129,793 used machines on RESALE, but how to find them? Machine Search
turning diameter: 420 mm turning length: 1500 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 590 mm centre height: 210 mm Turning length in the bed bridge: 260 mm reus: 16 (45-1800) U/min tail stock: MK 4 quill stroke: 120 mm diameter of quill: 50 mm spindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mm spindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/min feed: plan 17 / 0,025 - 0,85 m/min total power requirement: 4,6 kW weight of the machine ca.: 1340 kg dimensions of the machine ca.: 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range ...
x-travel: 480/500 mm y-travel: 230/250 mm z-travel: 380/400 mm speeds: 45 - 2240 U/min table surface area: 1000 x 250 mm tool taper: SK 40 control: HEIDENHAIN TNC 124 total power requirement: 3 kW weight of the machine ca.: 1550 kg dimensions of the machine ca.: 2600 x 2200 x 1800 mm - horizontal + vertical milling spindle - Cooling device - swiveling table - Chip tray - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min - Rapid traverse X/Y/Z - axis 4000 mm/min - Control HEIDENHAIN TNC 124 - Operating hours: 4764 hours - Machine light - Machine feet - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1860 m³/h : Pressung 2.900 Pa : 1,1 kW filter surface area: 10 m² : 72 dB(A) : 400/50 V/Hz : 665 x 1100 x 1495 mm : 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system --------------------------------------- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class W3 (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good clean ...
sheet width: 1015 mm plate length: 1015 mm plate thickness: 6,0 mm Punching capacity: 25 t punch diameter: 88,9 mm total power requirement: 16 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: 4000 x 2320 x 2300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 28 mm throat: 250 mm bore stroke: 130 mm morse taper: 3 MK table:: 380 x 380 mm turning speeds: 75 - 3000 U/min engine output: 1,1 kW column diameter: 98 mm thread: M16 ST60 dimensions: 700 x 450 x 1500 mm weight: 200 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t stroke: 400 mm table surface area: Arbeitsbreite 1300 mm pressure: 243 bar oil volume: 64 dm³ ajustment speed: 5,73 mm/sec work speed: 1,84 mm/sec return speed: 7,08 mm/sec total power requirement: 3,0 kW weight of the machine ca.: 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5000 kg workpiece diameter: 250 - 2500 mm total power requirement: 0,75 kW table turning speeds: 100 - 1000 mm/min diameter of running wheel: 250 x 140 mm weight of the machine ca.: 800 kg range L-W-H: 2200 x 2500 x 800 mm - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm bending angle: 0 - 180 ° gas tube pipelines: 2 (60.,3mm) mm speed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kW weight of the machine ca.: 0,7 t - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
koop: Tuchenhagen Mixproof Valve 4'' Manifold GEA Order number: 7100.14 Voor meer informatie kunt u bellen of een e-mail sturen. Phone: 06-20758459 E-mail: wh.derikxgmail De prijs is exclusief 21% BTW.
turning diameter over bed: 400 mm centre height: 195 mm turning diameter over slide rest: 246 mm turning length: 650 mm spindle turning speed - stepless: 0-2500 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1.3x1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 850 mm y-travel: 500 mm z-travel: 450 mm table-size: 1250x500 mm spindle taper ISO: 50 spindle turning speed range: 35,5-1800 U/min weight of the machine ca.: 5.2 t HEIDENHAIN TNC-355 Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stainless steel bar belt for Technopool spiral cooler Length (linear metres): approx. 260 - 280 m Total width: 900 mm Working width: 760 mm Distance between rods: 30 mm Availability: as of now
core drilling diameter max.: 16 mm bore depth: 485 mm swing diameter: x mm table-size: 590x350 mm spindle turning speed range: 230-2300 U/min weight of the machine ca.: 0.4 t Table with digital read out Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW
Control: Manufacture: FANUC 18i-MB x-travel: 510 mm y-travel: 360 mm z-travel: 300 mm table surface area: 600 x 360 mm spindle turning speed - stepless: 12000 U/min dimensions of the machine ca.: 1400 x 2300 x 2300 mmxmmxmm weight of the machine ca.: 2.6 t tool piece magazine with: 24 Plätzen tool piece magazine with: 20 Plätzen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition
center hole: 2-50 mm workpiece diameter: 8-125 mm workpiece length - min.: 50 mm workpiece length - max.: 1000 mm column - center height: 145 mm grinding wheel speeds:: number: 3 from/to: 13000-45000 U/min spindle turning speed range: 400 U/min dimensions of the machine ca.: 750x850x1800 mm weight of the machine ca.: 475 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bar material dia.: 5 - 65 mm Bar length: 3000 mm feed length: max. 3000 mm voltage: 400 V weight of the machine ca.: 1,2 t dimensions of the machine ca.: 5,32 x 0,95 x 1,52 m serial-no.: 32 - 201 588 Loading magazine with lower storage area from which the bars are lifted into the Feed tube can be lifted Rod diameter 5 - 65 mm Feed force infinitely variable max. 550N Insertion speed 335 mm/sec feed speed 335 mm/sec Return speed 335 mm/sec Loading time for 3000 mm bars: 30 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 200 mm turning length: 635 mm control: SIEMENS 840D Powerline greates pass round over bed: 250 mm spindle turning speed range: 20-7000 U/min turret head: 2x 12 weight of the machine ca.: 10 t Y- & B- axes Misc. accessories more details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Paxman - 12RPHCZ MK 7 Turbocharger Holset Model 6 Completely overhauled Unit price! 2 pieces available !
Manufacturer: Bosch Model: TFC 5532 Year of Manufacture: 2016 Cups: 4 x 50g, 6 x 50g Designation: Forming Machine Technical Specification Bottom Foil Sterilization: Saturated Steam Top Foil Sterilization: Saturated Steam Bottom Foils: PS, PS-EVOH-PS, PS-EVOH-PE, PS Mono-Laminate foil, transparent and multicolored 1.05 mm Top Foils: Pet-Alu-Pet, 9-12-9 µm Filler 1: Viscous products without particles Filling range: 20 - 75 ml Filler 2: Liquid products without particles, hot filling 30-60°C Filling range: 20 - 75 ml Sorting Filler 1: Yogurt two-colored; pudding single-colored or with swirl/marble design Sorting Filler 2: Pudding or jelly single-colored Performance: 4 x 50g: 28 cycles equals 40,320 cups / h Punching: 4-set and 6-set punching --------------------------------------------------------------- Important Control Functions Cup Printing: Laser (not ...
Two similar Stanley riveting punches are available. Both machines include rivet dispensers ERF 23 and 23.1. An on-site inspection is possible.
Upstroke press Top lid can tilt open to allow mould to be (un)loaded Capacity: 150 ton Passage between uprights: 1850 mm Max ram adjustment: 500 mm Distance between table -- ram: 1000 mm Table area: 1800 x 1300 mm Height: 2350 mm
Spindle diameter 135 mm Morse 6 Attachment Cone Max. drilling depth in 1 pass 600 mm Min. distance spindle-column axis 485 mm Max. distance between spindle and mast axis 3,500 mm Min. distance from spindle to table 520 mm Max. distance from spindle to table 1,845 Min distance from spindle to plate - base 1,130 mm Max. distance from spindle to plate - base 2,455 mm Min drilling radius from column axis 820 mm Max. drilling radius from column axis 3,875 mm Max. drilling diameter 78 mm stroke 8,000mm stolle top 10.000X2.500mm
Hot runner controller - Mastip TC5 100-12-H-DHB-C-03 Year of manufacture: 2018 Description: 12 hot zones with wiring All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Used dissolver made by Teja, type: MW-4. The MW-4 type dissolver, is used in the paint and varnish industry to mix pigment pastes in typical transfer vats with a capacity of 250 to 1000 dm3.
Various metalworking machines are available. 1) Larger BBM guillotine shears, year of manufacture: 1995. 2) Nimak spot welding machine, year of manufacture: 1990s. 3) Roundel machine Schwartmanns, year of manufacture: 1987. 4) Smaller lathe Weiler, year of manufacture: 1966. 5) Table-top stud welder Soyer, year of manufacture: 2000s. 6) Freestanding grinding motor. 7) KSM deburring machine, year of manufacture: 1980s. 8) Larger Tox hydraulic stamping press, year of manufacture: 1990. 9) TES 15 hydraulic press, year of manufacture: 1972. 10) Single-column table press, year of manufacture: 1955. 11) Landert honing machine. On-site inspection is possible.
Used PP twine production line made by Roblon, type: T5000. Capacity ranges from 60 to 100 kg/h depending on twine thickness. THE LINE INCLUDES: - A 90mm diameter extruder with an inverter-controlled asynchronous motor, - A control cabinet with digital controllers, - A cast-in die head, - A longitudinal orientation oven for polypropylene rafi, - A single-reel winder, - A twister for winding finished twine balls, - A heating tunnel for shrinking the film on finished balls.
Fully automatic powder filling system, triple auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pnematics, HBM weighing sensor (Germany). 2 packaging modes: High speed or High Accuracy. Specifications: stainless steel (SS304) version | filling range: 10-500g | accuracy: +/- 0.3-1% (high speed mode), +/-1-2g (high accuracy mode) | suitable for: metal cans, glass bottles, plastic jar, cardboard cups, etc. | container dimensions: diameter 40-130, heig ...
Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). Twin version for faster output due to 2 complete production lines in one machine. The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | servo driven sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 902=180 cycles/min | bag sizes: L(40-300)xW(60-180)mm, (double film pulling possible for longer bags) | suitable film width: 140-380mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 3.9kW | air pressure: 0.4-0.8MPa | compressed air con ...
Vertical packaging machine for pre-made tubular film. The machine features a simple production process, as the tubular film only needs to be vertical-sealed. - Specifications: Bag dimensions: max. bag length 500mm, bag width 200-350mm | bag shape: pillow bag | suitable tubular film material: PE | suitable film thickness: 0.06-0.12mm | max. speed of the machine in neutral: 15 cycles/minute | stainless steel SUS 304 | 220V/0.4kW | 6bar, 0.6m?/min | machine dimensions: L880xW1150xH1170mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Packaging system for fully automatic dosing, filling and packaging of tea in tetrahedron tea bags. Dosing of the tea by an 8 head linear weigher included in the price. The tea bag packaging machine uses ultrasonic sealing technology to produce traditional tea bags or tetrahedron (pyramid shaped) tea bags. The tee bags are finally packed in an outer bag, 3-side-seal bag or center-seal bag. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | number of weighing heads: 8 | weighing range: 1~10g | accuracy: ?0.1g/bag | tea bag dimension: tetrahedron tea bag: 50-80 mm per edge, traditional tea bag: W(60-80)xL(40-80) mm | suitable film type: nylon, non woven, PET, PLA | film width: 140 mm, 160 mm, 180 mm | outer bag dimensions: W(80-120)xL(90-120) mm | power: 220 V, 1.5 kW | product contact parts from SUS304 | air pressure: 6 bar | dimensions of the packaging system: depe ...
Automatic Polyamide Triangular Tea Bag Packaging Machine, including volumetric cup filler. Discontinuous feeding Controlled by step motor. Bag forming method: Triangular seals by two sets ultrasonic sealing units. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | dosing system weighing scale (standard device): 1-5g | accuracy = ?0.2g | packing material: polyamide, PET mesh, non-woven fabric, any material can be sealed by ultrasonic | tea bag dimensions: triangular bag: 50-80mm | flat pouch: W(60-80) x L(40-80)mm | film width: 120mm, 140mm, 160mm | power supply: 220V, 1.2kW | weight 600kg | machine dimension: L1200xW900xH1800mm (subject to the final design). Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. ...
Carton Box Filling and Sealing Machine for e.g. filling of tubes in carton boxes, 1 item each. The fully automatic packaging process includes feeding of the products, erecting of the folding boxes, insertion of the product, closing and out feeding of the box.- Specifications: Dimensions of the folding box: L(55-220)xW(20-120)xH(12-70)mm | requirement carton/paper thickness of the box (min-max): 250-350g/m? | max. cycle of the machine in neutral: 80 cycles/min | power supply: 220V, 3P | compressed air and compressed air consumption: 5-7bar, 0,2m? | dimensions of the machine LxWxH: 3100x1100x1550mm | weight: 1200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks f ...
Brand Name: GOPEL Model: OPTICON THT 600 LINE Year: 2015 Serial Number: TH-603 Notes: - The machine is in excellent condition and in working order. - No CE manuals and declaration of conformity have been provided. - The goods being sold are declared out of service and with the obligation to restore safety in the devices relating to Legislative Decree 81/08 on machine safety. - PROPERTY INTENDED FOR VAT HOLDERS.
sheet width: 1050 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,40 t dimensions of the machine ca.: m - Shear angle adjustment - Motorized backgauge up to 1000 mm with fine adjustment via handwheel - Sharpened blades - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P73 Profile dimensions: 75 x 75 x 2.00 mm Incl. cross and diagonal struts, and footplates The stands are pre-assembled (screwed truss) Height: 3,800 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
x-travel: 3000 mm y-travel: 2500 mm z-travel: 1150 mm Control: 840 D Powerline tool taper: HSK-A63 table-size: 3000 x 2500 mm turning speeds: 16000 U/min total power requirement: 60 kW weight of the machine ca.: 50 t dimensions of the machine ca.: m - 5-Axis-Fräsmachine - max. rpm: 16.000 - X-Way: 3000 mm - Y-Weg: 2500 mm - Z-Way: 1150 mm - A-Axis: +/- : 100 mm - C-Axis: +/- : 181,5 mm - Tabelsize: 3000 mm x 2500 mm - option: Blowing air outside - kinematics: Clevis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle bore: 40 mm Tools speed: 30...500 U/min oscillation frequency: 5001400 DH/min : 60 kp accuracy +/-: 0,001 mm total power requirement: 6,4 kW weight of the machine ca.: t dimensions of the machine ca.: m - max. diam of work: 350 mm - max. diam for centerless work: 70 … 150 mm - max. worksize: d = 155 mm - work.length: max. 1000 mm - work.length,centerless: 300 mm - hole in spindle: 40 mm - speed of spindle: 30 … 500/ U/min // rpm - oscíllation frequency: 500 .. 1400 DH/min // DS per min - pressure: 60 kp - precision: 0,001 mm - load: 6,4 kW, 380/400~ - Spezifikation: Stock finishing tools incl. - high precision surface micro finishing of pistons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Countertop sweeper TRILETY used condition, see pictures Type LKM Sweeping body for Multicar vehicle Year of construction 1998 Dimensions: 330/190/190 cm Negotiation price: € 2.590,- net Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
tube diameter: 4-28 mm bending radius min.: 1,5 x D - 2,0 x D mm Control: Siemens LOGO delivery rate: 4,5 l/min bending angle max. +/-: 190 ° nominal pressure: 250 bar operating pressure: 3095 bar delivery rate: 4,5 l/min total power requirement: 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 4-28 mm total power requirement: 1,5 kW weight of the machine ca.: t dimensions of the machine ca.: m - bending type: 4-28 mm - bending angle: 190° (ohne Rohr) - bending radius: 1,5 x D – 2,0 x D - nominal pressure: 250 bar - operating pressure: 3095 mm n. re. - delivery rate: 4,5 l/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Tonello Model: Laser Blaze 250TN Year of Manufacture: 2011 aprox 1,4x1,4m garments, for denim fabrics Find more here - / Contact us at -
bending angle max. +/-: 180 + 10 ° tube: 4100 mm - Round tube steel up to 30 x 2.2 mm ² - Round tube stainless steel up to 30 x 1.5 mm - Square tubes 20 x 2.5 mm - Bending time 90 degrees: 1.5 sec (feed) - Length feed speed: 450 mm - Radius range max 125 mm - Free-standing bending head 850 mm long - Bending axis drive electrohydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 20 ...
Offer 25128 Specifications: - Rated power at 50% ED 25 kVA - Max. welding power 68 kVA - Adjustable projection 280 to 450 mm - Stroke 5 to 40 mm - Welding values of sheet steel approx. 3 + 3 mm - Electrode force adjustable up to 240 daN - Required air pressure 6 bar - Cooling water volume 4 l/min - Connection 400 V - Space requirement approx. W 800 x H 1700 x D 1050 mm - Weight approx. 220 kg - with: - Single-phase control T 90 Mark II - E. foot switch - Separate cooling water recooling unit
X,Y travel: 14.6" x U,V,Z Travel: 3.9" x 3.9" x 10.2" Max. workpiece size: 29.5" x 21.7" x 10.2" Max. workpiece weight: 880 LB Max. X, Y rapid traverse: 31.5 in/min Motor Drive System AC Servo Motor/Linear Motor Wire Diameter: 0.004" – 0.012" Max. wire feed: 11.8 in/s Wire tension: 0.44 – 5.52 lb taper angle : ±21°/4.33 inches (DA+DB=0.6 inches) Layout (W x D x H) 90.6" x 89.2" x 80.6
Sensitivity: ferrous metals: 2mm, non-ferrous metals: 3mm, non-magnetic stainless steel: 3.5mm. min. product dimensions X/Y/Z: 170mm/110mm/20mm, max. product dimensions X/Y/Z: 270mm/260mm/150mm, product weight min./max.: 100g/3000g, product distance: 300mm, speed: 20m/min, throughput: approx. 50 pieces/min. Machine dimensions X/Y/Z: approx. 1700mm/1500mm/1000mm, weight: approx. 100kg. Including discharge by air. On-site inspection is possible.
Double head lathe for milling and turning tubes Automatic (un)loading of workpieces nbsp;
maximum number of results exceeded
please refine your search
