swiss typ used for sale

WMW Union BFT 80/2 X: 1000 - Y: 1000 - Z: 1600mm Spindle Dia: 80 mm Spindle bore: ISO 50 Table dimensions : 1100 x 1000 mm Table longitudinal travel (X-axis): 1000 mm Cross travel Table/colom (Y-axis): 1000 mm Height travel head (Z-axis): 1600 mm Max travel spindle: 700 mm Power on spindle: 1250 rpm Power principal motor: 8,5 kW Weight: 11 ton

Offer 25251 Specifications: - Drilling capacity in steel ST 60 45 mm - Drilling capacity in steel ST 60 55 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1600 rpm - Right - Counterclockwise rotation - 3 Feeds electr. Magnetic indentation 0.1; 0,16; 0.25 mm/rev - Projection 360 mm - Max distance drilling spindle – table / base plate 775 / 1255 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 2.7 / 4.0 kW - Space requirement approx. W 800 x H 2100 x D 980 mm - Weight approx. 750 kg - with: - Machine vise - Keyless chuck 1 - 13 mm - Emergency stop button -Lighting

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 40 barProduction Package 40 bar Option includes: - Internal coolant supply 40 bar; - Tank capacity: 600l with papertype filter; - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal -Tool clamping buttons on the headstockTool Clamping and Unclamping Buttons placed on the Headstock CoverAir coolant internal (through spindle centre)Air Coola ...

GeneralVertical Machining centre; Control: Control SIEMENS ERGOline IV CharacteristicsTable surface1400 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z1100/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 220 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwhAir coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low o ...

An NC bed milling machine DPM (Digital Precision Machine) with defective control is available. Travel X/Y/Z: approx. 800mm/430mm/600mm, table dimensions X/Y: 1270mm/255mm, spindle mount: R8/CAT40, speed: 5000rpm, spindle power: 2.2kW, max. table load: 340kg, rapid traverse: 2.54m/min. Dimensions X/Y/Z: approx. 2000mm/2600mm/2300mm, weight: approx. 2500kg. On-site inspection is possible.

Tool holder: MK 2 Drilling capacity in steel: 18 mm Rotational speeds of the drilling spindle per minute: 220/ 290/ 440/ 720/ 950/ 1450/ Weight: approx. 300 kg

Offer 25248 Specifications: - Drilling capacity in steel ST 60 45 mm - Drilling capacity in steel ST 60 55 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1600 rpm - Right - Counterclockwise rotation - 3 Feeds electr. Magnetic indentation 0.1; 0,16; 0.25 mm/rev - Projection 360 mm - Max distance drilling spindle – table / base plate 775 / 1255 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 2.7 / 4.0 kW - Space requirement approx. W 800 x H 2100 x D 980 mm - Weight approx. 750 kg - with: - Machine vise - Keyless chuck 1 - 13 mm - Emergency stop button -Lighting

FBM plastic extruder with Ø 120 mm spindle and underwater head cutting. Ideal for recycling and granulation lines. Brand: FBM (Falzoni) Model: ETF 120 V 380/5L Motor: 200 kW (270 hp) L/D ratio: 35 Underwater cutting (PRT, 2006) Includes: force-fed silo Extras: degasser and filter changer Year: 1988

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.

Condition: in working order, well-maintained Availability: immediately Connection voltage: 400 V Frequency: 50 Hz Power: 16.3 kW Current: 31.8 A

Key data: 50 mm, 335 mm, 280 mm

Power: 7.8 kW Weight: 1,650 kg Table size: 630 x 500 Speed: 45 - 1,000 rpm Machine is ready for operation and can be dispensed immediately.

Key data: 35 mm, 25 , 103 U/min

Used extruder 35mm - 25 l/d with 5.6 kW drive 3-zone auger 3 heating/cooling zones on the cylinder + 1 tool zone Mass pressure sensor 500 bar All machine cables designed to be plugged in Control cabinet with main switch, motor controller, mass pressure indicator and 4 pieces of temperature controller Function-tested

Cantilever rack for light loads, single-sided, frame height 2m, shelf length approx. 3m, 50cm deep arms, 200kg per arm, hot-dip galvanized - new product - : Price ex location incl. loading: only 895.-€ (net), plus packaging and freight. Price per additional stand: 225.-€ (net) Price for transport on request! Manufacturer: Bruckamp Year of manufacture: New Type: Super Lightweight Set components: 4 stands with 5 arms / 3 panels with connections Stand distance: approx. 1m Total length of construction area: approx. 3m Shelf height: 2m Foot and arm depth: 500mm Robust construction – made from an IPE 100 with firmly welded arms at a distance of approx. 330mm. Load capacity per stand: 1,000kg Payload per arm: 200kg Incl. ground anchor Incl. stress shield Description: 4 stands with 1 m axial dimension as a set incl. screws. Key benefits: Easy to assemble  ...

Offer 25234 Specifications: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Long spindle MK 3 - Drilling spindle speeds infinitely adjustable - Level 1 160 - 1125 rpm - Level 2 320 - 2250 rpm - Drilling spindle stroke 120 mm - Feeds 0.1 + 0.2 mm/rev - Projection 293 mm - Column diameter 115 mm - Table size 300 x 300 mm - With 2 T-slots 14 x 224 mm - Emergency stop button - Machine vise - 10 pcs HSS – drill bits 10 – 25 mm - Space requirement approx. W 500 x H 1750 x D 900 mm - Weight approx. 270 kg

Offer 24190 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 140 mm - 8 drilling spindle speeds 100 - 2900 rpm - Min. / max. distance drilling spindle / table 110 / 405 mm -Lighting - Keyless chuck - Coolant device - Machine vise - Machine base - Drive 400 V / 0.75 kW - Space required: W 400 x H 1250 x D 600 mm - Weight approx. 200 kg

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemTouch Probe Heidenhain TS 460Touch Probe HEIDENHAIN for workpiece measuring Option includes: - TS 460 Touch probe with optical signal transmission - measuring cycles - calibration ring - case for equipmentTouch probe Heidenhain TT160Touch Probe HEIDENHAIN for tool length and diameter measurement Option includes: - TT160 probe for tool measurement - measuring cycles with tool breakage monitoring - calibration tool Note: Additionally to ...

Roll width up to 320 mm and 620 mm., Unwind station for rolls up to ø750 mm., Shear cut knife system on knife shafts consisting of upper and lower knife., Variable speed drive up to 100 m/min., Rewind station for rolls up to ø500 mm., For light abrasive materials like micro-finishing films, tapes and other special qualities., Unwind station:, Unwind station for rolls up to ø750 mm., Unwinding with pneumatically expandable unwind shaft for cores with ø75 mm., Pneumatically adjustable unwind brake., Cutting system:, Shear cut knife system on knife shafts consisting of upper and lower knife for fast change of cutting width., Rewind station:, Rewind station for rolls up to ø500 mm., Rewinding with two pneumatically expandable rewind shafts for cores with ø75 mm and slots., Note: All information according to manufacturers description; no guarantee

CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minGeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 Spindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 80 barProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - EActive cooling systemActive cooling system for selected mechanical components in order to increase machine thermal stabilityAir coola ...

CINCINNATI PROTON 45-30G Attention: Machine in left-hand version Screw diameter: 45 mm, L/D = 30 Grooved catchment zone Motor (DC drive): 65 kW Screw speed: max. 320 rpm Tool zones: 4+1 for adapters Melt pressure & temperature sensor included EXcPRO-NT control incl. CAN bus for data communication Air conditioner for control cabinet Cylinder in bimetal design – condition: very good Screw with few operating hours – condition: very good Without material funnel & without adapter

Twin-screw extruder, corrotating, brand: OMC, type: EBV 31/32D, year: 2001. 31 mm Ø composable spindles. Book-type shirt. 11 Kw motor with water-cooled variator and wire head. Total installed power: 25 kw

Chip Conveyor, Chip Conveyor Belt, Coolant Cleaning, Chip Disposal, Scraper Conveyor, Scraper Conveyor, Chip Chain Conveyor, Hinge Belt Conveyor, Scraper Belt Conveyor – Subject to change – Manufacturer: RUEZ GmbH Type: Chip Conveyor, Scraper Conveyor Year of Make: 2002 TYPE: KF0WW2/306 DAS Conveyor belt width: 310 mm -Outlet height: 1300 mm -Total dimensions: L:4.370/W310/H1.820 mm -Total weight: approx. 800 kg Drive: Manufacturer: Getriebefabrik Cowig GmbH TYPE: SSMAH63 11-362.7 B3 TYPE: Worm Gear Specifications: Gear ratio(s2): 3.82 min-1. Torque (T): 337 Nm. Weight (m): 28 kg

Drilling capacity 32 mm Spindle mount MK 3 Projection 290 mm Pinol stroke 160 mm Table size 510 x 300 mm Column diameter 115 mm Spindle speed 55 - 1450 rpm infinitely variable Motor power 0.9 and 1.3 kW pole-switchable Mains connection 380 volts, 50 Hz. Spindle speed via 2 gear stages, 2 motor speeds and infinitely variable via variator gear Table height adjustment via hand crank Machine Light Keyless chuck 1 to 13 mm Space requirements L x W x H 1200 x 650 x 1900 mm Weight 400 kg

4 different sizes, from stock. Details on the photos. Manufacturer: INTERNOVI Type: PB350 Year of manufacture: 2014 Capacity: 12 m3 Goblet: 350mm - 7.4 liters One with discharge. Explosion-proof, stainless, low noise level. The price refers to 1 complete equipment. Current status: ready for delivery. The equipment is modular. It can also be used and assembled in other ways. Its dimensions can be changed, tailored to the task.

Spindle Holder MK 2 Drilling capacity in steel: 15.0 mm Stepless speed adjustment with digital display Digital depth display

Inv. Num. : 8602 Type: W 9 Producer: TOS Created: 1975 Parameters: Work table length: 950 mm Work table width: 950 mm Maximum weight of the workpiece: 3000 kg Spindle diameter: 90 mm Maximum spindle speed: 1800 1/min X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Machine weight: 11000 kg Equipment: DRO

Separator GEA Westfalia Type: MSE 100-06-177 Properties: Manufacturer: GEA Westfalia Type MSE 100-06-177 Machines No. 1731-518 Year of construction 2012 Engine power 37 kW Total height 2150 mm Width 1600 mm Length 2000 mm Description: The separator is a cleaning separator to remove solids from milk/juice, etc. No cream separator that separates skim milk and cream! Part 1/3 - Separator Dimensions: Width: 1,600 mm Length: 2,000 mm Height: 2,150 mm Part 2/3 Control cabinet Dimensions: Width: 800 mm Depth: 400 mm Height: 2,100 mm Part 3/3 Tools

Spindle mount MK 3 Drilling capacity in steel: 23 mm

CONVEYOR BELTS, for waste material and more, sturdy steel structure, constructed in a workman like manner, Italian quality and components, can be lined in PVC, RUBBER or SHUTTER TYPE BARS, Can be prepared and fitted for METAL DETECTORS, and completed with OVERBELT METAL SEPARATORS, Size and characteristics bespoke to the project., Just fill your enquiry with the following data:, - Materials to be transported (photos appreciated), - Quantity in Tons/h, - required working width, - total length, - horizontal length, - diagonal length, - heigh of discharging point, - if prepared for metal detecto, - if fitted with metal detector (in this case, please add maximum contamination size), - if positioned in covered/uncovered place, We will send you a most targeted offer.

Column Drill FLOTT 32 STG Year of Make: 1992 Drilling capacity in steel 32 mm Clamping surface table 500 mm x 360 mm Drilling depth adjustment with digital display Drilling depth 150 mm Spindle mount MK 3 Spindle speeds 140 rpm – 1400 rpm infinitely variable with digital display Drill Table Lighting

Make IXION Type: BST16 Drilling capacity in steel (diameter) 3 - 16 mm Clamping height max. 1500 mm Weight 300 kg Max. clamping height: 1,500 mm Machine weight: 300 kg Drilling capacity: for ST 60: 3.5 mm - 16 mm Ø for GG-20: 3 mm - 16 mm Ø

Offer 24320 Specifications: - Drilling capacity - in steel 13 mm - - in aluminium 15 mm - Drilling spindle holder MK 1 - Drilling depth 70 mm - Projection spindle / column 180 mm - 5 drilling spindle speeds 480 - 4000 rpm - Drive 400 V / 0.45 kW - Height adjustment Drilling table with T-slots 250 x 220 mm - Distance between drilling spindle / table approx. 270 mm - Machined base plate with T-slots 170 x 170 mm - Space requirement approx. W 400 x H 700 x D 500 mm - Weight approx. 100 kg - with keyless chuck 1 - 13 mm

Mazzoni high-performance guillotine type cutter with its own conveyor Dimensions: Mouth width 550 mm Conveyor width 1000 mm Conveyor belt width 600 mm Total length 3000 mm

Key data: 2 mm, 17

Twin screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine No.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx. 30 1/min. Worm torque: 10,000 Nm Motor power: 3.3 - 25.0 kW, Drive motor: Commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool Heating Zones: 8 Temperature control: 12 x digital temperature controller KS 40 (PMA) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tools) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material funnel and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hoppe ...

Key data: 28 mm, 300 mm

SerrMac Drill TCO 28 Manufacturer: SerrMac (Italy) Year of Make: 2002 Machine Type: Column Drill / Bench Drill Drilling diameter (max.): 28 mm Drilling depth: 150 mm Projection: 300 mm Spindle mount: Morse taper MK3 Speed ranges: 205–325–1050 / 410–650–2100 rpm (via belt drive, 2 gears) Table size: approx. 500 mm length Construction: solid cast construction Drive: Belt drive with manual feed control

SPECIFICATIONS: Installed power: 0.45 kW Voltage: 230 V Spindle speed: max. 2220 rpm CE

Pallet rack, yard, frame height approx. 3.50m to 4m, truss length: 2.70m, - used - : Price (net) from location: only 950 dismantled, packed and loaded: Manufacturer: Hofe Type: SL 25 / RTS 110 Year of Make: 2013 Frame height approx. 3.50m to 4m Frame width: approx. 10cm Truss height: approx. 10cm Frame bracing: screwed Frame depth: approx. 1.10m Number of frames: approx. 9 pieces Bay load: max. 1,600kg Shelf load: max. 1,440kg Field width: 2.70m Trusses: approx. 40 pieces Incl. push-through protection Condition: good Available: from approx. Mid-November Location: Egelsbach Area FFM

Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Be Ujvuzqzed Dvycelp Connection Load 90 kW

Merk: Leistritz AG Model: Micro 27/40 D Type schroef: Dubbele schroef Bouwjaar: 1993 Schroef Ø: 27 mm L/D-verhouding: 40 Werkuren: 2.466 Bws Ud Dvyju Aqdkocjw

Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Ble Ud Dvyovl Hzgocop Machine hours 104.599 hours Screw Diameter 35 mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000 kG

Deze extruder van Cincinnati staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 1999. Speciale opmerking: de extruder mist de versnellingsbak. Bj Usq Tr T Rod Dvycjlp – Merk: Cincinnati – Model: Titan 45R-APC – Bouwjaar: 1998 – Conische dubbele schroef extruder – Schroef Ø: 45 mm – Werkuren: 64.082

• One pair of original WEBER screws (excellent state, including measurement report • One pair of non-original screws Be Udowaxuae Dvycsww • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS-control • Output on PVC around 700 kg/hour

Key data: 72 mm

We can offer a W&P extruder. 75/36, year 2004, stopped, working condition.

Key data: 58 mm

We can offer a Toshiba extruder. 58/40, year 2010, stopped, working condition.

MD-0105 Twin Screw Extruder - Brand: MAPRE - Type: E.2.6.100.22 - Diameter: 100 - Uses 22 L/D - With dispenser - 74 KW motor - Variable speed drive - Electrical panel - With hopper with forced feeder

SPECIFICATIONS: Installed power: 0.55 kW Voltage: 230 V Spindle speed: 3200 rpm

for cutting machine 122 N:, Circular knife shaft complete with 91 knives - 2.8 mm cut,, Flat knife - holder without knife for 2.8 mm cut,, Round knife - shaft with nut, without knife,, Mincer shaft pitch 28 for 10 mm cubes - without knife, Complete list on request

Key data: 22 mm, 60

Single screw extruder 60 with renewed PMA control in 2010 - was replaced by double screw 5 years ago. Works after oil and belt change

Including attached clamping table 3000x2000x300 Auction-ID: A7-32339-9

Table dimensions: 3000 x 1280 mm Including attached clamping table 2000x1200x500 Auction-ID: A7-32339-7

Offered is a column drilling machine year of construction 1984, drive: VEM KPER 80 K 4, speed ranges: 3 step belt drive, spindle speed: approx. 1380rpm, quill stroke: approx. 120mm, MT2. Inspection is possible by appointment.