000 mm/min spindle turning speed range: 10 - 3000 U/min spindle taper ISO: 50 spindle motor: 37 kW rapid traverse: 10 m/min Control: Heidenhain iTNC 530 total power requirement: 70 kW weight: 39 t range L-W-H: 8,5 x 8,6 x 5,5 mm equipped with - CNC control Heidenhein iTNC 530 & handwheel - 60-fold tool changer (ISO 50) - NC rotary table 1800 x 2500mm, 20t - IKZ and external coolant supply 20bar - chip conveyor - spindle support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
fully functional diesel emergency generator. We tested the functionality 2 times a year.
Used dough weigher Rheon VX212 Twin Divider from 2009 optionally with belt table including frequency controller for sale. The machine is visually and technically in good condition and can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. The Rheon dough divider weigher can optionally be offered as a completely overhauled version. - Year of construction 2009 - 800 kg per hour - Accurate dough weighing - With digital control panel - with program memory - Machine is checked and cleaned - Trade-in and delivery on request - Machine can be inspected in our warehouse and be tested
Semi-automatic with rotary table Max. Tool dimensions 300 x 500 mm Max. Tool height 120 mm Max. output 16 cycles/min Moulding and sealing possible with one tool Temperature for forming and sealing plate can be set differently Two-hand operation 1 tool set available PLC Omron SYSMAC CPM1 Touch panel Mobile Drive 400V/50Hz
Semi-automatic with rotary table Max. tool dimensions 200 x 400 mm Max. tool height 120 mm Output max. 16 cycles/min Forming and sealing possible with one tool Temperature for forming and sealing plate can be set differently Two-handed operation Without tool set Drive 230V/50Hz
Semi-automatic machine with rotary table Max. Tool dimensions 300 x 500 mm Max. tool height 120 mm Max. output 16 cycles/min Moulding and sealing possible with one tool Temperature can be set differently for moulding and sealing plate Two-hand operation Without tool set Drive 230V/50Hz Incl. an additional Universal 500 FS deep-drawing/sealing machine as a spare parts carrier
Semi-automatic machine with rotary table Max. tool dimensions 200 x 400 mm Max. tool height 120 mm Max. output 16 cycles/min Moulding and sealing possible with one tool Temperature can be set differently for moulding and sealing plate Two-hand operation Without tool set Drive 230V/50Hz
Key data: 1364 KW, 400 V
For Sale: MWM TCG 2020 V16 – 1,364 kW – Year 2007 – Zero Operating Hours We are offering a like-new MWM TCG 2020 V16 gas engine, with zero operating hours, manufactured in 2007. This engine has never been used and is available for immediate deployment. Key Specifications: Model: MWM TCG 2020 V16 Power Output: 1,364 kW Year of Manufacture: 2007 Operating Hours: 0 (unused) Included Scope of Supply: Cooling table Oil tank Circuit breaker Control panel Gas train
1 A+F butter carton packaging machine for 10 to 30 g parcels Capacity: 30,000 parcels/h packed in outer cartons Masch. Item No. 98097-A but without butter molding machine, is defective
2 almost identical, mobile loading bridges from 1.45 m to 0 Manufacturer Fa Butt, Factory No, 80110001281 A Year of construction 2010 Load capacity 7,000 kg
The THERMOLIFT 100-2 from ARBURG offers the possibility of drying and feeding a wide range of plastics with just one system. The THERMOLIFT is easy to operate thanks to its compact, modular concept and small size. All programming steps can be integrated into the machine control system. With a capacity of 100 l, you can feed up to two machines. A suction system enables the automatic filling of your THERMOLIFT. Please also note our large selection of other used plastic processing machines. All our machines can be viewed on site via video and tested in person.
Evaporator Thermofin -Type: TEN 050.1-E-2-7 -Cooling capacity: 18.6 kW at DT8, 14.7 kW at DT7 -Fin spinning: 7 mm -Fans: 2 x 500 mm -Dimensions: 2450 x 660 x 670 mm -Volume: 28.2 L -Weight: 134 kg -Quantity in stock: 6 -Reference number: CH 551 -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work
Make: Tos Machine No: F641 Type SPEEDtec CNC brand Siemens CNC type Sinumerik 840D Year of construction 2009 X 1,250 mm Y 1,000 mm Z 600 mm Mounting HSK 100 Motor power 25 kW Speed 12000 RPM Tool Changer Number of pallets 4 Outgoing Aries Including manuals Maximum speed 12,000 RPM Maximum pallet load 4,000 kg Chip transport Magazine slots: 2x 40 , HSK 100 4 tables, 1x 1,000 x 1,250mm / 3x 1,000 x 1,000mm
LVD PPS-TS 100 ton x 3100 mm CNC Capacity: 100 ton x 3100 mm Backgauge: CNC Control: Cadman Express Passage between uprights: 2550 mm Max stroke: 150 mm Max distance between table -- ram: 350 mm Depth of throat: 250 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 16 kW
Inv. Num. : 8398 Type: OFA 71A Producer: TOS Generated: Parameters: Maximum module: 10 mm Maximum gear diameter: 710 mm Maximum table load: 1000 kg Number of teeth of bevel gear: 8-400 Machine height: 2400 mm Machine length: 3900 mm Machine width: 2600 mm Machine weight: 13500 kg Equipment: Set of interchangeable wheels Conveyor
Fuho Type 1408 Metal Band Saw Vertical band saw Passage width 350mm Saw blade device Motor 1kW 400V 50Hz Scissors for saw blades Table can be swivelled transversely and longitudinally Saw blade guide at the top and bottom Band length 2362mm G&2996-M40GH
The scope of delivery includes: 01x Depth web, used Material Color: Raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm f. Stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 100 x 50 x 4 mm Truss support: approx. 52 mm Unit weight: approx. 5.42 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Food Tools CS4AAC round cake slicer Serial: 5253 2015, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with three cutting inserts and spare blade, mobile
Food Tools CS1000CE Automatic round cake cutter Serial; 3190 This cake slicer is capable of cutting a variety of frozen round products including cheesecakes, layer cakes, ice cream cakes, pies and more. The machine is best for bakeries producing 200 or more products per hour
Process cooling tower, air-cooled, Type: Cooling tower RAD 864/900 Cooling Tower, MTA S.p.A. - Rehsler RAD are compact water cooling towers that are suitable for outdoor installation. Including pump, water treatment for biocide and stabilizer and control and control cabinet. Cooling capacity kW 1113 Cold water temp. Exit/ Entry °C: 27 / 32 Volume flow m³/h: 192 Available Pump Pressure Bar: 3.27 Wet bulb temperature °C: 21, Air volume m³/h: 97200 Sound pressure in 10m free field dB(A): 64 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. current consumption (A) 125 Max. power consumption (kW) 86.6 Dimensions: Length mm 6600, width mm 2424, height mm 3180, Weight transport / operation kg: 4194 / 8449 Connection DN 150 FROM 9038 Year of construction 2020 Condition: Optical 1, Technical OK Test facility, as good as new Price: on reque ...
Punching capacity: 220 kN plate thickness: 8 mm working area: 2535x1280 mm sheet thickness for stainless steel: 4-6 mm Accessories: -Setup cassettes -Table with ball rollers Youtube video link: https://www.youtube.com/watch?v=1RlPrkZPN0Y&ab_channel=BaestleinGmbH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 2,200 mm Depth: 800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Measuring head (CMM) rigid probe RENISHAW type PH5 + TP20 + PEL1-50Probe for measuring machineSerial: 77501 - Push button holder probe body TP20 for interchangeable modules (probe modules)Extension - type PEL 1, length 50 mmProbe attachment M8 threadHead mounting with MV shank 9.5 mm- Status indicator with 2 LEDs- Cable connection via 5-pin DIN 180 socket- 5 threaded connections M8 for touch probes (4 pieces blind plug)Total weight 280gused in good condition; used
Welding Fume Extraction, Soldering Extraction, TBH Type LN 230High Vacuum Filter Device, Laser Extraction, Laboratory Extraction, Extraction System, Filter SystemFabr. No. 230717 year of construction 2018Volume flow 320 m3/hEffective volume flow 50 to 250 m³/hstat. Pressure 20000 PaMotor power 1.1 kWNet connection 230 volts, 50 Hz- stepless suction power regulation via the control electronics on the device- upper part of the housing with several extraction connections 100, 80 and 2x 50 mm- mechanical air filter with approx. 99% separation efficiency- 1 piece filter 300 x 300 x 225
Pneumohydraulic cylinder TOX PressotechnikHydro-pneumatic press, power packType: S 04.00.050.12 DFabr. Item No.: 208696.460 Year of construction approx. 2000Printing capacity: 4.0 ton. at 10 barPressure capacity: 3.0 ton. at 8 barPressure capacity: 2.6 ton. at 7 barPressure capacity: 2.4 ton. at 6 barPressure capacity: 2.0 ton. at 5 barPressure capacity: 1.6 ton. at 4 barPressure capacity: 1.2 ton. at 3 barTotal stroke: 50 mmPower stroke: 12 mmPiston rod: 30 mmThread mount piston rod: M22 x 2 mmCompressed air requirement: 3 to 10 bar- electronic
Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible.
maximum number of results exceeded
please refine your search
