We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,376 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets
pressure:200 t table length:2500 mm table width:2000 mm stroke max.:2050 mm dimensions:ca. 9200 x 4700 x 5800 mm draw back pressure:25 t Approx. weight (w/o operational materials):50 t column diameter:210 mm table speed:25 mm/sec table extendable:2000 mm table speed:30 mm/sec table load:15 t power capacity:20 kW work speed:1 - 10 mm/sec. pre-running speed:10 mm/sec :25 mm/sec :10 mm/sec. Oil Tank Capacity:400 l Oil cooling (electric):1,5 kW (max) Podestal height:650 mm Table Height:800 mm Ram Height:850 mm Control System by Siemens:S7 1200 Monitor:WEG 12 Zoll :10200 ? Maintenance Balcony:5000 ? :4.000,-- ? :1.000,-- ? :18000 ? :1.500,-- ? :12000 ? Upper Tool Folding:170 Grad Swivel table:75 Grad Table tiltable:75 Grad Ajecters with 60T in the pestle centre:12000 ? Blessed plate folding by 180 degrees:14000 ?
used
Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets
new
Swing boom crane boom crane with ZYBA-MAT Manufacturer: Strödter Type: ZP 60 / SAZ 60 D1 Built: 2014 New and unused Load capacity permissible load weight max: 25 kg Working radius approx.: 3,000 mm Stroke max: 800 mm Lifting speed max. : approx. 800mm/sec. Energy supply: pneumatic Mounting: Swing boom with stand column Net weight device (with load-carrying equipment): 287 kg Pneumatic working pressure: 6 bar Air quality required for maximum load-bearing capacity: clean, dry and filtered (5 microns) Air consumption max.: approx. 17 Nl/ double stroke ZYBA-MAT on the swivel boom Pneumatic balancing control with automatic scale
used
Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets
used
Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets
used
Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets
used
Bosch Turbo Scara SR 800EC robot + control IQ 150 + handheld control unit PHG 2000 Manufacturer: Bosch Order No. 3842506428 Series No. 764840020 Maximum load on gripper flange: 100 N Stroke 3rd axis 320 mm Pn.-Duuck 4-8 bar Weight: 100 kg Swivel range see diagram Item condition used In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.
used
Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets
new
The CE20 belongs to the series of our electrically operated high-pressure machines with a pressure of 200 to 500 bar and a volume flow of 16 to 45 l/min. The standard version has hard rubber tyres with a parking brake at the rear and swivel castors at the front. The "Slim version" has a narrower design and also has narrower rear wheels with a parking brake. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The standard model has a dimension of 1060 x 760 mm. The "Slim" version has a very compact dimension of 1060 x 500 mm. Both versions are 850 mm high. The standard and slim versions are identical in all other specifications. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- CE20-200 50Hz 200 bar 38 l/min. CE20-200 60Hz 170 bar 45 l/min. ...
used
Technical data: -Table size 1600 x 370 mm -Work area of the axles -X (longitudinal) 1000 mm -Y (transverse) 320 mm -Z (vertical) 420 mm -Milling head left + right Tilt + Swivel - 9 table feeds 20-800 mm / min -Rapid traverse longitudinal / transverse 3000 mm/min -Rapid traverse vertical 1375 mm / min -maximum distance spindle - top 480 mm -min / max distance spindle Center / stand 450 mm -Tool holder ISO 50 - work spindle speeds in 12 levels adjustable 45-1400 RPM - coolant system - powered 400 V / 5,8 kW -Space requirement approx. B H 2100 x 2200 x D 2800 mm -Weight approx. 3500 kg
used
Technical data: -Capacity approx. 200 kg -Throat depth 800 mm -Working height in horizontal position approx. 1000 mm -Mot boom. left + right swivel - arm arm manually Tiltable -Mot face plates. left + right rotatable - faceplate speed infinitely variable - faceplate diameter 300 mm - adjustable control panel with control make ESAB, type 6 PTF, BJ. 97 - space requirement approx. B H 1100 x 1300 X 1600 mm -Weight approx. 300 kg
new
The CP22 belongs to the series of gasoline-powered high-pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 46 l/min. The machine has pneumatic tyres with a parking brake on the rear axle and swivel castors on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with electric starter. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CP22-170 170 bar 46 Lpm CP22-220 220 bar 36 Lpm CP22-280 280 bar 27 Lpm CP22-350 350 bar 23 Lpm CP22-500 500 bar 16 Lpm General Specifications: ----- Drive motor: 2 Cylinder 4 Stroke Petrol Engine, Electric Start Power of the drive motor: 16.4 kW Spee ...
used
Technical data: -Load capacity 30 kg -Faceplate diameter 280 mm -Faceplate swivel - faceplate RPM elect. infinitely variable - re + Li - run -Foot switch -Transmission of welding current 300 A -Drive 220 V - table height in horizontal position 360 / 890 mm -mobile base -3 jaw Chuck -Space requirement approx. B 550 x H 890 x T 550 mm -Weight approx. 50 kg
used
: 4100 No.1 gebr. Rods - machining center 5 - axes Fabr. LID MAHO, DMC type 60 S Bu. 2002 with Sinumerik 840 D - Powerline Shopmill ARB.-ber.: 760 x 460 x 560 mm Power: 19/28 kW Accessories: NC Swivel Head (B-axis) 120 / + 30 ° 60-Fach tool magazine with taper cleaning NC rotary axis (A-axis) with collet Chuck clamping top 65 Tailstock, hydraulically tweeter NC bar loader 1100 mm Workpiece pick-up facility with discharge conveyor Production package with -Coolant tank 600 l, INTERLIT SKA 200-760 - IKZ 40 bar through the Centre of the spindle -Conveyors -Rotating viewing window Tool measurement Fabr. BLUM Oil mist extraction Mode 4 Other: HSK-A 63 spindle speed range up to 18,000 min-1 Feeds up to 50 m / min Rapid traverse 50 m / min Space requirement approx. 5 x 4 x 2.8 m (see floor plan) Weight approx. 13 to Shipping dimensions approx. 12 lane meters in maxi ...
used
CNC machining tool Morari Swivel unit with recording ISO-30 maximum speed 15000 rpm with test certificate Built in 2000 Excellent condition, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
new
TORO SWIVEL BENDING MACHINE TYPE ESF 1020 B -Capaciteit 1020 x 2 mm -Boven-en ondermes in segments -Maximum buighoek 138 ° -Voetklemming -Weight 280 kg DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
Facilities: -Console machine with cantilever -Pneum.. Workpiece stops with double-acting cylinders -Pneum.. Assembly AIDS -additional editing fields front (4-field machining) -Handheld -C axis -Swivel sawing unit to the grooves in the X - and Y-direction -Horizontal milling unit for lock box -Plate tool changer driving with - laser positioning aid for the cleaner -autom. Central lubrication system Technical data: -Traverse path Max X: 3.259 mm -Traverse path Max Y: 1,483 mm -Maximum Z: travel 325 mm -Speed Max x: 75 m / min -Speed Max Y: 75 m / min -Maximum Z: speed 30 m / min -Workpiece thickness max: 100 mm -Spindle motor power: 7,5 kW -Main spindle speed: 1000-18000 RPM -Recording of main spindle: HSK 63F -Recording spindles: M10 with 11 mm fit -Number of vertical spindles: 14 pieces -Number of horizontal twin spindles in the X direction: 1 piece in the Y-d ...
used
Butterpack machine, margarine packaging machine, packing machine Stations: Swivel cell Paper fending and folding equipment With photo cells pressure centering Date stamp station with thermal pressure Volumetric dosage with trough Final folding station Parcel launch station Exhauting tape 1,000 mm long Format: 100 x 75 x 35 mm = 250 size or other format for additional price Products: Butter or similar products Dosage: Volumetrical 100 â 250 grams, infinitely adjustable Dosage accuracy: +/-1% Unwrap material: Parchment, concealed aluminium foil Date: Dye-stamp print Power: 40 packages/min.
used
Technical data Raddurchm. 900 mm Module 9 Capacity 21 KW Weight 11 to Max wheel diameter: 900 mm Wheel width 500 mm Module max 9 Milling cutter diameter 200 mm Tischaufspannï¬?ächen fit 720 mm Speed range 20-320 RPM. Feeds axial 0, 06...6, 0 mm/Rev. Proposed ' ube radial 0.02 bis2, 0 mm/Rev. Swivel spindle slide right/left: 45° space ca. 3000 x 1600 x 2.400 mm Weight ca. 11 to Power ca. 21 KW
We have 3 cranes for sale. 2x column edwing crane (250kg payload of the brand ABUS) and 1x wall swivel crane (200kg payload of the brand ABUS). The cranes are in a top condition and were mounted only briefly, all documents are completely available.
used
Bearing number 1105-02690 Machine type Milling machine - Universal Make HERMLE Type UWF 1000 Built in 1988 Control type CNC Storage location FRANCE Country of origin Germany Delivery time SOFORT Freight base EXW Technical details x-way 700 mm y-way 630 mm z-way 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping area: 1000 x 490 mm Spindle speed Gear stage 1 25 - 400 rpm. Spindle speed Gear stage 2 401 - 1260 rpm Spindle speed Gear stage 3 1261 - 4200 rpm Feed 5 m/min Rapid speed 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with full cabin coolant device Sale takes place without clamping equipment approx. 8500h switch-on hours
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0 Positions APC: 0 CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16i-MB Operating hours: 4915 Technical data Number of axis simultaneous: 5 Rotary table:diameter: 630 mm Longitudinal travel (X-axis): 815 mm Transversal travel (y-axis): 745 mm Vertical travel (z axis): 500 mm Dimension of the workpice: Height: 500 mm Diameter: 630 mm Table load max.: 400 kg Swivel angle (a-axis): -120 / +30 ° C axis: 360 ° Tool magazine number of tools: 50 Tool diameter: 75 mm Tool diameter max.: 300 mm Diameter with free adjacent pockets: 150 mm Max. tool-weight: 10 kg Spindle nose: BT: 40 Distance spindle nose to table: 100 - 600 mm Spindle speeds: stepless from: 20 rpm up to: 20000 rpm Feed range: 0 - 24000 mm/min Rapid traverse: long.: 50 m/min Rapid traverse: transversal: 50 m/min Rapi ...
used
Power: 0 t Thread diameter maximum: 0 mm Thread diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. diameter threaded: 2 mm Max. diameter threaded: 48 mm Gewindelänge: 130 mm Min. pitch: 0.4 mm Max. pitch: 4 mm Min. roll die diameter: 100 mm Max. roll die diameter: 148 mm Roll bore diameter: 54 mm Roller pressure infinitely adjustable: 17 to Roll axis swivel for thru-feed: 8 ° Roll and pause time infinitely variable: 1 - 30 sec Shaft distance: min.: 120 mm max: 200 mm Feeds: stepless up to: 1.4 mm/s Roll speeds: stepless up to: 280 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 5.5 kW Machine´s weight about: 2141 kg Weight total installation approx.: 2401 kg Overall dimensions machine: Length: 1250 mm Width: 1200 mm Height: 1260 mm Space requirement of the electrical box: 800 x 500 mm Various accessories: Set of thread rolls
used
Mot. Welding turning and tilting table Make: DEUMA Type: DK 5000 S Machines - No.: 6890 Built: 1992 Offer number: 19110 Technical data: - max. Load capacity 5000 kg - Flat discs 1800 x 1300 mm - Flat disc hydr. swivel 0 - 90 / 135 ° - Rotational movement infinitely adjustable approx. R&din - Right - + Left-hand drive controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height at horiz. Position approx. 1450 mm - E. hand-held remote button - Space requirement approx. W 2000 x H 1450 x D 3100 mm - Weight approx. 4000 kg
new
Technical data: Fixed angular table: Fixed angular table clamping area: 800 x 400 mm Max table load: 200 kg Working spindle: Tool holder horizontally and vertically: ISO 40 Power of the main drive motor / 100% ED: 2.2 kW Vertical milling head: Speed range, tiered: (12) 50 - 2000 rpm Drill pinole, stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/man.: 385/400 mm Y-axis automatic/man.: 185/200 mm Z-axis automatic/man.: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: infinitely adjustable Rapid response: 1000 mm/min Characteristics: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle run max. 0.005 mm, incl. test protocol according to DIN 8615 (rolling bearing SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling (without d ...
used
1 x Universall tool-feeding machine Lid FP 4 Built: c.1970 Very robust and rare conventional machine in good condition. Technical data: Travel: X: 700 Y: 400 Z: 450 mm Spindle speeds: 31.5 - 1,600 rpm (18 levels) Tool holder: ISO 40 Pinole stroke: 115 mm Feed in X/Y/Z Feed range: X/Y/Z 5 - 500 mm/min (infinitely adjustable) Rapid response: X/Y: 10 - 500 mm/min Z: 5 -250 mm/min (18 levels) swivel handling table Clamping area: 860 x 500 mm Accessories: 1 x horizontal counter bearing 5 x horizontal frond spine Bftj7cazem 10 x vertical fraes aufnahme 36 x tension tension ingesheis from 0.5 - 18 mm 0.5 mm rising 5 x Direct clamping pliers D: 12/14/16/18/20 mm 1 x machine vice Manual various distance rings and accessories for milling machines complete documentation The machine can be inspected at our warehouse under electricity. A 3-axis digital ...
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 0 Technical data Number of axis total: 5 Longitudinal travel (X-axis): 3000 mm Transversal travel (y-axis): 2000 mm Vertical travel (z axis): 2000 mm vertical travel (Y-axis): 1720 mm Table divisions (B): 0.001 ° Swivel angle (a-axis): 175 ° Pallets: number: 8 Length: 1250 mm Width: 1250 mm Transport weight: 3000 kg Tool changer: Tool magazine number of tools: 640 Spindle nose: HSK-A: 100 Spindle speeds: stepless up to: 3000 rpm Feeds: X axis: 40 m/min Y axis: 40 m/min Z axis: 30 m/min Spindle motor: 50 kW Various accessories: FMS system (flexible manufacturing system) Coolant system Chip conveyor
used
Technical data Cutting surface at the top. 710 x 710 mm Clamping area 710 x 450 mm Swivel / Tiltable 0 - 90° mm Table height approx. 63 mm T-slot dimension (bottom / top) approx. 40 / 21.5 mm Weight approx. 560 kg Dimensions ( L x W x H ) 710 x 710 x 635 mm
new
Weibert FR3 Saw milling Demonstration device Format sliding table 2300mm or 2600mm Cutting height: 103mm Auslegertich kpl. Saw blade: swivel, max.315mm 3KW motors Milling: rigid 90° Milling rpm: Speeds: 1500/3500/6000/8000 rpm. Safety rails milling stop 500mm Right- and left-hand-running milling cutter WJ-400100
used
Y.O.M.: 1999 No.: 900/1 Scraper and Homo speed-controlled Vertical stroke, double jacket, swivel Temperature gauge, Vacuum, Ystral-Turrax Temperature control device GWK Type teco CS 90 Y.O.M.: 2002 Heating capacity: 9 kW Cooling capacity 23 kW, temperature maximum 95°C Dimensions LWH: 1200 x 800 x 1000 mm Weight: approx. 100 kg
used
Swivel cube table for radial drilling machines Table size: - horizontal: 500 x 600 mm - vertical: 310 x 600 mm Tiltable: 90° Dimensions LxWxH, approx.: 700 x 520 x 520 mm Weight, approx.: 280 kg
used
PETEWE optical tool and profile grinding machine PF 3S Projection area: 440320 mm max. grinding stroke: 15-105 mm Stroke number infinitely variable: 0 - 150 rpm. max. grinding wheels through: 175 mm Spindle speed infinitely variable: 5,000 rpm Swivel range grinding head in the horizontal X plane: x 15° side Y plane: . . . . . . . . . . . . . . vertical Z plane: -2° to +10° Grinding head slide movement in X direction: 120 mm in Y direction: 90 mm Adjustment of werkstuecktraeger in X direction: 160 mm in Y direction: 160 mm Sine-mounted clamping plate Clamping: 150 mm 230 mm Sine setting: 0-30°
new
Massive aluminium die-cast base Engine S1: 1800W Weight: 23kg HM Circular Saw Blade D: 305mm Idle speed 4200 rpm Swivel -45/+45° extendable back stop Quiet Belt narrow laser stroke marks exactly the cutting line Deep stop G&HM-KAP-305JL
used
High-performance column drilling machine Offer number: 17469 Make: ALZMETALL Type: AB 4 SV Machine No: 18498 Built: 1987 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Thread cutting device - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with pre-bedding - Level 1 - 80 - 210 rpm - Level 2 - 210 - 765 rpm - Extension 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - hydr. Feed cylinder for semi-autom. Workflow + Rapid Response - Table with 2 T-slots 720 x 360 mm - height-adjustable via rack with hand crank - max. distance table - drilling spindle approx. 780 mm - maximum distance machined base plate - drilling spindle 1250 mm - Lighting - Coolant device - Swivel arm control panel - Drive 400 V 4 kW - Space requiremen ...
used
Used storage heater Manufacturer Seipp Type UAGG 390- heats workpieces and ball bearings up to XXX kg With various yokes in different sizes Workbench model with swivel arm Applications: Chemical industry, steel industry, paper industry, transmission manufacturer, mechanical engineering, transport sector Voltage / Frequency / Power: 380 V / 50Hz / 35A Properties: When warming in a horizontal position, the maximum effect is achieved. Workpiece: Weight bearing max. xxx kg (other workpieces xx kg) Inner diameter 15/120 mm Outer diametermax. xxx mm Width max. xxx mm Automatic temperature: Magnetic sensor, control range 60 °C to max. 160 °C Aperture priority: Bays: Edge length 80mm, 70mm, 60mm, 40mm, 30mm, 20mm, 15mm - Induction heater - induction heater Special price
new
SAY-MAK SWIVEL BENDING MACHINE TYPE SCM-H 2060 - Capaciteit e 2060 x 1.2 mm - Max buighoek 135 ° DUTCHMACH Bhbyyphejo Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border) Request more information
new
Machine description • Machine body designed as torsion-stiff steel welded construction with high static and dynamic stiffness of the welding assemblies • Drive of the upper and bending cheeks on both sides via controlled high-performance drive motors with worm gears • Force initiation of the bending cheek on both sides via tooth segments • Adjustment of the lower cheek mechanically • Adjustment of the bending cheek lowering electromotor • Tool set consisting of: • Clamping rail for upper cheek pointed rail mechanically • Oberwangenspitzschiene • Lower cheek rail with finger grooves • 2 bending rails • Rear stop with 10 stop fingers integrated in support table, max. stop size 1000 mm • Color similar to RAL 7038 / 5010 • Machine in good condition / little used / regularly serviced Working width (useful length) 3020 mm Wor ...
new
New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing
used
Used cutting system Schmidler S4 Built: 2005r Condition: in operation, very good Technical data The machine has the following equipment: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor 2. Under-table swivel cross-cut saw with 4-axis control saw blade d=720mm, 3. Universal milling unit 4 -axis, combi cutter 350 diameter,100/20-,40-,60 he combi, finger cutter 40/140, swallowtail cutter 45mm 4. 1x drilling rig (2.2 kW) - drilling direction horizontally 5. 1x slotted unit, sword 10/50/400mm (3.0 kW) - direction of operation horizontal 6. 1x drilling rig (2.2 kW)– drilling direction vertically from below 7. 1x Profiel cutter, d=120mm, L=250mm with dovetail cutter working direction vertically from below 8. Marking device vertical 9. Control board unit, cutter thickness 20mm, 10. Fully automatic beam turning station 11. Tran ...
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0 Number of pallets: 0 CNC Brand: 0 CNC Model: 0 Control: PROTO TRAK A.G.E. 3 Technical data Number of axis total: 3 Table length: 1270 mm Table width: 320 mm Longitudinal travel (X-axis): 750 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 610 mm Table load max.: 600 kg Distance from vertical spindle to table: 610 mm Distance from spindle axis to slide ways: 480 mm Taper in spindle: 40 ISO Spindle speeds: number (steps): 2 from: 5 rpm up to: 3600 rpm Swivel range Vertical milling head: -90 / +90 ° Feeds (X, Y, Z): 5 - 3800 mm/min Vertical quill travel: 120 mm Quill feed speed: 0.04 / 0.08 / 0.15 mm/r Drill capacity in steel: 35 mm Threat cutting in steel M: 36 Milling capacity in steel: 80 - 150 cm3/min Boringout: 120 mm Voltage 50 Hz 3x: 415 Volt Milling ...
new
Saw milling Weibert FR3 new â?¢ Format sliding table 2000mm â?¢ Cutting height: 103mm â?¢ Boom table cpl. â?¢ Saw blade: swivel, max.315mm â?¢ 3KW motors (4KW) 400V 50HZ â?¢ Mill: rigid 90° â?¢ Milling rpm: speeds: 1500/3500/6000/8000 rpm. â?¢ Safety railmilling stop 500mm â?¢ Right- and left-hand-running milling â?¢ WJ-400100W7 Accessories: Driving equipment
used
Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 200 mm Table width: 120 mm Grinding-wheel diameter: 75 - 150 mm Grinding head: Spindle inclination (A-axis): -15 - 25 ° Height adjustment (Y-axis): 150 mm Hublage adjustment (X-axis): 90 mm Grinding spindle speeds: number (steps): 4 from: 1000 rpm up to: 4500 rpm Workpiece carriage: Radius adjustment (Z-axis): 80 mm Adjustment accuracy of the Z axis: 0.01 mm Courses support: 120 mm Max. Swivel angle (B-axis): 355 ° Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 1 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1180 mm Width: 1080 mm Height: 1520 mm Various accessories: Lamp Profil projector
new
Weibert HX Series 5 - Compartment combination machine NEW MACHINE! Engine power: 400V 3hp 3 motors Planing width: 310mm Planing shaft: 3-Tersahobel knife shaft Readthrough: 230mm, Format sliding table: 1250mm Saegeblatt max.250mm swivel 90°-45° Fraese 30's Spindle Rigid 90° Fraese rpm: 2 speeds 3000/6000 rpm. Long-hole drilling device
used
Spiral drill grinding machine Offer number: 20063 Make: SCHANBACHER Type: S 3-50 Machine Number: 92-2083 Built: 1992 Technical data: - Easy to use - Grinding process by means of gearmotor - Spiral drill dimensions 3 - 50 mm - Angle 90 - 140° - adjustable free angle - Grinding motor 400 V / 0.25 kW - Gearmotor for swivel movement 400 V / 0.12 kW - Grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - Space requirement approx. W 810 x D 570 x H 1260 mm - Weight approx. 120 kg - with - Clamping device - Presetting device
used
Used head machine GULLIVER, type: IRIS 20 -In bakery condition- For square buns or ciabatta - Machine in stainless steel - NEW tapes - 3 cutting rollers - Stepless adjustment of the cutting length (length section) - Inlet and outlet belt high folding - 2x flouring - Display swivel Sightseeing and test run are possible by arrangement.
new
Weibert K350 Format circular saw Format sliding table: 3.2m Engine: 5.5kW 400V 50Hz S1 Speed: 3800- 5200 rpm Saw blade diameter: max. 400mm Electrical height adjustment Electric swivel 0-45° Cutting height 90°: 120 mm Cutting height 45°: 75 mm Cutting width: 1250mm with pre-scratcher D=120 bore 20mm Electrical height adjustment Weight 1100kg
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0 Positions APC: 0 CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN MillPlus /3R-WorkMaster +3R-WorkShopManager Operating hours: 30452 Technical data Number of axis simultaneous: 5 Number of tables: 1 Number of spindles: 1 Circulary table diameter: 630 mm Number of T-channels: 9 Distance of the T-slots: 63 mm T-channel width: 14H7 mm Centering bore diameter: 50H6 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 700 mm Vertical travel (z axis): 600 mm Dimension of the workpice: Height: 1000 mm Diameter: 920 mm Table load max.: 500 kg Table divisions (B): 360 ° A axis Swivel angle (a-axis): +45/-30 ° Holding torque A-axis: 3866 Nm Clamping torque C-axis: 6008 Nm Torque max.: 2650 Nm Tool changer: Number of tools: 180 Tool diameter: 80 mm Diameter with free adja ...
used
Double miter saw Manufacturer: Düspohl Model: DGK 400 B Built: 2000 Cutting width: 100mm Cutting height: 100mm Saw aggregates Swivel: -45° - + 45°
used
CNC fine lathe Make: PetrolGer Type: TNL Control: Siemens 810T Built: 1991 Equipment and accessories: - Swivel loader system - Small conveyor belt - Charging-unloading gripper - Chip conveyors - Foot lever for clamping and relaxing the collet