system used for sale

Dematic conveyor system Accumulating roller 24000-500-440 RA2346 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 24000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Stowage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.5 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guid ...

Intake pipe: 180 mm Voltage: 230 V, 50 Hz Filter area: 6.0 m² Flow rate: 1000 m³/h Total power requirement: 0.3 kw Machine weight approx.:78 kg Dimensions L-W-H: 400x600x700 mm Electrostatic separator: Filter chamber L: 360 x W: 510 x H: 500mm 3 trays with: - Pre-filter (knitted stainless steel) 500x370x20mm -Ionizer/Collector Cell 500x370x210mm -Post-filter (knitted stainless steel) 500x370x20mm

We are offering a complete HL6 line, consisting of: - UW6 unwinder - HL6 laser with two laser heads - RW6 rewinder - Exhaust filter system HKU Manufacturer: Hunkeler Find more here - / Contact us at -

Machine name: Inversion system for liquid polymers Manufacturer: Reiflock Type: Reifomat 500 Year of Make: 1999 Conveying / Dosing of: Liquid Polymers Capacity: Polymer flow: 0.12 - 2.5 l/min. Water flow: 40 - 160 l/min. Dimensions: L 1000 x W 750 x H 1500 mm Curb weight: Approx. 120 kg 2Ygvwomvc Tech. Documentation: Yes Note: Achievable flocculant concentration: 0.07 – 2.5 % Electrical connection: 380 V / 16 A connected load: approx. 2.2 kW Condition: Used Price: On request

Kitzinger Dishwasher Type Contino 800 Q BS3 REKU Year of Make: 2012 Noise exposure 85 dB (A) Output approx. 800 baskets/planks per hour possible Electr. Connected load: approx. 100 KW Washing temperature approx. 50°C Rinse temperature approx. 80°C Fresh water consumption: approx. 400 l/hour Tank volume approx. 1500 litres (pre-wash and main wash tank) Blow-off from 3 sides with 3 motors Max. throughput dimensions crates: 400mm high x 650mm wide Max. throughput dimensions of sheets/planks (portrait): 440mm high x 60mm wide Dimensions approx. LxWxH: 12,000mm x 2,200mm x 2,700mm Weight: approx. 1,500 kg - immediately available from STOCK

Manufacturer: DIMA Model: HS-100 This device is known for its high precision and versatility, thanks to its robust construction and motor-driven printing head, which moves on linear bearings. All printer settings can be precisely adjusted using an intuitive Windows-based interface, allowing for perfect configuration for every type of printed circuit board. The self-learning feature ensures quick and easy determination of the correct board position, simplifying operations and speeding up the production process Find more here - / Contact us at -

Machine name: Polymer dosing system Manufacturer: Alltech Type: Polymat 1000 V7 KD S Year of Make: 2003 Content: 1000 liters Conveying / Dosing of: Powder-shaped # Chamber: 2 Control: Yes Drive motor: 1: 0.55 kW, 12 0.55 kW Version: Horizontal Dimensions: Length 2000 x Width 900 x Height 1900 mm Curb weight: 1000 kg Tech. Documentation: Yes Accessories: Dry material doser type T09K0007 Condition: Used Price: On request

Refurbished pre-treatment system with a warranty of 12 months. Further technical details on request

Refrigerant compressors system Bitzer Type: 4HE-18Y-40P (x2), 4H-15.2Y (x1) Volume: 73.6 m3/h (x3) Cooling capacity for R404A: 153.2 kW at -5°C/40°C, 126.3 kW at -10°C/40°C, 65.5 kW at -25°C/40°C Dimensions: 2600 x 950 x 1970 mm Items in magazine: 1 Reference number: Z90 Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Refrigerant compressors system Bitzer Type: 6J-22.2Y (x1), 6JE-25Y-40P (x2) Volume: 95.3 m3/h (x3) Cooling capacity for R404A: 191.1 kW at -5°C/40°C, 156.3 kW at -10°C/40°C, 78.4 kW at -25°C/40°C Dimensions: 2700 x 850 x 1950 mm Items in magazine: 1 Reference number: Z89 Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Refrigerant compressors system Bitzer Type: HSK 8551 110-40P (x3) Volume: 315 m3/h (x3) Cooling capacity for R404A: 662 kW at -5°C/40°C, 539 kW at -10°C/40°C Dimensions: 3900 x 1700 x 2350 mm Items in magazine: 1 Reference number: Z94 Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Refrigerant compressors system Bitzer Type: HSK 6461-60-40P (x3) Volume: 165 m3/h (x3) Cooling capacity for R404A: 426 kW at 0°C/40°C, 351 kW at -5°C/40°C, 287 kW at -10°C/40°C, 185 kW at -20°C/40°C Dimensions: 3550 x 1050 x 1880 mm Refrigerant tank in set Items in magazine: 2 Reference number: Z77 Condition: Used in good condition Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Refrigerant compressors system Bitzer Type: 4VCS-6.2Y-40P (x2) Volume: 34.7 m3/h (x2) Cooling capacity for R404A: 44.4 kW at -5°C/40°C, 36.5 kW at -10°C/40°C, 18.5 kW at -25°C/40°C Dimensions: 2050 x 750 x 850 mm Items in magazine: 1 Reference number: Z99 Condition: Used in good condition Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Dematic conveyor system Accumulating roller3000-600-540 RA2361/61.1 Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 3000 mm Condition: good (used) Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Accumulation slot size: 625 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 62,5 mm Wheel diameter: 50 mm Partly rubberized for more grip when braking Drive module RA2361: Drive types: SEW geared motor Conveying speed: approx. 0.5 m/s Electrical data: 380-400V kW depending on total length The extension module always requires a drive module! Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides element length can be shortened up to 3m Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good ( ...

(printing, laminating, punching) Equipment / Additional information: Car inspection stickers were last produced

Burn-Drilling Rig Panel Processing Center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC Control Power source Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Auto. Revolver Tool holder: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring scribing marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x400 mm with restriction ) Minimum dimensions of finished parts: 80 x 80 mm Sheet weight max.: 2,600 kg and 650 kg/m Feed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-position cross conveyor Number of cars: 2 pliers NC feed carriage, placed on the side 4 collets (2+2) 3 Short Stroke Cross Conveyors Working height: 1,000 mm Removal page: Discharge roller conveyor with lowerable unloading table with chute in Material c ...

Used biscuit line for round, square and hot dog buns BERTUETTI, type: 200 Universal - for round, square and long-rolled rolls, such as HotDogs - 4 rows - 1, 2 or 4 rows can be used - with settling on sheet metal - Dough intake - Sowing - Good condition, ready for immediate use Visits and test runs are possible by arrangement.

Knapp roller conveyor accumulating sorter sorting system Fastlane 11200-375-290 RA1954 Brand: Knapp Running direction: both directions Belt spacing: 290 mm Nominal/outer width (NB): 375 mm Length: 11200 mm Frame height: 105 mm /190 mm with sorter Belt width: 35 mm Number of outfeeders: 6 pcs. Number of pneumatic accumulation places: 6 pcs. Belt conveying speed: 36 m/min Accumulation and sorting length: 600 mm. Theoretical sorting speed: 2.0 Sec/sorting, 1800 sortings per hour Electrical data: SEW geared motor 0.37 kW, 380V Scope of delivery: without supports, without side guides, with drive station, with light barriers and accumulation mechanism Optionally available: Supports Side guide on one and both sides Change of total length/position Faster motor for higher throughput rates (theoretically 3200 sorts per hour) Programming for sorting process Price: plus VAT ex central warehouse Dr. ...

Dematic conveyor system Roller conveyors 20370-600-540 RA2369 Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: 1987 Condition: good (used) Conveyor length (NL):20370 mm, 7 elements between 2620 and 3000 mm, Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Roller width (RB): 540 mm Frame height: 140 mm Overall height including motor: 240 Roller pitch: 62.5 Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.7m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Electric data: 380-415 condition: gut Conveying length in mm: 20370 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5 Driven:  ...

SPECIFICATIONS: Machining length: max. 3000 mm - min. 250 mm Processing thickness: min. 30 - max. 155 mm Processing width: max. 200 mm Tenon cutting area 01 Tenon cutting unit - max. Ø 400 mm - 3 kW 01 Spigot cutter - length 600 mm - 7.5 kW - shank Ø 50 mm - 3100 rpm 01 Electronic guidance Roll forming area: I Roll forming unit - length 600 - 7.5 kW - shank Ø 50 mm - 6000 rpm II Roll forming unit - length 600 mm - 7.5 kW - shank Ø 50 mm - 6000 rpm 01 Glazing bead unit - Ø 200 mm - 2.2 kW 01 Rubber roller drive unit

Kaiserstüpfler table machine WP Comet Stüpfler 2-row for manual assignment Weight range 40 to 75 grams/piece depending on TA Manual operation Extendable discharge belt DGUV V3 tested Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 550 x 420 x 1230 mm, WxDxH Used machine cleaned and checked 3 months warranty + spare parts service Option: Driving table Maintenance contract Service Package E-Box Instruction & Commissioning We have many top bread roll machines in stock for you!

Bread roll machine Machine mobile Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1400 x 650 x 1650 mm, WxDxH Machine Option: Maintenance contract Service Package Come to our large bakery equipment park!

Dematic conveyor system Roller conveyors 19500-600-540 RA2370 Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: 1987 Condition: good (used) Conveyor length (NL): 19500mm, 7 elements between 2620 and 3000 mm, Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Roller width (RB): 540 mm Frame height: 140 mm Overall height including motor: 240 Roller pitch: 62.5 Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.7m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Electric data: 380-415 condition: gut Conveying length in mm: 19500 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5 Driven:  ...

stations: 16 max. speed sets: 3500 /h max. paper size: 32 x 47 cm stiching folding unit: SPF-10 Trimmer: FC 20 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: SOLO Model: Profitherm 300 Year of Manufacture: 2019 Type of Machine: Condition: Used Specification: 5 main stations: Furnace; salt bath; wash machine; salt recuperator; manipulator Water supply 900 l/h; 15 Celsius-25 Celsius; 5 bar; min bar 3,5 bar Gas connection panel: N2/C3H8/Air/CH3OH/NH3 Electrical connections: 3400 AC; 50 Hz; 221 kw; 3L+PE (3L: 3X 295mm2 ; PE: 1x95mm2) Control voltage: 24 VDC (230VAC) Electrical connections total: 270 kw Air supply: 7Bar Piloting system: Siemens It is capable of loading and treating 11 charges in one day. Find more here - / Contact us at -

System Installer: DSD Dillinger Stahlbau GmbH Technical Data: - F612 - 2 units each, diameter approx. 0.54m; length approx. 1.5m; volume 155l, built in 1990 - W613 - 1 unit each, diameter approx. 0.46m; length approx. 2.30m; volume approx. 280l, built in 1990 - B613 - 1 unit each, diameter approx. 2.30m; length approx. 2.62m; volume approx. 120l, built in 1990 - 612.3 and 4 - 2 glycol filters each, diameter approx. 0.4m; length approx. 1.6m; weight 0.3t; volume 100l Find more here - / Contact us at -

VA-04. Gas Drying – Absorber Systems (T610 Partial system, 2 absorber tanks, functional, Built: 1990 Complete system (control, etc.), cleaned System Manufacturer: DSD Dillinger Stahlbau GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 1.6m; Length approx. 6.9m; Mass 19.0 t; Volume 9000 l Find more here - / Contact us at -

VITO XS Vacuum Filtration System VITO X is best suited for restaurants, bakeries or establishments with a high frying volume. The VITO XS cleans the frying oil, holds it in its 40 l tank and offers easy, hygienic transport in the kitchen. Thanks to its unique vacuum filtration, the particles remain in the filter when dry. Like every VITO frying oil filter, the XS also offers a fine filtration of 5μm and thus the optimal quality of your oil is maintained. The unique design ensures that it also works at temperatures of 200°C, but at the same time offers the highest level of occupational safety. After filtration, the oil can simply be pumped back again. Advantages: Great savings potential Optimal quality Less work Filtration capacity: up to 30 L/min Filtration: up to 5μm Material: Stainless steel 1.4301 Weight: 45 kg Max. oil temperature: 200°C Tank capacity: 40 L El ...

A-05. Gas Separation System (F-608) Partial system, 1 tank type OKFA 900.140.1.10°/900.MZ.C, Built: 2017 Complete system (control, etc.), functional, cleaned Manufacturer: Otto Klein Filtertechnik Apparatebau/Engineering GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 1.2m; Length approx. 5.0m; Mass 7.7t; Volume 2400 l; 140 bar; Maximum filling mass: 2377 kg Find more here - / Contact us at -

Lift-tilt system height: 8,20m. Tilt system inlet dimensions: 1100 x 1200 x 1750mm Euromorm.

VA-12. Compressed Air Systems (Air Reservoir) 2 complete systems, functional, Built: 1991 Manufacturer: Otto Boge GmbH & CO.KG Each unit contains: - 1 BOGE compressor tank - Diameter: 1.20m - Length: 2.20m - Mass: 1.5 t - Volume: 2000 l - Pressure: 16 bar Each unit includes: - 1 compressor, Type K-TROCHL-KOMPR - Manufacturer: Kompressor HD Technik GmbH Mülheim/Ruhr - 1 motor Technical Data: - Intake capacity: 5-50 m³/h - Intake pressure: 1.03-1.35 bar - Temperature range: 5-30 °C - Motor type: SCHORCH K 3200 L - Model: B 1014-2, 24 kW, 400V Find more here - / Contact us at -

2. Other and Auxiliary Systems - SNA SNA-08. Air Technology System, 2 units Type Wolf KG 250, functional, Built: 1991 Manufacturer: Wolf Anlagen Technik GmbH Technical Data: 20250 m³/h; 10 kW; 1500 rpm; 1050 Pa Motors: 71M01 LOHER DNGW 160LB 04A; 5 kW; 380V; 1500 rpm; 50Hz, Built: 1991 71M02 LOHER DNGW 160VB 040; 5 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Find more here - / Contact us at -

SNA-10. 2 Emergency Power Systems - Complete System Manufacturer: Heinkel Aggregatebau GmbH Technical Data: - Heinkel SET HE500/396; 500 kW; 400 V; 722 A; 1500 rpm - IP 20, brushless synchronous machine AEG Rotaduct - 2 units Type DKBH4407/04; 3-phase AC; 280 kW; 400 V/404 A, 50Hz - 1500 rpm; 50Hz; cos φ 0.8; Built: 1991 - Diesel generator by MTU, Diesel tank: 1 unit, capacity: 1425 l - Starter battery; 2 units Hoppeke power HC 125300 - Dry cooler by Alfa Laval; 2 × 6 fans; 793.52 kW; each 50 m³/h - Ventilator: 90460 m³/h; Two-circuit cooler; Rooftop installation Find more here - / Contact us at -

for 100-600 g , 350 - 1000 g

Used cable pelletizing system for mixed and stranded cables. The machine has been overhauled and equipped with new tools. The turbine was re-mounted and the control panel was replaced. In addition, the material inlet control has been activated so that the machine can be used automatically. The hourly output depends on the cable up to approx. 250 kg/hour when using a 5 mm sieve insert. The attached video shows the system in combination with the dosing tank and plastic loading. These components can be supplied as an option. It is operated via a 63 amp connection at 400 V. The power consumption is 28 kW. The plant can be visited and tested at our premises. More information at infoRecyclinganlagen.info

Intelligent transport systems Brand: Formetal Type: diverse Wehrmann offers tailor-made transport systems for a wide variety of requirements. No matter whether it is about the transport of carcasses, single plates or stacks. For every transport task, however unusual, there is the optimal system, with a superordinate control that can recognize parts, send them on the right journey and integrate the connected machines. Roller conveyors, chain transports, webbing systems, link belt conveyors, turning stations, carcass erectors, carcass turners, etc ... All of these transport units, which are tailored to your requirements, are provided with a current touch-panel control computer, via which a complex line can be centrally and simply controlled. With a perfect design and tuning of the mechanical components, with a frequency-controlled speed control, both high feed rates can ...

Available quantity: 2 systems Year of Make: 2019 Weight: 6021 kg Rated current: 20 A Connected load: 12 kVA Disk laser: Trumpf 12-12-30-A32/11 with focusing optics (PFO) Laser measurement and determination: PRIMES FocusParamaterMontitor (FPM) Laser source: Trumpf TruDisk 5001 Welding fume extraction: HERDING Comp 1500-8/9 SB Year of extraction: 2018 Extraction volume: 2000 Bm³/h Included: HERDING Multicoater_MCI 55/1 dosing device for adding additives to the filtration process Enclosure cooling: RITTAL SK 3185830 The system was used to produce batteries.

description: In our warehouse in Knetzgau we currently have stored on 2.200qm more than 1000 used Siemens Control components. We are offering: priceworth materials without overhoul (EXW), projecting, turnkey projects incl electrics. Please let us know which components you need. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do ...

description: Fire protection closure for wallcrossing -Intumescent sealing system -No clearing of the closing area required if the conveyed material is non-combustible -No moving sealing elements -Small space requirements on the wall plate -System 1: 720 x 480 mm -System 2 : 440 x 480 mm All information without guarantee. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we ca ...

description: S7 control for full bottle transport. Partial range from filler to labeler. capacity range was approx. 55,000 beer bottles 0.33/0.5 l all information without guarantee Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking ...

description: It inspects the level after the filler with a gamma ray emitter. This system is working with a Krones Checkmat incl. push off band. Informations without guarantee. capacity: 5.000 - 50.000 Fl/h Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for o ...

Bread roll line Kövy Fortuna KM6 6-row - 6-row sliced roll line with magazine and head machine - with discharge - Fortuna KM6 Head Machine - Year of construction 2004

Hot foil stamping machine with original installation on the GTP model. In production.

MTA model TAE EVO M10 water chiller, cooling medium water with a temperature of max. 40°C, refrigerant R407c, refrigerant charge 0.800 kg, refrigerant working pressure max. 28.0 bar, temperature max. 64.5°C, electrics 230V/1Ph/50Hz, max. absorbtion 10.5A, installed power 2.20 kW, protection rating IP32, machine dimensions 550 x 600 x 800 mm (LxWxH), machine net weight approx. 74 kg.

For sale is a well-preserved pallet inspection system from the manufacturer BMS. Specifications: - Manufacturer: BMS - Type: Unicontrol P - YOC 2022 - All controls except for train control If you are interested, please inquire.

Knut Schneideer Sewing and Special Machine Construction Screening plant Serial number 001 Immediate availability Location Germany City of Erfurt (on the Haarberg) Number of screens: 3

Manufacturer: unknown, Year of manufacture: 1998, Filter system overpressure: yes, Volume flow m³/h: approx. 5000, Hose diameter mm!: 220, Number of filter chambers: 1, Fans pcs.: 1, 2. Extraction fan kW: approx. 4.5 Kw, Mass Length 2400 X Width 1800 mm Height 3900 mm/ Valve door installed in soundproofed box, Year of construction :1998

Frisch Spritzmatic Smartline Coating System Spraying System - Manufacturer: Frisch Vertriebs GmbH - Type: Smartline conveyor system - Egg spraying system - Compact conveyor system - Voltage: 230 volts - Power: 0.25 kW - Operating pressure: 8 bar - Year of construction 2010

Completely refurbished

Manufacturer: NESTRO Model: NE 250 J Year of Manufacture: 2023 Type of Machine: Dust Extractor Operating hours: 551.3 h Technical Specifications - Rated Airflow Volume: 2,950 m³/h - Rated Negative Pressure: 2,526 Pa - Filter Area: 22.4 m² - Connection Diameter (Suction Port): 250 mm - Weight: 930 kg - Max. Compressed Air Pressure: 8 bar - Motor Power: 5.5 kW - Operating Voltage: 400 V - Rated Speed: 3,000 rpm - Rated Current: 9.5 A - Frequency: 50 Hz Find more here - / Contact us at -