system storage used for sale

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The testing device can measure even the smallest leaks in packaging (helium detection)., The device is little used and in good condition., Information from the manufacturer’s brochure:, The detection limit of < 10-8 mbar l/s of the CONTURA Z can only be determined by mass spectrometric, Analysis can be achieved with a test gas., However, when sensitive flexible packaging is exposed to such a pressure difference,, the sealing seams could be subjected to such severe stress that the package could even burst., Such stress is eliminated by the patented membrane chamber principle of the CONTURA Z²., Function:, The product to be tested is placed manually or automatically on the bottom membrane. When the lid, is closed, the test procedure is initiated automatically., During the evacuation, the pressure of the atmosphere pushes the highly elastic membranes against the, packaging, and the conto ...

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Harald Baumgarten/Sema Systemtechnik Model: TM 400S Year of Manufacture: 2014/2015 Type of Machine : Angle Grinding System The system consists of the following components: - Cut-off grinding machine type TM 400 S with bundle loader (manufacturer Sema Systemtechnik, - rod breaking device, - Rod rotary drive / measuring station - Weighing station with section sorting, - Extraction and filtration system, - Soundproof booth (manufacturer: HüWa Schallschutz und Anlagenbau) and protective fencing - Four-column press (Manufacturer: Winter Presses) - Hydraulic power unit with hydraulic pumps - Control cabinet and control panel Find more here - / Contact us at -

Duplo System 4000 - 2xcollator with 10bins DC-10/60 - stitching and folding unit DBM 400 - Trimmer DBM 400T - short conveyor DBM ? 2xDC-10 collator, System 4000 - number of bins: 10 - paper size: min. 120x148mm, max. 350x500mm - paper weight: 0-300g/sqm - loading volume: 60mm - feeding system: belt suction feed system - conveyance system: roller belt conveyance system - power supply: 120 to 240 V 50/60 Hz - power consumption: 9.5A (120 V 60 Hz), 4.5A(220-240V, 50Hz) DBM-400 stitching and folding - paper size: min. 120x170mm, max. 350x500mm - process speed: up to 4200pcs/h - dimensions: 1448 x 686mm x 914mm - ratings: 120V 60Hz 8A - weight: 290kg DBM-400T Trimmer - booklet size: min. 85x120mm, max. 250x356mm - trimmed booklet size: min. 75x120mm - speed: ut to 4200 sets per hour - power consumption: 120V 60Hz 8.5A - dimensions: 1244mm x 700mm x 1067mm - weight: 200kg

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3D Systems ProX SLS 500 – Industrial SLS Printer | Year of manufacture 2014, Used SLS system for industrial polyamide production – full service history available, The 3D Systems ProX SLS 500 belongs to the most powerful industrial SLS systems in its class. With a large build volume and high laser power, it is designed for demanding serial and prototype production from PA12 and related powder materials. The machine has been professionally operated and is documented by the manufacturer 3D Systems with a complete, uninterrupted service history., Technical specifications, Manufacturer: 3D Systems, Model: ProX SLS 500, Year of construction: 2014, Serial number: 20012201106, Technology: SLS (Selective Laser Sintering), Software version: V 6.1.9, Max. laser power (per PM 11/2024): 101.4 W (with laser window) / 109.5 W (without), Max. laser power (as per PM 09/2025): 108.1 W (with lase ...

General SKU327X676 LocationBarneveld CEcheck MakeLauda Pressure Working pressure10 Bar Main Features Heating (medium)Water glycol Capacity7.5 KW Temp.140 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Water heatercheck Heating medium:water/glykol Electric capacity7,5 kW Temperature—25 / 140 °C Tank capacity50 l. With pumpcheck(2x) Capacity4 m3/h Motor2x 3 kW (400 V, 2900 rpm) With temperature controllercheck Information TypeTR350HT Mach.No.HKS08078 Year of construction2008 Mounted on framecheck With switchcheck With switchgearcheck Floorspace1,00 x 1,50 m Total height2,00 m Weight1500 kgTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destin ...

General SKU394U1111 LocationBarneveld CEcheck MakeLauda Pressure Working pressure3 Bar Main Features Heating (medium)Oil Capacity12.46 KW Temp.130 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Heating medium:Therminol D12 Electric capacity12,46 kW, 400 volt, , (Ex) Temperature-35/130 ºC With pumpcheck (2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) Information TypeTR400HK/K-EX Mach.No.HSK13074 Year of construction2013 With switchcheck Floorspace1,75x1,0 m Total height2,5 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  Capacity: 12 – 14 cycles/min (tray former) Application: Carton forming and sealing Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing Utilities: Voltage: 3 × 400 V Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) Air pressure: 0.6 – 1.0 MPa Rated current: 2 A (tray former), 3  ...

General SKU269N248 MakeBoldt Friesland engineering bv TypeBM-1500-S22L2 No.85-138 Mounted on framecheck Main Features MaterialStainless steel Volume1500 Ltr. Motor15 KW Specified Features - Ribbon blender Ribbon blendercheck Double shaftcheck Capacity1500 l Trough sizes1500 x 1150mm With covercheck Inletdia.600mm Outlet(2x) +/-500x200mm With jacketcheck With adjustable packing glandscheck Motor(2x) With variable speed drivefrequency converter MaterialStainless steel 1.4301 (304) Information LocationBarneveld With switchcheck With switchgearcheck Floor space2,6x2,0 M Total height2,6 M Weight1440 KGRibbon blendersNew arrivalsBoldt SystemsMixers > Ribbon blendersNew arrivalsBrand > Boldt Systems What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...

Pressure-tight clamping connection, formwork accessories, KRASO clamping connection -monolithic connection of the vulcanized KRASO locking disc -Easy installation -No assembly on site -simple closure of the clamping point -no complicated gluing of the sealing plugs -no labor-intensive rework -absolutely watertight clamping point -Tested to be watertight inside and out -from company liquidation -Total length: 300 mm -1 wire mesh box approx. 350 pieces -Weight: including box 142 kg

Screen keyboard, control cards for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: HAAS LASER -Control comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -Q-BW-Driver: 68.11.40 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 530/500/H135 mm -Weight: 14 kg

Air cooler, evaporator, cold cell, industrial cooler, cooling unit, cooler, water cooler, cooling system, cooling -Manufacturer: Gretag Cooler -Cooling system comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -for distilled water -Dimensions: 482/620/H177 mm 590/240/H705 mm -Weight: 37kg

Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/400/H88 mm -Weight: 5 kg

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems MAINS SUPPLY -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/530/H220 mm -Weight: 15 kg

Screen keyboard, control cards for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 Screen keyboard -3x cards type: EK-1 MPS 732/015 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 530/398/H290 mm -Weight: 18 kg

Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -1x card type: Gretac SPT 68.12.00 -1x card type: Gretac GPR 68.11.90 -1x card type: Gretac SIP 68.11.87 -1x card type: Gretac IOF I 68.11.96 -1x card type: II 34.74.11 -1x card type: Gretac GSP 68.12.24 -1x card type: Gretac ASP 68.12.36 -1x card type: Gretac GHD 68.12.28 -1x card type: Gretac HSP 68.12.32 -1x card type: Gretac CKB 68.12.48 -1x: Positive Switching Regulator PSR 128E -1x: Positive Switching Regulator PSR 510E -Dimensions: 482/400/H620 mm -Weight: 29 kg

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/500/H266 mm -Weight: 54 kg

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/540/H178 mm -Weight: 11 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Quantity: 1x unit available -Dimensions: 400/180/H500 mm -Weight: 32 kg

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor, digital interface balancer -Manufacturer: Balance Systems Balancing Unit B6 from CNC machining center Santenberg GTC S 2 -Terminal modules: Type 9SHVM2510NL000 (2 pieces) -Dimensions: 300/275/H130 mm -Weight: 5.3 kg

Pump control for centrifugal pumps, high-pressure pumps, water pumps, multi-stage vertical centrifugal pumps, control units, comfort control technology -Manufacturer: Wilo, control unit with control board / control card -Control device: Type CR system -Control card/board: 7022034.3 CR-LP-N 002 008 008 -Shipping/Price: complete -Dimensions: 270/230/H90 mm -Weight: 2.1 kg

Measuring machine, measuring and marking machine, coordinate measuring machine, coordinate measuring machine, form tester, clamping plate, marking and marking plate, measuring plate, measuring table, welding table, welding table, surface plate -Manufacturer: Stiefelmayer Type C-System -Digital display: Stiefelmayer type MZ 2000 -Travel paths: X 2450 mm, Y 1215 mm, Z 1645 mm -with: 6x adjustable feet -Accessories: see photos -Measuring plate: 2000/3000/H355 mm -Dimensions: 2540/3000/H2630 mm -Weight: 4660 kg

Carton sealer, packaging machine, carton sealing machine, carton sealing machine, sealing tape machine, adhesive tape machine -Manufacturer: Soco System, carton sealer type T-10 -Carton width: max. 500 mm -Dimensions: see photos -Accessories: in cl. 3 pcs. adhesive tape dispenser -Dimensions total: 980/860/H1560 mm -Total weight: 160 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Soco, conveyor belt, transport belt, belt conveyor from packaging machine -Speed: 21 m/min -Belt width: 380 mm -Conveyor length: 740 mm -Drive: 0.12 kW, see photo of nameplate -Transport dimensions: 780/640/H620 mm -Weight: 36 kg

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track -Manufacturer: Soco System, roller curve conveyor with drive, height adjustable -Rollers: Ø 54-80 x 355 mm -Speed: 14 m/min -Drive: 2x 0.12 kW, see photo of nameplate -Transport dimensions: 1500/600/H840 mm -Weight: 64 kg

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track, lightweight roller conveyor -Manufacturer: Soco System, non-driven roller curve conveyor, height-adjustable -Height: max. 710 mm -Rollers: Ø 48 x 15 mm -Number: 2x roller conveyor available -Price: per piece -Transport dimensions: 1470/600/H510 mm -Weight: 23 kg/pc.

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Soco System, Conveyor belt type 2EL016G-A, unused, original packaging -Width: 380 mm -Length: 1560 mm -Quantity: 2 pieces available -Price: per piece -Transport dimensions: 380/200/H130 mm -Weight: 1.4 kg

Cable winch, hoist winch, construction winch -Mechanical winch: with planetary gear without drive -hydraulic brake -Traction force: approx. 20,000 kg -Drum: Ø 500 mm -Rope diameter: 24 mm -Rope to be wound length: 2x 28 m -Number: 2x winches available -Price: per piece -Dimensions: 1640/700/H700 mm -Weight: 1026 kg/piece

table length: 1500 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 750 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0067 : 860 € : 1 : 515 mm : 220 mm mint condition divided The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0168 : prompt, Zwischenverkauf v : 2800 € : 1 : 190 mm mint condition 3 divided, 1x3500 1x2000 1x1000 mm slightly cranked The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ASPARAGUS PEELER, CHRISTIAENS AGRO SYSTEMS, TYPE: 1350-6 Technical description: Machine number: 062 906 Heads number: 6 Power supply: 380-440V/50-60 Hz Dimensions: 1650 x 2000 x 1600 mm

table length: 1000 mm table width: 1000 mm table height: 100 mm bore: 16 mm weight: 200 kg Special offer: Exhibition use – slight scratches on the surface Features: - Surface holes in a 50x50 mm grid - Holes in the side panels in a diagonal grid - 4 feet – standard configuration 750 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 – 13 mm - Side panel made of high-quality steel S355J2+N + plasma nitriding - Hole Ø 16 mm - Corners, edges and holes rounded - Side panel height 100 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm Special item: The holes in the bottom row of the side panel do not fit or fit only partially. This affects approx. 45 holes. Signs of wear in the plasma nitriding Features: - Holes in the surface in a diagonal pattern - Holes in the side panel in a diagonal pattern - 6 feet – standard configuration 650 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Side panel made of high-quality steel S355J2+N + plasma nitriding - Hole Ø 28 mm - Corners, edges and holes rounded - Side panel height 200 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0137 : 1960 € : 1 : 3000 mm : 190 mm slightly cranked The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Agitator bead mill / bead mill Manufacturer: Netzsch Type LMZ 2 – ZETA system Power 6 kW Weight approx. 280 kg Grinding chamber volume approx. 1.6 litres Regrind volume approx. 0.8 litres Grinding vessel cantilevered attached Agitator speed infinitely adjustable via frequency converter Drive from the motor via belt drive to the drive shaft. Documents available

Precise fill level control for detecting underfilling and overfilling of bottles., P max: 10 bar, Current: 8 A, Voltage: 230 V, Frequency: 50 / 60 Hz, Length: 1,2 m, Width: 0,93 m, Height: 2,2 m, Weight: 350 kg, Features: detection of fill height and closure, inkl. mouth blowing and discharge with collecting table

Additional title: Residual liquid, bottom, mouth, sidewall control, Capacity: 32000 bottles/h, Power: 3,6 kW, Voltage: 400 V, Frequency: 50/60 Hz, Compressed air: min. 6 - max. 10 bar, Length: 2,5 m, Width: 1 m, Height: 2,5 m, Weight: 1700 kg, Formats: Longneck-, Steini-, Vichy- 0,33 l bottles / 0,5 Longneck-, NRW- 0,5 l bottles, Running direction: right-left, Operation / Control: Heuft, Features: residual liquid, bottom, body, mouth, side wall

Inspection unit for checking beer crates for missing bottles., Additional title: with cap detection, Current: 4 A, Voltage: 230 V, Frequency: 50/60 Hz, Compressed air: min. 6 - max. 10 bar, Length: 0,7 m, Width: 0,74 m, Height: 2,1 m, Running direction: Crosswise, Features: inspection over closure detection, with integrated conveyor stopp

This label and fill level inspection system from Heuft Systemtechnik GmbH (built in 2010) is designed for high-frequency fill level inspection, label checking, and product rejection. The system features the Heuft Delta FW 10 rejection unit for precise and reliable removal of non-compliant bottles. With a capacity of up to 40,000 bottles per hour, it enables efficient quality control in high-speed production lines. The device has a compact footprint of 0.44 m × 0.80 m × 2.24 m and weighs 150 kg, making it easy to integrate into existing filling lines. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: Heuft Spectrum TX, Capacity: 40000 bottles/h, Length: 0,44 m, Width: 0,80 m, Height: 2,24 m, Weight: 150 kg, Features: Heuft ejection unit Delta FW 10

Additional title: Control cabinet with touch panel, Voltage: 110-240 V AC, Frequency: 50-60 Hz, Length: 500 mm, Width: 580 mm, Height: 210 mm, Weight: 35 kg, Operation / Control: touchpanel

table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm Special item: Hardness not achieved and a blemish on the surface Specifications: - High-quality S355J2+N steel + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole diameter 28 mm - Surface hole pattern 100x100 mm grid - Corners, edges, and holes rounded - Side panel height 200 mm - Hole spacing on side panel 50 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise setups - 6 feet - Standard configuration 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: WA0136 : 3150 € : 1 : 8 mm : 3 x 1.000 & 1 x 1.050 mm complete 30° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CHRIST PACKING SYSTEM WRAPPING MACHINE FILMTEQ 3030 Fully automatic wrapping machine with innovative sealing unit with automatic spindle locking, for secondary packaging of products using polyethylene film. Modular configuration for integration with other machines and systems, with ergonomic balcony technology for quick format changeover. Ideal for industrial applications that require efficiency, accuracy and adaptability. Built in 2015. CHARACTERISTICS - Production: up to 60 cycles/minute - Wrapping material: Low-density polyethylene film (LDPE) - Packaging type: Single band wrap, with side shrink, or full wrap - Film width: From 30 mm to 300 mm - Maximum reel diameter: 400 mm - Grouping dimensions: (L): 60–400 mm/(W): 60–240 mm/(H): 30–230 mm - Single product dimensions (with stacker): (H): 15–400 mm/(W): 15–90 mm/(H): 60–240 mm ENERGY ...