sx 75 used for sale

Transnorm belt curve conveyor right GKF 20°-750-550 IR1300 RA1477 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 640 mm Fr ...

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 75 mm -Piston diameter: 32 mm -Piston rod: 16 mm -Price: per piece -Number: 4 pieces -Dimensions: 126/45/H75 mm -Weight: 0.5 kg/ piece

Transnorm belt curve conveyor GKF 180°-750-550 IR1000 left RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 4820 mm F ...

Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 680 mm Fram ...

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 75 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 123/64/H71 mm -Weight: 0.95 kg

Data sheet of retrofit POS. GE 22.10 Gebhardt 7.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7.449 mm (incl. upper bow piece + straight piece) Upper bow piece length: 392 mm Upper straight piece length: 3,830 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 1700 mm H 2 above 2,800 mm Difference in altitude: + 1.100 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction  ...

Transnorm belt curve conveyor left GF 45°-750-550 IR700 RA1390 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 766 mm Frame ...

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 750 mm -Short cone: 8 (Ø 140 mm) -Bolt circle: Ø 171 mm -Weight: 248 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 748 mm -Rezess: 350 mm -Hole circle: Ø 600 mm -Weight: 100 kg

GRP barrel, storage container, storage container, silo system, tank, fertilizer storage silo -Material: GRP -Storage silo: 750 liters -on: stand -Mannhole -Dimensions: 1650/920/H900 mm -Weight: 130 kg

Transnorm belt curve conveyor GKF 1650-750-550 IR600 70° right RA1441 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 1650  ...

Iddon 75mm Cold Feed Rubber Extruder With roller feed With motor, gearbox and control panel

Three-phase motor with 2 speeds, electric motor -Power: 7/20.5 kW -Speed: 975/1460 rpm -Shaft: Ø 48 mm -Construction: B3 -pole changing -Protection class: IP 54 -Dimensions: 690/430/H360 mm -Weight: 186 kg

Stainless steel chimney cover, chimney cowl -Inside bracket spacing: 460 mm -Dimensions: 755/1065/H400 mm -Weight: 14 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 7550 mm -Height of table top: 196 mm -Working height: 196 mm -Transport dimensions: 7550/490/H196 mm -Weight: 1726 kg

The inclination scale is fully functional. The scope of delivery includes: 01x Inclination scale, used Manufacturer: Rapido-Werke Dimensions: approx. 1,250 x 1,360 x 2,250 mm (WxDxH) Maximum load: 750 kg Feet: 04x / height adjustable with tare compensation Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

S. No.: 43000129 Counter: 61 Mil. Clicks Equipment / additional information: HP IndiChrome Plus 7-color on-press printing White ink kit Enables use of white ink Technical specifications Printing speed 120 four-colour a4 images per minute (two-up); 240 two-colour or monochrome a4 images per minute (two-up) Image resolution 812 and 1219 dpi at 8 bit, addressability: 2438 x 2438 dpi HdI (High definition Imaging) Paper format 330 x 482 mm maximum Image format 317 x 464 mm Paper weight Coated: 80-350 gsm; Uncoated: 60-320 gsm; thickness 70-400 microns Press dimensions Width: 5443 mm; depth: 2298 mm; Height: 2104 mm with Donaldson Ultrafilter Very good condition / tested, checked, cleaned, dismantled & secured by a specialist.

Ref. -No.: 10103 Manufacturer: MAAG Year of construction: 1976 Type of control: Konventionell Control: N/A Storage location: Halberstadt Country of origin: Schweiz Minimum number of teeth: 6 Max. Number of teeth: 300 Serial no.: 4216 Gear width: 200 mm Max. Pile driving: 225 mm Max. Wheel Diameter: 750 mm Min. Wheel Diameter: 30 mm Table Diameter: 500 mm Max. Module: 10 mm Min. Module: 1 mm Spiral Angle: 0/60 °

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Quantity: 30x chain hoists -various manufacturers: Yale, Brand, BKS -Load capacity: from 750-3200 kg -Chain length 1.0-2.5 m -Price/Sale: complete -mostly functional -Dimensions: 1200/800/H600 mm -Weight including packaging: 600 kg

Proximity switch, proximity sensor, position switch -Manufacturer: Festo, proximity switch orig -Type: SME-8M-DS-24V-K-0.3-M8D 706 755 -Number: 2x switches available -Price per piece -Dimensions packaging: Ø 100 x 10 mm -Weight: 0.1 kg/pc.

Hardness tester, hardness measuring machine, hardness tester, hardness tester, impact hardness tester, hardness comparison plate, test block, calibration and adjustment plate -Manufacturer: SiB, hardness reference block test block -Type: 199HBW 5/750 -Dimension box: 180/170/H35 mm -Weight: 1.4 kg

A dust absorber is a device that is connected to the ventilation system. Its function is to extract suspended particles. This task is fulfilled by the fan and filters built into the device. Using a dust absorber improves air quality, making it easier to keep the machine clean. As a result, the life of the device is extended. Using it is also safer for the environment and the health of the operator. Specifications: Power supply: 400V AC 50hz Capacity: 3000-4000 m³ Rated power: 7.5kw Filtration area: 40 m² Number of filters: 4 pcs Filter size: ⌀325mm Filter height: 660 mm Weight: 400 kg Height: 1980 mm Width; 1000 mm Depth: 1000 mm

Model: Trak DPM 750 Type: AEVF Serial No.: 513352 Controls: Proto Trak MX3, switchable to MX2 Travel: X, Y, Z 750 x 400 x 610 mm Table size: 1270 x 320 mm Weight: 1900 kg Year of construction: 1995 Country of origin: Taiwan

Dear's The engine, the details of which are included, is also for sale in the form of a high-pressure pump. It has been used very low Please do not hesitate to call. Regards Hakan Kuşcu +905323642509

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 322 mm -Transport width: 750 mm -Shaft: Mounting Ø40 x 95 mm -Quantity: 1x transport roller available -Total dimensions: Ø 322 x 940 mm -Weight: 62 kg/piece

Mikron M7500 + SpyGlass Attachment Optics Type M 7500 Year of construction 2010 Software: RTV-Control RT V2.2.16.11+ Camera Driver for M7500 G runs on Windows 10 NP: 18.000,- net Basic measuring range : 200- 700 °C - with all documents Affordable thermal imaging camera with modern Ethernet interface and remote control options for demanding Real-time applications Stationary process camera for industrial and industrial Scientific applications

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø120 x 44mm -Heating power: 750 W -Voltage: 230V -Dimensions: 200/120/H60 mm -Weight: 0.4 kg

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Pipe grab: unfortunately without type designation -Pipe diameter: approx. 400 to 750 mm, see photos -Dimension: 930/470/H1140 mm -Own weight: 124 kg

length in total: ca. 3500 mm band width: ca. 700 mm conveying height: ca. 1200 ejection height approx.: 1200 mm dimensions of the machine ca.: ca. 3500 x 1300 x 1650 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Workbench, work table, assembly bench -Workbench: with drawers, solid construction -Width: 1525mm -Depth: 750mm -Height: 850mm -Drawers/cabinet doors: each 2x, lockable/without lock -Number: 2x workbench available -Price per piece -Weight: 106 kg/pc.

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch, 5-port Fast Ethernet Switch, Controller Ethernet -Manufacturer: Wago, controller Ethernet switch from injection molding machine Demag D 100-275 NC -Type: 750-842 -Dimensions: 70/50/H100 mm -Weight: 0.2 kg

Fieldbus, Profibus, PLC control, automation technology, controllers and regulators, end module, fieldbus controller, PLC terminal -Manufacturer: Wago, end module from Demag D 100-275 NC injection molding machine -Type: 750-600 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg

Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Fram ...

Used staniless steel juice and other liquids pressure filling line into glass bottle 0,25-1L with twist off closure made by Polish company Robak Konin. Capacity 2000 bottles/h. The line includes: Bottle washer with 10 rinsing heads suitable for: Bottle diameter 45 mm to 100 mm range. Bottle height 105-260 mm. Standard bottle head diameter 28mm. Bottle head regulated 18-43mm. Bottle transporter, Bottle filler with 10 filling heads. Automatic closer for bottles. More info available upon request. Line includes automation control cabinet. Technical documentation available in Polish. MIssing labeler. Also available for this line is bottle cooler for a separate price. The line is in good condition

Transnorm conveyor belt GF 750-700-600 RA2226 Technical data: Conveyor length (NL): 750 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DRS71M4/MM05 Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 750 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m ...

Lippert belt conveyor GF 19100-750-600 RA2247 Technical data: Conveyor length (NL): 19100 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 19100 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m ...

Lippert belt conveyor GF 18000-750-600 RA2246 Technical data: Conveyor length (NL): 18000 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 18000 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m ...

Fieldbus, Profibus, PLC control, automation technology, controls and regulators, end module, fieldbus controller, PLC terminal, digital input terminal -Manufacturer: Wago, digital input terminal from Demag D 100-275 NC injection molding machine -Type: 750-400 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 313 mm -Transport width: 750 mm -Shaft: Mounting Ø50 x 70 mm -Quantity: 1 piece available -Total dimensions: Ø 313 x 935 mm -Weight: 77 kg/

Lippert belt conveyor GF 24000-750-600 RA2245 Technical data: Conveyor length (NL): 24000 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 24000 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor speed m / ...

Lippert belt conveyor GF 28200-750-600 RA2248 Technical data: Conveyor length (NL): 28200 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 28200 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor speed m / ...

Offer 23294 Specifications: - Flat steel shears - knife length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm - Sectional steel shears - L- steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Bar steel shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Punch punch - punching force approx. 750 KN - - Infinitely variable stroke 0 - 70 mm - Perforates in steel up to 30 mm Ø in 20 mm - Projection 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - With: - 2 E. foot switches for two separate workstations - Slewing ring

throat: 750 mm punch diameter: max. 75 mm max. sheet metal thickness: 4 mm weight of the machine ca.: 250 kg dimensions of machine L x W x H: 1,41 x 0,75 x 1,47 m max. punch cap. in steel ø 75 in 2,0 mm, in aluminium ø 75 in 3,2 mm resp. ø 55 in 4,0 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lippert belt conveyor GF 12730-750-600 RA2259 Technical data: Conveyor length (NL): 12730 mm Frame width (NB): approx. 750 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R37 DRE80M4/TH/Z Electrical data: 50Hz V380-500, kW 0.75 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 12730 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie  ...

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 90 mm -Transport width: 750 mm -Number: 1x transport rollers available -Dimensions: Ø 90 x 780 mm -Weight: 8 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 90 mm -Transport width: 750 mm -Number: 3x transport rollers available -Price per piece -Dimensions: Ø 90 x 785 mm -Weight: 6.9 kg/pc.

Lippert rising falling Incline belt conveyor GF 3050+800-750-600 RA2258 Technical data: Conveyor length (NL): 3850 mm ( 3050 mm + 800 mm ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DR63LA/TH/Z Electrical data: 50Hz V380-500, kW 0,25 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3850 ( 3050 + 800 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentrala ...

Electric motor, three-phase motor -Electric motor: Type B14-80x0.75x3000A -Power: 0.75 kW -Speed: 2790 rpm -Shaft: Ø 19 x 40 mm -Design: B14 -Protection class: IP 44 -Dimensions: 275/160/H210 mm -Weight: 11 kg

Lippert belt conveyor GF 4450-750-600 RA2257 Technical data: Conveyor length (NL): 4450 mm Frame width (NB): approx. 750 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 2427 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns  ...

Lippert belt conveyor GF 8000-750-600 RA2254 Technical data: Conveyor length (NL): 8000 mm Frame width (NB): approx. 750 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 8000 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns  ...