We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,312 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
power capacity:2x 5,5 kW feed pressure:16 bar liter capacity:2 x 585 l /min Receiver capacity:750 l total power requirement:380 V,50 Hz,11,2A, 2x5,5 kW weight of the machine ca.:940 kg dimensions of the machine ca.:3000 x 900 x 1650 mm
used
Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 293 g - Injection rate: 230 cm?/s - Injection pressure: 2.360 bar - Injection volume: 318 cm? - Screw speed: 230 rpm - Nozzle stroke / force max.: 350/67 mm / kN - Ejector stroke / force max.: 200/83 mm / kN - Clamping force: 3.000 kN - Mould opening stroke max: 850 mm - Mould height min: 350 mm - Daylight between platens max: 1.200 mm - Platen size (h x v): 1050 x 650 mm - Mold opening force: 196 kN - Control: CC100 - Oil tank capacity: 810 l - Power: installed max: 55 kW - Dimensions (long x wide x high): 6.700 x 2.000 x 2.300 mm - Weight: 21.000 kg
used
Article: three-phase current motor Manufacturer: Antriebstechnik Bauknecht Type: RFV 22/4-75P e.g. to use as spindle motor for Schutte multispindle automatic lathe SF51Dnt Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
new
table length: 2400 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,74 t dimensions: 2,4 x 1,2 x 0,9 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2+N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17 - 19.0 mm. The holes have a diameter of 16mm. Hole arrangement in a 50 mm grid on the table top, Side panels 150mm with parallel hole arrangement in a 25mm grid. Incl. basic foot equipment. Table height 850mm Price plus packaging and transport. Other dimensions available. The accessories shown are not included in the scope of delivery. Optionally available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
LASKA VACUUM CUTTER KU 750 V
new
Holzstar KSO 750 Edge Grinder With oscillating sanding belt for good removal performance, a clean grinding pattern and a longer service life of the sanding belt With height-adjustable grinding table Standard with -45° to +45° infinitely adjustable miter and workpiece stop Infinitely inclined grinding unit (0°-90°) for vertical and horizontal grinding Table height adjustment by means of handwheel Robust work table made of cast iron with T-grooves, stable stand of the machine when working With height-adjustable additional table for contour grinding Fast and easy sanding belt change via quick clamping system Spring-loaded clamping device for uniform belt tension Abrasive sole with graphite coating as standard Suction nozzle Ø 100 mm With lockable storage option in the standard substructure Equipment details: Thanks to the infinitely variable grinding unit, the edge gri ...
used
Chuck diameter: 120mm
used
Frees blok; freesblok; freesmachine; uitwendige maat 170 mm; hoogte 75 mm; asgat 40 mm; v.v. wisselmessen
used
used
Clamping force [kN] 1600 Dimensions of mounting plates (hxv) [mm] 750x750 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 412 Injection weight [g] 392 Injection pressure [bar] 1909 Dimensions and weight Net weight with control cabinet [t] 8.8 Dimensions (length x width x height) [m] 5,800 x 1,700 x 2,400
used
Travels X/Y/Z: 885mm/600mm/600mm, travels B/C: -10° - 110°/360°, rapid traverse X/Y/Z: 9000mm/min, speed: 28000rpm. Table dimensions X/Y: 950mm/650mm, operating hours: 90711h, spindle hours: 19457h. Including workpiece measuring probe, tool changer with 100 places.
used
Center height: 165mm, center width: 750mm, Morse taper: 4, grinding diameter small/large: 80mm/200mm, internal grinding small/large bore: 5mm/100mm, max. grinding depth: 250mm.
used
Connected load: 84kVA, length: 5065mm, width: 1100mm, height: 1530mm.
used
Clamp force: 750kN, heating output: 11kW, weight: 3t.
used
Clamping force: 750kN, opening stroke: 40kN, connected load: 18.5kW, weight: 7.5t.
used
Connected load: 104kVA, operational hours counter: 18,775h, the chain of the chain rail system was replaced in 2018.
used
Press which can be used for manufacturing seals / (resin) composite parts / compression molding / circular sawblades / abrasive products / pressing from (metal)powder to parts / ... with heated table + 2 watercooled tables max 220-240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Multiple cycles can be programmed Press with 2 pistons: Capacity lower piston: 750 ton (with digital readout for applied force) Capacity upper piston (counter pressure): 250 ton (with digital readout for applied force) Passage between uprights: 850 mm Distance between table -- ram: 500 mm Table: dia 800 mm Weight of press: 14 ton Compression press / Grinding wheel press / Vulcanizing press / Elastomer press Kompressionspresse / Schleifscheiben Presse / Vulkanisierpresse / Elastomer Presse Height: 3700 mm Weight: 14 ton
used
Drive rotational speed: 1.9/min, torque: 2300Nm, Anschlussleistung: 1,1kW.
used
Offer: Battenfeld HM 400/2250/750S Year/year 2011 ps: new screw + cylinder 65mm/ new screw+barrel 65mm Production year: 2011 Control: Unilog B6S Injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 cc Injection weight: 981/325.8 g Tool closure system: 400/... Clamping force: 400 t Dimensions of the tool plate: 1450 x 1350 mm Distance between the spars: 900 x 710 mm Tool height: 1175 mm Opening distance: 600 mm plate spacing: 1775 mm Pump motor power: 75 kW Cylinder heating belts power: 29.4/12.1 kW General data: Pick-up date: Immediate Dimensions (m) LxWxH: 7.0 x 2.4 x 3.3 m Weight: 22100 kg Instrumentation: - 4 x hydraulic core - 8 x cascaded control - 1 x air valve - 1 x extendable column for changing forms - Batteries - Robots - Conveyor belt - Restricted access ...
used
Z-blade mixer,stainless steel,Strømmen,tiltable with lid.
used
Boring power: 16 mm throat: 152 mm bore stroke: 80 mm no. of turning speeds: stufenlos spindle turning speed range: 450 - 2500 U/min spindle taper: B 16 / MK 2 table surface area: 200 x 200 mm Distance spindle/table max.: 500 mm voltage: 230 V / 50 Hz total power requirement: 750 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 0,5 x 0,4 x 1,0 m • drilling table adjustable in height, inclinable and tiltable as well, • with chip protection, • quick-action jaw chuck 16 mm, • small vice, • sound protection level: 81,2 dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Stomach and paunch cleaning machines is designed for mechanical cleaning of beef, pork, and sheep stomachs. The machine is made of stainless steel. 2 Pieces available. Dimensions: L: 1000 mm x W: 900 mm x H: 1500 mm Machine can be screwed to the floor. Capacity about 75 litres. Programable time of work.
used
Keyence XG-7501P Multicamera Image Processing System Control Control Unit XG7501P Manufacturer: Keyence Manufacturer Part Number: XG-7501P Type: Multi-camera image processing system, control unit side cover included Country of manufacture: Japan Item condition: This article comes from a company dissolution of one of the largest automotive parts suppliers in Germany and was stored there in paternosters, so some original packaging is missing and some articles have traces of stock
used
Technical data for the pallet rack stand: Shelving system: Polypal Type: Maxipal Included in delivery are: 01x pallet rack stand, used Material color: blue Stand type: MXMO 5225P Stand profile: 110 x 83 x 2.5 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 8,750 mm high 1,100 mm deep
used
Jackdal trolley Overwrough sewing machine KL 759
used
Mondial Celtic 14 Ø 370 x 750 mm Distance between centers: 750 mm Swing over bed: 370 mm Swing over cross-slide: 200 mm Diametre of main spindle bore: 35 mm Power on main spindle: 2,2 kW Number of speeds: 24 Length: 1900 mm Width : 730 mm Height: 1500 mm Weight: 815 kg
used
General: Year of construction 2005 Power 0.5 kW
new
table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The Professional 750 4-280040.PD 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional 750 Article no. 4-280030.PD 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional 750 Article no. 4-280030.P 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,55 t The Professional 750 table article no. 4-280040.P 3000x1500x200 mm has a Hole arrangement in a 100 mm grid on the table top and a parallel one Hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has one Material thickness of approx. 24.5-27 mm and is made from high quality steelS355J2 + N manufactured. Grid lines at a distance of 100 mm make it easier for you to set up your Contraption. The welding tables are provided with a scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 99500 € : 1820.85 € : 9600x54x1,6 mm : 20-100 m/min : 800 mm : 800 mm : 1300x750 mm : rund 800 mm, quadrat 770 : rund 570 mm, quadrat 570 : rund 800 mm, quadrat 770 : 880 mm : 0.12 kW : 0.37 kW : 7.5 kW : 5050 mm : 2200 mm : 2900 mm : 6700 kg Hydraulischer Spannstock Digitalanzeige für Winkelanzeige Hydraulische Klemmung des Sägearmes Sägearmdrehung von Hand Stufenlos einstellbare Absenkgeschwindigkeit des Sägearmes Automatische Sägerahmenanhebung nach Schnittende Sensitive Schnittdruckregulierung in Abhängigkeit der Materialbeschaffenheit Hydromechanische Bandspannung über Manometer ablesbar Mobiles Bedienpult Schräg verzahntes konisches Schwerlastgetriebe Angetriebene Späne Bürste Bandführung über Hartmetallplatten und Rollen Automatische Bandbruchsicherung Kühlmitteleinrichtung HYDRAULISCHE ANHEBUNG DES SÄGERAHMENS Bet ...
used
Meidinger S-HRZ10C/180/750/2 Centrifugal fan Meidinger S-HRZ10C/180/750/2 Centrifugal V m³/h: 2410 Pst Pa: 28913 Pt Pa: 29329 N 1/min: 4800 Location: LG270 Year of construction: 2006 p kg/m³: 1,2 t °C: 20 Pv kW: 29,17 Engine Size: 200 Number of poles: 2 Type: B3 Rated power: 30 kW
used
EKU 750-6-1 6 burner gas stove 39 kW 6 burners 39 kW total power Stand-alone unit W 1200 x D 750 x H 850 mm open substructure More gas stoves in other sizes - new and used - can be found in our shop! International shipping costs on request!
used
material width: 0750 mm material thickness: 12,00 mm no. of straightening rolls: 19 sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 50 mm run-in height: 900 mm total power requirement: kW weight of the machine ca.: 10,00 t dimensions of the machine ca.: m HÄMMERLE HYDRAULIC LEVELING MACHINE - GF BRUGG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
used
Description Compressor Worthington Rollair RLR 750 BM 6 500 T with Hankison refrigerant-air dryer with approx. 28,000 operating hours fully automatic, internally completely piped and wired compact system, single-stage oil-injected, air-cooled, silenced Operating pressure 10 bar Volume flow 40 m3/hour Capacity 5.5 KW Boiler 500 litres ROLLAIR_550_2000_EN
used
Inv. Num. : 6278 Type: ES 750/175 HL Producer: ENGEL Generated: 2001 Parameters: Clamping force: 155 t
used
Material clamp, material gripper, load clamp Support clamp, lifting clamp , block pliers Manufacturer: NORDGREIF Type 7548 Year of construction: 1997 Payload: 500 kg Gripping distance: 280 to 420 mm - Width adjustment via trapezoidal thread with hand crank - Rubber coating on the gripping surfaces - for crane operation - with CE marking Net weight: 50 kg good condition; used
used
used
Complete welding fume extraction for 7 places with filter, extraction, silencer, The system was purchased for training purposes, installed and never put into operation. Plant cost well over 50,000 euros. Extraction ( turbine ) RE71-500-1-D/2/11,0/RDO/2900 9.9kW Filter AIR RECEIVER The system is sold complete with pipe system.
used
Exellent working condition capacity 600 - 800 Liter mixed cream per hour. The mixing machine is based on a manual method of mixing dry ingredients into a fluid. A constant flow of incoming (aerated) fluid is needed. The capacity of the hopper/feeder is frequency controlled even as the mixing speed. Composed of a Rotor-Stator mixing head with pins -Injection of dry product -seeds -into a liquid for controlled mixing and dosing ▪All stainless steel ▪Useful capacity up to 600/800 kg / hour depending on the ingredients GENERAL - Type : M-750 - Machine number : 975.107 - Year : 2010 - Electrical connection : 230 V, 50 Hz - Dimensions L W H : 1330 950 1200 mm - Weight : 380 kg MIXING HEAD - Shaft seal : Mechanical-seal - Distance bush : 61 mm - Cooling facilities : Stator and Cover MIXINGHEAD DRIVE - Make : Nord ...
new
WARTSILA GOVERNOR ACTUATOR, CODE NO: 220001, PART NO: A8251-758, SERIAL:12330204 BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720
new
pressure: 060 t stroke: 350 mm table surface area: 750x344 mm dayligth: 197/750 mm distance between columns: 750 mm diameter of piston: 75 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Control Haas Clamping table surface ... 500mm Axis X ... 762mm Axis Y ... 508mm Axis Z ... 508mm Spindle speed.. 0-8100 rpm controlled axes ... 5 cooling ... 69bar BT 40 workpiece weight... 300kg Magazine slots ... 40+1 L x W x H ... 3990 x 2340 x 2570mm Machine weight ... 8664kg The machine is in good condition, possible to test under electricity.
used
Engine: Diesel engine CAT C9 Power: approx. 261 kW / 350 PS - Waves with 7/7 writing with 5 knives per write (regenerated) - Refractive beam with comb (regenerated) - Chain drive - Discharge belt with discharge height of approx. 3,400 mm - Permanent - Belt magnet with hydraulic height adjustment -Remote control Weight: approx. 24 t regenerated according to HAMMEL standard
used
Silo mixer: 7500 litres, motor: 11 Kw (15 hp). With pelican mouth and electrical panel.
used
Manufacturer: Hämmerle Type: TRM 50/750 Year of construction: 1990/ 2023 Overhauled: 2023 Sheet width: Max. 750 mm Sheet thickness: approx. 0.5-12 mm Part length in flow direction: min. approx. 100mm Feed speed: 2-20 m/min Number of straightening rollers: 19 pcs Diameter: 50mm Workpiece inlet height: 900mm Power requirement: 31kW Total weight: approx. 10.000kg
used
Key data: 120
Extrusion line for manufacture of PS-PE-ABS-PP sheets etc ... Brand: Siepla Year of manufacture: 2008 Four-cylinder grille with servo-controllers Flat head: Maximum head width: 1000mm Maximum aperture up to: 2mm Minimum aperture: 200 microns Built-in shear for cutting plates. Two single-screw extruders: Ø 120mm and Ø 75mm MAAG melt pump and vertical pump: 1300 m3/h, 1350 rpm. Type: G160A Drag trolley Production capacity: 250 – 350 Kg/h Horizontal hydraulic changer with double cavity: Ø 16 mm. Manuals are available for each machine station as well as for compliance with EC directives.
used
Machine Details Stock-No. 1105-03827 Type of machine Machining Center - Vertical Make CINCINNATI Type ARROW 750 Year of manufacture 1997 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORKS Technical details X-Travel 762 mm Y-Travel 380 mm Z-Travel 510 mm Table-size 865 x 510 mm spindle taper ISO 40 spindle turning speed range 60 - 8000 rpm Rapid traverse 24 m/min spindle drive motor 9 kW Tool Change Unit 21 fold CNC-control HEIDENHAIN TNC 426 voltage 380 V table load 750 kg Throat 550 mm coolant yes total power requirement 30 kVA weight of the machine approx. 4.3 t Additional information - control: HEIDENHAIN TNC 426 - Coolant Equipment - machine lamp Lot Off Tools