synchronous used for sale

Key data: 1400 KW, 1800 kVA, 400 V

Gas generator set from 2004, Scope of delivery: Base frame and generator (defective), as shown with missing parts. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2205035 Power [KW]: 1.400 Year of construction: 2004 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 00366141 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2004 Weight [kg]: 3.700

Time relay, synchronous motor actuated, switch-off delayed ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RZwa PL - No.: 734125000 ( PL No.:734125000 ) 1 - 12 sec TGL 200-3659/1 unused ! Dimensions: 145 x 140 x 90 mm

Key data: 1400 KW, 1800 kVA, 400 V

Gas generator set from 2004, Scope of delivery: Base frame and generator, as shown with missing parts – bushings defective. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2205063 Power [KW]: 1.400 Year of construction: 2004 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 0166189/02 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2004 Weight [kg]: 3.700

Time relay, synchronous motor actuated, switch-on delayed ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RZw PL - No.: 734176000 ( PL No.:734176000 ) 1 - 12 sec TGL 200-3659/1 unused ! Dimensions: 145 x 140 x 90 mm

Winding drive, rewind drive D75mm and D150mm, Spanntec, new -40% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: Winding drive, rewind drive D75mm and D150mm consisting of: 1) SIMOTICS S synchronous motor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, 2) Hypoid gear, I=175, TPK+050S-MF3-175-0E1-1S11, Wittenstein, 3) Winding spigot for reel support, series 3233, D75mm, Spanntec, 4) Attachment adapter for reel support, series 5230, D150mm, Spanntec, 5) Attention: Optionally, we also have the matching motor module SINAMICS S120 6) You are wel ...

Time relay, synchronous motor actuated, switch-on delayed ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RZw PL - No.: 734178000 ( PL No.:734178000 ) 0,25 - 6 h TGL 200-3659/1 unused ! Dimensions: 145 x 130 x 90 mm

Complete winding drive, rewind drive, D350mm - D650mm, IBD, mint condition -60% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: Complete winding drive, rewind drive D350mm to D650mm consists of: 1) Total 120 x 86 x 120cm high, 350kg 2) Heavy frame with bearing and shaft, IBD 3) Manually adjustable drum support D350 to D650mm x 430mm long 4) SIMOTICS S synchronous motor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, 5) Hypoid gear, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, 6) Metal bellows coupling BC2-00300AA032-000-032.000 Wittenstein ...

Gear motor, 1-phase AC synchronous motor with gearbox SAIA UDS1 UDS1NE1K83ANNN 0,5 W 6 rpm (counted) 220 - 240 V AC 50 Hz Shaft: Ø 4 mm approx. 130 mm connection cable New ! Dimensions: 65 x 55 x 50 mm

Key data: 1400 KW, 1800 kVA, 400 V

MWM Power Generator TBG620-V16K Gas generator set from 2004, Scope of delivery: as shown, generator defective with base frame. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2205165 Power [KW]: 1.400 Year of construction: 2004 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 0132701/03 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2004 Weight [kg]: 3.700

SEnergie CHP G 4.12 TI Electricity and heat generators from 2009 with 64,692 operating hours, complete, closed unit in good condition 1 available 50 KWel x 1,500 rpm, 400 V/50 Hz AC synchronous generator Leroy Somer LSA 43.2L8 C 6/4 with 63 KVA

Key data: 1400 KW, 1800 kVA, 400 V

Gas generator set from 2005, Scope of delivery: Base frame and generator, as shown with missing parts. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2205551 Power [KW]: 1.400 Year of construction: 2005 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 00145797 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2005 Weight [kg]: 3.700

Leroy Somer AC generator AA 56 BVL8A-4P for sale Generator from 1998 in tested condition. 1 available 6,300 V/50 Hz. Manafacture: Leroy Somer Model: AA 56 BVL8A-4P Type: AC Synchronous Generator Serial Number: 165345-1 Power [KVA]: 6,250 Voltage [V]: 6.300 Frequency [Hz]: 50 Current [A]: 573 Speed [1/min]: 1,500 Year of construction: 1998 Weight [kg]: 13.100 Dimensions LxWxH [cm]: 310 x 170 x 197

Leroy Somer AC generator AA 56 BVL8A-4P for sale Generator from 1998 in tested condition. 1 available 6,300 V/50 Hz. Manafacture: Leroy Somer Model: AA 56 BVL8A-4P Type: AC Synchronous Generator Serial Number: 165345-1 Power [KVA]: 6,250 Voltage [V]: 6.300 Frequency [Hz]: 50 Current [A]: 573 Speed [1/min]: 1,500 Year of construction: 1998 Weight [kg]: 13.100 Dimensions LxWxH [cm]: 310 x 170 x 197

Key data: 3240 KW, 3294 kVA, 10500 V

Electricity and heat generators from 1997 with 54,430 operating hours, complete with control and heat exchangers. 1 available 2,635 kWel x 1,000 rpm, 10,500 V/ 50 Hz. AC generator: ABB AMG 630 L6, 3,294 kVA CHP Wärtsilä W16V25SG Manafacture: Wärtsilä Model: W16V25SG Type: Gas-fired CHP Serial Number: 4099 Mechanical power [kW]: 3.140 Thermal power [kW]: 4.272 Power fired [kW]: 8.134 Exhaust gas temperature [°C] 420 Exhaust gas flow [kg/s]: 5.7 AC generator ABB AMG 630 L6 Manafacture: ABB Model: AMG 630 L6 Type: AC Synchronous Generator Serial number:– Power [kVA]: 3294 Voltage [V]: 10.500 Frequency [Hz]: 50 Current [A]: 181 Speed [1/min]: 1,000 Year of construction: 1997

Key data: 3240 KW, 3294 kVA, 10500 V

Electricity and heat generator from 1998 with 61,000 operating hours, BSService at 50,000, then another 10,000 operating hours, complete (still installed). 1 available 2,635 kWel x 1,000 rpm, 10,500 V/ 50 Hz. AC generator: ABB AMG 630 L6, 3,294 kVA CHP Wärtsilä W16V25SG Manafacture: Wärtsilä Model: W16V25SG Type: Gas-fired CHP Serial Number: 4008 Mechanical power [kW]: 3.140 Thermal power [kW]: 4.272 Power fired [kW]: 8.134 Exhaust gas temperature [°C] 420 AC generator ABB AMG 630 L6 Manafacture: ABB Model: AMG 630 L6 Type: AC Synchronous Generator Serial Number: 106824 Power [kVA]: 3300 Voltage [V]: 10.500 Frequency [Hz]: 50 Current [A]: 181 Speed [1/min]: 1,000 Year of construction: 1998 Weight [kg]: 10.970

Manufacturer: Bütfering, Type: SCO 413/TQEQ, Year: 2007, Control: Programmspeicher 600, Barcode: möglich, Monting of the machine: Querschleifen/Längschleifen/Querschleifen/Enststaubung, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rollers: keine, Transverse sanding units: 2, Längsschleifaggregate: 1, Bürstenaggregate: 1, Belt 2 shoe unit: Querschleifen, Band 2 Leistung kW : 13,5, Band 2 Schleifbandgeschwindigkeit m/s : 2-16, Belt 2 synchronous and reverse run: Längsschleifen, Band 3 Kombiaggregat Walze/Schuh: Schuh, Band 3 Leistung kW : 15, Band 3 Schleifbandgeschwindigkeit m/s : 2-18, Band 4 Kombiaggregat Walze/Schuh: Querschleifen, Band 4 Leistung kW : 13,5, Band 4 Schleifbandgeschwindigkeit m/s : 2-16, Separation of sampling in mm: 25, Frequency control of belts: 3, Continous adjustable feeding speed m/min: 4- ...

Manufacturer: Heesemann, Type: LSM 8, Year: 2016, Control: PC 10,4 , Monting of the machine: Walze / Walze, Sanding width mm: 1350, Sanding hight mm: 0,5 - 100, Number of sanding belts: 2, Sanding belt dimensions: 2620 x 1350, Table hight adjustment by engine: no, Steel roller: 2, Band 1 Leistung kW : 45, Band 1 Schleifbandgeschwindigkeit m/s : 0,1 - 24, Band 2 Leistung kW : 37, Band 2 Schleifbandgeschwindigkeit m/s : 0,1 - 24, Belt 2 synchronous and reverse run: yes, Frequency control of belts: 2, Table hight adjustment by engine: no, Continous adjustable feeding speed m/min: 5 - 25, Vacuum table: yes, Brushing unit: 1,5 kW, Year :2016

Manufacturer: Hess, Type: Junior, Year: ca1987, Control: L/L, Software: yes, Barcode: 190, Monting of the machine: 4 - 150, Equipment of machine 2: 2, Double sided sanding line: 5 - 25, Steel roller: yes, Steel roller: yes, Belt 1 shoe unit: 5,5, Belt 1 combined unit: 5,5, Band 2 Kombiaggregat Walze/Schuh: 1, Band 2 Innenliegendes Drucklamellenband : yes, Band 2 Schleifbandgeschwindigkeit m/s : 280, Belt 2 pressure segment belt: yes, Belt 2 synchronous and reverse run: yes, Band 3 Kombiaggregat Walze/Schuh: yes, Year :ca1987

Manufacturer: Heesemann, Type: LSM 8, Year: 2003, Control: Steuerung der Anlage Neu, Monting of the machine: Quer / Längs / Bürste / Bürste, Sanding width mm: 1400, Sanding hight mm: 3 - 120, Number of sanding belts: 2, Sanding belt dimensions: 2.620 x 1450, Transverse sanding units: 1, Längsschleifaggregate: 1, Band 1 Leistung kW : 15, Band 1 Schleifbandgeschwindigkeit m/s : 0,5 - 12, Belt 2 shoe unit: yes, Band 2 Schrägstellbar Grad : 15, Band 2 Innenliegendes Drucklamellenband : 0,5 - 12, Band 4 Schleifbandgeschwindigkeit m/s : 16, Belt 4 synchronous and reverse run: 2, Frequency control of belts: 5 - 25, Combi unit roller/shoe: 2,2, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: yes, Typ/Stückzahl: 5,5 kW, Vacuum table: 4,0 + 1,5 kW, Brushing unit: 250 + 150 mm, Ionising: 7.600, Year :2003

Manufacturer: DMC Breitbandschleifmaschine, Type: Topsand, Year: 1994, Monting of the machine: Walze/Schuh/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Shore roller 1: ca.85, Längsschleifaggregate: 22,5, Belt 2 shoe unit: 15, Belt 2 synchronous and reverse run: 15, Belt 4 pressure segment belt: no, Combi unit roller/shoe: 8-25, Table hight adjustment by engine: ca.5, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: Struckturbürste von unten, Vacuum table: Bürste, Pressure pads for short workpieces: 180, Segment sanding shoe: von Unten, Year :1994

Manufacturer: DMC, Type: Topsand, Monting of the machine: Walze/Walze/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Steel roller: 1, Shore roller 2: 70, Längsschleifaggregate: ca.30, Belt 2 shoe unit: 22, Belt 2 synchronous and reverse run: 17, Combi unit roller/shoe: 5-25, Table hight adjustment by engine: ca.2, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Vacuum table: yes,

Manufacturer: Costa, Type: T 1350, Year: 1998, Monting of the machine: schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 1, Sanding belt dimensions: 3250 X 1350, Längsschleifaggregate: ca.17, Bürstenaggregate: yes, Band 2 Kombiaggregat Walze/Schuh: 10-20, Belt 4 pressure segment belt: yes, Belt 4 synchronous and reverse run: 32, Elektronische Tastung mm: yes, Table hight adjustment by engine: ca.1,5, Transportbandantrieb kW: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Year :1998

x-travel: 560 mm y-travel: 410 mm z-travel: 510 mm Control: PC-Fusion-CNC 640M table surface area: 900 x 410 mm workpiece weight max.: 500 kg tool taper: SK 40 spindle turning speed range: 12000 U/min feed range: 1 - 8000 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Used in 1-shift operation (prototyping). Operating hours: 15000 h - CNC control Mazatrol PC-Fusion-CNC 640M - 30-station ATC - Air blow device on the spindle - Niagara cooling / flushing system 100 L / min. - Cooling through the spindle 15 bar - Coolant tank: 200 L - Chip conveyor - 3 lamps to indicate machining status - Automatic switch on/off including warm-up function - CNC option package Performance EIA/ ISO - Synchronous tapping, spiral interpolation, Mazak Tornado Tapping, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 68 KW, 85 kVA, 400 V

PTO generator 85 kVA for field operation, optionally also for yard operation Aggregate type: transportable Design: Weatherproof IP 44 PTO : 540 Technical Data Generator: Generator manufacturer: WA Generator type: WA-ZB 85/4 Gene. No.: on request Generator power: 85 kVA Dimensions of the unit: Width approx. mm: 800 Height approx. mm: 923 Length approx. mm: 1,204 Weight approx. KG: 386 Scope of delivery: PTO generator for field operation, optionally also for yard operation, building seizing with 1H socket according to VDE 0100-551 with synchronous three-phase generator, incl. electronic voltage regulator AVR in protection class IP 44 (splash-proof) Gearbox for 540 PTO Tractor power / min. KW 125 Tractor power / min. hp 170 PTO speed / rpm 400 Generator speed / rpm 1,500 Required PTO / NM 2.671 Sockets / Mennekes / PCE  ...

Power resistor, wire potentiometer, resistor, braking resistor, tube fixed resistor -Manufacturer: Frizlen, power resistor type RZM20-1K/4.7K -Synchronous motor: Berger Lahr RSM 47/8 -Voltage: 220V 50Hz 375 rpm -Dimensions: 220/110/95 mm -Weight: 0.9 kg

Gear motor, electric motor, electric gear motor, three-phase synchronous motor -Manufacturer: Heynau, gear motor type GX3-56 / 4-BH -Speed: 33 rpm i 40.09 -Motor: ABM Greifenberger type EFB 1/3 DBF 56 a-4 -Power: 0.09 kW 1350 rpm -Construction: B3 -Hollow shaft: Ø 14 x 30 mm -Brake: 1.4 Nm -Dimensions: 324/116 / H180 mm -Weight: 6.5 kg

Gear motor, electric motor, electric gear motor, three-phase synchronous motor -Manufacturer: Sew-Eurodrive, gear motor servo motor -Gearbox: Type KHF47 / A 11 rpm i 131.87 -Motor: Type CMP71S / PK / RH1M / SM1 -Speed: 0 - 2000 rpm -Construction: B5 -Hollow shaft: Ø 35 x 175 mm -Protection class: IP 65 -Dimensions: 600/205 / H210 mm -Weight: 33 kg

adjustable gear motor, variable speed gear motor, electric motor, synchronous worm drive -Ceds Duradrive: Type DAPE-WH003-0250.04633.00 -Motor power: 0.18 kW -Speed: 213 rpm -Hollow shaft: Ø 14 x 75 mm -Construction: B3 -Dimensions: 270/125/H190 mm -Weight: 6 kg

Hydraulic cylinder, synchronous cylinder, steering cylinder -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) -Stroke: 20 mm -Dimensions: 234/89/H50 mm -Weight: 3 kg

Rotary drive for air flaps, rotary air flap drive -Type: GCB136.1E -3-point, 5 Nm, 2 auxiliary switches -Maintenance-free, reversible synchronous motor -overload-proof through magnetic hysteresis coupling -robust and light plastic housing on steel base plate -Hand adjustment and position indicator -Built-in, freely adjustable pair of auxiliary switches Technical specifications: -Run time: 150 s at 50 Hz with a 90 degree angle of rotation -Nominal rotation angle: 90 degrees -Max. Rotation angle: 95 degrees -Operating voltage: 24 VAC -Power consumption: 2 VA -Auxiliary switch setting range 0...90 degrees -Housing protection class: IP 40 -Weight 0.8 kg

Electromechanical actuator for valves, valve drive, actuator, servomotor -Type: Siemens SQL85.00 -Electromotive valve drive Nm 24 VAC, continuous control -Microprocessor-controlled, maintenance-free synchronous motor -Switchable electronic characteristic -selectable control signal -Block-proof gear with force-dependent end position switch-off, wear-free thanks to optocoupler -Hand adjustment and position indicator -Autocalibration for control signal and position feedback

Key data: 40 mm, 40 , 600 U/min

Material: PE, PP, PS, ABS, Year of construction: 2000 Capacity: approx. 100 – 300 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Propulsion: 110 kW (DC) more details: synchronous, degassing with vacuum pump, screws and cylinders segmented, Strand nozzle, water bath, strand granulator. NEW control cabinet for heating and motor control (Siemens S7, touch screen) Optional: Side loading

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Superior Electric SLO-SYN Synchronous / Stepping Motor stepper motor -Type MO92-FD08 -Shaft: Ø 10 x 30 mm -Quantity: 2x stepper motor available -Price per piece -Dimension: 125/85/H85 mm -Weight: 2.4 kg/pc.

Mazak Integrex 200Y cnc lathe Swing: 21.226″ Chuck Size: 8″ Max RPM: 10,000 RPM Tailstock: Yes Control: CNC (Mazatrol Fusion 640T) Max Swing : 21.25″ Max Machining Length: 39.5″ Spindle Nose – Main: A2-6 Spindle Bore – Main: 2.4″ Spindle Speed – Main: 5,000 RPM Spindle Motor – Main: 30 HP Tailstock Travel: 37.5” Min Spindle Indexing Increment – Main/Sub: 0.001 X-Axis Travel: 15.87″ Y-Axis Travel: +/- 3.15″ Z-Axis Travel: 42″ Rotary Tool Speed Range: 10,000 RPM Tool Capacity: 40 Equipped with: Mazatrol Fusion 640MT Control (2) PCMCIA Slots / 2 GB Hard Drive Variable Feed Rate Control 10.4” Color CRT / RS-232 / 3.5” Floppy / (2)PCMCIA Tool Life Monitoring Tool Wear Compensation Tool Eye Measurement Background Tool Path Check EIA/ISO Option Package Door Interlock Coolant Through Milli ...

- Control: Sinumerik (Index C200-4D) - Rod passage 65 mm - Speed 5000 1/min - Turret 1 with 8 stations (all driven), incl. synchronous spindle - Turret 2 with 6 stations (all driven) - Revolver 1/2 travel: X1= 90, Z1= 290 mm X2= 81, Z2= 80 mm - Back processing 5 Rear Drilling Stations - C axis -Conveyor Machine weight approx. 3000 kg Footprint including control cabinet and chip conveyor: LxWxH: 3430 x 1240 x 1750 mm Loading magazine: INDEX MBL Weight: approx. 2,000 kg Dimensions LxWxH: 4500x1100x1500 mm

Key data: 48 KW, 60 kVA, 400 V

PTO generator 60 kVA and with switch, field and house operation for IT & TN network and insulation monitoring Technical Data Generator: Generator manufacturer: Endress Generator Type: PRO18L G/4 60KVA Gene. No.: on request Generator power: 60 kVA Voltage: 400 / 231 Volt Power factor: Cos. - phi 0.8 Speed: 1500 rpm New PTO generator 60 kVA – Brushless with electronic voltage regulator AVR – Synchronous – Switchable between field and home operation (TN / IT network) with insulation monitoring in protection class IP 44 according to CE (2006/95 EC) TN network for feeding into a building according to VDE 0100-551 Supplement 1 with 1h coded socket. Sockets for Field Operation – IT Network with Insulation Monitoring 230 Volt Schuko / 16 Ampere yes 230 Volt CEE 6 H/ 32 Amp. -/- 400 Volt CEE 6 H /32 Amp. yes 400 Volt CEE 6 H / 63 Amp. ...

STAR SB-20R type G CNC turning centre was manufactured in 2014 in Japan. The machine is distinguished from other machines of its type by its compact size and a range of features that allow it to perform virtually any type of machining on workpieces with a maximum diameter of 20 mm. The maximally durable and rigid design additionally ensures the incredible stability and rigidity of the process, required to achieve excellent turning precision and quality. Inside the large working area there are two spindles (main spindle and sub-spindle) with C-axis, which are driven by reliable high-power motors. The sub-spindle, in combination with the driven tools, allows completely independent machining after capture. The lathe also features a revolutionary guide sleeve change system, which allows the machine to switch between guide sleeve and no guide sleeve mode. The STAR SB20R type G Swiss-typ ...

STAR SV-38R CNC turning centre built in 2015 in Japan, stands out for its unparalleled flexibility and broad functionality, which makes the machine ideal for complex applications in many industries t.e. automotive or aerospace. With the help of two spindles (main spindle and sub-spindle) with C-axis, the STAR SV 38R CNC lathe performs precision machining of inclined surfaces, including front and back angle holes in up to 11 axes. Both spindles of the machine are driven by reliable, high-power motors, which is used for the versatile use of cutting tools taken from the tool holder or the 10-position turret tool head. A special system for guiding the end of the Z-axis spindle through the headstock also guarantees high rigidity and stability at the cutting point. The STAR SV38R lathe is offered with an extensive range of equipment, including an FMB turbo 5-55 / 3200 A bar feeder, workpie ...

Key data: 315 KW, 350 kVA, 400 V

Deutz Emergency Power Generator BF 12 M 716 Diesel emergency generator from 1967 with 462 operating hours, Oil loss due to seal damage on the turbo. 1 available 280 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: A. V. Kaick R7100d4, 350 KVA Diesel engine Deutz BF 12 M 716 Manufacturer: Deutz Model: BF 12 M 716 Type: Diesel (Emergency) Generator Set Serial Number: 18835 0 0198 Power [KW]: 315 Year of construction: 1967 Hours: 462 AC Generator A. V. Kaick R7100d4 Manufacturer: A. V. Kaick Model: RJ100d/4 Type: AC Synchronous Generator Serial number:– Power [KVA]: 350 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 605 Speed [1/min]: 1,500 Year of construction: 1967 Weight [kg]: 1.642

Wartsila 2 x 16V32LN Diesel Generating Sets Two identical units. Prime mover is Wartsila 16V32LN diesel engine which is 4-stroke, turbocharged and intercooled made in year 2004. Engines are coupled with ABB synchronous and brushless alternators. Both engine and alternator are installed on rigid common base frame and they have been operated in very limited hours. They are recently dismantled from a vessel and are ready for immediate transportation. Gensets are outside under tarpaulin and auxiliaries and turbos and governors are in a warehouse. Inspection is possible by appointment only. Technical data: Engine type Wartsila 16V32 LN-CR Number of units 2 Output 6.3 MWe / 60 Hz/ generator Rotation Speed 720rpm Manufacturing year 2004 Alternator ABB AMG0900XU10SE Voltage / Frequency 11000 V/ 60Hz

Labelling Machine SIDEL Flexible SL90 F85 Cold Glue / Self-Adhesive This SIDEL SL90 labelling machine has three roll feed labelling modules for the application of adhesive (pressure sensitive PSL) labels and three pre-cut cold-glue paper labelling stations both designed for round glass bottles 275 – 660 ml. Operation is anticlockwise. Machine has been operated from 2012 to 2020 when it was dismantled and placed in a warehouse. The labelling machine SL90 operates in continuous mode and automatically adjusts the flow of incoming and outgoing containers. It is also equipped with a camera vision system which is installed in the initial section of the central carousel to detect and identify the containers. It also ensures correct application of the labels on even more complex formats. This system is ideal with containers made of glass, PET and other transparent materials. The con ...

Key data: 790 V, 1000 , 400

Deutz MWM Gas Generator TBG 620 V12 gas-fired power generators from 1998, Motor and generator on base frame. 1 available 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2, 1,000 KVA Gas engine Deutz MWM TBG 620 V12 Manufacturer: Deutz MWM Model: TBG 620 V12 Type: Gas Engine Serial Number: 2200047 Power [KW]: 790 Year of construction: 1998 Hours:– Weight of aggregate [kg]: 7.800 AC Generator Stamford PE734C2 Manufacturer: Stamford Model No.: HC I634K2 Type: AC Synchronous Generator Serial number:– Power [KVA]: 1,000 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1443 Speed [1/min]: 1,500 Year of construction: 1998 Weight [kg]: 2513

Key data: 790 V, 1000 , 400

Deutz MWM Gas Generator TBG 620 V12 gas-fired power generators from 1998, Motor and generator on base frame. 1 available 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2, 1,000 KVA Gas engine Deutz MWM TBG 620 V12 Manufacturer: Deutz MWM Model: TBG 620 V12 Type: Gas Engine Serial Number: 2200073 Power [KW]: 790 Year of construction: 1998 Hours:– Weight of aggregate [kg]: 7.800 AC Generator Stamford HC I634K2 Manufacturer: Stamford Model No.: HC I634K2 Type: AC Synchronous Generator Serial number: 0095677/01 Power [KVA]: 1,000 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1443 Speed [1/min]: 1,500 Year of construction: 1998 Weight [kg]: 2513

Diesel Power Plant MAN 57.9 MW / 50 Hz – year 2014 This diesel power plant consists of three identical 19.3 MW MAN 18V48/60 TS diesel generating units with auxiliaries. The engines are 500 rpm turbo charged with intercooling and they are installed on base frame forming a wet oil sump for engines. Diesel generators have been operated only approx. 5000 hours since new. Alternators are ABB made synchronous generators which are air-cooled, and they have their own lubrication oil system installed on concrete foundation and connected to the engines with flexible couplings. Engines are cooled with two separate cooling circuits connected to radiator cooling system. The control system is MAN SaCoS One. 11 kV breakers are Siemens SF6 type. The plant is still installed and fully operational and in good technical condition. Main technical data Manufacturer: MAN Augsburg, Germany Manufa ...

Overview The labeler was manufactured in 2016 by the German manufacturer Gernep. The machine is still assembled and can be inspected at any time,  Technical details  Output: up to 25,000 bottles/h  PET bottles  Bottle and label format parts  0,5l  0,75l  1,0l  1,5l      Roll-fed labeling unit with cutting and vacuum drum and a driven roll holder Complete hotmelt station with heated infeed and non-contact dot gluing at the beginning and adjustable end gluing bar at the end of the label 2. Motorized roll holder with label roll diameter of 600 mm Automatic splicinq system for connecting two label rolls for non-stop labeling Regulation of the belt speed synchronous to the labeling machine by means of a frequency converter Spare and wear parts package incl. 2 sets of cutting blades available Swivel arm for machine control panel and display 3 operating modes:  Manual mode  Autono ...

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm Weinig Unicontrol 6 with NC spindles ----------------------------------- Technical data summary (please inquire about any additional accessories included) ... Generally ----------------------------------- > Loading dimensions: 7000 x 2400 x 2400 mm > Machine weight, approx.: 3700 kg crosscut saw ----------------------------------- > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Laser directional light to detect the saw section Electronically safe length stop ----------------------------------- > Length 3600 mm 1. Tap and slot spindle ---------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustme ...

Key data: 17 mm, 40 , 1200 U/min

Kategorie / Category: Twin-screw extruder / Twin-screw extruder Nummer / Number: DE27684 Manufacturer / Manufacturer: Leistritz Typ / Type: ZSE 18 HPe Baujahr / Year: 2009 Capacity: approx. 40 - 60 kg/h Motor: 9.4 kW AC max. screw speed: 1,200 rpm Screw diameter: 2 x Ø 18.8 mm L/D: 40:1 Material: PE, PP, PS, ABS + fillers // more details: synchronous, atmospheric degassing, segmented screws and barrels // Control: MacromateXX Siemens with visualization //

Working width: 1350 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS Unitek wide belt sander Excel LC 1350 1N KRT --------------------------- 1-BELT MACHINE WITH COMBI UNIT ROLLER/SHOE FOR SOLID WOOD VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm 1350 - GRINDING BELT LENGTH mm 1370 X 2150 - MAX. WORKPIECE THICKNESS mm 160 - Steel CALIBRATION ROLLER mm 180 - GRINDING SHOE WIDTH mm 50 - BAND MOTOR POWER HP 15 - BELT SPEED m/s 18 - FEED MOTOR POWER HP 0.75 - Adjustment gear feed carpet with infinitely adjustable speed m/min 4/ 20 - HEIGHT ADJUSTMENT MOTOR HP 0.33 - Mechanical BAND OSCILLATION ECO GEAR PATENT SYSTEM” - 1 PC. DRUM BRAKE for belt braking - Swivel ROLLER for belt tension - 2 pcs. PRESSURE ROLLERS, with rubber coating - EMERGENCY STOP SWITCH EDGE in the inlet - ELECTRONIC DISPLAY ...

Complete with SCHMID LM 3200 bar loader Spindle passage 51 mm Turning length 280 mm Control SIEMENS, SINUMERIK 840 C INDEX control, C 200-4 Travel x1 90 mm Travel z1 280 mm Travel x2 81 mm Travel z2 80 mm Max spindle speed . 6300 rpm Rapid traverse Rev. 1 24/24 m / min Rapid traverse Rev. 2 16/24 m / min X / Z axis feed force Rev. 1 5500/5500 Nm X / Z axis feed force Rev. 2 8300/5500 Nm - Revolver 1 for 7 tools + synchronous spindle - Revolver 2 with 6 tool places - 4 rear drilling stations (1 of which guided) - C axis

Robotized cell for 3D laser cutting 3D laser cutting cell, powered by a TRUMPF LASER TRUDISC 2000 (FD24) source. The line includes: ROBOT FANUC R-2000iB 165 F year. 2007.XII. + CABINET + TEACH PENDANT HEAD FOR LASER CUTTING PRECITEC LD 30C D50 YR30 LENZE MCM09C30 -RS0F1 SYNCHRONOUS SERVO DRIVE 2 PCS ROTARY TABLE EXPERT-TUNKERS TYPE ED920 / 1655/2 POWER SOURCE TRUMPF LASER TRUDISC 2000 (FD24) SICK SAFETY CURTAINS INSTALLED ALBANY DOOR HIGH-SPEED DOOR SYSTEM MP300 CONTROL PANEL SIEMENS SIMATIC MULTI PANEL + SOFTWARE CONTROL CABINET FIBER OPT CUTTING CELL (external 3.4 x 5.2 m, height 2.9) Additionally, we include full cabling necessary for the operation of the 3D cell. If you have any questions, we remain at your disposal