system used for sale

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

voltage: 20-250 VAC V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oil spill response systems from Expandi Systems (a Swedish-Spanish manufacturer known for inventing the world's first self-inflating booms) are actively used in Europe to protect coastlines and eliminate accidents at sea. There are 4 bons.

Oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 1615 2653 -Pressure: max. 11 bar -Dimensions: 315/200/H500 mm -Weight: 22.2 kg

Complete Euro-Diesel S.A. industrial control rack with original electronic control and interface cards. Included in this complete rack: 1× REDBUS EUR-0801 Rev.B rack/backplane 4× Card DIO Ver. 3.04 1× CAN R1 communication card 2× CARTE PSU Ver. 2.3 power supply cards 1× Original metal Euro-Diesel rack Manufacturer: Euro-Diesel S.A. Condition: Used Quantity available: 1 complete rack Location: Delft, Netherlands Removed from an industrial installation. The components have not been individually tested after removal. The rack is sold only as a complete unit. Individual cards are not sold separately. Please see the photographs for the exact configuration, connectors, serial numbers and condition.

Complete Euro-Diesel S.A. industrial control rack with multiple original control, communication, power supply and interface cards. Included in this complete rack: 1× MBCPU R2 rack/backplane 4× ACIN V2.7 cards 2× CARTE PSU Ver. 2.3 power supply cards 1× MONA R1 with Analog Devices AD202JN isolation amplifier 1× INTM Card V3.4 1× CAN R1 communication card 1× RS485 R1 communication card 1× Card DIO Ver. 3.04 1× Original metal Euro-Diesel rack Manufacturer: Euro-Diesel S.A. Condition: Used Quantity available: 1 complete rack Location: Delft, Netherlands Removed from an industrial installation. The components have not been individually tested after removal. The rack is sold only as a complete unit. Individual cards are not sold separately. Please see the photographs for the exact configuration, connectors, serial numbers and condition.

BUDERUS CNC 235 – CNC Grinding and Machining Center Machining / Spindle 2 machining areas / channels Max. machining length: 150 mm Max. swing diameter: Ø 310 mm Workpiece spindle speed: 0–3,000 rpm Spindle bore: Ø 45 mm Workpiece spindle positioning via C-axis Table speed X/Z: 0–30 m/min Motor Spindle WMZ / DVS Type: GS 205-045/17 Year of manufacture: 2014 Automation Automatic workpiece feed / conveyor system Coolant / Filtration System LIQUI-Filter GmbH System: UR1060 / MW260 / Gamma 13 Tank capacity: 2,400 l Year of manufacture: 2015 Cooling System HYFRA gamma 13-F-S Cooling capacity: 13 kW at 32 °C Year of manufacture: 2015 Measuring Technology JENOPTIK post-process measuring technology Year of manufacture: 2018 Supply Data 3 × 400 V / 50 Hz Installed power: approx. 45 kW Compressed air requirement: 15 Nm³/h at 5 bar

Ulma VTC 840 Technical Specifications Model: VTC 840 Condition: Exhibition machine (fully functional) Year of Make: 2025 Capacity: Up to 90 packs/minute (depending on film and product characteristics). Packaging Type: Flowpack Features ✅ Wash Down IP 66 version in hygiene design ✅ Machine suitable for mono PE film ✅ Motorized film roll holder (max. film width 830mm) ✅ Headspace Vacuum Version (Tigth Bag) ✅ Format tube for bag width 240 & 310mm ✅ Photocell for printed film ❌ Label dispenser ❌ Printers ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 830mm) ✅ Cross sealing beam with Easy Teflon Change ✅ Ejector sponge for controlling package volume ✅ Synchronization signals for pre- and trailing devices ✅ Discharge belt Documentation & Operation Language (documentation & ...

Manufacturer: Precision X-Ray Model: X-Rad 160 XL Year of Manufacture: 2024 Run time: Approximately 80 hours, based on unit logs Machine type: X-ray irradiation system Input voltage: 1PH 230VAC, 50/60Hz FLA (Full Load Amps): 40 Amp Application: Used to irradiate semiconductor ICs for robustness testing to X-ray exposure Usage history: The project this unit was purchased for has concluded. It was found the exposure type could not be well quantified for future qualification needs, so the unit has not been used much recently. Condition: Fully functional, but displays error messages that do not clear during warm-up or irradiation. When this occurs the unit must be restarted, and it may take several attempts to complete warm-up and function. Cooling: The tube cooler is wall-mounted to save space, but can also be set on the floor.Hoses allow the unit to be positioned at least 10 feet  ...

1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capac ...

Hand-held air extraction system for Hermle Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

A labeling system with two rotary tables and a scissor roller conveyor is offered. 1) Fully automatic Küppersbusch wrap-around pressure-sensitive labeling machine, type: ETT 5000-V, version for cylindrical containers with 3-roller system for front and back labeling, rated output: approx. 1200containers/h, bottle travel direction: right/left, bottle diameter range: 40mm-80mm, conveyor length: approx. 2500mm, conveyor width: approx. 82mm, conveyor height: 800mm +/-100mm, Küppersbusch ETT 4301/200 label dispenser, backing paper width: 30mm-200mm, label roll core: 76mm, max. label roll outside diameter: 280mm. 2) Küppersbusch infeed rotary table: diameter: 1000mm, version with V2A stainless-steel tubular frame and plastic plate. 3) Küppersbusch accumulation rotary table, diameter: 1000mm, version with V2A stainless-steel tubular frame and wear-resistant, noise-damping plastic plate. In a ...

Wall-mounted refrigerator from the brand RITTAL model BLUE e+ SK3189940 No documentation In your state

The lifting tilting device includes the substructure of the traversing trolley, the control cabinet, the vibrator and the lifting tilting device. The centrifuge is not included. Performance specifications including the centrifuge: Electricity 59 A, power 28 kW, 50 Hz.

Bystronic Byspeed 3015 Bylaser 5200 ARC Control: ByVision Suction Donaldson Car Charge-Discharge System Auction-ID: A7-32339-2

For sale is a professional process water evaporation plant from KMU Umweltschutz GmbH for the efficient treatment of industrial wastewater and reduction of disposal costs. Technical data: Type: PROWADEST 300 Year of Make: 1997 Distillation capacity: 300 liters/hour Connected load: 30 kW (230/400V 50Hz) Equipment: Integrated control cabinet with control unit and frequency converter. Condition: Used, good optical condition according to its age, unchecked.

Max. throughput: 156 cartons or 15 pallets/h, max. pallet height including load carrier: 1989mm, max. pallet weight including load carrier: 800kg, equipment: KOCH gantry/axis system with automatic carton and pallet handling, automatic empty-pallet and interlayer handling, product infeed with barcode recognition, extensive product and pallet conveyor technology, automatic pallet wrapping using a Lachenmeier wrapper, automatic pallet labeling by Bluhm Systeme, automatic pallet weighing by Bizerba, several stationary and mobile operator panels, central KOCH system control with remote-maintenance capability, extensive safety and protective equipment, including documentation. The system was only lightly used and has very low operating hours.

BioMérieux Mini Vidas Immunoassay System Model: 440416 Dimensions (W x D x H): 550 x 450 x 575 mm Weight: 40 kg

Complete Knapp Fastline System RA2519 ________________________________________ Premium Conveyor Technology Available Immediately A high-quality, modular conveyor system from the Austrian intralogistics specialist KNAPP AG is for sale. The system was manufactured in 2015 as part of an automated material flow system but was never put into operation. It remains disassembled and in storage today. With a conveyor length of approximately 300 meters, numerous buffering sections, RollerDrive curves, and comprehensive original documentation, this system offers a cost-effective alternative to a new, expensive purchase. ________________________________________ The system at a glance Feature Description Manufacturer KNAPP AG System Fastline Year built 2015 Conveyor Length approx. 300 m Roller Width 450 mm Accumulation space 720 mm Conveyor speed 0 ...

A complete mailing system with a second Neopost inserting station is offered. Max. inserting speed: 4300mail pieces/h, fold types: single fold/letter fold/zigzag fold/double parallel fold, max. folding capacity: 8sheets at 80g/m², max. thickness of a single document: 3.5mm, max. thickness of a fully compressed set: 5mm, max. feed units: 4, envelope hoppers: 2, document capacity per feed tray: max. 500sheets at 80g/m², max. envelope capacity: 800envelopes C5/6, document width: 130mm-230mm, document height: 90mm-340mm, paper weight: 45g/m²-170g/m², envelope width: 140mm-255mm, envelope length: 90mm-345mm, max. job memory: 9, dimensions X/Y: approx. 5031mm/720mm, weight: approx. 214kg. Documentation available. An on-site inspection is possible.

Manufacturer: SAKI Model: 3Di-LS2 18um Type of Machine: 3D AOI System Year of Manufacture : 2023 Configuration: High-speed single-lane system, without side cameras Technology: Highly accurate and repeatable 3D measurement technology with digital 4-way stripe projection and telecentric camera technology Process Linking: Process linking with SAKI SPI systems Technical Specifications: - Resolution 18um in X/Y direction, 1um in Z direction - Printed circuit board format 50x60mm to 500x510mm - PCB thickness 0.6 to 5.2mm - PCB clearance top/bottom 40/60mm - PCB deflection +/- 2mm - Image acquisition time: 5700 mm2/s - 4-way projection with multidirectional ring light - Conveyor belt height: 880 - 965 mm - Dimensions 1040x1440x1500mm (WxHxD) - Weight: approx. 900 kg - Power supply ~200-240V +/-10%, 50/60Hz - Compressed air 0.5MPa, 5l/min (ANR) - Automatic transport width adjustment - Op ...

Two identical QAVERtec testing and measuring machines for quality control of freshly produced concrete products are offered. Facing/core porosity measuring range: 0%-100%, porosity resolution: 1%, height measuring range: 35mm-130mm, height measurement resolution: 0.1mm, weighing range: 0kg-25kg, scale resolution: 0.01kg, density determination: calculation of bulk density, max. vacuum: 900mbar, tolerance: +/-2%, working radius: 5m, PC unit: CX5130-0175, operating system: Windows 10, display: 19 inches. Machine dimensions X/Y/Z: 1550mm/1150mm/530mm, weight: 120kg. Documentation available. Inspection by arrangement is possible.

Used bread roll line KÖNIG, type: Classic Rex T6 / 5S with ECO Twin 800 -In bakery condition- For sliced rolls, emperor rolls and double rolls - Head machine Classic Rex T6 / 5S - 6 or 5 rows can be used - Pre-proofer Eco Twin 800 - With SIEMENS SIMATIC control system - Integrated long scooter - in bakery condition, immediately ready for use Viewing and test run are possible by arrangement. Further information on request. Subject to prior sale.

Key data: 700 mm, 400 mm, 500 mm

Photon Energy Workstation XXL II CEPHEUS Mark12 – USP/picosecond laser system For sale is a well-maintained Photon Energy Workstation XXL II with CEPHEUS 1012 marker from ongoing operation. The system is particularly suitable for operators of existing Photon Energy / Hitachi systems, medical technology companies, laser marking service providers or companies with a need for UDI-compliant, permanent marking. Key data: Year of manufacture: February 2023 Runtime: approx. 4600 hours Laser: Nd-Vanadate, 1064 nm Laser power: over 12 W at 500 kHz Pulse duration: less than 15 hp Repetition rate: 20 to 500 kHz Cabin dimensions: approx. 1.46 m x 2.45 m x 2.38 m Weight: approx. 3.5 t Scan field: 160 mm x 160 mm Telecentric lens: F 163 mm, scan field 90 mm x 90 mm ZD30 axis of rotation available PHOTONmark, PUC / UDI Control, CamVisionPro and handheld scanner available Last ...

incl. MultiCassette-Loader, max. plate format approx. 930 x 1140 mm, very well maintained, fully functional, Price from location on request

Manufacturer: General Inspection (Gi) Model / Machine Type: GI-HALO Date of Manufacture: 10/2018 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Clean air extraction system Holzkraft Type: RLA 125 Year of Make: 2001 CE Nominal volume flow 1095 m³/h Min. volume flow 884 m³/h Intake manifold diameter 125 mm Motor power 1.5 kW Voltage 400 V /3 Ph /50 Hz Rated speed 2800 rpm Rated current 3.5 A Protection class IP 54 Air filter version Filter cassette 1 x Item no. 0541213 Filter cleaning manually Chip collection volume 165 ltr. Suitable for vacuuming and separating dry wood and wood. Plastic chips BG-tested Dimensions L 1100 mm x W 830 mm x H 1600 mm Weight approx. 205 kg

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 300,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 400,-

Encoders, 2 pcs. Heidenhain, ROD 426.000B-1500 Id.Nr. 2295 434 KL, Ser.Nr. 7412 736V02, φ 56mm 2 pcs. TR Electronic GmbH, D-78647 Trossingen Type: CE100M, Art. No. 101-00024, SN 0125 Voltage : 11-27VDC, steps/revolution: 4000/4096, φ approx. 105mm, unused -new

Vacuum homogenizing system Make Haagen & Rinau Type Unimix RU IV 200 Net capacity 200lt Stirrer with scraper 1500/300 rpm 3.7/4.4 KW Homogenizer 1500/300 rpm 2.0/2.4 KW Heating by steam double jacket, max 6bar

Main tent approx. 2,145 m². Modular aluminium system, longitudinal grid approx. 5.00 m. In addition, according to the test book, free-standing porch/canopy construction with open gable, 10 m or 15 m deep; their additional area is deliberately not included in the reference area. Own test book; approval extended until 2028 according to the current state of documents.

Main tent approx. 1,815 m². Separately usable LOSBERGER system with modular aluminium system and approx. 5.00 m longitudinal grid. Also with 10 m or 15 m deep porch/canopy construction with open gable according to documents; additional area not included in the reference area. Own test book; approval extended until 2028 according to the current state of documents.

AI VC MECHANICAL STRIPPING SYSTEM DIMENSION: 48 X 45 X88 MANUFACTURER: AIMS MOTION TECHNOLOGY FOR MORE INQUIRY KINDLY REACH OUT TO: HAKKIM (F25): +60 12-343 6052 FATIMAH ASMAD: +60 13-628 7197 IZLIN ISMAEL (F22/25): 018 258 2737

AI VC MECHANICAL STRIPPING SYSTEM DIMENSION: 48 X 45 X88 MANUFACTURER: AIMS MOTION TECHNOLOGY FOR MORE INQUIRY KINDLY REACH OUT TO: MUSTAQEEM (F22): +60 19 506 7040 FATIMAH ASMAD: +60 13-628 7197 IZLIN ISMAEL (F22/25): 018 258 2737

We sell a winding and pulling machine for electric motors. The system has three winding stations, a pulling station and an intermediate molding machine. Since an electronic card is defective, the machine is only partially functional at the moment. The facility is in good condition.

DAXNER Pneumatic conveying system for coffee / bulk materials – complete – year of construction 2012 For sale is a high-quality and fully equipped pneumatic conveying system from the manufacturer DAXNER, specially designed for the gentle conveying of coffee and similar bulk materials. Technical data: Manufacturer: DAXNER (Austria) Year of construction: 2012 Flow rate: approx. 900 kg/h Conveying type: pneumatic (side channel blower) Product: coffee / light bulk materials Operation: continuous Scope of delivery: Side channel blower Receiver container / separator Valves and control system Complete, functional system Special features: Very gentle conveying (ideal for sensitive products such as coffee) Low-dust / closed conveying Robust industrial design Immediately ready for use Condition: Used, Viewing possible by arrangement. Further information and pictures are  ...

Complete heavy-duty roller conveyor system from previous door production for self-dismantling or with separate dismantling by agreement, Approx. 75 linear metres Heavy-duty roller conveyor elements without drive, Roll lengths 500mm, roll diameter 100mm Stands, can be dismantled into individual sub-segments, of which 6 elements L5800 W600 H320mm standing up to H459mm with end-stop rocker, 2 elements L3000 W600 H320mm standing up on H450mm with end-stop rocker, 7 Elements L3800 W600 H320mm with End Stop Rocker 1 element L3050 W1150 H450mm 2 cross carriages L2800 B800 H450mm with rope stop 1 cross carriage L2400 B1150 H450mm with one-sided stop 1 cross carriage L2100 B1200 H450mm with single-sided stop 1 movable roller conveyor element L3800 W800 H 400mm with rope stop & stanchion pockets Complete acceptance

Offer 26289 Technical data approx. : - CNC flame cutting machine with 2 burners as shown - 2 burner heights + tilt adjustable - Track gauge approx. 4.2 m - Track length approx. 7.5 m - Track height approx. 0.5 m - Space requirement approx. L 8 x W 7.5 x H 2.3 m - Weight approx. 3 T - Without support table

Heidelberg Suprasetter A75 ATL Gen III 4 up Age: 2010 Productivity: 17/22 plates per hour Max. format: 676 x 760 mm Min. format: 240 x 240 mm Total Exposure: 171.873 pieces Total punches: 171.718 pieces 64 Diodes Resolution: 2540 dpi For Thermal Plates Meta Dimension 2017 Autoloader Punching Device Stacker Advand PST 26 With Dongle

- Baking Plate Amount: 60 Baking Plates - Baking Plate Size: 220 x 220 mm - Capacity: max. 3.000 pieces / Hour - Cone Size: max. 190 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Packing Conveyor Available.

Holtrop Jansma MSO 300 Manufacturer: Holtrop Jansma Type: MSO 300 Year: 2006 M-Nr.: 6056421 Diameter dust extraction pipe: ø300 mm Length: 2.925 mm Width: 1.230 mm Nett working height: 2,840 mm Capacity: 5.860 m3/uur Pressure: 1.965 Pa Power: 5,5 kW, 380V, 9 Amp Filter surface: 41 m2 Filter sleeves: 45 pcs Containers: 3 250 Liters Condition: Good, well functioning

- Baking Plate Amount: 60 Baking Plates - Baking Plate Size: 220 x 220 mm - Capacity: max. 3.000 pieces / Hour - Cone Size: max. 110 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Packing Conveyor

Manufacturer: Holtrop & Jansma Type: SUV 200S M Nr: W0061905S Year: 2023 Type: 200S Length: 2380mm Width: 850mm Height: 2550mm Diameter: 200mm Capacity: 2.700m3uur Pressure: 1.575Pa Power: 2,2 kW Filtering surface: 5 sqm Filtering aid: 2 pleated filters Containers: 2 210 liters Average noise: 79 dB(A)

Holtrop Jansma SUV 200s dust extraction plant Brand: Holtrop Jansma Type: SUV 200S M Nr: W0057430S Year: 2017 Type: 200S Length: 2380mm Width: 850mm Height: 2550mm Diameter: 200mm Capacity: 2.700m3uur Pressure: 1.575Pa Power: 2,2 kW Filtering surface: 5 sqm Filtering aid: 2 pleated filters Containers: 2 210 liters Average noise: 79 dB(A)

A complete Pall cartridge filter unit with cleaning equipment is offered. Filter housing: Pall SFG7194GNW80, filter cartridge positions: 19, max. operating pressure: 10bar, max. operating temperature: 140°C, volume: 153l. 2) CIP tank: approx. 5hl, steam-heated. Including Hilge CIP pump, Pall water filter with 3 filter cartridges, complete piping, Kieselmann butterfly valves, digital Barby+Kühner thermometer, inlet and outlet pressure gauges as well as 10 stainless steel blind plugs for the cartridge mounts. Suitable for depth filter cartridges and membrane filter cartridges. An on-site inspection is possible.

EXTRACTION SYSTEM HUNKELER HKU 2000 (Compact Extraction Unit)

AGICOM Recycling Machine Trade The Easy 180 cable pelletizing system is the ideal entry-level model for professional cable recycling. This one-man machine is thrown in by hand. Pre-shredded cable material or uncut cables are thrown in. The Easy cable pelletizing system is very robust, powerful and delivers the best results from old and residual cables. The machine is characterized by: Compact design Low space requirement Easy to use Low energy consumption Operating instructions in German Spare parts (knives, perforated sieves) available Technical data Feed material: Electrical cable without impurities Throughput capacity: up to 180 kg/h Drive: 8.5 kW Weight: approx. 1200 kg Dimensions: approx. 1700 x 1300 x 2100 mm

Gainsborough GV2K108 VFFS bagger with auger filler Serial: GV101450 2010, Vertical form fill seal bagging machine with top mounted Augapac vectofill S4 auger filler, smart date X40 coder, HMI touch screen controls, up to 70 bags per minute, 250mm jaw width, comes with box of spare jaws, screws, belts, forming shoulders, also comes with Volkmann VS2000 vacuum conveyor which was previously used to vacuum powder into the hopper, with manual, 3Ph

: 800 x 600 mm Motor output: 18,5 kW Diameter of the motor: 252 mm Weight: 1.300 kg : 15 mm number of blades: 14 turning speeds: 90 U/min Number of working hours: ca. 1.244 h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.