128,855 used machines on RESALE, but how to find them? Machine Search
maximum load capacity with horizontal planing disc 60 tons, maximum load with vertical planboard 90° at a load center of one meter 30 tons – with a load center of two meters 19 tons.
horizontal steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater Volume: 35,000 L Dimensions: Ø 2.50 × 7 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
maximum load capacity with horizontal planing disc 60 tons, maximum load with vertical planboard 90° at a load center of one meter 30 tons – with a load center of two meters 19 tons.
horizontal pressure tank, steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater Volume: 32,000 L Dimensions: Ø 2.50 × 7.0 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485 E-mail: kontaktscholten-tanks.de
horizontal steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater Volume: 32,000 L Dimensions: Ø 2.50 × 7 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
Steel tank with inner coating (epoxy resin) Can be used above or below ground, e.g. as a firefighting water tank or rainwater tank Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
Steel tank with inner coating (epoxy resin), with two domes Can be used above or below ground, e.g. as a firefighting water tank Volume: 22 m³ Dimensions: Ø 2.60 m × 4.50 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
Steel tank with inner coating (epoxy resin), with two domes Can be used above or below ground, e.g. as a firefighting water tank Volume: 22 m³ Dimensions: Ø 2.60 m × 4.50 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
Trough length approx. 7300 mm Trough width approx. 280 mm Trough depth approx. 400 mm Inlet approx. 640 x 280 mm Spout approx. 320 x 280 mm Taker distance approx. 160 mm Taker width approx. 180 mm Chain gears Drive gear motor SEW-Eurodrive R67-DVE100M4 230/400 V; 8.0/4.6 A; 50 Hz; IP54 Power: 2.2 kW; 1455/62 rpm Total approx. 7400 x 750 x 1000 mm
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 92cm Width: 164cm Height: 150cm Electric power: 1.5kW Delivery time: After the payment, from the stock
Type: MAX 500 Max. product weight: 500 кg. Drum diameter: 1000 mm Machine dimensions in mm: Width: 1600,0 Lenght: 3100,0 (incl. loading trolley) Height : 2300,0 Unloading height: 750,0 mm. Vacuum pump: 40 m3/h Power: 4,0 kW Voltage: 3х400 V, 50 Hz, 8,0 A Weight: 760 кg.
EUROLUX ZKG Tanks/ Storage Tanks / Pressure Tanks/ Beer Tanks with cone floor with cooling jacket made of V2A Max operating pressure: 0.99 bar, test pressure: 1.5 bar Content: from 200 litres to 1,000 litres Kat No. 20-00071-1L 200 litres 20-00071-2L 300 litres 20-00071-3L 400 litres 20-00071-4L 500 litres 20-00071-5L 625 litres 20-00071-6L 750 litres 20-00071-7L 1,000 litres Material: V2A - AISI 304, 1.4301 Surface: outside marbled, inside 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with downward drawn filling pipe DN 32 with fermentation connector (with overpressure valve, with manometer) with 2 x thread connection DN 50 with CIP spray head/CIP cleaning (on extra charge) with cap nut DN 50 ball Ø 25 mm with connection for cleaning supply ...
Brewhouse Tank Farm from 15hl / brew Craft Brewery Complete tank farm / cold block from the 15hl/brew craft brewery, made by Estonian Torsteel in years 2014 – 2016. Tanks are made of AISI 304 and they are insulated pressure tanks. All CCTs have two cooling zones on both sides of the tanks and one cooling zone in cone, BBT has two cooling circuits on side and yeast tank cooling zone is on side of the tank. Tanks are equipped with pressure safety valves, CIP bowl, zone specific temperature sensors, manholes, sampling taps, filling and emptying valves. Tank temperatures is automatically controlled from common control panels. The following tanks are available - CCT 14 x 3000 liters net, working pressure 1.5 - 3.0 bar - CCT 2 x 1500 liters net, working pressure 3 bars - BBT 1 x 3000 liters net, working pressure 1.5 bars - Yeast tank 1 x 300 liters,
Tempering device Hahn Automation Built: 09/2010, occasionally worked Weight: 600 kg Heating: 2x 24kW , 80 A Pumps: 2x 3.0 kW , 20 A
Tuna Packing and Seaming Line: A complete, automated system for tuna packing and seaming, composed of the following high-performance equipment: De-palletizer for Empty Can Feed: Efficiently separates and feeds empty cans for the packing process. View details Magnetic Elevator: Transports cans using magnetic technology, ensuring smooth and secure handling throughout the production line. View details Tunipack GFDC Tuna Packing Machine: Fully automated tuna packing machine, designed to efficiently pack tuna in a 150 mm format, ensuring optimal packing speed and precision. View details Hermasa Transporter with Brine Doser: A reliable transporter system, integrated with an automatic brine doser to ensure precise application during the packing process. View details Oiling Machine for Fish Canning: Specialized machine for the uniform application of oil to fish, enhancing the preservat ...
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 120cm Width: 200cm Height: 200cm Electric power: 4.5kW Delivery time: After the payment, from the stock
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 100cm Width: 185cm Height: 160cm Electric power: 2.2kW Delivery time: After the payment, from the stock
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 93cm Width: 140cm Height: 140cm Electric power: 1.5kW Delivery time: After the payment, from the stock
Trough chain conveyor TKF Redler up to 120 to/Hused Trough width inside approx.: 300 mm Trough depth inside approx.: 320 m Trough length approx.: 6800 mm Inlet opening approx.: 300 x 400 mm Exhaust opening approx.: 300 x 600 mm Taker distance approx.: 130 mm Drive motor NORD 220/380 V, 1.5 kW, 1410/18 rpm by replacing the engine, power can be increased Total length approx.: 6900 mm Other names: TKF, Reedler, Chain Conveyor
Capacity: 6000 kg Plate dimensions: 1500 x 1500 mm Tilt ingesmitating range: horizontal to - 145° Rotation speed: 0 - approx. 1 rpm electr. Connection: 400 V, approx. 5 kW Space requirement: 2800 x 2350 x 3250 mm Weight: 5000 kg
Technical data: - Load capacity 8000 Kg - 3 stop chains variable with hoe load capacity each 5000 Kg - 2 x chain length with hoes max. approx. 500 mm - 1 x chain length with hoes max. approx. 2000 mm - 1 x arm length approx. 750 mm - 1 x arm length approx. 1200 mm - 1 x arm length approx. 1400 mm - Mounting arms adjustable on the side - Mounting bracket adjustable in grid - Traverse dimension approx. L 1800 x W 2200 mm - Weight with chains approx. 550 Kg
properties: Used telescopic belt conveyor Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Color: Red 6 pieces in stock Price per piece Technical Data: Manufacturer: Budde Built: 09/11 Model: TGF02 hydraulic height-adjustable Total length retracted: 5,000 mm Total length extended: 11,500 mm Total width incl. control cabinet approx.: 1.240mm Total width: 950mm Belt width: 600mm Condition: good (used) Belt type: Smooth 4 pieces: built in 2008 2 pieces: built 2009 telescopic belt conveyor The telescopic belt conveyor is ideal in the picking zone for interlocking machines or workstations and to optimize the internal flow. During transport, the telescopic belt conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed or ...
Product number: 1949U Handtmann portioning device for ground meat Type: GMD99-2 Serial number: 1189 Year of construction: 2005 Air pressure: 7 Bar Tramper denester Type: D-3100 Serial number: 002 Year of construction: 2011 Capacity: 20 - 30 cycles/min. Dye: 5x R24, 3x R15 Air pressure: 6 Bar Dimensions: 3250 x 2200 x 2000 mm Weight: 310 kg Tramper tray filling system Type: TAS01 Serial number: 001 Year of construction: 2011 Dimensions: 5200 x 850 x 1600 mm Weight: 900 kg Tramper traysealer Type: S-460 Serial number: 001 Year of construction: 2012 Trays: R15 & R24 Capacity; max 15 cycli/min. Air pressure: 6 Bar Dimensions: 3100 x 1450 x 2150 mm Including 2 tool trolleys For vacuum and gas flush Including Witt gas mixing station
Offer via gebr. Thread cutting machine with pipe saw RA21 Made GEORG FISCHER type KM2, built 1997 Technical data: Thread diameter 3/8" - 2" Power connection 200 - 240 V / 50 Hz With mobile undercarriage with threaded cutting jaws 3/8", 1/2", 3/4", 1", 11/4", 11/2",2" used, in good condition.
Year built 2004 OTHER TECHNICAL DATA POWER OF ROTATING TOOLS 4 Kw MACHINE EQUIPMENT Tool holder set supplied DIMENSIONS AND WEIGHT Length 3000 mm Width 2500 mm Height 2010 mm Weight 6700 Kg
BIGLIA SMART TURN B1200 CNC automatic lathe was built in 2008 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, dedicated to the precise, multi-axis machining of workpieces with a maximum diameter of 580 mm, was created as an effective answer to the daily challenges of modern business. For this purpose, it features modern components with excellent technical characteristics inside a large work space, such as two spindles (main spindle and sub-spindle) and a 40-position tool magazine. The high-speed operation of the tool magazine further significantly speeds up production time and reduces machine downtime to a minimum. The SMART TURN B1200 S CNC turning center is offered with a wide range of equipment, including a bar feeder, Y-axis and FANUC intelligent CNC control. The total weight of the machine is 7000 kg. Technical specifications of the BIGLIA SMART TURN B1200 CNC lathe Gene ...
GILDEMEISTER TWIN 65 CNC automatic lathe was built in 2005 in Germany by GILDEMEISTER Drehmaschinen GmbH. The machine is used for precise, multi-axis machining of workpieces with complex geometries. To increase overall production efficiency, a combination of two spindles and two 12-position turrets with excellent technical specifications are used inside the large working area. Both spindles feature a C-axis with a high indexing accuracy of ± 0.002 mm, which facilitates complex machining operations that require precise positioning of the workpiece. All this is complemented by an intelligent SIEMENS CNC control with an intuitive interface. The GILDEMEISTER CNC turning center weighs 10000 kg. Technical specifications of the GILDEMEISTER TWIN 65 CNC lathe General data - number of axes: 8 (X1, X2, X3, Y1, B, Z1, Z2, Z3) - feed in the X1/X2/X3 axis: 300/180/175 mm - feed in the Y1/B ax ...
Rapid Original TRM 350 Quick Release Holder type TRM350 Indexing 0.005 With 7 alternating necks 4 Pcs 201/350 34mm 1 St 202/350 Prima 32mm 2 Pcs 216/350 Diameter 50mm
Tube filling and sealing machine for PE, laminate and metal tubes Power up to 3,700 tubes /hr depending on
Leybold Turbovac TMP 600C with CF DN160 inlet flange.
Lathe was bought fully reconditioned from a reseller in 1996 and has been used since 2010. Mechanically is in good conditions, NC is to be checked.
3x RFID Tunnel, Sick, ideal for recording contents and quantity, e.g. in cartons – used - Price per piece ex location (net): 13.950.-€! Manufacturer: Sick Year of Make: 2016 Type: TTS080-B6M01X000MXX0FK00 P/N: 1 123 631 S/N: 2146 2762 and 2145 2783, third serial number to be entered Tunnel width: outside approx. 74cm / inside approx. 56cm Tunnel length: approx. 1.37m Belt Conveyors: Strap width: approx. 49cm Element width: approx. 52cm Element length: approx. 5.10m Condition: good Available: immediately Location: Unna Gain insight into boxes and check contents and quantity without having to break open packages. Since verifying the shipment is crucial to ensure customer satisfaction, ensure that your customer receives exactly what they ordered with an RFID tunnel system. This system ensures that the ordered goods are delivered to minimize expensive returns. ...
Semi-automatic tube filling and closing machine for metaltubes including: - Tube D.35 format set - Coding device on one side - Tube feeder and tube alignment by hand
Ref.Nr 00880 Name of the 3D FIBER laser tube cutting machine Manufacturer Bystronic TTM Model TTM FL170 Year of construction April2018 Laser Lessons 22630 h Options: System for 3D cutting 8500mm Pipe Payload - Rear Pipe single loader from the front 8500mm Condition Good condition Specifications: Smallest pipe length in automatic feeding 3100mm Largest pipe length in loading 8500mm Max. pipe weight 25kg/m Cross-sections Round, square, rectangular, oval, etc Dimensions round cross-section (min./max) 12mm 168mm Dimension square cross-section (min./max) 15x15mm 120x120mm Rectangular cross-section (min/max) All rectangles that fit into a circle of 168mm Travel distances laser cutting head Y = 375 mm Z = 390mm Max. linear speed of the mandrels 130m/min Speed of axis of the cutting head Y = 100 m /min Z = 100 m/min Rotary movement of the Mandrels M ...
We can offer TMT FDY spinning lines, manufactured by TMT, Japan in 2012, Melt spinning lines,from melt PET inlet to winder.each inlet spuuly 3 beams, each beam has 2 positions, spinneret diameter 100mm, pitch 1400mm, redial blowing quenching, each has 4 hot gidets, 230X450mm, TMT ATi-615/32 winder, twins winder,chuck 1500mm,
Tool Revolver 8-speed Mazak Quick Turn 10N Machine used, good condition from assembly of a MAZAK Quick Turn 10N CNC lathe My. 1985 satted with 8 tool-places Turret 290 mm Space requirement LxWxH: 580 x 460 x 380 mm Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8904
Bosch Turbo Scara SR6 Swivel Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and load capacity (up to 8 kg), the robot is predestined for assembly work and fast pick & place movements. The turboscara SR6 and SR8 are swivel-arm robots (Scara robots) with four axes and the following advantages: • Minimal cycle time with maximum precision • Large working area and different lifting distances • Defined mechanical interfaces • PC control with a wide range of communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS program ...
Used HB-Therm tool temperatureizers, W-90, AW-90, CW-90, SW-90, SW-140 for sale. They have an output of 6-15 kW, for 90-140C of water.
Key data: 95 , 9
Used Tool-Temp tool temperaturelers, TT-156E, TT-157E, TT-162E. They are wet, 95°C, 9-12 kW.
Ø max. of the piece: 2200 mm Ø clamping of the table: 2000 mm Maximum load on the table: 12000 kg Maximum height of the piece: 1200 mm RAM Stroke (Z): 720 mm Main engine power: 55 kW
platform diameter: 1450 mm (HYDRAULIC - hydraulic spindle) maximum diameter of the piece: 1650 mm maximum height of the piece under the crossbar: 1200 mm - under tool holder: 1000 mm maximum workpiece weight: 11000 Kg mobile crossbar running on the plinth: 900 mm fast movement speed: 400 mm/min. slow displacement speed: 100 mm/min positioning accuracy on the base: +/- 0.1/100 mm main drive engine power: 60 KW platform advancement range: 2-280 rot/min number steps speed change box 3 work support stroke (X-axis): 1542 mm vertical stroke work support sled (Z-axis): 1200 mm sled section: 250x250 mm Milling shaft cone: ISO 50 milling engine power: 22 KW milling shaft speed range: 20-2000 rot/min X-Z axis work feed range: 1-4000 rot/min fast forward: 6000 rot/min C axis feed (slow-regimo milling rotation): 1-360 °/min X, Z, C: 45 N ...
CN FAGOR 8055-T Machine equipped with quota viewers, turret 2nd pentagonal wagon Spindle diameter 2,000 mm Maximum turntable height 1,310 mm RAM stroke 1,000 mm Maximum diameter 2,200 mm Spindle Max Speed 150 rpm Nr. 3 wagons type 1 RAM 1 turret 1 side Main engine power 52 kW
Ø board: 1250 mm Maximum turnerable: 1500 mm Useful height: 1355 mm Vertical crossbar stroke: 800 mm Ram vertical stroke: 1000 mm Toolholder number: 15 Table pruned: 12000 kg CNC Tesla NS 642 C Fast: 8 m/min Power: 40 kW Weight: 27.2 ton
Rotary tablet press without machine signs with 2 stamp sets 12 and 14 mm 22 kg per hour, with powder mixer both are functional
completely stainless steel loaded : 50 to 55% 3.7 kW with vacuum pump with filters Dimensions (L x W x H): ± 2,300 x 1,700 x 1,800 mm
General Manufacturer: Spinner Type: TTC300 65SMMCY Control: Siemens 840D SL ShopTurn Year of Make: 2015 Travel X1 / X2 / Z / Y: 180 / 110 / 450 / +40-40 mm Rapid traverse X1 / X2 / Z / Y: 15 / 15 / 15 / 24 m/min Turning Spindle 1 Speed: 4,000 rpm Chuck size: 250 mm Spindle passage: 52 mm Spindle power S1 / S6: 21 / 27 kW Torque S1 / S6: 201 / 258 Nm Turning spindle 2 Speed: 7,000 rpm Chuck size: 130 mm Spindle power S1 / S3: 6 / 8.5 kW Torque S1 / S3: 49 / 68 Nm Revolver Number of tools: 12 + 12 (BMT45) Rotating Tools: 12+12 (BMT45) Speed: 6,000 rpm Power S1 / S3: 2.3 / 3.5 kW Torque S1 / S3: 7 / 11 Nm Dimensions and weight Dimensions: 2,700 mm x 1,900 mm x 2,165 mm Weight: 5,100 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: IKZ 50 bar with belt filter system Parts Conveyor Belt w ...
maximum number of results exceeded
please refine your search
