system storage used for sale

Consisting of 2x KAMPA 53860 steering axle and 1x KAMPA connecting axle, payload 7500 kg, dead weight 1600 kg, max. travel speed 6 km/h Auction-ID: A1-45682-40

Output 60 kW, built in 2024, incl. COSMOTEC EXW air/water heat exchanger Auction-ID: A1-45682-16

Output 60 kW, built in 2024, incl. COSMOTEC EXW air/water heat exchanger Auction-ID: A1-45682-20

Without electronics, incl. LG monitor Auction-ID: A1-45682-28

Consisting of 2x KEYENCE IV-HG10 Analyzer, 3x KEYENCE MU-N11 Multi Sensor Controller, 3x KEYENCE LR-W500C Full Spectrum Color Sensors and 2x KEYENCE IV-HG500CA Vision Sensor Head Auction-ID: A1-45682-50

Consisting of 1x KEYENCE XG-X2700 image processing controller, 2x KEYENCE CA-H2100M industrial camera (21 megapixels, f = 50 mm) and associated cables Auction-ID: A1-45682-48

Manufacturer: Nutek Model: NTM530WSXL-1800-3-AW Year of Manufacture: 2010 Machine length: 1800 mm Belt segments: 3 Maximum PCB width: up to 460 mm (XL size) Maximum PCB length: up to 460 mm (XL size) Voltage: 230 VAC, single phase Power: 250 VA Weight: 190 kg CE Certified Find more here - / Contact us at -

CONTROLS   CNC controls SLM ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2600 mm   space requirements -front/back-: 1200 mm   total height: 2700 mm Machines in excellent condition serviced annually by the manufacturer (service reports available). ... Accessories: - HRS050 L/W cooling package, - PSM100 V3 sieving station, - BPH280 handling unit and bottle lift, - Material change kit, - SLM280 2.0 complete including PSM100, - Powder hopper, - Substrate plates (1.2709 & AlSi10Mg), - Additional filter housings and filter elements, etc. Build volume: 280 x 280 x 365 mm minus substrate plate height Machine configuration: Single optic, 1 x 700W Build rate: up to 113 cm³/h (material dependent) Laser lifespan: 1500 h Variable layer thickness: 20 μm - 90 μm Min. feature size: 150 μm Focus diamete ...

1.1 Kw. 400 V. 50 Hz. 2.5 A. Very little use. With 4m arm. The mobile extraction system reliably filters the fumes and dusts produced during welding work with non-alloy steels and stainless steels. The unit is IFA approved for welding fume class W3. The degree of separation is greater than 99%. The clean air then returns to the work area. Made in Germany.

Excellent condition - Fully operational - Loading / Transport possible! motor 15 kW, shaft width 600 mm, shaft depth 800 mm, rotor

Precision welding system B&K PIGGY Welder 2 power, sterero microscope W10X/20, S/N 51680252

Card milling system MÜHLBAUER consisting of 3 elements 1 pc. mod. SCM 5000 built 1999, S/N 1827, 230 V AC, 1 pc. mod. SCM 525, built 2012, S/N M-10416, 400 V AC, total 2 units

PLC Card Withdrawal Handling KST System No. 418/2006-12, PLC control incomplete, control cabinet, not exactly visible

PLC Card Withdrawal Handling KST System No. 037/2007, 400 V/50 Hz, PLC control, control cabinet, not exactly visible

PLC Card Withdrawal Handling KST System No. 009/2007, 400 V/50 Hz, PLC control, control cabinet, not exactly visible

PLC Card Withdrawal Handling KST System No. 035/2007, 400 V/50 Hz, PLC control, control cabinet, not exactly visible

Injection moulding machine/ card removal system FERROMATIK MILACRON EE155 built in 2007, S/N 427087, clamping force 1,550 kN, international size 1,550H-300, injection pressure 1,943 bar, displacement 154 cm³, 400 V/50 Hz, motor 19.7 kW, heating 11.2 kW, weight 7.4 t, control Mosaic, touch panel SIEMENS Simatic, machine no. 163

Including: Sony SVO9500SD0 Video Cassette Recorder Sony UUP890MD Video Graphic Printer Mitsubishi CP700 Printer Fujitsu MDC3064SS External Drive Auction-ID: A1-45803-47

Injection moulding machine/ card removal system FERROMATIK MILACRON EE155 built in 2007, machine no. 427100, clamping force 1,550 kN, international size 1,550H-300, injection pressure 1,943 bar, displacement 154 cm³, 400 V/50 Hz, motor 19.7 kW, heating 11.2 kW, weight 7.4 t, CNC control, touch panel SIEMENS Simatic, w. 036/2007, Masch.-Nr. 162

Fully equipped sales counter system consisting of KRAMER refrigerated counter \"Primo UB\" with roundabout corner and snack module XTENSO Flexline GN 3/1 (hot/cold). The total length is approx. 8.85 m. The system has glass tops, night covers and integrated sockets. Equipment: – Convection cooling with central connection R513a, temperature range +1 °C to +7 °C – Stainless steel version with wood décor EGGER H1487 ST22 – Nero Assoluto granite worktops – Glass elements with safety glass, rotatable or foldable – Snack module with black glass display, switchable for hot/cold operation – Preparation for up to 3 Mettler Toledo Freshway V scales – Additional elements: night cover compartments, hook rails, cup dispensers, drawer elements Sold as shown, in the existing condition and with the visible extent. Pick-up, removal and transport are to be fully organised by t ...

1) Grain trough with integrated discharge conveyor, conveying capacity: approx. 10t/h, trough length: approx. 4500mm. 2) Two silos with bucket elevator and distribution screw conveyor, height: approx. 8500mm, conveying capacity: approx. 10t/h, motor power: 1.5kW, gearbox speed: approx. 80rpm, silo volume: approx. 18m³. 3) Side channel blower with blow-through rotary valve Becker SV 8.130/1-01 DSF, speed: 3400rpm, air volume flow: 145m³/h, final compression pressure: 120mbar. 4) Radial fan with V-belt drive GRBO6630, flow rate: approx. 34m³/min, motor manufacturer: Siemens, motor power: 7.5kW, speed: 2930rpm. An on-site inspection is possible.

Work piece handling system manufactured in 2014. This LOHMEIER Schräglademagazin features adjustable material lengths of up to 12,000 mm and can handle materials ranging from 20 to 120 mm. It has a maximum load capacity of approximately 30 kg per meter of magazine length and includes pneumatic material alignment to the machine axis. If you are looking to get high-quality handling capabilities, consider the LOHMEIER Schräglademagazin we have for sale. Contact us for further details.

A complete layer palletizing system IW-Anlagentechnik with a pallet wrapper Tosa and pusher technology is available. Process chain: product infeed-layer formation-palletizing-transport-wrapping. 1) Palletizing system IW-Anlagentechnik PMS 120, year of construction: 1992, rotating unit: 90°. 2) Conveyor technology Transpak. 3) Rotary ring stretch wrapper Tosa 124E, year of construction: 2010. The system was used in the food industry for palletizing bottles and other liquid containers. Documentation available. An on-site inspection is possible.

A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible.

Chocolate Enrobing Machine Dedy 220 Mesh belt width 220 mm Belt speed infinitely adjustable Working direction from left to right Stainless steel version Connection 220V Used machine as good as new & SAB tested with warranty + spare parts service

This 6-axis Axial PHS-W-124 was manufactured in 1999. It features a bending force of 120 tons and a bending length of 4 meters, with a stroke of 200 mm. The machine is equipped with a Wila tooling system and a Step Automation Rock 17+ control with a 3D editor. If you are looking to get high-quality bending capabilities, consider the Axial PHS-W-124 pallet handling system we have for sale. Contact us for further details.

Ethos X Microwave Extraction -Currency: MYR PIC: - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)

Fully driven roller conveyor Approx. 670m total length Year of construction 2017 Roll width 600mm Consisting of - Different element lengths : 3m elements / 2m elements / 1m elements - 16 scales - 15 curves of 90° each - approx. 20 rollers stroke - turner / corner turner - 3 x Apollo spiral conveyors Location : 42781 Haan Ready for collection from 01.08.2026

Chip extraction system SPÄNEX SMU 100 built in 2019, 10,000 m³/h, 3,000 Pa, 400 V 15.0 kW, dead weight approx. 930 kg, control Siemens Simatic HMI, stands on a gallery, with briquette press SHB 70R, briquette capacity approx. 60 - 90 kg/h, size briquette D 70 mm, L= 30-70 mm, purchased 08/2019 for ? 65,000 net, presumably. incl. installation costs

Test system left B-pillar top WZ54.01 left and right, each approx. 160 cm, 2 workstations

Double workstation pipe system/real wood panel approx. 160 cm, superstructure, lighting, internal workstation 503

For sale is a used CEMO spray system with a 500 liter tank (suitcase-shaped, with steel runners). The system is expressly sold as defective or as a spare parts donor. Details: • Manufacturer: CEMO • Tank volume: 500 litres • Year of manufacture / inspection: 2023 (see nameplate) • Incl. pump, control system (HCW City Sprayer / epoke), valves and attachments • Electrical components available Condition: • Significant signs of wear and dirt • Partly heavy rust on pump and metal parts • Functionality not tested / presumably limited • Fuel cap is missing • Sold only for cannibalization or as a spare parts carrier Auction-ID: 04F-QBK-2

Auction-ID: A1-43332-64

Auction-ID: A1-43332-2

Auction-ID: A1-43332-46

An industrial inline cleaning system Dürr with a retrofit from 2013 is available. Batch dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 100kg, throughput capacity: approx. 8batches/h, throughput weight: approx. 800kg/h, max. bath temperature: 70°C, max. air temperature: 130°C, stations: 5, machine dimensions X/Y/Z: approx. 6250mm/2450mm/3000mm, control system: Siemens Simatic S7. The temperature control of the system is defective. Including a Geltz ion exchanger circulation system. Documentation available. An on-site inspection is possible.

A complete compressor system is available. 1) Screw compressor German Blast 22, year of manufacture: 2011, motor power: 22kW, operating pressure: 10bar, air flow rate: 190m³/h, machine dimensions X/Y/Z: approx. 1100mm/750mm/1450mm, weight: approx. 500kg, operating hours: 27305h, load hours: 10050h. 2) Compressor Rotorcomp, max. operating pressure: 15bar, max. operating temperature: 110°C. 3) Pressure vessel IPL, year of manufacture: 1997, volume: 1000l, max. operating pressure: 10.5bar, max. operating temperature: 50°C. 4) Air dryer German Blast BT-220. 5) Water separator. Documentation available. An on-site inspection is possible.

Two Belimed cleaning and disinfection devices RDG with integrated drying are available. Washing chamber dimensions X/Y/Z: 690mm/630mm/800mm, usable volume: 350l, coarse filter: 2mm, fine filter: 1.5mm, drying temperature: 110°C, air filter: HEPA H13, separation efficiency: 99.95%, A0 disinfection value: 3000. Machine dimensions X/Y/Z: approx. 1850mm/900mm/950mm, weight: approx. 400kg. Documentation available. An inspection on site is possible.

3-row layout Output up to 3,000 pieces of SQUARE or ROUND rolls p/h Weight range for square rolls approx. 40 – 150 g/piece Weight range for round rolls approx. 40 – 85 g/pc (incl. knitting drum 55/80gr) completely stainless steel clad with TOUCH computer control incl. div cutting rollers incl. 3 stamps / + # + sun with humidification and turntable sprinkling station Application: e.g. rustic rolls, shaped rolls, round rolls Ciabatta, cobbler's boys, mini baguette, etc...

Serial No.: 2018k000171444 Rated voltage 230V 50 Hz Total cooling capacity 1490 W Temperature range 15 / 43°C Year of construction 05/10/2018 Weight 46 kg Auction-ID: A1-45977-325

Mobile workbench with contents and attachment of Objekt-Systemfloor, contents including Makita cordless screwdriver, paint spray cans, fan heaters, banknote detectors, built-in cylinders, spacer blocks, Bosch cordless screwdrivers, clamping lamps, small parts, power distributors, paint spray cans Auction-ID: A7-45960-27

Mobile workbench with contents Object system floor, Mobile workbench system with contents such as boxes + tension belts, screws, barrier tapes, power distributors, castors + other materials Auction-ID: A7-45960-18

Connected load: 400 V Refrigerant: 95g / R134a Compressed air supply: 5-8 bar Printer: Star DP8340S Year of manufacture: 08/2002 Auction-ID: A1-45977-11

: neu : ca. 8 Wochen ab Auftragse : Deutschland : 3212 € : 3000 mm : 820 - 940 mm : 300 kg/m : 350 mm : 63 x 3 mm : 15 mm : 2600 mm : 250 mm with mm-scale and magnifier on stop carriage rolls and table with manual measuring system and a rigid flat steel guide stop carriage 6-fold ball bearing mounted, manually slideable and fixable fold up material stop FURTHER LENGTHS: 2 meter € 2.665,- 4 meter € 4.077,- OPTIONS: material depth stop arm sprung and adjustabel up to the mechanical zero (man. dischargeable by eccentric lever SZ 05 € 515,- cover plate between the carrier rollers, galvanized per running meter SZ 06 € 119,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUEST. (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COMPLETE WASTE WOOD DISPOSAL LINE RUDNICK & ENNERS – built in 2011 For sale is a complete waste wood disposal plant of the Rudnick & Enners brand, built in 2011. The line consists of 20 positions and was used for the automatic removal, sorting and processing of rinds, chips and waste wood in a sawmill. The plant has a modular design, dismantled, in very good condition and immediately available. Technical Overview – Items 1 to 20 01 – TKF offset by reducer, W 600 mm 02 – Viborinne 1 trimming line, L 13.0 m, W 650 mm 03 – Viborinne 2-trimming line, L 15.0 m, W 650 mm 04 – Viborinne creel line, L 8.50 m, W 500 mm 05 – Viborinne 1-gang line, L 10.0 m, W 500 mm 06 – Viborinne 2-creel line, L 9.0 m, W 500 mm 07 – Viborinne creel roller table, L 7.50 m, W 500 mm 08 – Viborinne resawing line, L 11.0 m, W 650 mm 09 – Viborinne recut li ...

-Thermal CTP Year 2010 -64 diodes -Plate Count: 196,000 plates done -Exposure Time: 25,500 hours -Internal plate punch system -Blower Unit External Screen BU 800 -Min Plate Size: 304 x 370mm; Max Plate Size: 1160 x 940mm. -Maximum Imaging Area: 1160 x 924mm. Plate Thickness: 0.15 - 0.30mm. -Resolution: 2400 dpi -Productivity: Up to 23 plates/ph at 2400 dpi -Conveyor to Plate processor Agfa Elantrix 125 SX for thermal plates -Plate stacker Elantrix ST 125 EX and trolley -Complete with RIP Agfa Apogee Prepress and Workflow, computers and monitors -Available immediately

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 300,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 400,-

-Terminal with Smart Shop System for individual shopping experience in self-service operation. -Scanner -Software -Screen -Built-in receipt printer Auction-ID: A7-46036-1

Bread roll system Year of construction 2010 consisting of: Head machine MINI REX Futura Proofer G 2000 with Stüpfler for Kaiser, with long-rolling station