t cork used for sale

Standing stainless steel tank with flat bottom Volume: 40,000 L Dimensions: Ø 3.00 × 6.00 m high The tank can be equipped with a new agitator or pump on request. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Mitsubishi Heavy Industries Ltd Type - SC1F ( Single Cylinder Single Flow ), Condensing Steam Turbine Power : 205.440MW HP Steam : 85 ata, 538 C LP Steam : 5.5 ata 193 C Steam Turbine Generator Model : MB-H Power - 241, 680 KVA Voltage - 16.5KV, 50 Hz

heavy 40s Gillardon with cross table

Standing steel tank with inner coating Suitable for; Extinguishing water or rainwater Volume: 70,000 L Dimensions: Ø 3.00 × 11 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing steel tank with inner coating Suitable for; Extinguishing water or rainwater Volume: 70,000 L Dimensions: Ø 3.00 × 11 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Manufacturer: Green Transfo Type: Minera MP Year of manufacture: 2024, unused Number of units available: 9 pieces Rated power: 7000 kVA Rated voltage: 30 / 0.72 kV

horizontal steel tank with inner coating Suitable for; Extinguishing water or rainwater On request, the tank can be provided with an anti-corrosion coating. Fire brigade connections (A-coupling, suction line), inlet and overflow, new dome DN625 can also be ordered. Volume: 45,000 L Dimensions: Ø 2.80 × 7.70 m long Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Control Siemens Sinumerik 840D Bar passage 65 mm Speeds 5,000 min-1 2 x 12-speed revolver with attached revolver Competition. Turret 1 with Y-axis Parts collection facility Belt filter system Conveyor Bar loading magazine IRCO Profimat

horizontal steel tank with inner coating, pressure tank Can be used underground and above ground Volume: 35,000 L Dimensions: Ø 2.50 × 7 m long Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Steel tank with inner coating (epoxy resin) Can be used above or below ground, can be used as a firefighting water tank or rainwater tank Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Steel tank with inner coating (epoxy resin), with two domes Can be used above or below ground Volume: 22 m³ Dimensions: Ø 2.60 m × 4.50 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Steel tank with inner coating (epoxy resin), with two domes Can be used above or below ground Volume: 22 m³ Dimensions: Ø 2.60 m × 4.50 m long On request and depending on demand, the tank can be equipped with a brand-new dome, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Steel tank with inner coating (glass enamel) Can be used above or below ground Volume: 8.4 m³ Dimensions: Ø 2.20 m × 2.50 m long Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Steel tank with inner coating (glass enamel) Can be used above or below ground, e.g. as a rainwater tank Volume: 8.4 m³ Dimensions: Ø 2.20 m × 2.50 m long Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Used machine, Woma Twinjet 550 Z - 250 M Working pressure: 550 Z, P35 1,300 bar-143 lpm, 250 m, P18 2,500 bar-31 lpm Year of construction 2014 Drive: electric 500 kW Operating hours: approx.: 1,305 h, 3 gun Control , and accessories

Steel tank with inner coating (glass enamel) Can be used above or below ground, e.g. as a rainwater tank Volume: 8.4 m³ Dimensions: Ø 2.20 m × 2.50 m long Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Key data: 100 °C

Tool temperature control unit - HB-Therm HB-100Z1 Years of manufacture: 2013 and 2014 Description: Max. heating capacity - 100°C Heat transfer medium – water Heating capacity: 8 kW Cooling capacity: 30 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended Price: On request

Inv. Num. : 8204 Type: SK 12 Producer: TOS Created: 1953 Parameters: Max. turning diameter: 1350 mm Clamp plate diameter: 1180 mm Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

Manufacturer: Bell Maschinenfabrik Year of Manufacture: 1988/1989 Design: Horizontal Nozzles: 2 Flow Rate (Q): 2.1 m³/s Net Head (H Net): 209.5 m Power Output (P): 3750 kW Speed: 429 min⁻¹ Operating Hours: 285,000 by end of November 2024 Pelton Wheel: PN25 DN 700 The turbine is sold completely with bearing and control hydraulics, as well as turbine governor, controller, Pelton wheel, and housings, along with supply pipes. Spare runner (11,000 operating hours) is available. Optionally, the generator, including the turbine bearings from AvK, can also be taken over: 10.2 kV, air-cooled. Find more here - / Contact us at -

CNC Lathe REALMECA type T400 Travel X: 200 mm Travel Z: 600 mm Numerical Command: NUM 750 Between points distance: 700 mm Max machining diameter: Ø 210 mm Spindle speed: from 100 to 4000 RPM 12 tools Turret VDI 20 3-jaws chuck Ø 140 mm Year of construction: 1993 Spindle motor: FANUC Tailstock: CM4 Hydraulic Tailstock + Chuck Lubrification Voltage: 380 V Dimensions (L x W x H): 2500 x 1500 x 1700 mm Weight: approx 3 T

Rothenberger Robull Type L Hydraulic Pipe Bending Machine Larger, Sturdier Version Think it's type L. The number on the nameplate begins with L. The version that you can still buy at the moment is smaller and the bending glasses at the front are not so stable. Good used condition, full function, without the tripod foot. This is available to buy at Rothenberg, or simply build it yourself. Total weight 68 kg. Further dimensions can be found in the pictures. Shipping is done on several packages due to the weight

Industrial Processing Tank – 19,517 L Working Capacity (2006) High-capacity industrial processing and storage tank designed for hygienic handling of liquid food products in beverage and dairy processing environments. The tank offers robust construction, high temperature tolerance, and pressure capability suitable for modern production lines. General Information - Year of Manufacture: 2006 - Condition: Used, operated only for a short period Capacity - Working Capacity: 19,517 liters Technical Specifications - Maximum Pressure: 4.0 bar - Maximum Temperature: 145 °C Dimensions - Outside Diameter: 2,570 mm - Total Height: 6,830 mm Key Advantages - Large 19,517 liter working capacity - Suitable for high-temperature processing applications - Designed for pressure-resistant operation up to 4.0 bar - Ideal for dairy, beverage, and liquid food processing - Robust  ...

Control Siemens ... Sinumerik ONE Max. workpiece diameter ... 2200mm Table diameter ... 2000mm Max. table load ... 20000kg Max. workpiece height ... 1710mm Axis Z ... 1000mm Average of the sanding piece ... 180 x 200mm powered tools ... 15 Number of positions in the tool changer... 15 Main engine power ... 58kW L x W x H ... 6700x10400x6400mm Main motor power of driven tools ... 19.5kW Speed of driven tools... 8-3300 rpm Work feed ... 4000mm/min Rapid traverse ... 10000m/min Axis C ... 360° IKZ... 20bar Speed of the clamping plate ... 2-160 rpm Machine weight ... 32000kg Documentation Conveyor C Axis Coverage according to CE marking The machine has undergone a complete overhaul. More info on request. With 1 year warranty.

Inv. Num. : 8206 Type: WHN 13.4B Producer: TOS Created: 1986 Parameters: Control system: Mefi CNC 859 Work table length: 1600 mm Work table width: 1600 mm Maximum spindle speed: 800 1/min X-axis travel: 2000 mm Y-axis travel: 2000 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Machine weight: 32000 kg 2024: Complete replacement of lubricating oil dispensers Spindle bearing repair (new bearings) Replacing the engine with an overhauled engine

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

Key data: 45 mm, 1350 , 298 U/min

Single Screw Extruder Cincinnati Talos 45-30 G Year of construction 2009 + Corrugator Maintools MTC 60/90 Year of construction 2006 Both machines are in good condition, and immediately available

VA-11. Inhibitor System / Glycol Injection (B 640) Partial system, 1 tank functional, cleaned, Built: 1990 Complete system (pumps, control, etc.) Manufacturer: LEWA GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 1.25m; Length approx. 2.5m; Mass per unit 2.0t; Volume 2700 l Find more here - / Contact us at -

SNA-03. Other and Auxiliary Systems Air Technology Systems a) 1 unit Type Wolf KG 160/9391, functional, Built: 1991 b) 1 unit Type Wolf KG 40, functional, Built: 1991 c) 1 unit Type Eichelberger NSR 315, functional, Built: 1991, Rooftop system Manufacturer: Wolf Anlagen Technik GmbH Technical Data: a) 15,400 m³/h; 10 kW; 380V; 1500 rpm; 710 Pa b) 2,400 m³/h; 0.6 kW; 380V; 1500 rpm; 300 Pa c) 3,500 m³/h; 1 kW; 380V; 1500 rpm; 450 Pa Motors: a) 71M06 SIEMENS 1MA5163 4BB; 10 kW; 380V; 1500 rpm; 50Hz, Built: 1991 b) 71M08 Loher ENCV090 SB 84A; 0.6 kW; 380V; 1500 rpm; 50Hz, Built: 1991 c) 71M07 FLENDER ENGV160 MB02A; 10 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Find more here - / Contact us at -

2. Other and Auxiliary Systems SNA-06. Air Technology System, 2 units WOLF KG 100, functional, Built: 1991 Manufacturer: Wolf Anlagen Technik GmbH & CO.KG Technical Data: 6750/6050 m³/h; 15 kW; 1500 rpm; 650 Pa Motors: 65M01 Wolf UD112M; 4 kW; 380V; 1500 rpm; 50Hz, Built: 1991 65M02 Wolf UD112M; 4 kW; 380V; 1500 rpm; 50Hz, Built: 1991 65M03 Wolf UD100LB; 3 kW; 380V; 1500 rpm; 50Hz, Built: 1991 65M04 Wolf UD100LB; 3 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Additionally, 2 refrigeration compressors DWM Copeland, Built: 1992 Type DMRH 750EWM/000; Capacity 26.5 m³/h; 1550 rpm Find more here - / Contact us at -

2. Other and Auxiliary Systems SNA-17. Transformer Systems, Room K 14, Transformer 2 units Cast Resin Dry-Type Transformer Type GEAFOL TG 4951H, Built: 1990 Manufacturer: AEG Trafo Union Technical Data: - 800 kVA - Voltage level 10 kV / 0.4 kV - Dyn 5 Find more here - / Contact us at -

Transnorm roller conveyor 3170-900-850 RA2151 Make: Transnorm Roller width (RB): 850 mm Nominal/outer width (NB): 700 mm Length: 3170 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Gearmotor R17 DT71D4/TH Eletrical Data: 380-500 V, 0,37 kW Conveying speed (v m/s): 0,2 Height frame: 140 mm including Motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Construction year: 2008 nominal voltage: 380-500V Conveying length in mm: 3170 Nominal / outside width in mm: 900 Roll width in mm: 850 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,2 scope of delivery: including side guides without supports For individual, e ...

TO WHOM IT MAY CONCERN; WE VE 2 PCS USED REPORTED EXHAUST GAS TURBOCHARGERS ABB TPS 57 - D01 AT STOCK PLS FIND DETAILS ON BELOW TYPE TPL 57-D01 HT 466584 & 466585 N MAX 718 TMAX 650 nMAX 682 620 PLS FIND SERVICE REPORT ON FILES SECTIONS IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 abc.aliagamarine.com TURKEY

Inv. Num. : 8224 Type: W 100 Producer: TOS Created: 1972 Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm Taper: Morse Spindle diameter: 100 mm Equipment: Front panel DRO NEWALL

Inv. Num. : 8239 Type: WHN 13 CNC Producer: TOS Created: GO 2004 Parameters: Control system: MEFI X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel distances Z-axis: 1200 mm

Inv. Num. : 8232 Type: Twin 42 Producer: Gildemeister Created: 2002 Parameters: Control system: Siemens Sinumerik Switch-on hours: 80654 h Hours: 33758 h Maximum turning length: 650 mm Maximum turning diameter over bed: 250 mm Maximum turning diameter over support: 120 mm Maximum length of travel in the X-axis: 300 mm Max. travel length of the Z-axis: 650 mm Maximum spindle speed: 7000 1/min Length: 4770 mm Width: 2220 mm Height: 1950 mm Weight: 5500 kg Equipment: Powered tools Bar Feeder

Sliding table saw ALTENDORF F 25, type 1 exhibition machine double trolley swivel man. Height and swivel adjustment Rip fence with man. Fine adjustment angle mitre stop Extraction hood large scoring Basic with LED lighting ---------- Technical data ---------- Swivel range: 0 - 46 Â carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ã: 315 mm Cut-to-length fence extendable to: 3,450 mm Speeds: 3,600 / 4,200 rpm Engine power: 5.5 kW (7.5 hp) Ar

Favretto 500, Rotary table surface grinding machine, horizontal spindle, dia 500mm, electric elettrico with DRO

Key data: 250 °C, 8 kW

This temperature controller can heat up to 250 degrees with oil medium. It can also be used for injection molding tools, extruder screws, and metal processing machines. Everything works perfectly. Pump, heating, heat exchanger and control are good. I have 1 of these, but there are also other types of temperature controllers for lower temperatures and other machines in the plastics industry. Please see my other ads.

Offer 23250 Specifications: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg -with - Pipe circular saw - Inside and outside tube end burr device - Pipe collaring device - Without tools

ABLEPick Picking tag AT-505 Rev 1.3 RA2336 S/N A17610000-2302 102AT505000004G V1.1 Product dimensions: 147 x 46 x approx. 20 mm Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Hersteller: Ablepick

description: High quality control unit for pallet conveyors of a 50.000 bph filling line with several KHS control units For a total of frequency controlled drives, diverse protective switch drives /see photos for details) Switchboard with 2 pieces The Danfoss inverters are overhauled and can be commissioned without concern. The software might be added as well. An andaptation to your project can be also offered Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept.  ...

Stock# U2452 Used stainless steel two decks tumbling screen by Allgeier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen.

Plant for filling and packaging aluminium tubes, consisting of: Tube filling and sealing machine IWK TFS 10: For aluminium tubes (double-fold, triple-fold) 10 tube holder stations Output 25 - 60 tubes/min For tube diam. 11-52 mm depending on tube holder format set Tube sheath length 50-250 mm Total tube length with cap max. 280 mm Dosing 2.0-400 ml depending on dosing pump 2 rotary valve dosing pumps, 2-30 ml + 50-150 ml 2 cam discs 2 filling nozzles, diam. 12 + 19 mm with anti-drip device Tube dispensing magazine Tube centring station Print mark control (alignment of the tube to the print image) Under-level filling 1-line embossing, with embossing numbers 1 filling funnel, heatable with electric heating, 1 single-walled filling funnel 2 tube holder format sets for aluminium tubes (diam. x total length) 16.0 x 100 mm + 25.0 x 163 mm Contactor contro ...

Type 210 standard 13 Shear: 13 mm Flat steel: 150 x 16 mm Punching:nbsp; example: dia 25 in 16 mm Stroke: 27 mm 50 ton Notching: 12 mm L/T steel: 80 x 10 mm U steel: 140 mm I steel: 160 mm round bar steel: 42 mm square bar steel: 38 mm L-profile 90°: 110 x 10 mm L-profile 45°: 90 x 9 mm Punching pressure: 50 ton Power needed: 3 kW Length: 1270 mm Depth: 800 mm Height: 2180 mm Weight: 2 ton

Capacity: 3,224 kW Volts: 400 HZ: 50 Condition: Very Good Scope of Supply: Complete Turbine Power Station with turbine and alternator, Control Panel, Condensor, Cooling Towers, Spilling Unit, Switchgear, Synchronisation panel, Transformer, Piping / wiring / pumps. Total cost for power plant components was around 3 million on the actual power plant components. Nominal Steam requirement to run the turbine is 17, 5 t/h at 29 barg & 350 °C. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.

Manufacturer: Translift, Year: ca.1995, Lifting power kg: 800, Length mm: 1300, Width mm: ca.850, Lifting hight approx. mm: ca 800, Total hight mm: 60, Pedal switch: yes, Hand switch: no, Sicherheitsleiste: yes, Carriage: no, Ausparung für Zinkenbreite 200 mm, Year :ca.1995

Manufacturer: Torwegge, Type: H634.1, Year: ca. 1996, Year :ca. 1996

Manufacturer: Celaschi, Type: TSA 520, Year: 1987, Maschinensteuerung: max. 290, Motore Maschine 1: 150, Magazine: 150, Schrumpftunnel: 2x3, Min.-max. workpiece height in mm: 5,5, Working hight min-max mm: 5,5, Cam distance mm: 5,5, Year :1987

Manufacturer: Trepel, Type: Hydraulikhubtisch, Year: 1972, Lifting power kg: 1000, Length mm: 2900, Width mm: 1700, Total hight mm: 300, Carriage: yes, built-on roller conveyor: no, FREE TEXT: ohne Schaltschrang inkl Hydraulistation, Year :1972