system used for sale

For Sale: Complete Drum System for Zinc Electroplating Year of Manufacture: 2000 This complete setup includes all essential components for efficient operation: - Drum Line with 5 TW - Centrifuge with TULZ from WMV - ROSS Cooling System - Drum Dryer Find more here - .ucymachines/ Contact us at - sales@ucymachines

A used PICK and FEED system from Hundegger, built in mid-2019, very good maintained condition. Available summer 2026, sale as viewed from the FRG location. The system can be demonstrated by appointment. Sale without dismantling by Hundegger.

Flake Ice Machine Make: Ice Systems Model: F2 AS 2 TON Flake Ice Machine Built 2018 IN cabinet, with stand

We are offering a complete Water-Cooled Induction Leveling System, composed of the following components: 1. Electrical Power Unit - Power Supply: 3 x 400V, 50/60 Hz - Current (In): 50 A - Short-Circuit Current (Icc): 35 kA - Item: 01 - Type: IFC/A-25 (25 kW / 20 kHz) - Year: 2023 2. Inductor Unit - Manufacturer: ATE - Drawing: 239003100_0 - Item: 03 - Year: 2023 - Type: INDUKTOR RECHTS (Right Inductor) 3. Chiller Unit - Manufacturer: M.T.A - Model: TAEevo TECH 051 - Production Year: 2023 - Voltage: 400V / 3Ph / 50 Hz - Power Consumption: 8.8 kW - Current: 10 A - Protection Class: IP54 - Refrigerant: R410A - Charge: 2.088 kg - Global Warming Potential (GWP): 2088 - Cooling Capacity: 32.0 kW (EWT 20°C, LWT 15°C) - Water Flow Rate: 5.5 m³/h - Water Connections: 1 1/4 - Weight: 239 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 1800 mm y-travel: 800 mm z-travel: 1000 mm total power requirement: - kW weight of the machine ca.: 3000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ProJet 3600W Max for sale in good condition. Printing time approx. 10500h, printed build material less than 50KG, printed support material approx. 110KG., Installation: 03/2017, print modes: HD - high definition, Commissioning: 03/2017, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm), resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: 375 x 450 x 790 DPI; 32 μ layers 750 x 750 x 1300 DPI; 20 μ layers 750 x 750 x 1600 DPI; 16 μ layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Printing modes: UHD - Ultra High Definition, Support material support material: VisiJet S400 VisiJet S400, Dimensi ...

For sale is a well-maintained ProJet 2500Plus from 2017. The device is in perfect working order; test printing is possible (for a fee, which will be charged at the time of purchase)., Accessories: EasyClean System from 3D Systems, second build platform, Technology: MultiJetPrinting

On behalf of a customer, we are selling a 3D Systems MultiJetPrinter type ProJet 2500Plus in very good condition. The machine was used as a dealer demo machine., The machine has been equipped with new drive belts and new filters. All materials have been removed according to the manufacturers instructions. The machine is empty. The printing time is approx. 1400 hours, 181,000 layers were printed with approx. 24KG of building material and approx. 33KG of support material., Equipment:, - 3D Sprint Basic Complimentary Software (on-line activation), Installation: 2016, Print modes: HD - High Definition, Net build volume (xyz) net build volume (xyz) hd mode: 294x211x144mm / 11.6x8.3x5.6in, Resolution (xyz) resolution (xyz) hd mode: 800x900x790 DPI; 32μ (0.0012 in) layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on printing parameters, par ...

Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2020 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric ANB42FPJMT (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2t Dimensions: 1.6x0.6x1.8 m. Weight: 281 kg. Working hours: 2330 h. Condition: Good

The Zprinter 850 is the most productive full-color 3D printer with the largest build volume and highest resolution. Print multiple models in a single run or large concept models at any stage of design and development to quickly and cost-effectively perform design iterations, provide your customers with demonstration models, and avoid costly changes in later project phases. Photorealistic Colors The Zprinter 850 full-color 3D printer has five print heads for realistic printing of color models of your design. It enables optimal and consistent color reproduction with gradients using cyan, magenta, yellow, and black binders applied to a white powder. You can place your textures on the model and easily print them on the 3D model. High Throughput, Installation space (x,y,z): 508 x 381 x 229 mm, printing technology: ColorJetPrinting (CJP), Layer thickness: Standard 0.9 - 1.0mm, adjustment possi ...

TANKER TRUCK LOADING SYSTEM, for plastic granules, Maximum speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1,000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper at a rate of 60 m3 per hour, the 300 mm.Ø screw can be lifted and lowered to easily move inside and outside., Maximum discharge heig ...

TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor, Screw length 8.300 mm, The bearings are dust-tight and automatically greased., at the end o ...

ProJet 860Pro ColorJet Printer 3D printer used by 3D Systems for sale., Accessories: Depowdering station, All specifications and operating/installation conditions are in accordance with the manufacturers brochures. Errors and typographical errors excepted., Layer thickness: 0.1mm, Installation space in mm (x/y/z): 508x381x229, number of nozzles: 5x HP11 printheads, building material: VisiJet PXL Core, LBL 3D printing powder, VisiJet Binder, LBL 3D Binder, communication: LAN (Ethernet), Machine dimensions in mm (wxhxd): 1190x1160x1620, Weight in kg: approx. 370KG empty weight, Dimensions machine in mm (wxhxd): 1190x1160x1620

The Projet 660Pro full-color 3D printer from 3D Systems is for sale. The machine is in excellent condition and has been recently serviced according to the manufacturers specifications. Several models are available.

Broschürenfertigung / Booklet Maker Duplo System 5000 Baujahr / Year 2008 - Serial-No. 080100007 Zähler / Counter 7,6 Falzungen-Heftungen Anlage besteht aus / Booklet Maker consist of: Zusammentragmaschine / Air Suction Collator DC-10/60 - 2 x 10 Stations Feeder Format / Size min.120mm x 148mm - max. 350mm x 500mm Grammatur / Paper weight 40-300g/qm Stapelhöhe / Infeed height Station 60mm Geschwindigkeit / Speed max. 5.000 Product/h Broschürenfertigung / Booklet Maker DBM 500 Heften-Falzen / Stitching-Folding Format / Size min. 120x170mm; max. 350x500mm 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Presswerk / Pressing Station DBM 500-P Frontschneider / Trimmer DBM 500T Auslageband / Delivery band DBM -LS Brücke Lifing unit LUL -HM Inklusive Kompressor / Include Compressor Rietschle

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 20.000 lt. vertical mixers which fill each other through the endless screw conveyor. (ask for different capacities), for each mixer :, total height approx 6.950 mm including transmission group, max diam. 2.380 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters (possible gearbox, instead), inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle typ ...

PROGRESS MESH WELDING M-System Evolution Model 2012 M25576 • MMR – Straightening Machine Model 2012 • SWR – 6 Welding Heads Model 2012 Max mesh size: 3.5 m width and 9.0 m length Cross & length wires diameter: 6, 8, 10, 12, 16mm Mesh characteristics: Width: up to 3,500mm, Length: up to 9,000mm Min. Width: 500mm, Min. Length: 1,000mm Max. Bar Length: 9,000mm, Min. Bar Length: 500mm Bar Length Tolerance: +-5mm, Bar Placing Accuracy: +- 10mm Crosswire Diameter: 6, 8, 10, 12 and 16mm Line Wire Diameter: 6, 8, 10, 12 and 16mm Bar on Bar Welding: 12mm on 12mm Placement Angle of Bars: 0° or 90° Minimum Flying End Length: 25mm A Bar must have at least two welding nodes Only one Bar per receiver is permissible Standard centres: Cross Wires: Infinetely variable (minimum 35mm) Line Wires: Multiple of 25mm Minimum Centres: Cross Wires: 25mm Line Wires: 25mm ...

Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbHZ conveyor, sliding belt system, conveyor belt, magnetic belt conveyorType no.: MBF 326P31,75 Containment no.: 44489-10 Year of construction 2017Slide width 300 mmDistance of permanent magnets 250 mmInsertion length approx. 3400 mm (up to assembly box)Insertion length approx. 3900 mm (without assembly box)Insertion height 210 mmSlide-in width housing 370 mm Insertion width Thread mounts for adjustable feet 410 mm Insertion width on the assembly box 470 mm Discharge head - discharge height approx. 1040

EyeSys System 2000 Corneal Analysis System The EyeSys 2000 Corneal Analysis System is designed to provide unmatched performance, accuracy, ease of use, and affordability with these key features: Optimal central and peripheral corneal coverage provides complete information for the entire cornea Automatic calibration and automatic data correction ensure greater accuracy of topographic data. Automatic focusing and simple examination paths improve ease of use, speed up the examination process and virtually eliminate all focus differences between operators. Advanced software applications include primary care, co-management, corneal surgery, and contact lens fitting. The unique and patented three-camera technology provides a side-view image of your patient's cornea and enables the use of true aspherical image processing algorithms. Simultaneous positioning of the patient and opera ...

Meat Grinder S32F Unger system 5 tools Manufacturer: Sind Model: S32F Dimensions: 600x550x1000 mm Electric power: 1.5kW Capacity: 500kg/h

Meat Grinder Unger system 5 tools Manufacturer: Sind Model: S32P Dimensions: 800x600x1000 mm Electric power: 3kW Capacity: 800 - 1,000kg/h

In stock first week of September

Ref. no.: 18565 Manufacturer: DEMAG Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equip ...

ROBOTS FOR HIGH PRESURE DEMOLITION PUMPS IN GREAT CONDITION. ROBOT CONJET 363, 322 , AND JETFRAME SYSTEMS 102

Aircooled chiller SYSTEMAIR SYSCROLL 420 AIR CO E COAT 414.2 KW Cooling capacity: 414.2 kW / 117.78 tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 4 pcs. Bitzer GSD80485VAB4-2 (scroll) Type of refrigerant: R410а Number of fans: 8 pcs. Dimensions: 4.55x2.15x2.5 m. Weight: 2441 kg. Working hours: 5588/5528/7735/2825 h. Condition: Good

Container Size With Actual Configuration: 2 l // Number Of Heads: 5

APV PASTEURIZATION SYSTEM FOR FISH BROTH 1,000 LITRES/HOUR Automatic system designed for the pasteurization of 1,000 litres/hour of strained fish broth for subsequent packaging. Manufacturer: APV Year: 2002 OPERATION DESCRIPTION: - Inlet temperature: 20 °C - Process temperature: 105 °C - Outlet temperature for packaging: 35 °C The whole process consists of different stages that can be programmed using the control panel: 1. Sterilization: carried out by the circulation of hot water at a temperature of 115-120 °C for 30 minutes. 2. Production with water: cooling water flows inside the circuit until the process temperature that will be applied to the product is reached. 3. Production: the unprocessed product is fed into the regulation tank and then the production phase takes place in the circuit. 4. Cleaning-in-place: the installation is cleaned in place by ...

Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 T ...

General SKU269W395 LocationBarneveld CEcheck MakeSatorius Stedim Systems Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity500 l Sizes800 x1200 x 1200 mm Flat topcheck With covercheck MaterialStainless steel 1.4307 (304L) With jacketcheck General TypeFXC106609 Year of construction2021 Mounted on framecheck Mounted on wheelscheck Floorspace0,8 x 1,2 m Total height1,2 m Weight200 kg Extra SpecificationsNew, unused item.The item is delivered in its original packaging (kit).Paints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicSartorius Stedim SystemsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIn ...

General SKU394U1110 MakeLauda TypeTR400 HK/K-EX Mach.No.HKS13075 Year of construction2013 Pressure Working pressure10 Bar Main Features Heating (medium)Oil Capacity12.46 KW Temp.130 °C Specified Features - Temperature control unit Heating medium:Therminol D12 Electric capacity12,46 kW, 400 volt (Ex) Temperature-35ºC/+130ºC With pump2x Capacity18m²/h Motor5,5kW, 400/690Volt, 2925rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld With switchcheck Floorspace1,75x1,0 m Total height2,45 m Weight1800 kg CEcheck ATEX designedcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & meta ...

General SKU294W550 MakeAmersham Biosciences Mach.No.1564 Year of construction2003 Pressure Working pressure5 Bar Main Features MaterialStainless steel Volume120 Ltr. Motor1.5 KW Specified Features - Dosing pump Pumpcheck Number of pumps:2 Capacity120 l/h With motor0.75 kW (2x) With frequency invertercheck Dosing pumps MaterialStainless steel 1.4435 (316L) General LocationBarneveld Mounted on wheelscheck With switchgearcheck Floorspace1,10 x 2,30 m Total height2,10 m Weight300 kg CEcheck Extra Specifications- This dosing pump was part of HPLC column, SKU 294W554 and 294W555&:nbsp:Oils & fatOintmentsBiotechnologyAgrochemicalsDosing pumpsFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsFood additivesBeveragesDyes & pigmentsAPIAmersham Pharmacia BiotechIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Bio ...

General SKU394U1121 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Heating medium:Therminol D12 Electric capacity12.9 kW, 400 volt (ex) Temperature-40°C/+200°C With pump(2x) Motor5,5 kW, 400/690 volt, 2800 (ex) MaterialStainless steel 1.4571 (316Ti) General TypeTR400 HK/HK-EX Mach.No.HKS08025 Year of construction2008 Floorspace1,75x1,0 m Total height2,50 m Weight1800 kg ATEX designedcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additive ...

General SKU360U942 MakeGPI LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1960 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Capacity1960 Ltr. (max. 2000 Ltr.) Vessel sizesdia. 1450x1700 mm Dished topcheck Dished bottomcheck Manholecheck Top connectionsDN65, 1 ½ in, 2 in, 2 ½ in, 3 in Outlet2 ½ in Max. temperature125 °C MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) General No.290259-10 / 380T003 Year of construction2010 Mounted on legs4 With switchgear(as is) Floorspace1,5x1,5 m Total height2,2 m Weight800 kg Extra Specificationswith UV disinfection system: WEDECO ME150-PHPressure vesselsGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmac ...

General SKU394U1122 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Heating medium:Therminol D12 Electric capacity12.9 kW, 400 volt (ex) Temperature-40°C/+200°C With pump(2x) Capacity18m²/h Motor5,5kW, 400/690 Volt, 2880 rpm (ex) (2x) MaterialStainless steel 1.4571 (316Ti) General TypeTR400 HK/HK-EX Mach.No.HKS08027 Year of construction2008 Floorspace1,75x1,0 m Total height2,50 m Weight1800 kg ATEX designedcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-w ...

General SKU259T443 LocationBarneveld CEcheck MakeLock inspection system LTD TypeMetalchek 30+ Main Features MaterialStainless steel Specified Features - Metal detector Metal detectorcheck Tunnel sizes95x38x225 mm Product space95x38 mm With motorcheck With hoppercheck Inlet95x38 mm Outlet95x38 mm MaterialStainless steel 1.4404 (316L) General No.7001 Year of construction2001 Mounted on framecheck Mounted on wheelscheck Floorspace0,8x0,9 m Total height1,3 m Weight235 kg Extra SpecificationsPharma Technology, tablet deduster, type combi 1200 li,inlet height 730-830 mm,outlet height 1490-1590 mm,Outlet chute diameter 60 mmTablet size diameter 4-25 mmcapacity: 150 000-2 000 000 tabs/hMirror finishOils & fatPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchBiotechnologySpicesFeed additivesMetal detectorsOther pharmaceuticsCosmeticsFood additivesSugarDair ...

General SKU394U1120 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Heating medium:Therminol D12 Electric capacity12.9 kW, 400 volt Temperature-40°C/+200°C With pump2x Capacity18m²/h Motor5,5kW, 400/690Volt, (EX) MaterialStainless steel 1.4571 (316Ti) General TypeTR 400 HK/HK-EX Mach.No.HKS08026 Year of construction2008 Floorspace1,75x1,0 m Total height2,50 m Weight1800 kg ATEX designedcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & ole ...

General SKU329T1340 MakeDec TypeDrum sealing cover No.DSC-130 Year of construction2016 Mounted in framecheck Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialGlass, Stainless steel 1.4435 (316L) General LocationBarneveld Floorspace0,79x1,32 m Total height2,9 m Weight400 kg CEcheck ATEX designedcheck Extra SpecificationsWith powderbox, Dia:500x200mmlifting column stroke 320mmbalancer cap. 7,5-11,5 kgsuction lance DN40 triclamp x approx 1500mmcip connection Stäubli R 1/4”hub 2000mm,Magnehelic boxBizerba weighing scale, type ST-D-Z2, (Ex)Dec powder transfer system, type PTS 80-Ncap. 500l/htemp range max 100°Cpressure -50/+50PED class Gas 2/ Art. 3.3, consumption 5 Nm3/h (stickstoff) at 3 bar, product input DN 32 Triclamp, product output DN80 PN10, pneumatic control, dim. 600x380x210 mm, roll conveyor, dim. 800 mm, roll ...

General SKU394U1112 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Heating medium:Therminol D12 Electric capacity12,9 kW, 400 volt (Ex) Temperature-40°C/+200°C With pump(2x) Capacity18m²/h Motor5,5kW, 400/690 Volt, 2880rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) General TypeTR400 HK/KT-EX Mach.No.HSK08023 Year of construction2008 With switchcheck Floorspace1,75x1,0 m Total height2,50 m Weight1800 kg ATEX designedcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCos ...

General SKU269W394 MakeSatorius Stedim Systems TypeFXC106609 Year of construction2021 Mounted on framecheck Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity500 l Sizes800 x1200 x 1200 mm Flat topcheck With covercheck MaterialStainless steel 1.4307 (304L) With jacketcheck General LocationBarneveld Mounted on wheelscheck Floorspace0,8 x 1,2 m Total height1,2 m Weight200 kg CEcheck Extra SpecificationsNew, unused item.The item is delivered in its original packaging (kit).Paints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicSartorius Stedim SystemsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIn ...

General SKU394U1115 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Heating medium:Therminol D12 Electric capacity12.9 kW, 400 volt (ex) Temperature-40°C/+200°C With pump(2x) Capacity18m²/h Motor5,5kW, 400/690 Volt, 2880 rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) General TypeTR400 HK/KT-EX Mach.No.HKS08021 Year of construction2008 Floorspace1,75x1,0 m Total height2,50 m Weight1800 kg ATEX designedcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additives ...

General SKU269W393 LocationBarneveld CEcheck MakeSatorius Stedim Systems Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity500 l Sizes800 x1200 x 1200 mm Flat topcheck With covercheck MaterialStainless steel 1.4307 (304L) With jacketcheck General TypeFXC106609 Year of construction2021 Mounted on framecheck Mounted on wheelscheck Floorspace0,8 x 1,2 m Total height1,2 m Weight200 kg Extra SpecificationsNew, unused item.The item is delivered in its original packaging (kit).Paints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicSartorius Stedim SystemsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIn ...

General SKU394U1133 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Thermal oil heaterTherminol D12 Heating medium:Oil Heating capacity-40°C/+200°C Electric capacity12,9 kW, 400 volt (ex) With pump(2x) Motor5,5 kW, 400 volt, 2880 (EX) MaterialStainless steel 1.4571 (316Ti) General TypeTR400 HKT/KT-EX Mach.No.HKS08031 Year of construction2008 Floorspace1,75x1,0 m Total height2,45 m Weight1800 kg ATEX designedcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-w ...

General SKU269W392 LocationBarneveld CEcheck MakeSatorius Stedim Systems Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity500 l Sizes800 x1200 x 1200 mm Flat topcheck With covercheck MaterialStainless steel 1.4307 (304L) With jacketcheck General TypeFXC106609 Year of construction2021 Mounted on framecheck Mounted on wheelscheck Floorspace0,8 x 1,2 m Total height1,2 m Weight200 kg Extra SpecificationsNew, unused item.The item is delivered in its original packaging (kit).Paints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicSartorius Stedim SystemsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIn ...

General SKU349U1124 MakeLauda TypeTR 400 HK-Ex Mach.No.HKS0836 Year of construction2008 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Thermal oil heaterTherminol D12 Water heaterwater/glycol Heating medium:oil/water/glycol Electric capacity12,9kW, 400Volt (EX) Temperature-40°C/+200°C With pump(2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) General Mounted on framecheck LocationBarneveld Floorspace2.20x1,0 m Total height2,30 m Weight1600 kg CEcheck ATEX designedcheck Extra SpecificationsThis Lauda is equipped with a heat exchanger.Brand: MerckBuilt by: Herbst Maschinenfabrik GmbHFactory number: 08-12583-26/2Material: 1.4571, Stainless Steel 316TIJacket data, pressure: -1/+16bar, test pressure: 25.2bar, te ...

General SKU269W391 LocationBarneveld CEcheck MakeSatorius Stedim Systems Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity500 l Sizes800 x1200 x 1200 mm Flat topcheck With covercheck MaterialStainless steel 1.4307 (304L) With jacketcheck General TypeFXC106609 Year of construction2021 Mounted on framecheck Mounted on wheelscheck Floorspace0,8 x 1,2 m Total height1,2 m Weight200 kg Extra SpecificationsNew, unused item.The item is delivered in its original packaging (kit).Paints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicSartorius Stedim SystemsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIn ...

General SKU204W038 LocationBarneveld CEcheck MakeSIHI Pressure Working pressure0.01 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume70000 Ltr. Motor6 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:1 Capacity70 m³/h With motor6 kW, 400 volt, (Ex) InletDN50 OutletDN50 MaterialMild steel General TypeDRYA 160010 GT Mach.No.050 1E S PW Year of construction2005 Mounted on framecheck With switchgear(as is) Floorspace1,40x0,80 m Total height1,75 m Weight750 kg ATEX designedcheck Extra Specificationsthis machine will be sold as as is”With Vahterus heatexchanger, volume 1,8 l., pressure -1/12 bar, test pressure 18,8 bar, allowable temperature 0°C/200°C, jacket, volume 3 l., pressure-1/12 bar, test pressure 18,8 bar, allowable temperature 0°C/200°C,ATB centrifugal pump, (Ex), cool liquid tank, flow valves,&:nbsp:Oils & fatCon ...

General SKU250W324 LocationBarneveld CEcheck MakeSatorius Stedim Systems Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity500 Ltr. Sizes800 x1200 x 1200 mm Flat topcheck With covercheck MaterialStainless steel 1.4307 (304L) With jacketcheck General TypeFXC106609 Year of construction2021 Mounted on framecheck Mounted on wheelscheck Floorspace0,8 x 1,2 m Total height1,2 m Weight200 kg Extra Specifications- New, unused itemPaints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicSartorius Stedim SystemsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > OintmentsIndustries >  ...

General SKU235W256 MakeLeffek LocationBarneveld CEcheck TypeWWCU-PHE 40-76/750 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel General No.497-07 Year of construction2008 Floor space2,1 x 2,5 m Total height2,2 m Weight2720 kg Extra SpecificationsWater-Water Cooling Unit (WWCU) with&:nbsp:&:nbsp:- deionised water circuit (including two deionisation pressure filters, 2 x 18 l/h)&:nbsp:&:nbsp:- heat exchanger&:nbsp:&:nbsp:- industrial water circuit&:nbsp:&:nbsp:- pumps&:nbsp:&:nbsp:- control cabinet and full documentationOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste ...

General SKU238W1595 MakeLock House TypeIMA Lock met 30+ WIP LocationBarneveld CEcheck Main Features MaterialStainless steel Dia/Width950 mm Specified Features - Metal detector Metal detectorcheck Tunnel sizes95 x 35 mm MaterialStainless steel 1.4305 (303) With jacketcheck General No.038615/1 Year of construction2009 Mounted on framecheck Floorspace0,55x0,56 m Total height1,35 m Weight200 kg Extra Specificationspower:&:nbsp:100-240 volt, 3AOils & fatPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchBiotechnologySpicesFeed additivesMetal detectorsOther pharmaceuticsCosmeticsFood additivesSugarDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesBiopharmaceuticalAPILock Inspection SystemsIndustries > Food & Feed > Oils & fatIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical >  ...

General SKU394U1130 LocationBarneveld CEcheck MakeLauda Pressure Working pressure3 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Thermal oil heater(Therminol D12) Heating medium:Oil Electric capacity12.9 kW, 400 volt (Ex) Temperature-40°C/+200°C With pump(2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) General TypeTR 400 HK/HK-EX Mach.No.HKS08025 Year of construction2008 Floorspace1,75x1,00 m Total height2,50 m Weight1800 kg ATEX designedcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE ...