synchronous used for sale

HIWIN HS22XD2YM2-1250-0550NNR-X 2-axis system X-Y X-axis: Profile width: 60mm Feed Constant: 155mm Timing Belt Axis Stroke/Overall Length: 1250mm/1775mm Slide: Type L, length 330mm Drive: prepared for gearbox g700-P44(Lenze) Wheelbase: 676mm-incl. Spacing Profiles Synchronous shaft: DM: 50mm - with couplings Y-axis: Profile width: 60mm Feed Constant: 155mm Timing Belt Axis Stroke/Overall Length: 550mm/976mm Slide: Type M, length 230mm Drive: prepared for gearbox g700-P44(Lenze) The gantry system is unused and has not yet been unpacked. Year of construction 07.2023

Gear motor, electric motor, electric gear motor, stainless steel motor, stainless steel gear motor, stainless steel bevel gear motor, permanent magnet synchronous motor -Manufacturer: Bauer, adjustable stainless steel geared motor -Type. SNFA5E09XA4-TF/VA-TM -Motor: speed 150-1500 rpm -Power: 1.1 kW -Hollow shaft: Ø 38 x 1750 mm -Protection rating: IP65 -Dimensions: 645/200/H220 mm -Weight: 53kg

SAFAN Lochem Holland rb.1996 type CNCL 80-2550 hydraulic press brake. CNC-controlled synchronous machine DNCS ARA-controlled axes-Y1; Y2; X; Crow - Wila Moducrown table deflection compensation controlled from CNC. In addition, a hydraulic die for felting-flattening sheet metal type DT005, controlled from CNC. Pressure 80 t x working length 2550 mm. Between the sides 2050 mm. Weight of the machine 6 t. Drives 11 kW. A set of tools of Amada/Trumpf system for the entire length of the machine, die V=12 mm /angle 28 degrees and punch 28 degrees/h=105 mm. This makes it possible to bend and flatten a sill 6 mm wide. Full DTR documentation. Health and safety manual in Polish. The machine meets the requirements of the EU Machinery Directive(CE).

In very good technical condition, the SAFAN Lochem Holland hydraulic press brake rb. 1990/2012, type DNCS 110-3100. Press rebuilt by the manufacturer in 2012. CNC-controlled synchronous machine DNCS ARA- controlled axes- Y1; Y2; R; Crow - Wila table deflection compensation controlled by CNC. In addition, a hydraulic matrix for sheet metal folding-flattening, type DT005, controlled by CNC. The machine is equipped with an automatic sheet support system during bending and flattening at 2 heights. Hydraulic punch clamping. 4 bumper fingers with precision. Pressure 110 t x working length 3100. Between the sides 2600 mm. Machine weight 8.3 t. Drives 7.5 kW. Protection of the working area with infrared. A set of Amada / Trumpf system tools for the entire length of the machine, die V = 8 mm / angle 28 degrees and punch 28 degrees / h = 105 mm. This enables the 6 mm long window sill to b ...

Hydraulic press brake from SAFAN Lochem Holland rb in very good technical condition. 1997/ CNC control new 2023, type CNCL 110-4300 TS1. CNC-controlled synchronous machine TS1-Windows 2023, color, bending simulation, touch screen, controlled axes - Y1; Y2; X; R. New control replaced in 2023. Additionally, a hydraulic die for folding and flattening sheet metal, type DT005, CNC-controlled. Hydraulic punch mounting. 4 bumper fingers with precision controls. Pressure 110 t x working length 4300. Stroke: 180 mm. Between sides 3700 mm. Machine weight 11.7 tons. Drives 7.5 kW. A set of Amada/Trumpf system tools for the entire length of the machine, matrix V = 8 mm / angle 28 degrees and punch 28 degrees / h = 105 mm. This allows you to bend and flatten a 6 mm long window sill. Full DTR documentation. Occupational health and safety user manual in Polish.

0: 4000 mm Working height: 2200 mm 0: 300 - 800 mm Dimensions (length / width): 4800 x 900 x 2500 mm Glazing and control press RU-VGPA 4 for glazing, sealing and final inspection. RU-VGPA4 glazing and control press Length 4800 mm, width 900 mm, height 2500 mm, System height 1900 mm, press beam height 2200 mm. System part covered with felt. Installation area as a roller conveyor, Lifting device from 300 to 800 mm. Two pneumatically foldable and movable press beam. Simultaneous, synchronous folding and moving the press beams over a single Foot valve, therefore requires the least amount of time Opening and closing the press. Safety control when building up pressure. (Technical description according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm Control: CNC, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .. crosscut saw .. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic len ...

Key data: 15 KW, 19 kVA, 230 V

19 KVA generator with 100% brushless copper alternator and digital control for operation as an emergency power generator. "CE" certified diesel engine from RICARDO ("KOFO" Premium Series) Type Stamford: "CE" certified quality synchronous alternator with 100% copper winding! Rated power: 15KW/19KVA 50Hz 220V/400V three phases including sockets Including ATS unit for emergency power operation Super-Silent type, Noise (LP1m) < 68 dB water-cooled, with 1500 rpm large tank for 8 hours of operation Size: 20008501150mm, Weight: 810kg optional: 2 years warranty / warranty that goes far beyond the usual (you can extend it if necessary). Our insurance partner: Allianz Suisse / Allianz Germany (for Europe) Switzerland- and Europe-wide service available. Diesel particulate filter available. Ricardo has been building marine diesel for almost 100 years and  ...

Key data: 30 KW, 38 kVA, 230 V

38 KVA generator with 100% brushless copper alternator and digital control for operation as an emergency power generator. "CE" certified diesel engine from RICARDO ("KOFO" Premium Series) Type Stamford: "CE" certified quality synchronous alternator with 100% copper winding! Rated power: 30KW/38KVA 50Hz 220V/400V three phases including sockets Including ATS unit for emergency power operation Super-Silent type, Noise (LP1m) < 68 dB water-cooled, with 1500 rpm large tank for 8 hours of operation Size: 22009001200mm, Weight: 890kg Optional: 2-year warranty/warranty that goes way beyond the usual (you can extend if needed). Our insurance partner: Allianz Suisse / Allianz Germany (for Europe) Switzerland- and Europe-wide service available. Diesel particulate filter available. Ricardo has been building marine diesel for almost 100 years and is a lead ...

Key data: 50 KW, 63 kVA, 230 V

63 KVA generator with 100% brushless copper alternator and digital control for operation as an emergency power generator. "CE" certified diesel engine from RICARDO ("KOFO" Premium Series) Type Stamford: "CE" certified quality synchronous alternator with 100% copper winding! Rated power: 50KW/63KVA 50Hz 220V/400V three phases including sockets Including ATS unit for emergency power operation Super-Silent type, Noise (LP1m) < 68 dB water-cooled, with 1500 rpm large tank for 8 hours of operation Size: 22809001250mm, Weight: 990kg Optional: 2-year warranty/warranty that goes way beyond the usual (you can extend if needed). Our insurance partner: Allianz Suisse / Allianz Germany (for Europe) Switzerland- and Europe-wide service available. Diesel particulate filter available. Ricardo has been building marine diesel for almost 100 years and is a lead ...

Key data: 80 KW, 100 kVA, 230 V

100 KVA generator with 100% brushless copper alternator and digital control for operation as an emergency power generator. "CE" certified diesel engine from RICARDO ("KOFO" Premium Series) Type Stamford: "CE" certified quality synchronous alternator with 100% copper winding! Rated power: 80KW/100KVA 50Hz 220V/400V three phases including sockets Including ATS unit for emergency power operation Super-Silent type, Noise (LP1m) < 68 dB water-cooled, with 1500 rpm large tank for 8 hours of operation Size: 260011001300mm, Weight: 1320kg Optional: 2-year warranty/warranty that goes way beyond the usual (you can extend if needed). Our insurance partner: Allianz Suisse / Allianz Germany (for Europe) Switzerland- and Europe-wide service available. Diesel particulate filter available. Ricardo has been building marine diesel for almost 100 years and is a  ...

Key data: 100 KW, 125 kVA, 230 V

125 KVA generator with 100% brushless copper alternator and digital control for operation as an emergency power generator. "CE" certified diesel engine from RICARDO ("KOFO" Premium Series) Type Stamford: "CE" certified quality synchronous alternator with 100% copper winding! Rated power: 100KW/125KVA Standby power: 110KW/138KVA Controller: SmartGen/HGM6120 50Hz 220V/400V three phases including sockets Super-Silent type, Noise (LP1m) < 68 dB water-cooled, with 1500 rpm large tank for 8 hours of operation Size: 260011001350mm, Weight: 1380kg Optional: 2-year warranty/warranty that goes way beyond the usual (you can extend if needed). Our insurance partner: Allianz Suisse / Allianz Germany (for Europe) Switzerland- and Europe-wide service available. Diesel particulate filter available. Ricardo has been building marine diesel for almost 100 yea ...

Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wartsila in end of year 2010 and it was commissioned in 2011 as a turn-key project with heat recovery system for 10 bar steam production. Fuel used in this plant was normal natural gas fed from a local pipeline. The plant was operated till 2021 having total operating hours 43’767 till shutting down. Complete plant with step up transformer, lube oil system, control panels, and synchronizer panel, USP systems, operating monitors, MCC, start system and air compressors, HRCS for 10 bar steam, exhaust system, 6 kV Vacuum breaker with synchronisation, manuals and drawings. Plant is still installed, and electric power is still connected to all devices. Wartsila Service has made all scheduled services for this engine, last 40’000-hour service just 3000-hour prior operation closing in 2021.  ...

Key data: 2 U/min, 25

Stock - No. 1665 1 Gebr. ERMAFA compounding line type E 90.2 - throughput up to 450 kg/h depending on material Built in 1987 consisting of: Extruder Twin Screw Ø 2 x 90 mm - 25 L/D Synchronous Segment screws and barrels, water-cooled Drive 75 kW DC , 1450 rpm. 2 x degassing zones, 1x vacuum pump Hydraulic screen changer screen - Ø 150 mm >> WITHOUT control / control cabinet, electrical diagrams for new control are provided by us ! SPECIAL PRICE Further extruders and compounding lines from the Wuppertal warehouse - ready for demonstration.

Base Machine is a OMSO DM44N 2-Lane Lid Machine, age 2004, L- Format in feed conveyor for feeding Vertical Lid Stacks, acts as an accumulator as well Auto feeding of Lid Stacks to the 2 x Universal Screw Denesters with suction Nipples Infeed conveyor with Vacuum to keep Lids in proper position Each Lane with PAGOmat 6HS Pressure Sensitive Label dispensers, with PLC Controls, manufactured by PAGOmat/ Fuji Seal, Switzerland Outfeed Conveyor to 2-Lane Lid Stacker 2-Lane Stacker, each Lane with 2 x Universal Helical Screws Main Drive with a variable frequency, AC-Synchronous Motor with a brake, with Microprocessor Controls Max. dia. of round Lids: Ø125 mm Max. dimensions of Rectangular & Oval Lids: 125 x 150 mm Max. height of Lids: 25 mm Speed with Oval Lids dimensions 120 x 130 mm: Single Lane 110 Lids/ min, Dual Lane 220 Lids/ min 400 V, 3 phase, 50 Hz

Key data: 750 KW, 780 kVA, 400 V

MWM Emergency Power Generator TBD602-V16 Diesel emergency generator from 1980, operating hours are unknown, complete with controls, muffler, radiator, expansion tank and day tank. 1 available from 04/24 624 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: AVK DIDB 120/1109/40, 780 KVA Manufacturer: MWM Model No.: TBD602-V16 Type: Diesel Generator Set Serial number: 80 79 53 Power [KW]: 750 Year of construction: 1980 Hours: unknown AC Generator AVK DIDB 120/1109/40 Manufacturer: AVK Model No.: DIDB 120/1109/40 Type: AC Synchronous Generator Serial Number: 807953 Power [KVA]: 780 Voltage [V]: 10,000 / 5,770 Frequency [Hz]: 50 Electricity [A]: 51 Speed [1/min]: 1,500 Year of construction: 1980

Key data: 304 KW, 300 kVA, 400 V

Henschel Emergency Power Generator 12V14164 Diesel emergency generator from 1962 with 769 operating hours, Motor and AC generator on base frame. 1 available 240 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Kaiser DGT 124/4, 300 KVA Manufacturer: Henschel Model No.: 12V14164 Type: Diesel Generator Set Serial Number: 190181 Power [KW]: 304 Year of construction: 1962 Hours: 769 Weight of aggregate [kg]: – Dimensions unit LxWxH [cm]: – AC-Generator Kaiser DGT 124/4 Manufacturer: Kaiser Model: DGT 124/4 Type: AC Synchronous Generator Serial Number: 15620 Power [KVA]: 300 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 435 Speed [1/min]: 1,500 Year of construction: 1962 Weight [kg]: 1.600

Description: KAESER ASD 37 SFC with Inverter Drive  , rated power: 22 kW air flow: 3700 l/m working hours: approx. 20000 hrs, 18000 hrs. under load time left to regular maintenance: approx. 3000 hrs. max.working pressure: 8.5 bar equipped with 1 RFID user card! regulary maintained service manual: unavailable  , ASD – Multiple savings zhe newly improved ASD systems save energy in a number of ways: equipped with further-refined SIGMA PRO FILE rotors, the airends are controlled and monitored by the industrial PC-based SIGMA CONTROL 2 compressor controller. This advanced controller matches compressed air delivery to actual air demand and keeps costly idling time to an absolute minimum, thanks to its dynamic control mode save energy with the SIGMA PROFILE at the heart of every ASD system lies a premium-quality airend featuring Kaeser’s SIGMA PROFILE rotors flow ...

Key data: 790 KW, 738 kVA, 400 V

Deutz / MWM Gas CHP (Container) TBG 620 V12 Landfill gas generator from 1999 with 150,200 operating hours, E40 12/22, complete (container) with cooling. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2-CG, 1,100 KVA Gas engine Deutz / MWM TBG 620 V12 Manufacturer: Deutz / MWM Model: TBG 620 V12 Type: Gas Engine (Landfill Gas) Serial Number: 2200633 Power [KW]: 790 Year of construction: 1999 Hours: 150,200, E40 12/22 Weight motor and generator [kg]: 7.800 Dimensions LxWxH [cm]: – AC Generator Stamford HC I634K2-CG Manufacturer: Stamford Model No.: HC I634K2-CG Type: AC Synchronous Generator Serial number: 0103530/01 Power [KVA]: 1,100 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1602 Speed [1/min]: 1,500 Year of construction: 1999 Weight [kg]: 2.513

Generator from 1996 with 1,360 operating hours, 1 available. 400 volts/50 Hz. Manufacturer: MarelliMotori Model: M7B 315 L D 4 Type: AC Synchronous Generator Serial Number: MB5883 Power [KVA]: 575 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 830 Speed [1/min]: 1,500 Year of construction: 1996 Weight [kg]: 1.348

Key data: 2000 KW, 2500 kVA, 10000 V

Deutz / MWM Gas CHP (Container) TBG 620 FV 20 Gas-fired power generator (mine gas) from 2003 with 95,000 operating hours, 22,000 operating hours after major maintenance, complete (container) with cooling. 1 available, 1,938 KWel x 1,500 rpm, 10,000 V/50 Hz (transformer 400 V optional). AC generator: AVK DIG 130 l/4, 2,500 KVA Manufacturer: Deutz / MWM Model: TBG 620 FV 20 Type: Gas Engine (Mine Gas) Serial Number: 2204013 Power [KW]: 2,000 Year of construction: 2003 Operating hours: 95,000 / 22,000 after major maintenance Weight motor and generator [kg]: 18.500 Dimensions LxWxH [cm]: – AC generator AVK DIG 130 l/4 Manufacturer: AVK Model: DIG 130 l/4 Type: AC Synchronous Generator Serial Number: 84 25722 A101 Capacity [KVA]: 2,500 Voltage [V]: 10,000 Frequency [Hz]: 50 Electricity [A]: 44 Speed [1/min]: 1,500 Year of construction: 2003 Weight [kg]: 7.100

This 2-Axis lathe, manufactured in 1996, offers precision and versatility. With a turning diameter of 42mm and max. turning length of 280mm, it boasts a Siemens C200-4D control system. Equipped with 2 turrets and a bar loading magazine LM 3200, it facilitates efficient production. Notable features include backside machining in 3 positions and a synchronous spindle on turret 1. Thread milling and polygon turning capability enhance its functionality. For those seeking reliability and performance, consider this INDEX ABC 42 lathe. Contact us for further details.

Number of spindles: 3 St. Number of tools: 2/3 St. Spindle diameter: 40/50 mm 1 OKOMA folding machine model UF 2 EG ------------------------------------- 1. Energy data: - Operating voltage: 3 phases, 380 V, 50 Hz. - Compressed air: Air requirement: 13 NL/min. Operating pressure: 8 bar up. Air: according to Pneurop 6611 2. Profile spindle 1: - Spindle arrangement: right - Power 11 kW - Speed 7000 rpm - Direction of rotation: synchronous and counter rotation - Spindle diameter 40 mm - Usable length 252 mm - Tool diameter max. 230 mm - U-movement of the profile spindle - Positioning vertically Drive: pneumatic cylinder 120 mm cycle for 2 tool positions Position sensor: limit switch - Positioning horizontally Drive: Pneumatic cylinder forward-back Position sensor: limit switch - Automatic immersion: immersion speed can be regulated for tear-free Fold over - Pro ...

Key data: 410 mm, 200 mm, 4 kW

Used, Year of Construction 2008 Operating time according to hour meter 135 h (0.02 h/day) Offer Felder AD 741 with special accessories from part-time joinery in best condition for sale. This version is one of the last series with the particularly robust 4-spindle height adjustment, which was later converted to a central spindle for cost reasons. In order to prevent possible misunderstandings, an on-site visit is possible by appointment. Delivery is to be ordered by the buyer. Motor power 4 kW direct start with brake and limit switch Planer width 410 mm Total dressing table length 2000 mm Table length feeding dressing table 980 mm Chip removal max. 4 mm - is set and displayed on the right dressing table Swivel dressing fence with anodized ruler 4-Blade Felder System Planer Shaft Thickness planer width 404 mm with automatic E-thickness height adjustment Powerdrive (min. - ma ...

Description: Control type: conventional, technical details: tool holder MK4, tool diameter max. Ø 145 mm, table size L: 800 x W: 700 mm, clamping surface Ø 300 mm, table travel 200 mm, division max. 5 module, total power requirement 7.5 kW, machine weight approx. 4.9 t, space requirement approx. 2.8 x 1.5 x 2.3 m, additional information: Application: Gear hobbing machine for gearing straight and helical spur gears, worm gears as well as rollable profiles, cycle milling and individual milling as well as counter and synchronous milling , Information on the machining of spur and worm gears: -Outside Ø max. 250mm with counterholder -Division max. 5mm (module), -Tooth bevel max. 45°, -Tooth width max. Axial milling 200mm and radial-axial milling 240mm, -Milling width max. clamping table counterholder 655mm, milling slide: -swivel 210°, -travel path 350mm, -feed, 2 directions, 16 steps in ...

Key data: 366 KW, 465 kVA, 400 V

MTU Gas Generator 12V400 GS gas-fired generator from 2016 with 46,137 operating hours, complete with control but without cooling. 1 available 352 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Leroy Somer LSAC 47.2M7 C 6/4, 465 KVA MTU E3042LH9 gas engine Manufacturer: MTU Model: E3042LH9 Type: Gas Engine Serial number: 0925-04-16 Power [KW]: 366 Year of construction: 2016 Hours: 46,137 Weight of aggregate [kg]: 1.720 Dimensions LxWxH [cm]: – AC Generator Leroy Somer LSAC 47.2M7 C 6/4 Manufacturer: Leroy Somer Model: LSAC 47.2M7 C 6/4 Type: AC Synchronous Generator Serial Number: 333779/2 Power [KVA]: 465 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 671 Speed [1/min]: 1,500 Year of construction: 2016 Weight [kg]: 1.253

Description: -max machining diameter 42 mm -max machining length 120mm -max main spindle speed 8000rpm -max counter spindle speed 6000rpm -Weight 3300Kg -Two 12-fold tool turrets with intermediate indexing and driven tools - Recording VDI 20 - Control Mitsubishi Meldas 635 LCC -full counter spindle with X and Z axis -C axis spindle 1 -C-axis spindle 2 - Mechanical spindle indexing 15° spindle 2 -Collet chuck holders spindle 1 and 2 -Workpiece removal device -Milling interpolation -Constant cutting speed spindle 1 and 2 -Cutting radius compensation -insert chamfer radii -Thread cutting spindle 1 and 2 -Synchronous tapping without pull-out holder -Bar feeder Iemca Boss 545 -Weight bar loader 850Kg -chip conveyor -High pressure cooling -Kraft&,Bauer fire extinguishing system Machine was operated with oil Drehlänge: 120 mm, serial number: 88,025, Read off operating hours: 60,787 h, cont ...

Description: -max machining diameter 42 mm -max machining length 120mm -max main spindle speed 8000rpm -max counter spindle speed 6000rpm -Weight 3300Kg -Two 12-fold tool turrets with intermediate indexing and driven tools - Recording VDI 20 - Control Mitsubishi Meldas 635 LCC -full counter spindle with X and Z axis -C axis spindle 1 -C-axis spindle 2 - Mechanical spindle indexing 15° spindle 2 -Collet chuck holders spindle 1 and 2 -Workpiece removal device -Milling interpolation -Constant cutting speed spindle 1 and 2 -Cutting radius compensation -insert chamfer radii -Thread cutting spindle 1 and 2 -Synchronous tapping without pull-out holder -Bar feeder Iemca Boss 545 -Weight bar loader 850Kg -chip conveyor -High pressure cooling -Kraft&,Bauer fire extinguishing system Machine was operated with oil Drehlänge: 120 mm, serial number: 88,034, Read off operating hours: 50,763 h, cont ...

turning diameter:300 mm total power requirement:2 x 160 kW weight of the machine ca.:2 x 18 t swing dia.:350 mm stroke of vertical slide:250 mm stroke of the horizontal slide:280 mm spindle diameter in front bearing:140 mm spindle turning speed range:80-1120-2800 U/min Available from 01.08.2024 Flexible rotating cells DV-32-2 In day frame construction consisting of: 2 CNC vertical lathes each with: 1 main spindle and 1 cross slide with CNC Sinumerik 3T suitable for synchronous or asynchronous machining processes With integrated loading and measuring automation

:FB-160 spindle diameter:160 mm x-travel:4000/6000/8000/10000/12000/14000/16000 mm y-travel:2000/2500/3000/3500/4000 mm z-axis:1200 mm w-axis:700 mm spindle cone:50 SK/BT spindle speed max.:3000 U/min spindle drive:37/51 kW feeds:X/Y/Z/W: 10 / 10 / 10 / 8 / 5 m/min rapid speed:X/Y/Z/W: 20 / 20 / 20 / 10 / 5 m/min max. torque on the spindle:3.300 Nm cross section of ram:460x520 mm table load:30 t table-size:2500x2500 mm table travel:1500 mm weight of the machine ca.:FBM-160 mit X=4m: 80 t positioning accuracy:0.032/1000 mm repeating accuracy:0.018/1000 mm CNC controller:Siemens/Fanuc/Heidenhain CNC controls from:Siemens/Fanuc/Heidenhain Factory-new CNC controlled panel drilling machine with CNC control from Siemens / Fanuc / Heidenhain. All essential components from well-known manufacturers such as Siemens, SKF, FAG, Heidenhain, Igus and many more. Newly developed FB series Convenient fo ...

Throughfeed case clamp Make: ERREGI Type: Tecnopress VR2/2 New machine Fast - Silent - Clean - Lean - Universal - Service by Wehrmann Technical data:  Self-positioning thru-feed carcase press The load bearing structure of the machine consists of a double portal in welded tubular steel, inside of which the two mobile heads and the presser table run. -The presser table and the mobile head are driven by motors. - Each of the mobile head and fixed is fitted with three horizontal pressure beams with programmable positioning moved vertically by an electro mechanical system. - The belt system is positioned on either side of the machine to allow the carcase to be clamped equally well, whether is his depth. -The carcase transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loop belt r ...

CONTROLS   PC controller FEINTOOL FMC (BECKHOFF) PRESS DESIGN   drive system: servomechanic   feedstock transport direction: left to right SLIDE   total force (nominal): 250 to   stroke: 70 mm   stroke rate (max.): 140 /min COUNTER RAM   nominal force: 625 to   stroke: 25 mm V-RING   nominal force: 1250 to   stroke: 25 mm TOOL DIMENSIONS   lower table (left-right): 600 mm   lower table (front-back): 600 mm   upper table (left-right): 600 mm   upper table (front-back): 600 mm   shut height max.: 380 mm   ram adjustment: 125 mm STRIP-FEEDER   sheet width max.: 250 mm   sheet thickness max.: 10 mm   feeding step min.: 0.1 mm   feeding step max.: 300 mm   sheet length min: 2500 mm CR ...

There are two Boley BE42 available, max. machining diameter: 42mm, max machining length: 120mm, max speed main/ counter spindle 8000/ 6000/min, control: Mitsubishi Meldas 635 LCC, weight: 3,3t, operating hours machine 1/ 2: 60.787/42. 200h, including bar feeder, two 12-fold tool turrets with intermediate indexing and driven tools, holder VDI 20, full counter spindle with X- and Z-axis, C-axis spindle 1, C-axis spindle 2, mechanical spindle indexing 15° spindle 2, collet holders spindle 1 and 2, workpiece removal device, milling interpolation, constant cutting speed, synchronous tapping without extractor holder, bar loader Iemca Boss 545, chip conveyor, high-pressure cooling, fire extinguishing system, further collets, tool holders and accessories are available, inspection is possible.

Demo machine from demonstration pool Enormously versatile cable slot machine thanks to individually adjustable, standing cutting knives. Cables are cut as standard by two knives penetrating the insulation on the side. The series was significantly improved in terms of safety in 2014 and now features a short feeder for thin cables and a long feeder for thick cables. The change is made in seconds by means of a rotary mechanism. The simplicity in the construction and the construction with two powerful, synchronously running rollers is left. With coarse gearing, even thicker cables are safely fed into the knives and transported further after the cutting process for removal. Blunt knives can be easily and cost-effectively sharpened with a standard grinding machine.

WEINIG / GreCon Short Wood Finger-jointing Line Ultra TT Data of the system: • Wood inlet length (min. - max.) 150 - 1000 mm (1300 mm) • Reference timber inlet length at the finger-jointing line 400 mm • The length of the wood to be processed must be at least 25 percent longer than the width of the wood to be processed • Wood thickness (min. - max.) 20 - 80 mm • Reference wood thickness 28 mm • Wood width (min. - max.) 40 - 205 mm • Reference wood width 90 mm • Reference wood cross-section 28 mm x 90 mm • Wood outlet length (min. - max.) 3000 - 6100 mm • Reference wood outlet length 6100 mm • Tine profile (length) 10 – 11 mm • Max. wood cross-section for processing softwoods (with specified tine length) 100 cm² • Max. wood cross-section for processing hardwoods (with specified tine length) 80 cm² • Glue type PVAC • Species: Softwood / ...

CharacteristicsSwing- Ø, max.450 mmWeight approx.10000 KgDrive power milling spindle9,5/5,5 kWDrive power main spindle15/11 kWDrive power second spindle15/11 kWNumber of Toolmagazine positions38 Speed max.12000 rpmSlewability of B-Axis+/-120 degreeMovements X / Z / Y455/800/+-105 mmMilling spindle upper side1 Input precision of C-axis on Counterspindle0,001 degreeSpindle speed 2nd Spindle max.6000 rpmInput precision of C-axis on Mainspindle0,001 degreeBar diametre52 mmSpeed max.6000 rpmMax. Turning Length800 mmMax machining diameter430 mmDimensions (L x W x H)4,17 x 2,5 x 2,5 (4,55 x 2,5 x 2,5) mGeneralTurning-milling centre SZM: Tool spindle, Spindle 1, Spindle 2 and Turret 2 (Milling); Control: CELOS - ERGOline Spindle 1 hobbing functionSpindle 1 hobbing function Gear machining or spline machining is possible by synchronizing the rotary tool spindle rotation on turret 1 with the spind ...

weight max.: 5000 kg table turning speeds: 6 - 60 m/h roll diameter: 250 x 120 mm workpiece diameter: 250 - 2.800 mm weight: 300 kg range L-W-H: 0 mm Antrieb range L-W-H: 0 mm Mitläufer total power requirement: 0,75 kW Stable turning The HGK_Series has two synchronously working drive units that are used for ensure continuous rotation with stepless speed control. Of the Roller spacing can be increased and decreased manually using locking pins to achieve a large diameter range of the workpieces. Characteristics: - For rotating and positioning - in the field of machine, container, plant and pipeline construction - Two synchronously running drive motors - Adjustable rotation speed. - PU castors - Adjustment is via bolts - Remote control Scope of delivery: - 1x controller - 1x driven unit - 1x traveling unit The data for this ad was created with ModulMWS - the software solution of LogoTech ...

The BX series machine is a high-speed intermittent operation vertical filling sealing machine. Its maximum speed is 100 bags per minute. Servo driven end seal jaws operating and transporting the film PLC controller with touch screen interface for easy operation Hot printer and film feeding system work together synchronously One-piece bag former, quick change, no tools needed Exact warning function for product taken Photo sensor for automatic tracking of eye marks Stainless steel for excellent durability and hygiene

Key data: 650 mm, 600 mm, 500 mm

Manufacturer : Hermle Model: C 30 U Number of machines : 2 Control : Heidenhain i TNC 530 Year of construction : 2008 / 2009 Switch-on hours : approx. 115000 h Spindle running time : 24400 h Location : Germany until week 49 / 2023 then from warehouse Sweden Specifications Max. spindle speed: 28000 rpm Spindle mount : HSK A 63 Number of synchronously controlled axes : 5 Travel X-axis : 650 mm Y-axis : 600 mm Z-axis: 500 mm A-axis : +/- 115 º MM B-axis : 360° NC serving table diam. 280 mm Tool Locations Pick Up: 32 Positions Additional magazine: 157 lots Total tool slots : 189 lots Loading and unloading area: 8 lots Tool length max.: 300 mm Tool diameter max. 125 mm Tool weight max.: 8 kg Dimensions Length : 3154 MM Width : 2354 MM Height 2892 MM Machine weight : 10500 KG Other equipment features - max. coolant pressure 80 bar possible ( IKZ  ...

Metal laser cutting machine for sale. Inspection of the city of Krasnoyarsk. The set includes 2 replaceable portal-type hydraulic tables. Operating range Laser processing area, mm: 3000x1500; Maximum distributed load on the table, kg: 1000; Machine accuracy parameters (with feedback sensors) Positioning accuracy along the X, Y, Z axes mm/m: ±0.05; Positioning repeatability along the X, Y, Z axes, mm/m: ±0.005; Movements and feeds Working displacement along the X axis, mm: 3000; Working displacement along the Y axis, mm: 1500; Working movement along the Z axis, mm: 100; Speed of rapid movements along the X, Y axes, m/min (synchronously): 150; Speed of fast movements along the Z axis, m/min: 50; Working acceleration: up to 2g; Linear axes X-axis: linear drive; Y axis: linear actuator; Z axis: servo drive, precision rack and pinion with mechanical backlash compensation; ...

Robust, high-quality welding rotator with a load capacity of 10 tons. Diameter range: 100-4000 mm. A sustainable turning device that is ideal for welding pipes and steel tanks. Easy adjustment of the roller spacing. Includes wired remote control and foot pedal. With the built-in master-slave function, you can control several driven units synchronously. CE conformity, 1 year warranty. The price does not include VAT and transport. Depending on your wishes, we can organize the transport.

Robust, high-quality welding rotator with a load capacity of 5 tons. Diameter range: 100-3500 mm. A sustainable turning device that is ideal for welding pipes and steel tanks. Easy adjustment of the roller spacing. Includes wired remote control and foot pedal. With the built-in master-slave function, you can control several driven units synchronously. CE conformity, 1 year warranty. The price does not include VAT and transport. Depending on your wishes, we can organize the transport.

Robust, high-quality device. Can be mounted on a welding table. Adjusting the roller spacing is very easy. The foot pedal is included in the price. With the built-in master-slave function, you can control multiple driven units synchronously. This makes it easy to solve a later capacity expansion. The price does not include VAT and transport. CE conformity, 1 year warranty. Depending on your wishes, we can organize the transport.

Key data: 650 mm, 600 mm, 500 mm

Manufacturer : Hermle Model: C 30 U Number of machines : 1 Control : Heidenhain i TNC 530 Year of construction : 2008 / 2009 Switch-on hours : approx. 95000 h Spindle running time : 28000 h Location : Germany from stock Hultfred - Sweden Specifications Max. spindle speed: 28000 rpm Spindle mount : HSK A 63 Number of synchronously controlled axes : 5 Travel X-axis : 650 mm Y-axis : 600 mm Z-axis: 500 mm A-axis : +/- 115 º MM B-axis : 360° NC serving table diam. 280 mm Tool Locations Pick Up: 32 Positions Additional magazine: 157 lots Total tool slots : 189 lots Loading and unloading area: 8 lots Tool length max.: 300 mm Tool diameter max. 125 mm Tool weight max.: 8 kg Dimensions Length : 3154 MM Width : 2354 MM Height 2892 MM Machine weight : 10500 KG Other equipment features - max. coolant pressure 80 bar possible ( IKZ ) - Touch probe  ...

Key data: 650 mm, 600 mm, 500 mm

Manufacturer : Hermle Model: C 30 U Number of machines : 2 Control : Heidenhain i TNC 530 Year of construction : 2008 / 2009 Switch-on hours : approx. 115000 h Spindle running time : 24400 h Location : Germany Dismantling in week 5 / 2024 then from warehouse Sweden Specifications Max. spindle speed: 28000 rpm Spindle mount : HSK A 63 Number of synchronously controlled axes : 5 Travel X-axis : 650 mm Y-axis : 600 mm Z-axis: 500 mm A-axis : +/- 115 º MM B-axis : 360° NC serving table diam. 280 mm Tool Locations Pick Up: 32 Positions Additional magazine: 157 lots Total tool slots : 189 lots Loading and unloading area: 8 lots Tool length max.: 300 mm Tool diameter max. 125 mm Tool weight max.: 8 kg Dimensions Length : 3154 MM Width : 2354 MM Height 2892 MM Machine weight : 10500 KG Other equipment features - max. coolant pressure 80 bar poss ...

engine output: 5 kW saw-blade dia.: 300-350 mm Working speed: 0-40 m/min weight: ca. 1550 kg kg Concept 350 PLUS Partnership Edition pressure beam saw Cutting length: 3.200 mm ------------------------------------------------ combines the advantages of different sawing systems. Flexible as one Panel saw, precise and safe like a pressure beam saw and ergonomic like a rip saw ------------------------------------------------ Manufacturer description: - Saw unit can be swiveled up to 46° - Pressure bar, including LED lighting with 3 different action colors: WHITE: Machines in rest position RED: Pressure bar lowers or emergency stop function BLUE: Sawing unit moves - variably usable support table 1,000 x 500 mm - Scoring system using the main saw blade in synchronization - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel, including ...