t k schneider used for sale

Pappschere - Board Cutter Krause Typ 110

Leather goods vacuum wrapping machine including various tools for large formats Tools in the format e.g. approx. 34 x 66 cm with and without zipper approx. 33 x 49 cm with and without zipper approx. 26 x 47 cm with and without zipper

max. wheel diameter: 500 mm Hypoid adjustment: ±70 mm axial cross angle: 90 ° Distance Y-: 150 - 350 mm Distance Z-axis: 120 - 340 mm turning speed range - stepless: 0 - 5000 U/min max. torque on the spindle: 57 Nm Cone: 99,2 mm Pull-in force Tool clamping: 23000 N Braking torque max.: 93 Nm total connected load: 20 kVA total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,35 x 2,24 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATION: 1 PHASE 240V/1000W Product size:Length 65mm-550mm :Width 80mm-950mm :Thickness 1mm-18mm speed control: frequency drive motor conveyor speed : 0-70 m/min product material: inner boxes/ card / carton/ label machine dimension: 3000mml x 1350mmw x 820mmh machine weight: 250kg conveyor sizes: 1500mml x 1000mmw

Refrigeration dryer KAESER TAH 6 -used----------- Technical data ----------Maximum pressure: 16 bar, Power supply: 230 Volt

Used mixing plant with 2 mixers consisting of: - Kniele concrete mixer KKM 1500/1000, built in 2004, with elevator - Teka compulsory mixer, year unknown, with elevator - 15 day silos with rotary loading conveyor from above - Control modernization by Sauter Used mixing plant with 2 mixers consisting of: - Kniele concrete mixer KKM 1500/1000, year of construction 2004, with skip - Teka compulsory mixer, year of construction unknown, with skip - 15 daily silos with rotary loading conveyor from above - Control modernisation by Sauter company

Second Hand Kaeser Refrigeration Dryer TI751 75 m3/min Year of construction 2014

Auto stamping machine Friction Feeder and Inkjet Printer Model : KST-PCC100/L15 Zero One Two Three Five Four Seven One Three Four

for sale perkins 800 kva only 500 hours year 1997

Cleanable transport screw Brand: van Beek (The Netherlands) YOM: 2016 Screw length: 1550mm Screw dia: 310mm The screw can easily be extended to clean. Dimensions ready for use: LxWxH 2800mm x1300mmx1150mm Dimensions ready to clean (extended) LxWxH 4250mm x1300mm x 1150mm Condition: very good Video's available.

x-travel: 400 mm y-travel: 350 mm z-travel: 400 mm tool taper: SK 40 spindle turning speed range: 1,0 - 4.000 U/min feeds: 0 - 2000 mm/min quill stroke: 60,0 mm table-size: 650 x 350 mm T-slots: 14 H7 Control: TNC 124 engine output: 5,5 kW weight: 1800 kg dimensions of the machine ca.: 2000 x 1000 x 2100 mm New price ~ 55.000 euros () Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel The data for ...

Inv. Num. : 8639 Type: TZS 1-2,5/1100-N Producer: Kovo Staněk Created: 2017 Parameters: Weight: 2500 kg

1 standard steam boiler, 10 to 13 bar Manufacturer No. K19105/AV Type: 128.9, built in 1990 Output 13 bar, 10.8 tons of steam per hour +Up to 300 °C steam temperature With white main burner for light oil Type: RGL70(2-A), No. 5163093 Year of manufacture 2002, output up to 10,500 kW With 1 horizontal feed water tank Manufacturer: Kyll, Bergisch Gladbach Capacity: 19.860 l, Max. Temp. 110°C, with 1 water treatment system for boiler water with sep. Control cabinet system

Laminating machine, TPM Katana 106, Year of manufacture 2006, approx. 36,000 operating hours, For thermal and wet lamination, Technical details and equipment:, Max. sheet format: 106 x 165 cm, Min. sheet format: 44 x 63 cm, Feeder: Mabeg, Extras: De-powdering and brushing device, Laminating unit with drying drum and separate laminating calender., Large counterpressure roller for increased laminating pressure, 2-stage motor hydraulics, Hot water heated cylinders (2 separate temperature control devices), 2-stage air jet drying (separately controllable), Sheet separator with flying knife (cross cutter) and short cut for OPP film, Stacker with sheet deformation and stop rollers, Central control and operation (Siemens control system / with Profibus), The system has been regularly serviced by the manufacturer and is fully functional., Max. sheet format: 106 x 165 cm, Min. sheet format: 44 x 63 ...

TIPPER TIE KDCM 90 CLIPPER, UNUSED AS NEW

Kodak Trndsetter Q800 with developer year 2016. Model TJ1903 developer EL125T In production X speed, 42 plates per hour software

x-travel: 11000 mm y-travel: 2500 mm z-travel: 1500 mm control: Heidenhain iTNC 530M spindle taper ISO: ISO 50 spindle turning speed range: 20-4000 U/min spindle motor: 30 kW feeds: 1-20.000 mm/min Table dimensions: 2000 x 2500 mm table load capacity: 25000 kg V-axis: 1250 mm tool piece magazine with: 40 pieces total power requirement: 50 KVA weight of the machine ca.: 42 t required space: 19,1 x 10,5 x 5,75 m equipped with: - CNC Control HeidenhainiTNC 530 (7 axis controlled) - ATC 40-fold - Chip Conveyor - Coolant through spindle (20 bar) - Cooling Unit - Floor Plate 6400 x 1850mm - NC-Rotary Table 2000x2500mm, 25t - Head Pick-Up Station with 2 Heads -- Milling Head VK -- angular Milling Head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bread loaf forming line composed of: -Weigher / divider / girder: For all types of dough (year 2007) Automatic lubrication system. Adjustable weight. from 60 to 600 grs. Speed variator. 40 kg hopper for dough, made of stainless steel and non-stick material. Flour sifter. Digital parts count. -400-basket resting chamber, manufactured in 2004. Adjustable time. -Bread loaf former, made in 2004 tape width: 600mm

Type: TG3000/600 Serial number: 278 Belt width: 600 mm Transport length: 3150 mm Power: 3 x 380V, 50Hz, 0.09kW Dimensions: 3200 x 800 x 1050 mm Weight: 110 kg

Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between tableand slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 E5931468 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons

Manufacturer: KASTO Model: Twin A 4 AU CNC Year of Manufacture: 2004 Cutting Capacity: 400 mm x 400 mm (Ø 400 mm) Technical Specifications - Cutting Range Round: 400 mm - Cutting Range Square: 400 x 400 mm - Material Feed per Stroke (automatic): 600 mm - Multiple Feed Length: 99,999 mm - Cutting Speed: Stepless, 20–130 m/min - Total Drive Power: 7 kW - Saw Motor Power: 4 kW - Speed Reduction: Stepless adjustable - Material Height: 100 mm - Saw Blade Dimensions: 5700 x 41 x 1.3 mm - Shortest Cutting Length (automatic): 6 mm - Shortest Remnant Length (automatic): 80 mm - Voltage: 380V / 50Hz - Machine Dimensions (LxWxH): 2415 x 2400 x 1720 mm - Weight: 2200 kg Special Accessories - Coolant system - CNC control - Idle run monitoring - Machine roller table - Band tension control - Height measurement system - Light barrier - End stop Optional Roller Conveyors: - Roller Conveyor 30 ...

Key data: 1400 mm, 440 mm, 450 mm

Year of manufacture: 1978/ GÜ: 2007 Table dimensions ... 2000x425mm Axis X ... 1400mm Axis Y ... 440mm Axis Z ... 450mm Main engine power ... 11kW Machine weight ... 5170kg L x W x H ... 3920x2520mm The machine is in good condition, possible to test under power.

Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible.

Ice water system

Kasto Twin U 4 Depth of throat: 400 mm Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm Power needed: 6 kW

Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion E51031468 stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000

König Brötchenanlage composed of: Dough dividing and rounding machine type REX Classic T6S Pre-proofer type ECO TWIN 800 with cutting station with Stüpfler (Kaiser) with lateral pretzel discharge Deduction - Bakery condition not cleaned - partially. in need of overhaul

Kodak Achieve T400 Platesetter Age: 2022 Max. Plate size: 838 x 990 mm Min. Plate size: 267 x 215 mm Max. image area: 827.9 x 990 mm Speed: up to 28 plates/hour Resolution: 2500 dpi 830 nm platesetter Semi automatic plate loading and unloading Harleqin Multi RIP 13.0 Dongle

Komptech Terminator 5000 SD Category: Garbage Shredders Specification: Category: Universal Waste Shredder Serial / reference number: 481148 Power: 446 hp / 328 kW Weight: 27 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: Terminator 5000 S Diesel engine: CAT C13 Tier 4 Final/Stage V F-Crushing Unit Armoured rollers – new Sickle teeth Hydraulically adjustable cutting gap 0-45 mm Overbelt magnet Central lubrication Remote control

50 cm working width, with Lehnhoff MS01 holder

NEW PRICE: 3,150.00 EURO Technical data: Volume flow ISO 7183 A1: 0.6 m³/min Pressure dew point: 3°C Pressure loss: 0.07 bar Electrical power consumption at 100% vol.: 0.29 kW Electrical power consumption at 50% vol.: 0.17 kW Overpressure: 3 to 16 bar Ambient temperature: +3 to +43°C Max. compressed air inlet temperature: 55°C Dimensions W x D x H: 630 x 484 x 779 mm Weight: 70 kg Compressed air connection: G 3/4 Condensate drain connection: G 1/4 Power supply: 230 V / 1 / 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clipping machine Manufacturer: Technopack Tipper Tie Made of stainless steel and durable industrial plastic Easy to clean thanks to smooth surfaces Machine dimensions: Width: 100 cm Depth: 78 cm Height: 180 cm Power: 0.1 kW Voltage: 2.5 A Compressed air: 4–6 bar / 0.4–0.6 MPa

Output (Packs Per M?Inute): 45 U/min // Type : Barrel

Merk: Werner Koch Technik GmbH Model: CKT 110 Bouwjaar: 1999 Bo Ud Dju Aqg Sjvycjww Hoeveelheid droge lucht: 110 m³ /h Volume bak: 400 L

General SKU337T903 LocationBarneveld MakeKMPT process technology TypeHZ 100/1.6 Si No.60000886 Year of construction2007 Main Features MaterialStainless steel Motor37 KW Inlet diameter65 mm Specified Features - Peeling centrifuge Peeler centrifugesyphon type Capacitynett: 157,5 Ltr. Basket sizesDia: 1250x700 mm Wall thickness20 mm Max. loading weight308 kg Motor37 kW, 400v, 1470 rpm, (ex) Max. basket speed1520 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck InletDN 65 Solids outletDN 250 Liquid outletDN 125, DN 50 MaterialStainless steel 1.4404 (316L), Stainless steel 1.4462 (Duplex2205) Information Mounted on framecheck Total height3,5 m Weight5760 CEcheck Floorspace5,35x4,5 m ATEX compatiblecheckPeeling centrifugesAndritz KMPTCentrifuges > Peeling centrifugesBrand > Andritz KMPT What you can expect from Foeth: -- Machine is in work ...

General SKU366W1572 LocationBarneveld MakeKrahnen TypeAirflex 30 type 4 No.3405030 Year of construction2009 Main Features MaterialStainless steel Specified Features - Miscellaneous MaterialStainless steel Capacity470 mm MotorAir Information Total height1,12 m Weight69 kg CEcheck Floor space0,60x1,50 m ATEX compatiblecheck Extra SpecificationsSuction width 650 mm, brush width 470 mm, tank volume 21 l., dirty tank volume 25 l., air cap. 61-90 m3/h, suction cap. 148 m3/hMiscellaneousKrahnenMiscellaneous > MiscellaneousBrand > Krahnen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU250X199 LocationBarneveld MakeOuto Kumpu TypeHS10-64:50 No.07-312 Year of construction2007 Main Features MaterialStainless steel Dia/Width600 mm Specified Features - Metal detector MaterialStainless steel Metal detectorcheck Electric capacity2 kW, 220 volt Tunnel sizes600 Belt width600 mm Belt length300 mm With motor2 kW, 180 volt, 1750 rpm With variable speed drivecheck InletDN100 Outlet170x160 mm Information Mounted on framecheck Total height1,00 m With switchcheck Floorspace1,20x1,30 m Extra Specificationsbelt is equipped with permanent magnetic rollers.Metal detectorsOuto Kumpu Technology USAPackaging machines > Metal detectorsBrand > Outo Kumpu Technology USA What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ...

General SKU299X419 LocationBarneveld MakeCoperion Werner & Pfleiderer GmbH Stuttgart TypeKP-120/250 KombiPlast Compounder Mach.No.20493087 Sizes Screw diameter120 mm Main Features Motor310 KW Inlet diameter200 mm L/D15 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter120 mm L/D15 Counter rotatingcheck Electric heating4 Water coolingcheck DC-motor310kW, 440V, 1780rpm With variable speed drivecheck Screw speed365rpm Feeding with hoppercheck Feeding with metering screwSide feeder MaterialNitriding Steel 1.8550 Information Year of construction2004 With switchgearcheck (as is) Weight± 22.000 kg Extra SpecificationsComplete line with side-feeder, discharge screw and partially control cabinet info compounder: Krupp Werner &: Pfleidere GmbH typ: D315 EXT Single screw screw dia: 250 mm screw lengte:1500 mm. screw van be heated L/D: ...

Inlet size: 1.370 x 990 mm - Rotor W x Dia.: 1.250 x 1.300 mm - With 200 kW Electrical motor

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Blue , Working Hours: 200 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 1520 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 1900 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 2742.4 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/stamford-a09i220986-generator- 1900-kva-used/818, , = More information =, , Empty weight: 12.500 kg, Type number: A09I220986 GENERATOR 1900 KVA

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 40413 Hour(s), Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 280 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 350 , Generator Hz: 50 , Generator Volts: 415/240 , Generator Amps: 487 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/perkins-2306c-e14-tag2-generat or-350-kva-used/689, , = More information =, , Empty weight: 2.495 kg, Type number: 2306C-E14 TAG2 GENERATOR 350 KVA

A self-built powder welding machine with a power source Kennametal and an MTA cooler for applying Stellite to valves is available. 1) Cooler MTA TAE EVO 10M, year of construction: 2013, cooling capacity: approx. 3kW, refrigerant: R407, filling quantity: 0.8kg, max. operating pressure: 28bar, flow rate: approx. 0.59m³/h. Machine dimensions X/Y/Z: approx. 600mm/600mm/800mm, weight: approx. 100kg. 2) Power source Kennametal Stellite PTA Junior Star, year of construction: 2013, open circuit voltage: 75V, welding current range: 10A/10V-250A/38V, protection class I. Documentation available. An on-site inspection is possible.

original Kodak laser head lift for TH3

Key data: 1100 mm, 2 , 180 mm

Broadband KÜNDIG Made in SUISSE - 1100 mm grinding width, 180 mm height - 2nd strip with: three-roller units / 2nd grinding roller with shoe for fine sanding - Grinding table Fix Sodas can be sanded in a continuous flow ( KUNDIG patent) - Electronic control The machine is immediately available from stock The price is: 4.900,-€ net from stock. That's a great price! A demonstration is possible

Emulsifier Karl Schnell Type: 250 Voltage: 400V / 50Hz Dimensions: 160x130x190cm

Height=1.21 m, Overall length= 1.17 m, Overall width= 0.98 m, Net weight= 118 kg,

Maximum load capacity, modular flexibility, and quick assembly †the Meva MEP shoring tower is available at Form-on as a smart complete package for your construction project. ✅ Ideal for bridge and high-rise construction ✅ Stable, time-saving & versatile ✅ Delivered as a ready-to-use set †fast and reliable 📦 Only on market day: Secure your MEP complete package †available immediately , only while supplies last! 📩 Request your quote today & get your project off to a smart start! Price valid: per total quantity Total price: 29,999.00 EUR Partial quantity: not possible Subject to prior sale Quality mix This package contains items of our various quality levels. Please take the exact qualities from the product listing above. 20.00 x MEP-frame 55 (Art-No. 29-909-10), 2 stars 20.00 x MEP-frame 110 (Art-No. 29-909-15),  ...

Automatic log cutter / strand cutter for ceramic masses. Separation is carried out by means of cutting brackets with metal wire. Maximum passage: 360 mm wide / 180 mm high; Drive: 1.5 kW (left in working direction); Measuring tape: 320 mm wide x 750 mm long. The cutting thickness and length can be adjusted via changing wheels and measuring roller. The scope of delivery includes various interchangeable wheels and height-adjustable spindle feet.

Krones Triblock (rinser, filler and capper) / 20,000 bph / 1.5l The Krones Triblock from 2005 is a high-performance filling line with an output of up to 20,000 bottles per hour in 1.5-litre containers. The machine is designed for the filling of still and carbonated beverages. It processes bottles with 28 mm closures and integrates the process steps of bottle handling, filling and capping in a compact machine design. The system stands for reliable technology and an efficient production process.