t k schneider used for sale

SPECIFICATIONS: Installed power: 6 kW Workpiece length: 1200 mm Pin width: max 100 mm Accessories: 1 soundproofing room 1 loader

SPECIFICATIONS: Installed power: 6 kW Workpiece length: 1200 mm Pin width: max 100 mm Accessories: 1 soundproofing room 1 loader

turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tray Sealer/Skin Packer Model: Erme TSK 410 incl. compressor + MAP-GasValve MAP-Traytool 2 x 225x175mmm incl. machines can be equipped with tools for skin-packs

PISANI TR4 4-shaft beam planer: – working dimensions L=400 x H=300 mm – variable feed speed – motorized width and thickness adjustment, with digital displays on the control panel – pneumatic approaches at the inlet and in the machine center – with idle roller conveyors at the machine inlet and outlet – complete with 4 knife heads – total installed power 55 kw, volt 380 – weight about 5500 kg Trees: – under 11 kW / 15 HP – above 18.5 kw / 25 hp – right kw 11 / hp 15 – left kw 11 / hp 15 Machine not CE compliant, for export

The curing furnace consists of a tunnel furnace in which the workpieces are baked after coating. The furnace is a straight tunnel furnace. The frame is made of steel with insulated panels. The mineral wool insulation becomes 150 mm thick in a special construction to prevent thermal bridges 1 Inner dimension length 7,000 mm Inner dimensions width 1,000 mm Inner dimensions height 2,500 mm 2 Outer dimensions incl. thermoblock, length 7,200 mm Outer dimensions incl. thermoblock, width 1,300/2,300 mm External dimensions incl. thermoblock, height 2,800 mm 3 substructure 1 set of steel profiles 80 x 80 and 40 x 80 mm 4 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5010 5 Insulation 1 set of rock wool 150mm 75 Kg/m³ 6 Ventilation system 1 set of galvanized steel sheet 7 Temperature max. 220°C 8 fans 1 pc. 7,500 m³/h 9 electric motors 1 pc  ...

surface area: 800455 mm no. of flutes: - groove width: - mm weight of the machine ca.: t dimensions of the machine ca.: m Universal swivelling + tilting table Table top rotatable 360 Tiltable forwards/backwards -15 / 45° Sideways swivelling +/- 30 Cross adjustment ( Y ) 160 mm Mounting surface 350 x 250 mm ( additional adapter plate ) Table surface 800 x 455 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Formato máximo: 1000 x 1400 mm Formato mínimo: 300 x 300 mm Año: 2022

The US-2000 LB with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

Working width: 300 mm Number of rollers: 2 St. Feed speed: 20 m/min. weight: 300 kg Dimensions (L/W/H): 4000x600x1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24386 Specifications: - Mobile cartridge filter system with articulated extraction arms - Suitable for welding mist extraction when welding - Steel + stainless steel + aluminium + unalloyed or galvanised steels - Welding fumes class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - max. static pressure 2500 pa - Filter area 20 m² -Auto. Cleaning of the filters - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - Fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Used semi-automatic carton machine from Trepko type 71. New 2014. Technical data: - power supply 3x400V 50/60HZ - dimensions: length 2700mm, width 1940mm, height 1870mm, - weight 500kg

SMERAL TRNAVA LEN 63C eccentric press was built in 1988 in Czechoslovakia by Šmeral Trnava. It is an extremely reliable machine designed for cold metal forming. It is capable of performing operations such as precise punching, stamping and bending of workpieces. The high press force of 63 tonnes, combined with a very dynamic slider, guarantees the best machining results. The slider makes between 45 and 140 strokes per minute and its stroke is adjustable in the range from 10 mm to 105 mm. With its very rigid C-shaped design, the SMERAL TRNAVA LEN 63C also provides excellent stability during even the most intense challenges. All this makes the offered press an excellent choice for the production of parts with high repeatability and excellent precision. The LEN 63 C eccentric press weighs 5850 kg. Technical specifications of the SMERAL TRNAVA LEN 63C press - maximum press force: 63 t (6 ...

Used packer by Techmar type PAK-5.0. New 2006. Packer for kefir. Weight 750 kg. Pressure 8 bar. Power 1.8 kW. Power supply 400 V.

Used automatic scales from Mettler-Toledo Garvens type XS3. New 2012. Automatic scale for single load checking. Technical data: - Max. belt speed: 60 m/min, - Throughput: 250 pcs/min, - Product weight: max. 1500 g - min. 7 g, - Air supply Min. 500 kPh, - Operating temperature range: 0 C° / +40 C°, - Power supply 100 - 240 V~ / 50-60 Hz.

Toshiba MMY-MAP1204HT8P-E Air Conditioner Outdoor Unit with 6 Toshiba 4-way ceiling cassette for cold and heat incl. original Toshiba remote control Cooling power: 33.5 kW Heating power: 37.5 kW Refrigerant: R410A Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at

Toshiba MMY-MAP1604HT8P-E Air Conditioner Outdoor Unit with 6 Toshiba 4-way ceiling cassette for cold and heat incl. original Toshiba remote control Cooling power: 45 kW Power heating: 50 kW Refrigerant: R410A 2 sets available, each with 1 outdoor unit and 6 indoor ceiling cassettes including remote control Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at

ID3425 MRS type 2-5 year/Baujahr 2019 6.4 t Motorized clamshell bucket with electro-hydraulic drive, 4.3 cbm capacity, (was only in use for 1 year, dredged approx. 200,000 cbm), inclusive identical bucket (built in 2008) as spare parts carrier (the predecessor of the new bucket) Motorized clamshell grab with electro-hydraulic drive, 4.3 cbm capacity, (was only in use for 1 year, excavated approx. 200,000 cbm), including identical grab (built in 2008) as spare parts carrier (the predecessor of the new grapple)

TTS Hydraulics 7T 09 3 F PA S024 A 85 5B-S02 HOBC T LA1 COD,No. DTBO10507P SK No. BT15036893 Planetary gearboxes with hydraulics

Key data: 919 KW, 1800 1/min

This marine propulsion engine is rotating, removed due to re-motorization and has 15,580 turning hours turned after complete overhaul

Used machine in good condition. Available for immediate delivery. - Control: SINUMERIK 880 T 3 - Max. length: 400 mm - Tool-holder cone: CONO ISO 50 - Tool magazine capacity: 16 #

Used machine in good condition. Available for immediate delivery. - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Laser Type: CO2 - Max. workpiece weight: 710 kg - Positioning speed X/Y: 60 m/min - Simultaneous positioning speed: 85 X+Y m/min - Laser Output: 4 kW - Maximum material thickness mild steel: 20 mm - Maximum material thickness stainless steel: 15 mm - Maximum material thickness aluminium: 10 mm - Control: SINUMERIK 840D - Machine ON Working hours: 56.734 h - Beam ON Working hours: 28.407 h - Weight: 11.500 kg - Dimensions (long x wide x high): 9.300 x 4.600 x 2.000 mm

Used machine in good condition. Available for immediate delivery. - Spindle power?: 28/21 kW - Control: 840 D SIEMENS - Axes: 5 - Workpiece diameter: 240 mm - Max. spindle speed: 5.000 rpm - Stroke (X): 190 mm - Stroke (Y): 40 mm - Stroke (Z): 555 mm - Maximum tool diameter ?: 200 mm - Main spindle bore: 79 mm - Weight: 6.500 kg

OPTIONS INCLUDED: - Laser TruFlow 3600 incl. LensLine - TruTops Tube license software - Ejector station 6m with brush table - Outer circuit diameter 250mm incl. set of clamping jaws incl. guide rollers for ejection station - SeamLine Tube - Tropical version - MDE interface - LoadMaster Tube 6m with bundling cavity, 2 clamps - Scratch-free grouping cavity LoadMaster Tube 6m - LoadMaster Tube 6m oscillating transport stroke - Pitch mandrel - Max. outer circle diameter of rectangular tubes: 250 mm - Max. raw material length for automatic loading: 6.500 mm - Max. finished part length: 6.500 mm - Max. workpiece weight: 25 kg/m / 37.5 kg/m kg - Laser Output: 3,6 kW - Laser Type: CO2 - Maximum material thickness mild steel: 10 mm - Maximum material thickness stainless steel: 6 mm - Maximum material thickness aluminium: 5 mm - Control: SIEMENS SINUMERIK 840D - Machine ON  ...

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 500 x 380 x 300 mm - Number of tool stations: 14 - Spindle taper: BT 30 - Spindle power : 2.2 kW - Control: CNC FANUC SERIE 16iM - Working area (X x Y x Z): 550 x 380 mm - Max. workpiece weight: 250 kg - Max. rapid traverse (X, Y, Z): 48 mm / min - Max. spindle speed: 1.000 rpm - Weight: 1.700 - Dimensions (long x wide x high): 1.565 x 1.907 x 2.216 mm

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 500 x 400 x 330 mm - Number of tool stations: 14 - Spindle taper: BT 30 - Spindle power : 5.5 kW - Control: FANUC 16i-M - Working area (X x Y x Z): 600 x 400 mm - Max. workpiece weight: 250 kg - Max. spindle speed: 8.000 rpm - Dimensions (long x wide x high): 3.000 ? 2.000 ? 2.400 mm - Weight: 2.000