syrup plant used for sale

2020 Viscotec Semi-automatic syringe filling system for dronabinol. The filling system is equipped with a storage container for heating the dronabinol to 60 – 70° C and keeping the Temperature constant during the filling process. The syringe is filled through the syringe tip and under a protective gas atmosphere (e.g. argon). No air should remain in the syringe. The filling system is suitable for the filling amounts of 265 mg, 530 mg or 1060 mg with tight tolerance limits. The dosing accuracy of the Pharma Dispenser 3VHD8 (0.35ml / U) amounts 1%. The repeat accuracy is > 99%, depending on the material. Detailed material data are currently not available. The determination of the actual dosing accuracy and dosing time takes place during commissioning. The customer is taking care of the process development. The storage container has a capacity of 500 ml and withstands a pressure of 0  ...

Sybermat Denester for "Hypacks" of 100 Syringes - Tubs of nested syringes arriving for example from a filling line, are denested by a robotic arm with suction cups into denesting combs. The syringes are then dispensed from the combs into the inspection machines or any other machine. Suitable for pre-filled syringes 10.85 mm diameter, max. 105mm long, output up to 20.000/hour. Year 12/2002.

Corima AEC212 Syringe Labeler and Plunger Inserter with Plunger Unscrambler and Label Easy-Splice It is an automatic, continuous motion machine for syringe plungering and labelling. Main features: • Perfect operational repeatability; • Easy to use; • Minimal installation space; • Designed to manage each component with positive logic; • Totally customizable, with wide choice of optional units (e.g. Vision system, printing systems, feeding systems, etc); • High flexibility and capacity to process glass or plastic syringes. Standard constructional specifications: • Automatic syringe loading on roller conveyor; • Automatic loading of the plungers with elevator and roller conveyor or with vibrating feeder; • No syringe – No plunger loaded; • Totally parameterizable screwing unit; • Plunger assembly control; • External labelling unit complete with unwi ...

Brevetti ATM 15 duplex (2 x modules) automatic inspection machine for syringes, currently set for 10.85mm diameter syringes (long and short needle), output up to 133/minute per module (266 per minute total). Each module is fitted with 6 control stations for presence of bung, reflective particles, fill height and bung position, needle cover, non-reflective particles, plus turbidity meter. Each module has 3 reject channels plus pass. One module is ATM15 SX year 2008, the second is ATM15 DX year 2007. Both units operate from one control panel.

• Fully automatic inspection machine for prefilled syringes with water-based, clear solutions, not suitable for protein solutions • Maximum output 12,000 ampoules/hour • For prefilled syringes diam. 6.85-14.45 mm, height incl. flange and needle guard max. 120 mm, flange diam. max. 24 mm, depending on format set • Automatic syringe feed from upstream machine via screw conveyor • Syringe turning station for foreign objects and liquid residues in the needle • Rotary device for foreign object detection • 3 CCD cameras for - Reflective foreign object detection station (foreign objects such as glass, white spots, etc.) - Non-reflective foreign object detection (colour dots, colour blocks, metal chips, etc.) - Reflective or non-reflective foreign objects and aluminium hydroxide detection station • 1 inspection station for flange damage and missing pistons • 1 inspection stat ...

Fully automatic system for filling nested disposable syringes and closing with plunger stoppers, consisting of 4 Bausch+Ströbel components: • TUM 9070 Tub unpacking machine for removing the cups from the bag using a sliding device • DVE 9070 Cover and protective film removal • SFM 5072 Filling and sealing machine • NTS 8140 Transport system • Output max. 36,000 disposable syringes/h, infinitely adjustable • For disposable syringes 0.5 - 10 ml depending on format set • For plunger stoppers diam. 5.00 - 21.00 mm, H 7.00 - 15.00 mm depending on format set • For 100 mm nest • For tub H max. 130 mm • Parts in contact with the product made of stainless steel AISI 316L • IQ/OQ qualification documentation in accordance with Annex D5 GAMP 5 and Annex 15 EU-GMP in English • Calibration (KAL) for all process-relevant measuring systems • Material specification • PLC Siem ...

Semi-automatic syringe filling machine for individual filling of syringes. Equipped for dosing of pasty medical products including: Visco Tec drum pump. PLC: ELAU PacDrive MC-4. Output: 400 syringes/h.

Fully automatic syringe inspection system for 1 ml long syringes with liquid contents. Number of camera stations in the carousel: 9 units. Output: up to 24,000 syringes/hour. The line is equipped with: Denester INOVA/ OPTIMA, type SH 250, Renester INOVA/ OPTIMA, type TR 240, labeller INOVA/ OPTIMA, type ESK 2411 and a wide range of accessories.

Syringe Dispenser Diluter HAMILTON MICROLAB 715-DIL 600 Series recent equipment that was used in demonstration only. ML635-BZ Unit With ML700 Advanced Controller Accuracy: ±1% Dimensions (WxDxH): 177.8 x 139.7 x 266.7 mm Power supply frequency: 50/60 Hz Max. voltage240 V No. of syringes ; 2 Weight 5.9 kg

GRONINGER FILLING MACHINE, MODEL DFVN 1000 (LF) Small filling and stoppering machine for disposable PFS and cartridges in nests. Usable for testing sizes and small batches, offers processes identical to those of a high-output system. Supports manual nest handling under laminar flow. Built in 2007. - Available with 1 ml format - Only 50 operating hours - Clear separation between the manual handling section and the fully automatic production section. - Filling system: Rotary piston pump, peristaltic pump, time pressure, or in combination - Dimensions: 1,500 ｘ 1,135 ｘ 2,000 mm PRODUCTIVITY - Max. Output: 4.800/hr - Filling volume: 0.5 - 50 ml - Supported package: 20/30/42/64/100/160 nest

The syrup room is designed to mix sugar with water to a given concentration of the resulting Brix of syrup, heat treatment of the syrup, in order to increase biological resistance. Capacity: until 10 t/h Operating mode: automatic Registration of mixing, pasteurization process parameters Automatic control of temperature, flow, pressure Touch control panels Memory configuration The choice of settings for different operating modes Syrup room consists of: sugar loading into the system unit mixing tank I hot water preparation unit for syrup with distribution panel I filtration unit buffer tank pasteurizer blending tanks with pumping station distribution panel II tank for mixing components cabinet for system control with touch control panel

General SKU300W571 No.18022 Year of construction1998 LocationBarneveld Main Features MaterialStainless steel Vacuumcheck Surface0.6 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface0,6 m² Number of plates4 Plate sizes508x305x40 mm Between the plates56 mm With cooling compressorcheck Cooling mediumFX 80 MaterialStainless steel 1.4404 (316L) Information MakeSociete Nouvelle Usifroid Syrius TypeMinilyo SMH 45 Mounted on wheelscheck With switchgearcheck Floorspace1,29x0,88 m Total height1,95 m Weight700 kg Extra SpecificationsProcess de-icing, hot gas, Nominal ice cap, 20 kg With laptop control Freeze dryersSociete Nouvelle UsifroidDryers > Freeze dryersBrand > Societe Nouvelle Usifroid What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide --  ...

Labeller for disposable syringes Manufacturer: Bausch & Ströbel Type SME 6005 This machine allows the insertion of labels (self-adhesive labels), as well as piston rods into disposable syringes. Capacity 6000 syringes/h Volume of syringes 0.5 to 10 ml Diameter of syringes 7 to 17 mm Label dispenser LAETUS Control Camera

INOVA/OPTIMA TR240 RENESTER Fully automatic system for loading syringes into trays. With separate control cabinet and integrated control system SIEMENS, type Simatic S7-300. Comes with various spare parts. Built in 2008. PRODUCTION - Output capacity: up to 22,500 syringes/hour - Tray capacity: 100 syringes/tray - Syringes capacity: 1 ml DIMENSIONS - Footprint: 200 x 240 x 200 cm - Weight: 1200 kg

INOVA/OPTIMA DENESTER, MODEL SH250 Fully automatic system for unloading syringes from corresponding trays, then to the machine outfeed and transferred to the next machine. With infeed and outfeed conveyor belts, a separate control cabinet and an integrated control system SIEMENS, type Simatic S7-300. With various spare parts. Built in 2008. PRODUCTION Output: up to 36,000 syringes/h Tray capacity: 100 syringes/tray Syringes capacity: 1 ml DIMENSIONS Size: 280 x 150 x 200 cm (ca) Weight: 1500 kg (ca)

OPTIMA SYRINGE, CARTRIDGE AND VIAL FILLING LINE, MODEL SV125 Year of construction: 2018 Machine for filling of various products (syringes, cartridges and vials). MACHINE CHARACTERISTICS Working Height: 1960 mm Control Cabinet: 900 mm ± 15 mm Switch Cabinet Weight: 1020 Kg PRODUCTION CHARACTERISTICS Max Output: 8000 Syringes/hour, 5000 Cartridge/hour Compatible products: Ez-fill Syringe 1 ml long; Ez-fill Cartridge 3 ml Stoppers: Plunger Stopper 1 ml long; 3 ml Plunger Cartridge Nest: Nest 100 Syringe and Cartridge Tub: Tub 3, Tub PP DIMENSIONS Size (W x L x H): 1645 x 5175 x 2450 mm Weight: 2040 Kg

Automatic Deep Draw Thermoformer High speed mechanical intermittent motion fully automatic packaging machine, balcony structure, independent servo-driven stations, stainless steel finish, PC-controlled. Designed to fit pharmaceutical-production environments, it thermoforms trays for vials, ampoules, syringes and similar products out of thermoformable films such as PVC, PET, Polystyrene (PS), PP, PLA, multilayer laminates etc. Its sturdiness, modular structure, simple operation and the easy, tool-less change over make it reliable, highly flexible, efficient and easy to service. Main features: Independently servo-driven machine stations. Machine cycle-speed is adjustable from the main HMI, under size dedicated recipes. Two web-index grippers grant the highest precision in pitch repeatability
Easy, tool-less change over: index change and size-related parameters automatically selecte ...

The machines and lines of the SFM series are designed for processing nested containers such disposable syringes. The dosing station is designed to process liquid products using rotary piston pumps. Depending on machine type and equipment, nests are supplied manually or fully automatically. Filling and closing are always fully automatic. The machines are also designed for vacuum-assisted dosing and insertion of plunger stoppers. This virtually eliminates entrapped air when filling disposable syringes with pharmaceutical product

The CONTIMOL is the continuous sugar dissolver to produce sugar syrup (simple syrup) with constant quality and concentration. The unit can be customized to individual needs regarding potential product output and based on usage and availability of energy. Module Features • High degree of automation • Jet-Mix-System • Short start-up phase • Existing CIP integration • Manufactured using high quality material The unit includes: -Mixing station on the frame; -Control cabinet; -Power cabinet; -Vertical bunker for sugar 5.000l. with scales; -A set of augers for feeding sugar into the dissolving unit;

Groninger production line for RTU nested syringes comprising MWU 010 semi-automatic opening system for outer bags of sterile tubs, MWF 100 fully automatic machine for the removal of cover foils and the fabric inserts of sterile tubs and DFVN 5000 filling & closing machine (CIP/SIP-system, filling system RKP with re-circulation suitable for suspensions, etc.), capacity up to 9,000 objects per hour Including format parts to handle the following syringes: 0.5ml / D=6.85mm 1ml long / D=8.15mm 1ml short / D=10.85mm 2.25ml / D=10.85mm 5ml / D=14.45mm 10ml / D=17.05mm 50ml / D=31.5mm

Overview  This complete Bag‑in‑Box filling line was manufactured by OETTEL Maschinen GmbH, CERMEX, and PRECIA MOLEN. The line is designed for filling water and syrup into Bag‑in‑Box formats. It was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The line is described as fully operational, is available immediately, and can be visited on request. Preventive maintenance was carried out twice per year; the last maintenance took place in January 2025. Palletizing, stretch wrapping, and pallet labelling equipment were upgraded in 2017 and 2023. Technical data Capacity: 5 L BIB: 650 BIB/hour / 7 pallets/hour 19 L BIB: 420 BIB/hour / 13 pallets/hour Formats: 5 L / 19 L Bag‑in‑Box Application: Water and syrup Configuration: Carton forming, Bag‑in‑Box filling, checkweighing, carton closing, conveying, palletizing, stretch wrappi ...

Overview  The gravity filling machine is a rotating machine that works automatically and is suitable for filling bottles, cans made of zinc sheet or jars. It is used to add liquids (such as brine, oil, vinegar, sauce, sugar water, etc.) into containers filled with solids. It is also used to fill empty bottles. The filler block can be viewed at any time.  Technical details  Number of filling places: 48  Pitch circle diameter: 1560 mm  Capacity (last):  250- 300 bottles/ min at 500ml fruit syrup. For used twist-off cap an additional capper would have to be organized  160 - 200 bottles/ min at 250ml maple syrup  Used plastic cap can be applied by installed AROL capper  Dimensions  Length: 3.000 mm Width: 2.500 mm Height: 2.500 mm Weight: 6.500 kg   Electr. characteristics Voltage: 400 V - 50 Hz  Auxiliary voltage: 24 V DC  Installed power: 20 kW  Scope of delivery  Filler |  ...

Matek Mix-Kult System for mixing ready-made syrup with water or mixing several components. The system is mounted on a base frame. The individual units are easily accessible and can be observed as they work. All necessary fittings, control and display devices as well as the control cabinet are installed. The mixing plant is fully automatic. Syrup and water are dosed in a predetermined ratio, mixed evenly, deaerated and impregnated. The finished beverage is stored in the beverage tank, from which it is then optionally piped to the filler via a pressure booster pump., Additional title: Inline mixing unit, Capacity: 80 hl/h, Operating pressure: 10 bar, Volume: 555 l, Power: 10 kW, Water: 2,5 atm, Compressed air: 5 atm, Length: 1900 mm, Width: 900 mm, Height: 2300 mm, Weight: 1000 kg, Material: Stainless steel, Base construction: Frame, Features: Mixing and dosing vessel; beverage tank; Mohno ...

Overview  This robot palletizer system was manufactured in 2017 by Italy BEMA. The system is designed for palletizing Bag-in-Box products (5L and 19L) for water and syrup applications. It consists of a robot palletizing system with Fanuc control, pallet magazine and stretch wrapper. The machine was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The system is fully operational, is available immediately, and can be visited on request. Maintenance was carried out twice per year. Technical data  Capacity: 5L BIB: 650 BIB/h – 7 pallets/hour 19L BIB: 420 BIB/h – 13 pallets/hour Formats: 5L / 19L Bag-in-Box Application: Palletizing of water and syrup products Configuration: Robot palletizer with Fanuc R-30iB system, pallet magazine, stretch wrapper Scope of Delivery  Robot palletizer | BEMA | FANUC R-30iB | 2017 | Palletizing robot sy ...

Repented range Purpose: Filtration of beer, water, syrup

Ready for SortimentZweck: filtration of beer, water, syrup

Automatic filling machine for closed and / or open ampoules with automatic loading and unloading. The machine automatically loads the ampoules 6 by 6, turns them upside down, opens them, turns them over and fills them with 6 syringes and seals them, unloading them on a tray. All these operations are carried out with a single operator. The machine also works for open blisters. Formats included for 1-2 ml The equipment comes with its laminar flow Technical data: Hourly production: 12,000 units. Maximum diameter of the vial: 19 +/- 19.5 mm Dosage: 1 +/- 10 ml. Feed to load: width max. 310 +/- 315mm - width min. 160mm - length max. 500mm Discharge: width max. 365mm - width min. of the individual basket 160mm - length max. 500mm Machine measurements: width 2300 x length 1940 x height 1600 mm Net Weight: 460KG Gross Weight: 780KG Installed potency: 220-380V 50Hz Absorption A. 220 ...

Operating temperature: 90 °C Material: stainless steel 316 L, mirror-polished (easy to clean) Operating pressure: 5 bar Code. No. 27512 12 Ser. No. 92013791A The filter is designed for the otimal filteration of solutions in pharmaceutical, biological, cosmetic, bioprocess, food and brewing industries. The samples of application: biopharmaceutical blood products atibiotics cough syrup intravenous solutions bioprocess solutions cosmetic, food and brewing products spiritus water food and beverages: water, wine and beer pharmaceutical : API water biotechnology: cell crop, plasma fractions, chemical solutions

Uhlmann UPS5ET blister machine for alu/alu blisters, including Uhlmann 149 buffer system. Maximum blister size 272 x 284mm (draw x width), maximum depth 40mm. SyPro feeding system for syringes etc with flexible robotic arm and vacuum grip head. Seidenader camera product presence checking system, VISIOtec VisoScan blister integrity tester, gas flushing with Dansensor MAP Check Combi for measuring the gas content within the pack. Domino D550+ laser printer with Seidenader print control camera. Output up to 400 blisters per minute. As new, with only 350 production hours.

CANDY RECYCLING AD 2000 made in 2015 for recycling of Rework from hard candy production suitable also for jelly, toffee, lollies, fondant even wrapped products result after recycling: completely transparent and neutral sugar-glucose syrup-water solution consisting of: dissolving machine intermediate/buffer tank, volume 2000 L with platform horizontal rotary drum vacuum filter unit year 2015 very good condition

Eurolux - Pressure Filler for PET - bottles 12 stations with dosing pump – Capacity: up to 650 bottles/h - NEW Technical data: - Capacity 0,5l; 1,0l; 1,5l : to 650 bottles/h – for PET bottles for syrup, water, drinks with / without gas - Installed power 0,37 kW - Weight: 240 kg - Measurement: H x W x D: 200 x 1150 x 1100 mm - With 12 stations - With dosing pump - Max. pressure tank: 4 Bar - Power supply: • Supply voltage 220/50Hz • Voltage control 24V 50Hz • Current Consumption 2A - Handling 1 Person - semiautomatic Operating Manual and Spare Parts List available. All prices are valid Ex-Works, excl. VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

Styrofoam shredder, shredder for polystyrene Styro-Cut 500 Technical specifications of the Styro-Cut 500 Dimensions (DxWxH): 920 x 1130 x 1640 mm Electric motor: 11 kW/2900 min – 1, 380 V Insertion opening: Ø 420 mm Weight: approx. 300 kg Throughput capacity: up to approx. 25 m3/h depending on sieve size and material Granule size: with standard sieve 9 mm. Production of granules up to 6 mm possible Styro-Cut 500 as an independent unit for manual shredding of the polystyrene Styro-Cut 500 can be used as part of a production line for crushing polystyrene. DS-50 is used as a coarse shredder, which is equipped with the help of a conveyor belt. The material is then conveyed to the Syro-Cut 500 shredder and finely shredded. Uses: – Companies that recycle the waste styrofoam – Construction industry that uses polystyrene as heat and sound insulation – Shops that  ...

The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...

Piston dosing filler for cold and hot products (e.g. syrup, jam, chutney,...) Filling volume 50-1000ml

Easimelt melting tank Stainless melting tank, ideal for many products such as chocolate, fondants, jams, jellies, syrups or heat liquids prior to production, 75L capacity, mobile, 3Ph

Syringe pump Altek Hydraulic motor OMR50 Spray pressure 1 -10 bar Storage pressure 4 6 bar 4 pick-up points with rubber buffer

Nova BioProfile Flex Automated Cell Culture Analyzer BioProfile is an automated cell culture analyzer that measures up to 15 important cell culture attributes. By combining up to five separate instruments into one easy-to-use instrument, BioProfile FLEX simplifies workflow and saves time, labor, and operating costs compared to multiple instruments. The FLEX automatic sampler takes samples from its two fermenters and transmits them to the measuring unit of the FLEX analyzer. The data obtained from the FLEX autosampler were compared with data taken manually from the reactor and their statistical analysis was performed. Specifications Sample analysis time: 2.5 minutes (gases only – PO 2 + PCO 2 ), 4.0 minutes (Chemistry/Gas and Osmolality), 6.25 minutes (all 15 tests), Operating temperature range: 15-30 °C (59-86 °F), Relative operating temperature Humidity range: 20-85 ...

Gerstel / CTC Mutlti Purpose Sampler MPS complete For the LC as well as GC YOC 2014, tray for 98 vials (2ml), gas-tight injection syringes

USED KRONES GLASS BOTTLE FILLING LINE Item #: Usm-185 Category PET Filling Lines We Sell Glass bottle Line KRONES monoblock 1-KRONES monoblock - vacuum filler 4000 LPH, capping machine Al cap MCA 28, exclusively for still drinks (juices, syrups, alcohol) -relatively few hours of operation, control unit replaced -accessible accessories for glass bottle 200ml, 700ml & 1000ml 2-KRONES Binetta labeling machine, one label (possible and neck), 0,2 – 1 l volume. -accessible accessories 3-RINSER for glass bottles 4-Some conveyor belts. 5-Sleeve Machine, Sleeve Machine with electric tunnel Condition: Very good condition. All caracteristics you can see on pictures

Premixer Falterbaum Typ: Famix 5000 Capacity: up to max. 5.000 l/h Year of manufacturing: 1973 2-component mixer with Bran + Lübbe pump (syrup and water) including vacuum pump

Filling machine for PFS and Cartridges in nest; for testing and small batches. Dimensions: 1,500ｘ 1,135ｘ 2,000 mm Max. Output: 4.800/hr Filling volume: 0.5 - 50 ml Supported package: 20/30/42/64/100/160 nest Filling system: Rotary piston pump, peristaltic pump, time pressure, or in combination. DFVN 1000 series is the smallest filling and stoppering machine by Groninger. Designed as a filling and closing machine for presterilized disposable syringes in nest for laboratories, test series and small batches. This semi-automated stoppering and filling machine offers processes identical to those of a high-output system. The machine supports manual nest handling under laminar flow. Clear separation between the manual handling section and the fully automatic production section.

SYNTEGON CARTRIDGE FILLING LINE Year of construction: 2023 Complete line, never installed. Composed of Washing Machine Type RRU 2053 C Before the cartridges can be safely filled and closed, they need to undergo a thorough external cleaning to remove product residues and other contaminants, preventing harmful substances from compromising operator and patient safety. The designed solutions allow to externally clean a wide variety of containers, with special emphasis on fast and easy operations. PRODUCTION CHARACTERISTICS Range containers: max. 10 ml Output/h: up to 21,600 Hot Air Laminar Flow Tunnel Type HQL 3320 This tunnel, highly flexible and cost-effective thanks to their modular set-up and high level of automation, uses dry heat to sterilize a wide range of containers safely and reliably, including pre-cleaned ampoules, cartridges, and syringes using ...

IMA BLISTERING MACHINE, MODEL C102 Year of construction: 2018 Machine for tray production with automatic product feeding, characterized by a balcony style structure which also allows a customization of the feeding area depending on the product to pack. the linear work flow of the material allows an easy forming material introduction each change-over despite its simplicity, it’s an ideal tray forming machine with attractive speed flexible for the packaging of syringes, ampoules, vials, small cosmetic products, solid forms etc. extremely simple to use for semi-skilled operators too PRODUCTION Cycle speed 15-40 cycles/minute Tray dimensions 30-138 mm (W) x 52-250 mm (L) x 3-25 mm (D) Vial blisters production 3 Blisters/Forming Step (Ampoules): 5 x 1ml 5 x 2ml 3 x ½ml 1 x ½ml

Specifications: Indicative thermal dissipation, doors closed: side 1 - 0.9 kW, side 2 - 0.9 kA, Maximum operating pressure: 3 bar g Approximate weight of empty autoclave 5000 kg Power supply 400 V 50 Hz, 19 kW Pressure (bar g) Flow rate size P1 water recovery from chiller 1,5 120 l/min 34.8x1.65 P1 water from chiller for exchanger 2 120 l/min 34.8x1.65 G water for empty pump 2 20 l/min 15.75x1.65 E1 industrial steam for gap 3 250 kg/h 22.1x1,65 E1 saturated steam ( 95-97%) 3,5 800 kg/h 47.5x1,65 D1 oiled compressed area for tools 5,5 100 NL/min 9.4x1.65 D oiled compressed area for chamber3,5 300 NL/min 34.8x1.65 A general discharge 72.9x165 FIELDS OF APPLICATION The FOA air-steam mixture sterilizer is suitable for: - Sterilization of parenteral solutions, liquids in closed non-deformable containers (e.g., glass tubes) and liquids in closed deformable containers (e.g., ...

Laser-Italy, complete automatic biscuit and biscuit roll line 250-300 kg/h for: Small layer cakes, capacity: 19700 pieces/h, dimensions: 32x70xh23 mm Large layer cakes, capacity: 8900 pieces/h, dimensions: 48x100xh23 mm Mini rolls, capacity: 10300 pieces/h, dimensions: ø35x80 mm Sponge rolls, capacity 1190 pieces/h, dimensions: ø60x250 mm with 1 flow-wrapping machine 250-350 ppm (Syntegon-Germany) Includes: - Pre-mixing container for dough or baking mass PML200 - Turbo mixer aeration unit TML500 - Water cooling unit complete with connecting pipes, biscuit roll extruder, EXTR1000 - Sponge cake decorating unit before baking DECO1000 - Cyclothermal tunnel kiln FCT 1.0 x 10 m - Cooling belt for sponge cake TRPS1000 - Sponge cake work bench BLPS1000 - Longitudinal cutting device for sponge cake GRTL1000 without tools - Cutting Tools for Sponge Cake Cutter GRTL1000 - Syru ...

Packo PHP 2 Pharmaceutical Process Pump The Packo EHEDG and 3A certified pharmaceutical process pumps of the PHP2 series are used for the most demanding sterile applications in the pharmaceutical, biotechnology and semiconductor industries. These perfectly cleanable pumps feature pump housings made of thick, cold-rolled 316L stainless steel, which are 100% non-porous and extremely smooth. The pumps feature fully machined open impellers made of material 1.4435, and thanks to their gap-free design and final electro-polishing, the pumps of the PHP2 series are perfectly cleanable, making them a reliable component in your production process. Applications These perfectly cleanable process pumps are the ideal solution for pure water circuits, cleaning applications, etc. Typical liquids are pure water, WFI, CIP, syrups, etc. Your benefits High pump efficiency leads to lower energy consu ...

COMPLETE TETRA PAK UHT PLANT WITH TWO ASEPTIC FILLING LINES FOR SALE Item #: Usm-211 Category Tetra Pak TBA 19 1 Tetra Therm Aseptic Drink/ Als Tetra Pak South East (Pvt) ltd Liter 20,000 2 Tetra Alex Homogeniser Tetra Pak South East (Pvt) ltd LPH 10,000 3 Jumbo Reel Truck 080 Tetra Pak South East (Pvt) ltd 4 Juice Processing Equipments Tetra Pak South East (Pvt) ltd LPH 8,000 5 Tetra Pak TBA/8 1000S Filling Tetra Pak South East (Pvt) ltd LPH 6,500 6 Cap Applicator - 30 Flex Tetra Pak South East (Pvt) ltd PPH 9,000 7 Conveyor Control Lubri/Systems Tetra Pak South East (Pvt) ltd 8 Tetra Straw Applicator 21 Tetra Pak South East (Pvt) ltd PPH 9,000 9 Conveyors Tetra Pak South East (Pvt) ltd 10 SS Pipes and Fittings Tetra Pak South East (Pvt) ltd 11 Tetra Pak TBA/19 Filling Machine Tetra Pak South East (Pvt) ltd LPH 1,500 12 Tetra Pak Strainer  ...

GRONINGER PFS DFVN1000 FILLING MACHINE Filling and stoppering machine for presterilized disposable syringes. Can be used for testing sizes and small batches of products. For laboratories, test series and small batches. Machine built in 2009. CHARACTERISTICS - 2 rotary piston pumps with 2 filling needles. Gassing during filling and stoppering - Filling via rotary piston pump, peristaltic pump, time pressure, or in combination PRODUCTION - Output: 4.800 syringes/hr (max) - Syringe diameter: 8,15 mm (with stoppers) - Dosing range: 0,2 ml – 1,5 ml ENERGY - Electricity: 220/380 V, 50 Hz, 3 Ph+N+PE - Power consumption: 7 KVA (approx) DIMENSIONS - Footprint: 1500 ｘ 1135 ｘ 2000 mm (ca)

For sale on behalf of a customer: Lithoz CeraFab 8500 with complete equipment for post-processing and a variety of spare parts:, - Cleaning Station Ultra 2019; S/N: C-019-109-803 1pcs., - Airbrush NEO for Iwata BCN Siphon Feed Dual Action 1 pcs., - Pressable glass Pressable glass during UHC/VAT assembly 2 pcs., - UCH top with 6 screws 2 pcs., - UHC bottom 2 pcs., - Cera VAT F 1 pcs., - Used Cera VAT F and S Better ones may still be used 14 pcs., - LithaFoil CF8500 Adhesion foil 120x70mm 09.14.000064 71 pcs., - Printing platform 1 pcs., - Nabertherm Furnace TR60 2019; S/N: 371133 1pcs., - Nabertherm Furnace LHCT 08/16 2019; S/N: 374533 1pcs., - Nabertherm Furnace LHCT 04/17 2019; S/N: 367248 1pcs., - Fridge Arctico. For slurry storage 1 piece., - Small Z tube Tube for slurry cartidge 5 pcs., - Big Z tube Tube for slurry cartidge 13 pcs., - Printer key 1 pcs., - Cleaning station key 1 piec ...

Contents: 1 x Epson printer not tested, medical syringes and plastic plate