132,109 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Toshiba, Type: Programmable Controller, Modell: EX20-1MCRB5, Seriennummer: 5602167,
Manufacturer: Sata Membranenpumpe, Type: Vario top spray, FREITEXT1: Übersetzungsverhältnis 1:1, FREITEXT2: Fördervolumen Doppelhub 170 cm ², FREITEXT3: Max. Doppelhubfrequenz 140 l/min, FREITEXT4: Max. Fördermenge 23 l/min, FREITEXT5: Luftverbrauch Doppelhub 1,4 Liter,
Manufacturer: Toshiba, Type: EX 40-4MCRD2, Modell: Programmmable Controller, Seriennummer: 94N-2025,
Manufacturer: Titan, Type: SKE/FS 11, Year: ca.2000, Control: Programm, Work piece width min-max mm: 1200-2500, Min.-max. workpiece length in mm: 1500-5200, Min.-max. workpiece height in mm: 250-1500, max. Rollengewicht kg: 10000, automatische Produkterfassung: yes, Belt width: ca.20, Belt uncoiler: yes, Belt tension adjustable: yes, Belt inlet control: yes, Function repeat: yes, Feeding belt L x W x H mm: 6000, Feed out belt L x W x H mm: 6000, Foot switch: yes, Year :ca.2000
Manufacturer: Biesse, Type: Tornado S 1300, Year: 1998, Control: Progrann, Work piece length max mm: 3000, Work piece length min mm: 300, Werkstückbreite max mm: 1300, Number of stacks: 2, Taktleistung ca.: 12, Compressed air bar: 6, Total power kW: 20, Number of sucking lines: 2, Feeding speed max m/min: 25, Feeding speed continous adjustable: yes, Erection in a pit: no, Wight approx. kg: 6000, Year :1998
Transnorm belt conveyor GF 2000-1250-1100 RA2390 Technical data: Conveying length (NL): 2000 mm Framework width (NB): 1250 mm belt width (GuB): 1100 mm Framework width including Motor (MB): 1700 mm height (BH): 210 mm Side guides height: 400 mm Drive: SEW gear Motor with Movi-Mot Conveying speed m/s: freely adjustable between 0.5-1.5 m/s Electrical data: 50Hz V380-500, kW 1.1 Optionally available: Supports Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 1120 Belt width in mm: 1000 Driven: YES Engine type: SEW Eurodrive KW: 1,1/S1 Conveyor speed m / s: 0,4-1,3 scope of delivery: including side guides without supports, including Movimot frequency converter For individual, professional advice, simply contact us. Simply contact us by phone ...
Manufacturer: Hymmen, Type: TLX-M, Year: 1991, Control: yes, Operating side: rechts, Arbeitshöhe: 850, Stain roller: yes, UV-laquer roller: yes, Widht of roller coater: 1350, Widht of metering roller: yes, Attachment bracket roller: yes, Reverseantrieb: yes, Rakeleinrichtung: yes, Werkstückdicke max mm: 80, Work piece length min mm: 250, Feeding speed min/max: 6 - 40, Roller lift out: yes, Hight adjustment by engine: yes, Transportart: Band, Pump system: yes, Compressed air bar: 6, Wight approx. kg: 2000, Required space L x W x H mm: 940 x 2350 x 1600, Year :1991
saw blade diameter: 370x32x3 mm : 15-150 U/min vice: 190 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180x100 mm : 115 mm : 90 mm : 90x90 mm : 115 mm : 100 mm : 120x100 mm : 115 mm : 100 mm : 120x100 mm total power requirement: 5,5 kW weight: 615 kg Overall size: 1400x1400x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: . bar liter capacity: . l total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Pump aggregate The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Thorwesten, Type: SAM 90 NC Eckenputzautomat, Year: 1994, Control: Programm, Single-head automatic trimmer: yes, CNC axes: X und Y Achsen, Number of tools: 3, Min.-max. casement profile height in mm: 100, Workpiece feed automatic: no, Wendestation: yes, Year :1994
Key data: 2000 KW, 11000 V
MWM NG Gas Generator Sets 2000KW/EACH 4x TCG2020V20 From 2006 Hours about 50000 to 51000 . 11000Volt 50 HZ all can work in line, cabinet,gastrain and some pump . ready to load on truck. Localisation Europe
Transnorm belt curve conveyor right GKF 180°-1270-1100-IR1200 RA1946 Technical data: Conveying length middle radius (NL): 5498 mm Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: good (used) Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 180° Driven: ...
Siemens Temperature Meter Sitrans TS500 Thermometer, unused, original packaging, 7 available. 0 - 500 °C Price: per piece.
honing diameter: 9999999 mm stroke: 9999999 mm throat: 9999999 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Used Treiber from a Nagel MSU2 control No warranty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 6100 mm grinding width: 350 mm workpiece height: 300 mm Control: total power requirement: 75/92,5 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 12.500 x 1.800 x 2.600 m Brand Reform Machine no 2050-SL377 Type AR 61 Type 8/CNC CNC Brand Siemens CNC Type Sinumerik 805 Year of make 1997 Machine weight 20.000 kg Horizontal Grinding length 6.100 mm grinding width 350 mm Grinding height 300 mm Engine power 75 / 92.5 Kw Automatic depth feed Grinding stone diameter 600 mm ø Magnetic plate size 5x 1.200 x 350 mm Cooler with magnetic filter Machine size (lxwxh) 12.500 x 1.800 x 2.600 mm 5x Magnetic plate, adjustable in degrees. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Profiling Rod for Sibo Taus 2 1/2 Styles Working diameter 18-63mm 5.5kw main motor Minimum workpiece length 470mm Feed speed adjustable via variator Possibility of production of elements such as: billiard cues, handles for brooms, shovels, rakes or chair legs
TRUMPF TruLaser 3060 laser cutting machine was built in 2007 in Germany by TRUMPF Werkzeugmaschinen Teningen GmbH. The machine, distinguished by its excellent precision and high productivity, is used for machining workpieces with a maximum thickness of 20 mm. The machining process is performed by a stable laser beam with a power of 4 kW and a thickness of only a few μm, which is generated by a reliable laser source with the highest energy efficiency. The automatic pallet exchange system, in turn, allows simultaneous loading and unloading during the cutting process, reducing machine downtime to a minimum. The offered TruLaser 3060 laser cutting machine also features a number of state-of-the-art technical solutions that significantly affect the cutting quality and expand the machine’s machining capabilities. This includes, for example, the ControlLine distance measuring system, which ...
Tom Chandley BOMK4MTU3 Oven and proofer Serial: 10837 Stainless, 15.5Kw, Three deck oven with proofer, adjustable temp and timer controls, chamber size 900mm x 700mm x 180mm, stone based, mobile, 3Ph
Crucible in top condition with ink box, pressure shut-off and good ink rollers. Crucible 26 x 34 cm -
Dismantled two-aisled hall supporting structure with the reference no. hbs1789f2 (L 41.5 x W 43.1 x H 10.3 m) as a section of an originally three-aisled industrial hall. In the second life cycle, the section of approx. L 41.5 x W 43.1 x H 10.3 m to be sold could be used for the construction of a sorting hall, production/storage hall, workshop with overhead crane, etc. APPROXIMATE DIMENSIONS: Built GFA: approx. 1789 sqm; Hall length: approx. 41.50 m; Longitudinal grid: approx. 10.24 m MM frame supports; Hall width: approx. 43.11 m AK frame supports; Hall width: approx. 21.1 + 21.1 m MM columns; Clear height: approx. 9.37 m UK Frame - Binder; HALL STRUCTURE: Bolted flat roof frame construction made of hot-rolled and primed/painted steel profiles with frame supports made of IPB / HEB 900 and frame trusses made of IPBl / HEA 900. The roof substructure consists of hot- ...
1 x CNC bench boring machine in cross-bed design Manufacturer: TOS Type WH13 CNC Year of manufacture 1997 Control: TNC 426 Heidenhain 5-axis X-3500 mm Y-2000 mm Z-1250 mm B-800 mm B-360 Degree Table clamping surface: 1600 x 1800 mm Table load: 12 t Spindle diameter: 130 mm Spindle mount: ISO 50 Spindle speed: max. 1500 rpm Condition: Very good. The machine was only used for repair purposes; no contract manufacturing. Spindle hours: 22,054 Program runtime: 15.661
Type: TG101 Serial number: 700261 Year of construction: 2020, never used! Hole plate diameter: Enterprise E22 Hopper: 6 litres Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 370 x 350 x 430 mm Weight: 39 kg Machine never used, new out of the box
Type: TG105 Serial number: 603429 Year of construction: 2018, never used Hole plate diameter: Enterprise E32 Hopper: 42 litres Power: 3 x 220V, 50Hz, 2.2kW Dimensions: 700 x 580 x 490 mm Weight: 62 kg Never used, new out of the box
Type: TGR103 Serial number: 700292 Year of construction: 2020, never used! Hole plate diameter: Unger, H82 3-piece Hopper: 6 litres Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 500 x 500 x 500 mm Weight: 61 kg With built-in compressor to cool hopper Machine is never used, new out of the box
- Filter surface area: 3m2 - Evacuation: manual Equipment : - Control window with inlet and outlet lighting - Circulation pump - Adjustable dosing pump - Agitator - Connection: butterfly valves, Friedrich n°2 40 Dimensions : - Length: 1750 mm - Width: 700 mm - Height: 1000 mm - In working order
A pad printing machine from Teca Print is being sold. The machine is available 3x. Price per machine. The machine can and should be viewed and tried out on site, as warranty or guarantee is excluded. Price is net Loading facilities available All information without guarantee.
Load capacity at 500 mm load distance: 2 t Lift mast 2x Lifting height: 2900 mm Fork length: 1600 mm Fork width adjustable by hand: 850 mm 4 wheels, super-elastic tyres Net weight: 3.25 t Overall dimensions without forks: 2350 x 1070 x 2070 mm
3000w Year: 2018 5 Axis Fiber Laser 3000w Y Axis: 1500mm Twin Cell Machine
Key data: 201 KW, 235 kVA, 400 V
Net price: 16.500,- € Gross price: €19,635.- - - - - - Volvo generator set 235 kVA Year of construction 2013 - only 50 hours - - - - - Engine: - Volvo Penta (Made in Germany) - Model: TAD 733 GE - 6 cylinders -Turbo -Diesel -Water-cooled - 1500 rpm - Power: 270 hp - - - - - Generator - Manufacturer: MeccAlte - 225 / 237 kVA - 230 / 400 volts - 50 Hertz - - - - - Control / Control cabinet - Incl. power section and switching - With Kuhse control - Automatic start function - Hand start at the touch of a button - Generator monitoring: volts, amps and hertz display - Engine monitoring: engine temperature, oil pressure, battery voltage - - - - - Condition: - The generator is a pure emergency system - It was used for emergency power backup in a factory and has only run for 50 hours of operation - Regular maintenance and test runs were c ...
Siemens GL5114 0gy40-3hu3-z + Blower 2CW6 145 - 8 + Tacho
dishwasher for dishes, Electrolux ELE 506065 type EPPWEASMS, 400 V, 13.5 kW BJ 2018, basket size 50×50 cm, automatic lowering and raising of the hood, 3 washing programs and 1 x continuous washing, self-cleaning cycle, digital display, electrical preparation for automatic washing Washing-up liquid – rinse aid dispenser, original price €17286.00 Dimensions 83x89x176 cm, minus 35% discount
Key data: 150 mm, 300 mm
Two Roll Rubber Mixing Laboratory Mill Manuf.: JRD Bipel 300mm x 150mm rolls Roller type bearings Nip fully guarded Motorised nip adjustment Roller speed variable up to 32 rpm Friction ratio 12:1 Grease lubrication Roller reverse system
Number of floors: . 0 Width of floors: . mm Depth of floors: . mm 2 door cabinets with contents and sockets for SK50 The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: . mm width: . mm height: . mm Workbench with vice and assembly block Kelch The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: . mm width: . mm height: . mm a workbench with a vice The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 2 St. range L-W-H: 1000x500x1000 mm weight: . kg weight max. in kg: . kg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Reading type: . 0 weight - pallet system: . kg length: . mm Calipers, depth gauges Calipers Format: 250mm 300mm 1500mm 3000mm, make: Preissner 2000mm Depth gauge: 300mm, make: Format 200mm The technical data are manufacturers or operators specifications and are therefore non-binding for us. We reserve the right to sell items prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items, accessories for your workshop If you want to sell machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t table length: 1250 mm table width: 900 mm table travel: 1200 mm dayligth: 700 mm upper clamping surface:: 1000x1200 total power requirement: KVA weight of the machine ca.: 12 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity 200 kg/hour With the DLE Mini deleafer washing system
TOS ,W 100 , YEAR 1976, SPINDEL MORSEA
Used vacuum-drum filter made by Padovan, type Taylo 10. Filtration area 10 m2.
Manufacturer: Ferromatik Model: K-TEC350S Year of Manufacture: 2000 Operating hours: 59,477 Clamping Force: 3500 kN Injection Pressure: 1575 bar Stroke Volume: 1040 cm³ International Dimension: 3500II-1636 Power Supply: 400 V, 50 Hz Motor Power: 45 kW Heating Power: 22.7 kW Approx. Weight: 21.7 t Find more here - / Contact us at -
A complete Ernst Nagel brochure machine is sold Composed of Foldnak 8 SP Plus Online Trimmer Machine is used and fully functional. The machine can and should be viewed and tried out on site, as warranty or guarantee is excluded Price is net, VAT can be claimed.
pressure: 200 t table length: 2500 mm table width: 1800 mm table travel: 2700 mm dayligth: 2250 mm upper clamping surface:: 1800x2500 column base area: 1900 mm total power requirement: 22 KW weight of the machine ca.: 30 t dimensions of the machine ca.: . m Nominal force: 1000 kN Top plate pivots Table is movable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for t ...
Max pressure: 150 ton Table size: 620 x 600 mm Between columns: 620 mm Lower and upper table are heated Max temperature: 200° C Weight: 8 ton
Max pressure: 120 ton Table size: 450 x 500 mm Between columns: 450 mm Lower and upper table are heated Max temperature: 200° C
maximum number of results exceeded
please refine your search
