133,335 used machines on RESALE, but how to find them? Machine Search
MWM TCG 2020 V12 Natural Gas Generating Set. Capacity: 1,235 kW Fuel: Natural Gas Year: 2011 Hours: 29,000 Voltage: 400 V Frequency: 50 Hz Scope of supply: Engine, Alternator (Marelli), Engine Panel, Control Panel, Gasline, Heat Exchanger. Photos are for illustration purposes only. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
Transnorm angled-belt conveyor 30° 1750-1000-800 RA2305 NEW Make: Transnorm Year of manufacture: 2022 Inlet angle: 30 Length center: 1670 mm Belt width (RB): 800 mm Frame height: 300 mm Nominal/external width (NB): 1000 mm, 1200 mm with motor Conveying speed: with Frequency converter for infinitely variable speed control between 0.25-0.75 mm/s, V230/400 kW 2,2 Overall height side wall: 200 mm Scope of delivery: with motor and side guides Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: angle: 30° scope of delivery: including side guides without supports, inklusive Frequenzumrichter condition: Ausstellungsstück Antrieb: SEW Getriebemotor Electric data: 380-400 Bauhöhe in mm (BH): 300 KW: 2,2 Belt width in mm (GuB): 800 Optional erhältlich: Füße Construction year: 2022 Conveying length in mm (NL): 1670 Frame width in mm (N ...
Transnorm curved belt conveyor left 45°-950-800-IR900 RA2306 Technical data: Frame width (NB): 900 mm Frame width with Bearing cover: 950mm Frame width with Bearing cover and Motor: 1250 mm belt width (GuB): 800 mm height (BH): 250 mm Inner radius (IR): 900 mm Conveying angle: 45° degrees conveying speed (v m/s): 0,42-1,50 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 0,75 / S1 Year of construction: 2022 Height Sideguides: 200 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2022 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 950 Belt width in mm: 800 angle: 45° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: freely adjustable scope of delivery: including side guid ...
Transnorm angled-belt conveyor 45° 1400-1050-800 RA2304 Exhibit Make: Transnorm Year of manufacture: 2022 Inlet angle: 45 Length center: 1400 mm Belt width (RB): 800 mm Frame height: 270 mm Nominal/external width (NB): 1050 mm Conveying speed: 0.717 mm/s V230/400 kW 1,5 Overall height side wall: 300 mm Scope of delivery: with motor and side guides (if required, please ask) Optional: Supports Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: scope of delivery: including side guides without supports angle: 45° KW: 1,5/S1 condition: Ausstellungsstück Bauhöhe in mm (BH): 270 Antrieb: SEW Getriebemotor Optional erhältlich: Füße, Movi-Mot Electric data: 380-400 Frame width in mm (NB): 1050 Conveying length in mm (NL): 1400 Belt width in mm (GuB): 800 Construction year: 2022 For individual, ...
Content: 1.000 Ltr. Working pressure: Max. steam pressure 1.1 bar at 50°C, 1.3 bar at 55°C Material: Stainless steel, 1.4404 inner tank, 1.4301 frame and outer jacket Design: cubic, upright, on 4 feet, with welded construction for access by forklift or pallet truck, Insulating jacket with perlite insulation, electrically heated up to 120 °C, 2,000 W, 230 V, Inner tank lined with ETFE coating Spout with disc valve DN 80 reduced to DN 50, cover DN 400, 1 x Safety Valve, 1 x Camlock Coupling 1", Total weight 381 kg Last Purpose: Food Height: approx. 1,670 mm Width/Length: approx. 1,200 mm/1,100 mm
Milk Homogenizer Capacity 20.000 lt/h Motor: 90 kW 2 stages Hydroulic control
grinding diameter: 630 mm grinding length: 4000 mm centre height: 335 mm total power requirement: 28 kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 550 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand, Modell TTV-C40-125 C40P01B clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 550 x 400 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 90A fuse protection Approx. dimensions: 1,550 x 1,050 x 3,120 mm Weight approx.: 3,200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fully Automatic Bread Slicing Machine Manufacturer: TREIF Type: DISKUS – SB Technical data: Round knife cutting bread slicer Oil-free cutting even of warm breads 3 cutting thicknesses selectable: 8mm, 10mm and 12mm Bread passage: L 380 x H140-160 x D280 mm Automatic bread gripper suitable for all types of bread with bread rack for bagging with sight glass cover for optimum safety during the cutting process Easy cleaning without having to move the machine 400 volts / 0.9 kW / 10 A Dimensions: H110 x W90 x D76 cm Weight: 200 kg Mobile on 4 pulleys with 2 brakes Year of Make: 2010 Function checked, machine is thoroughly cleaned and ready for immediate use! Condition, see original pictures! If you have any questions, email or call.
Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...
saw blade diameter: 20-200 / 30-300 mm workpiece-spindlehead motor: 0,3 kW grinding wheel diameter: - mm total power requirement: 4 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 4 x 2,5 x 1,5 m No. 1532 Workbench system with 7 saw blade grinding machines and integrated grinding dust extraction system Working width: 20-200 / 30-300 mm Drive power: 0.25/0.3 kW Workbench with base cabinets and various tools Integrated dust extraction for each workstation in the workbench Weight approx. 1100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mast: VFHM 435-0A7, Integral Sideshift, 1000mm Forks, Black Solid Tyres, LPG, Power: 25 KW, Own Weight: 2780 KG, Capacity: 1750 KG
1997 Folding machine T 500-4/4 first unit pile feeder 4 buckles second unit 4 buckles delivery A56/DC available: immediately Location: Germany
We offer a refurbished Peri Trio 330 - 126.52m² with 65% discount - newly occupied Frame cleaned, corrosion sealed with zinc phosphate coating. New original Peri Finply formlining. Accessories new, or Peri rental storage quality available on request. New value approx. 72,134.00€ Special net price: 25.246,90€ Pcs. Description 10 Elements TR /4 330 x 240 - New Plate 7 elements TR /4 330 x 120 - new plate 3 elements TR /4 330 x 90 - new plate 2 elements TR /4 330 x 72 - new plate 2 elements TR /4 330 x 60 - new plate 2 elements TR /4 330 x 30 - new plate If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. ...
Key data: 800 KW
Module 2 TCG 2016 V 16 C - 800 kW - 43,636 operating hours -Natural gas - Engine number: 2211009 - Year of construction: 2013 - Complete TEM control system with auxiliary unit control - RMG Gas Line – Natural Gas All service work was carried out by MWM service partners according to the manufacturer's specifications / maintenance plan. Sale due to site conversion and plant renewal. More pictures, information and offers on request. Viewing possible at any time by arrangement. Location: 49811 Lingen / Ems Subject to prior sale
CURSAL TRSI8000 OL700 series parting line consisting of: - automatic loader with 1 column and 3 vacuum suction cups - 6-chain horizontal feeder with singularizer for miter saw - TRSI8000 OL700 cross-cut saw with integrated pusher and length optimizer - CNC sorting discharge belt with 2 ejectors - 2 inclined ways each with 4 idle rollers for side discharge Total overall dimensions about 14 x 5 meters Year 2018, CE regulations, compatibility with industry 4.0 Visible, installed and in operation until August 2025. Delivery availability from September 2025.
Condition Used Stock Number 3350P Tetra Pak Laval Hoyer extrusion line Type ARB.BORD IND Tetra Pak Laval Hoyer extrusion line Serial number 348-5214 Tetra Pak Laval Hoyer extrusion line Year of construction 1998 Tetra Pak Laval Hoyer extrusion line Capacity 27000 sandwiches/hr Tetra Laval Food Hoyer spiral freezer Type ST LINE 1100 Tetra Laval Food Hoyer spiral freezer Serial number 348-1023 Tetra Laval Food Hoyer spiral freezer Year of construction 1998 Tetra Laval Food Hoyer spiral freezer Refrigerant NH3, Ammonia Tetra Laval Food Hoyer spiral freezer Evaporator 2 pc. Retech GLS 50-18-280 Tetra Laval Food Hoyer spiral freezer Tetra Pak Laval Hoyer dip and transfer unit 12 lane Tetra Laval Food Hoyer spiral freezer Type HOYWRAP MW1200-6 Tetra Laval Food Hoyer spiral freezer Serial number Z415.3872 Tetra Laval Food Hoyer spiral freezer Year of construction 1998 Tetra Pak H ...
2005 folding machine first unit pile feeder F510 Counter 4 buckles second unit 4 buckles delivery A56/DC available: immediately Location: Germany
THERMO SCIENTIFIC 8000 WJ CO2 Incubator / Oven Water Jacket Technology (WJ) Model 3429 Capacity: 184L CO² range: 0 to 20% CO² inlet pressure: 103.4 kPa. CO₂ sensor: CT Temperature range: +5°C UT to +50°C. HEPA filter inside. Glazed interior door. Aluminum control panel with digital display. 4 stainless steel shelves 1 container of water External dimensions HxWxD: 100x66x60cm. Interior dimensions HxWxD: 68.1 x 54.1 x 50.8 cm. 230V 50/60Hz. Net Weight: 120.2 kg Equipment tested at 37°C with a CO2 level of 5% In excellent working order and aesthetics Slight rust marks on the back of the outer shell (see photos) HEPA filters will need to be replaced The equipment will be delivered with the water jackets emptied. It is imperative to fill them in before you can use the equipment according to the manufacturer's recommendations Year of Manufacture: 2009
Thermo Scientific Multidrop 832 Microplate Dispenser The Multidrop 384 is an automatic, programmable eight-channel microplate dispenser. It features a peristaltic pump for fast, continuous dispensing of liquids into 96- and 384-well microplates. Microplate Dispenser 96 and 384 Precision, speed and reliability in distribution. Possibility of distribution by selecting the number of columns. External dimensions: 31x32x18 cm Weight: 7Kg Dispensing accuracy: 5 μL: ±3% (typical) 20 μL: ±2% (typical) 100 μL: ±1% (typical) Dispensing speed: 96-well plate: 20 μL in 5 seconds; 50 μL in 8 s 384-well plate: 20 μl in 20 s; 50 μl in 25 s Year of manufacture: 2005
Key data: 120 l/min, 12 W, 7
Text
Key data: 400 l/min, 5
Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!
Key data: 400 l/min, 6
Central plant with 2 pieces of automatic centrifuges, operation until February 2019 with oil. The Cleaning system for oil incl. tank 20 m3, is equipped with two automatic centrifuges of 150 m3 each. 200 liters/min. The total capacity of the plant is 300 to 400 liters per minute. Oil or emulsion, with emulsion more than 400 liters possible. Two centrifuges T42 , Clean tank 20 m3 oil (divided into two separate tanks with overflow) incl. pump for Supply of production with pure oil. In addition, the system has a lot of accessories: all spare parts + an old one centrifuge from 1987 as spare parts dispenser, a lifting tipping device for the Sludge emptying of the 200 kg buckets. The sludge ejection runs with this centrifuge automatically into the bucket under the centrifuge. The scope of delivery also includes a additional electrical cabinet for a second system with the sam ...
; Gross weight [kg]: 1550; Engine: Deutz TD2.9L4-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : Coolant heater and battery charger; Water Tank Volume [l]: 250
; Gross weight [kg]: 1550; Engine: Deutz TD2.9L4-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : Coolant heater and battery charger; Water Tank Volume [l]: 250
2005 folding machine first unit pile feeder F510 Counter 4 buckles second unit 4 buckles delivery A56/DC available: immediately Location: Germany
2000 folding machine Round pile feeder 6 buckles T540-2-X mobile knife ASP 66-2 ME (2005) available: immediately Location: Germany
Automatic plate loader Plate processor Automatic delivery. Stacker Program and Dongle Monthly contract serviced
Tetra Pak Separator H845 – Factory New High-Capacity Milk Separator The Tetra Pak Separator H845 is a high-performance industrial separator designed for hot milk processing in dairy production facilities. Built with Tetra Pak AirTight technology, this separator ensures gentle product handling, minimal oxygen intake, and reduced product losses, making it ideal for modern dairy processing plants. This factory-new unit, designed in 2024, has never been installed or used in production, offering manufacturers the opportunity to acquire premium Tetra Pak technology in unused condition. General Information - Manufacturer: Tetra Pak - Model: Separator H845 - Condition: Factory new - Year of Design: 2024 - Installation Status: Never installed / never used in production Technical Specifications - Application: Hot milk separator - Processing Capacity: up to 40,000 l/h - Air Pr ...
For sale I offer a Tractel grab hoist T516D. The grab hoist is an unused exhibit with slight traces of storage, which can be seen in the pictures. The grab hoist is sold with a new UVV test. Ropes can be offered on request Dates: - The T 516 D grab hoist is a powerful hand rope hoist for pulling, lifting, lowering, tensioning and securing loads - Load capacity 1600kg - Length, height, depth without hook 523x315x127mm - Rope diameter 11.5mm - Weight 13.5kg without rope Shipping available for an extra charge. Grab hoist is workshop-tested and immediately ready for use. Supplied with lever tube, without reel and without rope # Grab hoist # Lever hoist # Multi-purpose hoist # Tractel # T516 # T500 series # 1600kg # 1.6to
9 rolls of 3,048m each Price per m new, partly original packaging
Transnorm belt curve conveyor left GKF 90°-600-400-IR1000 - NEW RA2307 Technical data: Frame width (NB): 600 mm Frame width with Bearing cover and motor: 850 mm belt width (GuB): 400 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 1000 mm Conveying angle: 90° degrees Conveying speed (v m/s): 1,0m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 / S1 Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Frequency converter for stepless speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 1000 Nominal / outside width in mm: 600 Belt width in mm: 400 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: 1,0 scope of ...
Curved plate chain with attachable gripper material LFG and NFG as good as new, partly in original packaging Number and lengths see pictures Price per m
For sale I offer a Tractel grab hoist T532D. The grab hoist is an unused exhibit with slight traces of storage, which can be seen in the pictures. The grab hoist is sold with a new UVV test. Ropes can be offered on request. Dates: - The T 532 D grab hoist is a powerful hand rope hoist for pulling, lifting, lowering, tensioning and securing loads. - Load capacity 3200kg - Length, height, depth without hook 620x355x130mm - Rope diameter 16.3mm - Weight 24kg without rope Shipping available for an extra charge. Grab hoist is workshop-tested and immediately ready for use. Supplied with lever tube, without reel and without rope. # Grab hoist # Lever hoist # Multi-purpose hoist # Tractel # T532 # T500 series # 3200kg # 3,2to
Key data: 1176 KW, 1650 1/min
This marine propulsion engine lacks a connecting rod, piston and liner A cylinder head and a turbocharger is damaged
Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system
Mettler Toledo RE40D Digital Refractometer RE digital refractometers are ideal for measuring the refractive index, Brix, and concentration of aqueous solutions, such as glycerol, propylene glycol, and acetone. They determine the refractive index by a method based on total reflection, which allows for accurate measurement even for cloudy or dark samples. These refractometers are equipped with built-in and compact Peltier thermostats for temperature control; No water bath is required. They require small sample volumes (0.2 mL) and are easily calibrated with water or certified standard solutions. Measurement range nD: 1.32-1.70 Brix measuring range: 0-100% Accuracy nD: 0.0001 Brix accuracy: 0.1% Temperature range: 15°C to 70°C (59°F to 158°F) Typical measurement time: 15 seconds Power supply: 110-240 V, 50/60 Hz With RS-P42 printer Equipment tested
Used Bag-in-Box GANDRA TEC 500+ : 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit juices, vegetables, wines, etc. Supported packages: 3L, 5L, 10L, 20L. Bag Entry It is done automatically from the tape or manually. Vacuum generation and nitrogen input after pouring are standard. Equipped with a bag counter and a liter counter. Picking up the filled bags into the machines is done manually. Manufacturer: Gandra Model: TEC 500+ Year of manufacture: 2017 Recently, she poured NFC apple juice Capacity: Up to 500 bags with a capacity of 3 liters per hour • 400V/50Hz power supply; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW
table diameter: - mm table load: - t table height: - mm Control: - total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m CNC Swivel Rotary Table/ CNC Dividing Apparatus incl. Tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 420 mm turning length: 600 mm control: Sinumerik 810D spindle turning speed range: 4200 U/min spindle motor: 18 kW spindle bore: 65 mm x-axis: 210 mm z-axis: 610 mm greates pass round over bed: 600 mm swing diameter over slide rest: 360 mm tailstock travel: 500 mm tailstock quill taper MT: 4 dimension of workpiece: dia 200 x 520 mm total power requirement: 20 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 x 1,9 x 1,9 m - CNC control Siemens Sinumerik 810D - 12-position turret (VDI 30), driven tools 4000 rpm - Main spindle - Tailstock (MK 4) - C-axis - Coolant device - suction unit - Chip conveyor Machine has mainly processed plastic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: mm turning length: mm swing diameter over bed slide: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand Takang Machine no D895 Type TR1200x6000 Year of make 2015 Oil country Lathe Distance between centers 6.000 mm Center height 600 mm Turning diameter above the bed 1.200 mm ø Turning diameter above the support 890 mm ø Passage 150 mm ø Bed width 560 mm Glasses 400 & 550 mm 4-Jaw Chuck 1.000 mm ø Digital readout Heidenhein Power on the top support Rapid traverse along and transverse movement 3 lane bed Machine size (lxwxh) 8.500 x 1.700 x 2.300 mm Machine weight 13.800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3200 mm, 750 mm, 695 mm
Basic machine data Used 5-axis machining center from HEDELIUS Make: HEDELIUS Type: Tiltenta 7 Magnum Year of Make: 2016 Condition: very good Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain Travel: x-axis: 3200 mm // y-axis: 750 mm // z-axis: 695 mm Technical data: • Spindle: 50-12,000 rpm • SK40 interface • Fixed machining table with integrated NC rotary table • Ø table: 750 mm • Max. workpiece weight: 800 kg • B-axis infinitely variable: + 98°/- 98° • 50-fold tool changer • Max. tool length: 330 mm • Feed speeds: up to 40 m/min • IKZ (internal coolant supply) • 500 L tank with paper belt filter • Chip conveyor Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.
Used spindle moulder PAOLONI mod. T160L Long tops Removable front guide spindle moulder guide with total movement by means of a handwheel Folding spindle moulder guide Swivel support for advancement Hanging control panel Motorized spindle lifting interchangeable shaft Year of manufacture 2003 EC
Tünkers Liliput 210 banding machine; cleaned and tested; Working width 210mm; suitable for cold glue; Speed adjustable. Gluing machine Tünkers Liliput 210; cleaned and checked; working width 210mm; used for cold glue; adjustable in speed.
: 1200 mm : 580 mm : 600 mm : 1575x425 mm : SK 40 : 152 mm : 110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 121P3-20-FSH Refrigeration Machines, MTA S.p.A. TAEevo Tech 121P3-20-FSH are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 255 ltr., built-in P3 circulation pump, electric frost protection and a condenser pressure control (winter package -20°C). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 35 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 5.96 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 19 Max. Current (A) 33 Starting Current Circuit (A) 165 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm) ...
used
Key data: 90 mm
A first-class extrusion recycling brand EREMA Series Type 1109 TVEplus ecoSAVE for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Output up to 450 kg/h, electrics 240/400 volts, 50 hertz, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827
maximum number of results exceeded
please refine your search
