sx 75 used for sale

Transnorm belt curve conveyor GKF 1650-750-550 IR600 70° right RA1441 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 1650  ...

Transnorm belt curve conveyor left GF 45°-750-550 IR700 RA1390 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 766 mm Frame ...

90° curve roller + 750 mm straight piece as combination Rolling curve: Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 750 mm Usable width: 400 mm Total width: 450 mm 10 rolls, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Siding: on both sides including Optionally available: 2 piece double supports Features: Running direction: RIGHT condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,25/S1 scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach tele ...

Haas HAAS UMC 750 Machining Center :::SPECIFICATIONS::: CNC Model: Haas Tool connection: iso 40 Spindle power: 22,4Kw Number of spindle revolutions: 12000 Number of tools: 40 X Shaft Travel: 762mm Y-axis stroke: 508mm Z-axis stroke: 508mm Rapid feed linear axes X Y Z: 30,5m/min Guides: roller Tilting rotary table: yes Round table type: continuous Grades rotary table: + 110 -35 Table size: 630 x 500mm Load allowed on the table: 300Kg High cooling pressure: yes Pressure value: 21bar Chip evacuator: carpet Presetting: yes Machine equipment: - P-COOL programmable refrigerant nozzle - Extended memory 750 MB - High-speed machining package - Ethernet interface - VISUAL QUICK LOAD conversational conversation programming system - Early detection of power failures request form - Auxiliary refrigerant filter system - ...

The inclination scale is fully functional. The scope of delivery includes: 01x Inclination scale, used Manufacturer: Rapido-Werke Dimensions: approx. 1,250 x 1,360 x 2,250 mm (WxDxH) Maximum load: 750 kg Feet: 04x / height adjustable with tare compensation Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Key data: 544 KW, 680 kVA, 400 V

Well-preserved diesel generator Low operating hours has been at a standstill for the last 10 years. Mailable Exhaust gas heat exchanger + bypass, muffler, table cooler, available.

S. No.: 43000129 Counter: 61 Mil. Clicks Equipment / additional information: HP IndiChrome Plus 7-color on-press printing White ink kit Enables use of white ink Technical specifications Printing speed 120 four-colour a4 images per minute (two-up); 240 two-colour or monochrome a4 images per minute (two-up) Image resolution 812 and 1219 dpi at 8 bit, addressability: 2438 x 2438 dpi HdI (High definition Imaging) Paper format 330 x 482 mm maximum Image format 317 x 464 mm Paper weight Coated: 80-350 gsm; Uncoated: 60-320 gsm; thickness 70-400 microns Press dimensions Width: 5443 mm; depth: 2298 mm; Height: 2104 mm with Donaldson Ultrafilter Very good condition / tested, checked, cleaned, dismantled & secured by a specialist.

Manufacturer: Tesa SA Vermessungtisch, Type: Messfeld 560 X 750 X 410 MM<CRLF>, FREETEXT1: Rechner und Steuerung sind vorhanden, FREETEXT2: Anlage wird vor <CRLF>Verkauf auf Funtion geprüft,

Ref. -No.: 10103 Manufacturer: MAAG Year of construction: 1976 Type of control: Konventionell Control: N/A Storage location: Halberstadt Country of origin: Schweiz Minimum number of teeth: 6 Max. Number of teeth: 300 Serial no.: 4216 Gear width: 200 mm Max. Pile driving: 225 mm Max. Wheel Diameter: 750 mm Min. Wheel Diameter: 30 mm Table Diameter: 500 mm Max. Module: 10 mm Min. Module: 1 mm Spiral Angle: 0/60 °

Manufacturer: Block-trafo EMI Filter , Type: HLD110 500/75 520 V AC 75A AC 50-60 Hz , Sale without warranty: UR=520 V AC, No right of return: HPF 25/085/21, Installation height: 75A AC,

A dust absorber is a device that is connected to the ventilation system. Its function is to extract suspended particles. This task is fulfilled by the fan and filters built into the device. Using a dust absorber improves air quality, making it easier to keep the machine clean. As a result, the life of the device is extended. Using it is also safer for the environment and the health of the operator. Specifications: Power supply: 400V AC 50hz Capacity: 3000-4000 m³ Rated power: 7.5kw Filtration area: 40 m² Number of filters: 4 pcs Filter size: ⌀325mm Filter height: 660 mm Weight: 400 kg Height: 1980 mm Width; 1000 mm Depth: 1000 mm

pressure: 75 t throat: 300 mm stroke: 16-140 mm no. of strokes: 105 Hub/min ram - range of adjustment: 80 mm table surface area: 800x600 mm ram surface: 650x260 mm hole in the table: Ø180 mm table height: 920 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: BxTxH 1500x2500x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 760 mm, 510 mm, 510 mm

Inv. Num. : 3616 Type: ARROW VMC 750 Producer: CINCINNATI Created: 1999 Parameters: Control system: Acramatic 2100 Work table length: 950 mm Work table width: 520 mm Maximum table load (uniform): 450 kg Spindle drive power: 8.75 kVA Tool magazine: 21 pieces Maximum vertical spindle speed: 6000 1/min Mechanical feed length axis X: 760 mm Mechanical feed length axis Y: 510 mm Mechanical feed length axis Z: 510 mm Cone: ISO 40 Machine height: 2700 mm Machine length: 2800 mm Machine width: 2920 mm Machine weight: 5.5 t

table length: 2000 mm table width: 1000 mm table height: 200 mm weight of the machine ca.: 730 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1500 kN, 750 cm³

Plates 510x400 mm Clamping force 150 t max. injected volume 750 cm³ clear width 440 mm

turning diameter over bed: 290 mm turning diameter over slide rest: 170 mm turning length: 750 mm turning speeds: 75 - 2000 U/min centre height: 145 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK tailstock quill stroke: 80 mm connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,34 t dimensions of the machine ca.: 1,3 x 0,75 x 0,7 m 2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type Of Laminator: Solvent and Solventless // Working Width: 1325 mm

Year: 2012 The machine has been in production since 2017. - technically efficient, ready to work - after full service - four-head welding machine VS 750 - EV 850 4-axis CNC cleaning machine - transport/cooling station - rotating station - online connection - automatic work cycle - profile height: 30-185 mm - welding dimensions: 350 x 350 mm, 2600 x 4000 mm - 0.2 mm and 2 mm flash reduction - seal formatters - Windows touchscreen operator panel - drilling head for the lower/upper hinge - disc cutter 250 mm - 1 axis of longitudinal travel with gripper

1 Piece Used Forced Mixer / Plate Mixer Manufacturer: Liebherr Type ZE 750/500 Output: 0.5 m3 Including various spare parts Price: on request AT CALL Location: Brandenburg Offer and prices are purely net ex location Subject to prior sale, errors and/or misrepresentations excepted, without guarantee and/or warranty, as seen, lying and/or standing

Key data: 760 mm, 400 mm, 500 mm

Inv. Num. : 7084 Type: Mikron VCE 750 Producer: HAAS Created: 1998 Parameters: Maximum table load (uniform): 1350 kg X-axis travel: 760 mm Y-axis travel: 400 mm Z-axis travel: 500 mm Number of stacking positions: 20 pieces Equipment: 4. Axis (turntable) Axis C

Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 1500 mm -Depth: 750 mm -Height: 800 mm -Drawers: 5 -Weight: 80 kg -Conductive table top with: Anka-Plast covering

Stainless steel VA chimney cover, chimney hood -Bracket distance inside: 460 mm -Dimensions: 755/1065/H400 mm -Weight: 14 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 7550 mm -Height of table top: 196 mm -Working height: 196 mm -Transport dimensions: 7550/490/H196 mm -Weight: 1726 kg

Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 1500 mm -Depth: 750 mm -Height: 780 mm -Drawers: 5 -Weight: 80 kg -Conductive table top with: Anka-Plast covering

Pallet rack, heavy-duty rack, high rack, plug-in rack, storage rack stand -Form 1: Number: 4x depth 750 mm height 2100 mm -Form 2: Number: 2x depth 600 mm height 2100 mm -Price: complete -Scope of delivery: without crossbeams -Total weight: 60 kg

Radial fan, chip extractor, fan, suction, chip fan -Centrifugal fan in a galvanized housing, soundproofing -Motor power: 30 kW -Speed: 2920 rpm -Volume flow: 36000 m³/h -Total pressure: 1600 Pa -Connection input: Ø 800 mm -Connection output: Ø 750 x 600 mm -Dimensions: 2500/2350/H2700 mm -Weight: approx. 1500 kg

Field roller, grassland roller, meadow roller, soil roller, roller -for hill bed: adjustable increase -Diameter: 750 mm -Working width: 2000 mm -Equipment: Can be filled with water

Workbench, work table, assembly bench -Workbench: with conductive table top and drawer cabinet -Width: 1500mm -Depth: 750mm -Height: 780mm -Drawers: 5 -Table top: with Anka-Plast covering -Number: 13x workbench available -Price per piece -Weight: 89 kg/pc.

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Rubber rollers: Ø 300 mm -Transport roller width: 750 mm -Recording: 15 mm -Number: 13 rolls available -Price: per piece

Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, drive controller -Manufacturer: Nord, NORDAC frequency converter -Type: SK 500E-750-323-A -Power: 0,75 kW -Input: 1/3ph 200-240VAC 47/63Hz -Output: 3ph 0-Input-V 0-400 Hz -Quantity: 1x inverter available -Price per piece -Dimension: 230/75/H155 mm -Weight: 1.4 kg/pc.

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 313 mm -Transport width: 750 mm -Shaft: recordings Ø50 x 70 mm -Quantity: 1x transport roller available -Total dimensions: Ø 313 x 935 mm -Weight: 77 kg/piece

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 215 mm -Transport width: 750 mm -Shaft: recordings Ø40 x 70/60 mm -Quantity: 1x transport roller available -Total dimensions: Ø 215 x 880 mm -Weight: 39 kg/piece

Welding fume filter, welding fume extraction, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, filter system, filter block -Manufacturer: Fischer Umwelttechnik, filter block exhaust air purification system type 4600 -Rated power: 2.2 kW -Individual components: see photos -Dimensions: 910/750/H2250 mm -Total weight: 226 kg

Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, drive controller -Manufacturer: Nord, NORDAC vector mc frequency converter -Type: SK 750/3 FCT 278007550/28E300094075 -Power: 1.5 kVA motor 0.75 kW -Input: 3AC 380/460V 47/63Hz -Output: 3 AC 0-Input V 0-400 Hz -Control Box: MC 278900000/23E300087776 -Dimension: 200/110/H135 mm -Weight: 1.7 kg

Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply, servo amplifier -Manufacturer: Hauser, servo controller servo amplifier 2 pieces with rack -Type: HBV 750 SEO HBMR 55 A4-445 -Price/charge: complete -Total dimensions: 390/250/H310 mm -Weight: 8.4 kg

Fieldbus, Profibus, PLC control, automation technology, controls and regulators, end module, fieldbus controller, PLC terminal, digital input terminal -Manufacturer: Wago, digital input terminal from Demag D 100-275 NC injection molding machine -Type: 750-400 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg

Fieldbus, Profibus, PLC control, automation technology, controls and regulators, end module, fieldbus controller, PLC terminal -Manufacturer: Wago, end module from Demag D 100-275 NC injection molding machine -Type: 750-600 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg/pc.

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch, 5-port Fast Ethernet Switch, Controller Ethernet -Manufacturer: Wago, controller Ethernet switch from injection molding machine Demag D 100-275 NC -Type: 750-842 -Dimensions: 70/50/H100 mm -Weight: 0.2 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Wago, 8-channel digital input terminal -Type: 750-431 -Number: 1 piece available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

Power supply rails, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Wago, potential feed terminal -Type: 750-602 -Number: 1 pieces available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

PTC relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal, bus terminal -Manufacturer: Wago, 8-channel digital output terminal -Type: 750-530 -Number: 2 available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

Workbench, work table, assembly bench -Workbench: with drawers, solid construction -Width: 1525mm -Depth: 750mm -Height: 850mm -Drawers/cabinet doors: each 2x, lockable/without lock -Number: 2x workbench available -Price per piece -Weight: 106 kg/pc.

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Pipe grab: unfortunately without type designation -Pipe diameter: approx. 400 to 750 mm, see photos -Dimension: 930/470/H1140 mm -Own weight: 124 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø120 x 44mm -Heating power: 750 W -Voltage: 230V -Dimensions: 200/120/H60 mm -Weight: 0.4 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrier rollers -Transport roller: diameter 315 mm -Transport width: 750 mm -Shaft: recording dimensions see photo techn. drawing -Number: 1x transport roller available -Total dimensions: Ø 315 x 940 mm -Weight: 81 kg/pcs

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrier rollers -Transport roller: diameter 240 mm -Transport width: 750 mm -Shaft: recordings Ø50 x 175 mm -Number: 1x transport roller available -Total dimensions: Ø 240 x 1100 mm -Weight: 82 kg/pcs

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrier rollers -Transport roller: diameter 322 mm -Transport width: 750 mm -Shaft: recordings Ø40 x 95 mm -Number: 1x transport roller available -Total dimensions: Ø 322 x 940 mm -Weight: 62 kg/pcs

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrier rollers -Transport roller: with rubber coating, diameter 236 mm -Transport width: 750 mm -Shaft: recordings Ø50 x 100/450 mm, dimensions see photo techn. drawing -Number: 1x transport roller available -Total dimensions: Ø 236 x 1300 mm -Weight: 53 kg/pcs

Hardness tester, hardness measuring machine, hardness tester, hardness tester, impact hardness tester, hardness comparison plate, test block, calibration and adjustment plate -Manufacturer: SiB, hardness reference block test block -Type: 199HBW 5/750 -Dimension box: 180/170/H35 mm -Weight: 1.4 kg

Proximity switch, proximity sensor, position switch -Manufacturer: Festo, proximity switch orig -Type: SME-8M-DS-24V-K-0.3-M8D 706 755 -Number: 2x switches available -Price per piece -Dimensions packaging: Ø 100 x 10 mm -Weight: 0.1 kg/pc.