t cork used for sale

used shared shop oven Wachtel Piccolo I-5 DMS 3 Master Timer from year of construction 2011 is immediately available for sale in the warehouse in Bielefeld. The furnace is tested for function and cleaned. -5 floors each 60x80cm -each floor with separate control -each floor with upper and lower heat separately adjustable -each floor has its own steam box for steam -each floor with security viewing glass door -with exhaust air hood -with proofing cabinet -Year of construction 08/2011 -electrical power supply 26.9 kW -400V AC/3Ph/N/PE/50Hz Dimensions: Width: 97cm Depth approx. 134cm Height: 237cm

-electric stone slab oven quail -Model Piccolo I-6 -Control DMS 3 m. Clock Timer K -6 floors each 60x80cm -each floor with separate control -each floor with top and bottom heat separately adjustable -each floor has its own steam box -each floor with security viewing glass door -with exhaust air hood -with proofing cabinet -Year of construction: 11 / 2011 -electrical power supply 31.1 kW -400V AC/3Ph/N/PE/50Hz Dimensions: Width: 97cm Depth approx. 134cm Height: 234cm

We offer Doka Eurex 30-top 400 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 30 top 400, used - 59,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The robust and durable Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and corresponds to column classes D, B/D or C/D according to standard EN 1065. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/95623 ...

Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.

Didar Part Number 0697210002 NSN 12-334-9607 Original Part Number 0020984020 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 17 Lt. Amount of Air Outside the Pipe 63 Lt.

We offer Doka Eurex 20-top 400 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 20 top 400, used - 49,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The robust and durable Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and corresponds to column classes D, B/D or C/D according to standard EN 1065. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/95623 ...

Didar Part Number 2605710003 NSN 12-A08-6397 Original Part Number 0030983220 In-Pipe Water Pressure 3.5 – 8.5 bar Out of Pipe Air Pressure 3.5 – 4 bar In-Pipe Water Temperature 95 °C Outside Pipe Air Temperature 215 °C Amount of Water in the Pipe 24 Lt. Amount of Air Outside the Pipe 45 Lt.

Didar Part Number2600208001 NSN 2930-12-A01-6407 Original Part Number 0030983920 In-Pipe Water Pressure 6.0 – 9 bar Out of Pipe Air Pressure 3.3 – 5 bar In-Pipe Water Temperature 95 °C Outside Pipe Air Temperature 225 °C Amount of Water in the Pipe 4 Lt. Amount of Air Outside the Pipe 14 Lt.

CL20 gear pump manufactured by TALLERES PUJOL.

Didar Part Number 2605710001 NSN 12-A01-7491 Original Part Number 0010989720 - 0000985320 In-Pipe Water Pressure 4.5 – 8 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 7 Lt. Amount of Air Outside the Pipe 25 Lt.

Diaphragm pump made of Aluminum manufactured by Blagdon model 1A-AA-BB-TTS

Multi Panel, MP370 KEY-12 TFT, 6AV6 542-0DA10-0AX0, Siemens, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Didar Part Number 260057620 Original Part Number 362161 – 472046 In-Pipe Water Pressure 4 – 7 bar Out of Pipe Air Pressure 2 – 6 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 230 °C Amount of Water in the Pipe 58 Lt. Amount of Air Outside the Pipe 120 Lt.

for sale chocolate tanks Capacity 1000 liters and 2000 liters. Heating jacket Stirrer for thick chocolate mass I send photos at the client's request

Baldor Baldor TSNM 150-12-01

Didar Part Number 0697210001 NSN 12-334-8788 Original Part Number 0020984220 In-Pipe Water Pressure 3 – 4.5 bar Out of Pipe Air Pressure 4.5 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 10 Lt. Amount of Air Outside the Pipe 44 Lt.

Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.

: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of D153928 Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Didar Part Number 2600134944 NSN 12-163-2290 Original Part Number 5900980220 In-Pipe Water Pressure 3.5 – 7 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 12 Lt. Amount of Air Outside the Pipe 38 Lt.

Ser. No.: L. 09/31 // Fabr. No.: 0270180/1 Pockets : 4 parallel fold Format (mm): max. 297 x 420 // min. 148 x 210 Equipment / Additional information: With delivery A45/1A-DC Power 400V

all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute total power 8 kW air consumption ± 300 L / min. mobile with mould trolley variable speed 3x400v 50hz with bridge breaker dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg PLC control

Filling is established with a 2¨flow meter - FLOW 33 accuracy 0,5% 1.2 The machine is built with ΙΝΟΧ ASI304 1.3 The machine will come with a full closed cabin for hygiene 1.4 Closure of bucket with film per kg & UV lamp 1.5 Automatic conveying per kg 1.6 Automatic over cap Applicator for 2,5 & 5 kg 1.7 System for CIP connection 1.8 Control panel with touchscreen Siemens IP65 and PLC Siemens, immediate choose of kg .The change over is immediate and needs no handling 1.9 Capacity 4,5t/hour on 5kg 1.10 ΗΕΡΑ filter in cabin 1.11 Stainless steel lobe pump OMAC Type : ΒΕ 220 Machine dimensions: Length : 5 meters Width : 1 meter Height : 230 meters

Description Transnorm curve belt – curve belt conveyor 180 YOC 2008 Angle 180 Head difference 400mm (by adjustable feet) Bandwidth 600mm Nominal radius 600mm Width of the curve outside (distance from edge to edge) 187cm

Kuper Veneer Zigzag Veneer Composition Machine, Type FW/ 1200-E Year of manufacture 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely adjustable zigzag width of the glue thread cutting device veneer thickness : 3.0 mm min. veneer thickness : 0.3 mm Glued thread with hot air heating Compressed air generation Discus for transporting the veneer over the veneer table Control via foot pedal Feed Speed: 35-60m/min Voltage: 400 V, 50 Hz Total power 1.35 kW Working height 915mm Bzunfcilke Weight approx. : 440 kg Dimensions : 2,12m x 0,73m x 1,55m

Inv. Num. : 3861 Type: L-K 120-3100 TSI Producer: SAFAN Created: 2002 Parameters: Control system: SAFAN Pressing force: 1200 KN Bending length : 3100 mm stroke: 180 mm Dimensions: 4200 x 1650 x 2775 mm Machine weight: 8700 kg

Scattering unit Scattering BM Tec - with 2 satchels (on both sides) - Running tables individually removable - completely in stainless steel - can be driven on castors - 4 seed containers - with rack trolley for storing the running tables

Grain cleaning Schmidt Seeger TAS 206 Capacity 200 t/h Wheat, spare sieves etc.

Semitrailer tractor, manufacturer Renault Trucks, YOC 2005, Hbz. Premium, zul. total mass 18000 kg, Displacement in cm³ 10837, Diesel, 522'tkm, IR 2006

PFM Flow wrapper Model: Tornado-BBLDSS Serial: C-6096 2001, Stainless, The Tornado LD is a horizontal flowrapping machine that produces up to 100 packs/min with hermetic seals from a flat reel of heat seal wrapping material. The Tornado LD is specifically designed for M.A.P.” (Modified Atmosphere Packaging). with smartdate X40 coder, infeed length 2400mm, flow wrapper length 3200mm, jaw width 220mm, various belt for infeed, 3Ph

sheet width: 2035 mm plate thickness: 6 mm distance between columns: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.