141,810 used machines on RESALE, but how to find them? Machine Search
System for wet chemical processing of wafers up to 12in, substrates up to X/Y 9in/9in, stand-alone housing, process modules, PP process chamber, 2 programmable media arms, rotational speed 1-4000rpm, acceleration ramp 1-3000rpm, spin time 1-999s, exhaust process bowl 2x DN110, chamber 2x DN110, housing 1x DN110, control 1x DN110 (each approx. 200m³/h), CDA 8+/-2bar, vacuum -0.8+/-0.2bar, nitrogen 4.0+/-0.5bar, 3 media drains, waste box for 2 concentrate wastes, reagent box with pressure vessel, 4 Julabo thermostat baths. The system was dismantled during disassembly. Viewing possible by arrangement.
A Cimbria optical color sorting machine for bulk materials is available. Nominal throughput capacity: approx. 7t/h, chutes: 7, sorting width: approx. 1200mm, max. number of defect parameters: 16, discharge precision: +/-0.5mm, accuracy: over 99%, inlet height: approx. 2500mm. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2200mm, weight: approx. 1200kg. Documentation available. On-site viewing is possible.
Central oil and grease lubrication system, MFE5-BW30 + KFG1-5W2 Vogel, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Central oil and grease lubrication system consists of: 1) Central lubrication (oil) MFE5-BW30-S7+299, Vogel 30L, 0.5L/min., max. 27bar 2) 2 piston pump units (grease lubrication) KFG1-5W2-M+924, 24V DC, Used! The part was purchased from a certified company's spare parts warehouse, is in good condition and fully functional. We have tested the system's pumps: Oil pump test: it delivers immediately. Test of the 2 grease lubrication piston pumps: The agitator starts immediately and grease delivery begins. If you are interested, we would be happy to show you the test on video. The system can be viewed, tested and collected from us at any time. The level sensor on the oil tank may be faulty, which has been tak ...
Central oil and grease lubrication system, MFE5-BW30 + KFG1-5W2 Vogel, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Central oil and grease lubrication system consists of: 1) Central lubrication (oil) MFE5-BW30-SZ, Vogel 30L, 0.5L/min., max. 20bar 2) 2 piston pump units (grease lubrication) KFG1-5W2-M+924, 24V DC, Used! The part was purchased from a certified company's spare parts warehouse, is in good condition and fully functional. We have tested the system's pumps: Oil pump test: it delivers immediately. Test of the 2 grease lubrication piston pumps: The agitator starts immediately and grease delivery begins. If you are interested, we would be happy to show you the test on video. The system can be viewed, tested and collected from us at any time. The level sensor on the oil tank may be faulty, which has been taken i ...
A CNC gantry plasma and flame cutting machine is available. Working dimensions X/Y: 6500mm/2500mm, power source: Kjellberg, max. number of torches: 3, control: Heidenhain TNC 355. An on-site inspection is possible.
new motherboard with Part Number 503-00286A or Visible Number 637-00173A-A
CNC Portal Plasma Cutting Machine with Skew Rotator Bevel Bevel Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2020 CNC Control: Global Control Plus Working area: 3 x 12 m Track width: 4,000 mm 1 oxy-fuel burner ALFA 1 plasma torch with Skew Rotator Bevel bevel unit Power Source Hypertherm XPR300 Cutting thickness: 50 mm hole piercing 80 mm cut-off Extraction table Beuting without filter system Software: Omniwin with Bevel
Source: TruPulse 124 Wavelength of the laser light:1064 nm Maximum average power:140 W Minimum pulse output:300 W Maximum pulse output:6 kW Minimum pulse duration:0.3 ms Maximum pulse duration:50 ms Maximum pulse energy:30 years Maximum pulse repetition rate:833 Hz Beam parameter product:16 mm-mradX-axis:450 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmY-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.1 mm Repeatability:± 0.02 mm Z-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmRotary axis Turntable:120 mm Free inner diameter:45 mm Maximum speed:80 rpm Diameter of three-jaw chuck:80 mm Central passageways:16 mmClamping range, inside:2-71 mm Clamping range, outside:22-69 mm
Offered is a cleaning and degreasing system with steam extraction fan and oil skimmer, year of construction 1996, basket: Ø720mm, internal height: 140mm, workpiece: maximum usable height: 450mm, maximum batch weight: 500kg, overhaul: 2011: completely overhauled, renewed: gear motor, heater, gas spring and heating elements, documentation: operating manual, technical documentation and CE declaration of conformity available, overall dimensions X/Y/Z: 1190mm/1170mm/1170mm, weight: approx. 290kg. Inspection: possible by appointment.
A Dr. Fritsch segment soldering machine for the automatic soldering of segments (typically diamond segments) onto carrier tools is available. An on-site inspection is possible.
CNC Laser Cutting Machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of Make: 2012 CNC Control: iMSNC Windows Laser hours approx.: 4,000-5,000 Laser power: 2.5 KW Processing area: 3,000 x 1,500 mm Sheet thickness steel (max.): 15 mm Sheet thickness stainless steel (max.): 8 mm Sheet thickness aluminium (max.): 8 mm Working Temperature: + 10 to + 30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet left Æ 250 mm Laser Source IPG Ytterbium Laser System YLS 2.5 kW Laser Chiller LC 170.01-A.3.5 Voltage: 400V/3P/50Hz Filter system TEKA 4H 5.5 kW External dimensions of the entire system: approx. 10,400 mm x 3,610 mm
Lister KL5L air-cooled chiller Manufacturer: Lister Type KL 5 L kW: 3.25 Voltage: 400 V Frequency: 50 Hz 6.3 Amps Refrigerant: R 134a Max. operating pressure: 13 bar Dimensions: (WxDxH) 940 x 560 x 1100 mm More items - new and used - can be found in our shop! International shipping costs on request!
Dimensions (L/W/H): 1920x3520x6300 mm Weight: 2500 kg Total power requirement: bis max. 22 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stainless steel clad TOUCH control composed of: Head machine type K5/4 Weight range up to 110gr Proofer Premium K with lateral pretzel discharge with cutting station with 2 long-rolling stations with sheet metal deposition - Bakery condition/not cleaned
Dimensions (L/W/H): 1170x560x570 mm Weight: 55 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible.
Dimensions (L/W/H): 600x700x1050 mm Weight: 120 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4590x1100x2500 mm Weight: 1000 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 670x770x1203 mm Weight: 142 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 750x2000x2000 mm Weight: 190 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 750x1400x2000 mm Weight: 137 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 5470x1100x2500 mm Weight: 1100 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 900x560x570 mm Weight: 50 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3480x1100x2500 mm Weight: 900 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4100x1200x4920 mm Filter capacity: 53,08 m² Number of filters: 96 St. : 400 mm Weight: 1230 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1685x765x650 mm Weight: 91 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 355 mm : 12500 m³/h Motor output: 15 kW : 4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3460x1000x2400 mm Number of filters: 73 St. Number of dust containers: 4 St. Weight: 410 kg : 355 mm : 520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 355 mm : 10000 m³/h Motor output: 11 kW : 4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 5000 m³/h power capacity: 5,5 kW Speed: 3000 U/min. : 280 mm Dimensions (L/W/H): 2460x1250x1600 mm Weight: 380 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 3000 m³/h power capacity: 2,2 kW Speed: 3000 U/min. : 200 mm Dimensions (L/W/H): 1250x700x2000 mm Weight: 160 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1180x860x710 mm Weight: 175 kg Total power requirement: 3,7 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 920x2100x2150 mm Weight: 300 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 920x2260x2150 mm Weight: 300 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1000x3000x2200 mm Weight: 450 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1600x840x720 mm Weight: 210 kg Total power requirement: 5,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 500x550x1050 mm Weight: 80 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1920x4685x6300 mm Weight: 2500 kg Total power requirement: bis max. 30 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used oven system / deck oven system, with 1 deck oven Wachtel Columbus E 920/324 TCOMFORT, 9 shelves, 180 cm wide, 200 cm deep (with touch control and gas burner), with 3 wood ovens Crosta 3.18.20, each 3 shelves (with pellets), with 1 loading and unloading Wachtel Comfort loader (with Wachtel WinServer), built in 2016, in bakery condition, for self-dismantling, ran perfectly until the end
Plant is sold checked and cleaned. Condition: fully functional, signs of use Availability: immediately Sowing: available Weights (rolls): from 50 g Seeding station: yes
Angle system SCM Windows and doors manufacturing system Type MULTIFLEX C Year of construction 1992 Aggregates as follows Cross-cut saw motor power 3 kW Slotted spindle motor power 7.5 kW Profile spindle motor power 5.5 kW Profile spindle motor power 5.5 kW Glass bead saw motor power 2.2 kW Minimum workpiece width 35 mm, maximum workpiece width 140 mm Milling spindle diameter 50 mm Maximum clamping length 320 mm Feed speed 3-15 m/min. Feed motor 0.75 kW Spindle diameter glazing bead saw 25 mm Swivel control panel with electronic control Memory capacity of up to 100 programs The height adjustment of the journal and profile spindles is carried out by means of an electronic positioning device with 3 axes Automatic Rolling Table with 2 Speeds In a compact design With pull-out workpiece support With workpiece return No tools required Space requirement 3860 mm x ...
Offered is a cleaning system for assemblies in electronics manufacturing: Functions: injection flooding with compressed-air support, vacuum drying, 100% recirculation (closed loop), MPC-cleaner compatible. Technical data: cleaning tank 80L, rinsing tanks 2x 60L. Stainless steel construction. Dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 700kg, including operating manual, data sheet, CE declaration. Viewing possible by arrangement.
Dimensions (L/W/H): 1400x750x2100 mm Weight: 220 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2000x750x2100 mm Weight: 250 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2100x920x2250 mm Weight: 410 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2260x920x2250 mm Weight: 450 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3200x1000x2300 mm Weight: 630 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 600 x 800 mm Motor output: 15 kW 0: 0,6 m³ Diameter of the motor: 260 mm Dimensions (L/W/H): 1.805 x 1.118 x 1.646 mm Weight: ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ------------------------------------ Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 8 ...
TWO HHS HOT GLUE SYSTEMS to install on any folder gluer or any similar machine- from 1 to 4 glue points- years 2001/2006- Programmation- without guns- Price: 1.000 euro each LOT.
A 2-tank spray/flood cleaning machine Mafac is available. Basket dimensions X/Y/Z: 660mm/480mm/338mm, max. batch weight: 100kg, spray pressure pump power: 7.5kW, spray cleaning directions: 5, basket batch flooding: 50%, filling volume: 830l, heating power: 30kW. Machine dimensions X/Y/Z: approx. 2200mm/1500mm/2050mm, weight: approx. 1400kg, control: Siemens Simatic S7-1500. Documentation available. On-site inspection is possible.
maximum number of results exceeded
please refine your search
