swiss typ used for sale

Column drilling machine with cross table Manufacturer: Helgerit / Perfect Type BF40VS Tool holder MK4 automatic feed Handwheel for fine feed Stageless speed control Digital rev counter 2 Pole motor 2 gear gearbox lighting Notaus Special price

Code 7418 Description 5 Spindle drilling machine Make Webo Modell B – 20 S/N Year 1975 Table 1740 x 360 mm Distance from centre of spindle to column 250 mm Spindle taper 2 MC Spindle stroke 190 mm Speeds 125 – 2000 rpm Motor 1,1 / 0,9 kW Volts 380 Volts Machine is in good condition.

Code 71095 Description Pillar drill Make WEBO Modell Gradua 50 Serial No. 053 12 5 Year Table ( turnable ) 620 x 600 mm Base 620 x 600 mm Drilling capacity ( Steel 60 ) 60 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1250 mm Spindle speeds 8 steps 56 – 1250 rpm Spindle feeds 8 steps 0,06 – 0,84 mm/rpm Weight 1000 kg Motor 4,0 / 3,3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Optie 4 spindle drillinghead ( Price € 1.000,- ) Condition Machine is in good condition

Code 99901 Description Pillar drill Make CABER Modell 58 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 40 mm Spindle quill 200 mm Spindle taper 4 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 90 - 1550 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Code 99902 Description Pillar drill Make CABER Modell 59 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 50 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 65 - 1150 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Electric motor AEG type 1LA6 1864AA71 Year of construction 1987 22kw Price 250€ net

Webo in-line drilling machine - 2 machines: speed 90 - 1000 1/min. - 4 machines: speed 4000 - 6000 1/min. - Coolant device - Tool holder: MK2 - Width: 200 cm - Height: 200 cm - Depth: 100 cm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

We can offer 2 twin screw extrusion compoundibg lines,manufactured in 2015 diameter 75mm, L/d 40. water circle pellitzer.drive motor power 160kw.short time working, very good condition.Serious buyers contact us. We have many brands and models machines, tell me what you need seriously!

Extraction Fuchs TKFVA103 (filter in OEM quality) MA-105895-E Filter Activated Carbon TKFVA103 MA-105896-E Filter Cartridge FIPA

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

- Infinitely variable speed control - Quickly adjustable drilling depth stop - Thread cutting device - Undervoltage triggers - Table height adjustment via rack - LED lighting in the head - Continuous/normal drilling capacity R1: 23/25 mm - Thread cutting performance (depending on slope) R1: max.M 16x1 - Spindle MK II - Drilling depth 100 mm - Projection 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): number 2, distance 125 mm - Speed display digital - Drilling depth display digital - Drill depth stop quickly adjustable - Feed by hand - Motor three-phase current 400 V - Spindle speeds infinitely variable R1 with 20-2,000 1/min Option: Coolant device: € 525,- FACTORY WARRANTY: 3 years DELIVERY: free domicile incl. packaging NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FAS ...

The shuttles were used until October 2021. Maintenance by the in-house technicians and Knapp is carried out regularly. The shuttles are neatly stored and can be called up at any time. There were originally over 70 shuttles in use. Just ask how many are still available. Containers of the sizes 60x40 cm and 40x30cm were used. It could be stored up to four times deep.

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Screw Ø: 2x 67 mm L/D: 34:1 Motor: 97.5 kW (DC)

Standard equipment - Thread cutting device - Control panel with OLED display - robust, high-quality drill head hood - LED lighting - quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with CEE plug - mechanical feed of the Z-axis - incl. electromagnetic coupling for 3 feed speeds - Drill cross with push button - in thread cutting mode: right-left SPECIFICATIONS Continuous/normal drilling performance (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Projection: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Speed display digit ...

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Siemens Simatic OP17 controller Screw Ø: 2x 75 mm L/D: 36:1 Motor: 143 kW (DC)

Tray sealer few operating hours with shell storage shell size: 350 x 350 mm Top foil: Max. 420 mm Power 6 to 15 cycles / minute Delivery time: 2..3 weeks

Mixer Falterbaum Typ Famix 20000 Capacity: 20.000 ltr./h year of manufaturing: 1992 with Bran & Lübbe dosing pump incl. switch board The machine is mounted on a stainless steel base plate

pdf attached

Iberdrill Gear Column Drill Series T, TL25 drilling capacity for steel (ST 60) at continuous power S1: D25mm drilling capacity for grey cast iron (GG 20) with continuous power S1: D30mm thread cutting capacity for steel (ST 60) with continuous power S1: M 18 thread cutting capacity for grey cast iron (GG 20) with continuous power S1: M 22 Tool holder in the spindle: MK 3 spindle stroke (drilling depth): 120 mm Motor power spindle: 0.82/1.2 kW Drive: 8-speed gearbox with pole-shiftable motor Speed adjustment: manual Speed range for 50 Hz motor, n=1,500/3,000 rpm, pole switchable 65 -125 -185 - 365 - 540 - 1,055 - 1,560 - 3,060 rpm Feed: 300 mm x 270 mm Column diameter: 100 mm Distance spindle center / column (projection) 250 mm Machine weight (net) 250kg Gross weight 310kg Dimensions transport packaging (LxWxH) 2.14m x 0.6m x 0.8m Gearbox ...

Specifications Model: 25 lpv Tool holder: MK3 Pinole stroke: 110mm Projection: 400mm Drive: 3 phase motor with 2 motor stages and V-belt drive Speeds 14 / 35 – 65 – 70 – 125 – 130 – 200 – 250 – 335 – 400 – 570 - 670 – 1140 – 990 – 1980 rpm Table dimensions: LxW 330x330mm Machine dimensions: LxWxH 410x700x1830mm On the machine, we installed a new motor and renewed the entire electrical system with the step and motor circuit breaker as well as the cables.

Webo BR 35 V / 1250 Radial Drill Workspace Delete. v Spindle to stand smallest 280 mm / largest 1250 mm Delete. v Spindle or drill. b. Table top smallest 0 mm / largest 900 mm Delete. v Spindle to base plate smallest 200 mm / largest 1400 mm Diameter of the drill smallest 860mm / largest 2800 mm Swivel range 2,200mm / clamping diameter approx. 240mm Aufspannfl. upper 650 x 500 mm / side 770 x 500 mm Drilling spindle 40/85 ⌀ mm Speed 30 - 1800 rpm Year of construction 1971 Further technical data can be found on the machine map Item condition: used, impeccably and top maintained. Action components: Only the Webo BR 35 V / 1250 without the shown reversible clamp, this can be done individually or as a combination offer in our other Auction can be purchased. Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loadin ...

- Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with Schuko plug SPECIFICATIONS - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column Ø: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: Digital - Drilling depth display: Digital - Feed (mm/revolution): by hand - Spindle speeds infinitely variable: 60 – 6,000 1/min - Continuous/normal drilling capacity: 10/12 mm - Thread cutting performance (depending on slope): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION Drilling package (No. 296570) Machine vice Flott [felix] 80 and quick-release drill c ...

Standard equipment: robust, high-quality and inclined rotary hood for easy reading of the speed LED lighting quickly adjustable and ergonomic drilling depth stop infinitely variable speed control Connection cable with SCHUCO plug (1.2 m) Undervoltage outlets Drilling protection with electr. Hedge thermal overload protection Emergency Stop Impact Button Weight in kg: 44 Motor kW: 0,45 AC 230 V Speed 1/min: 250-3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminium Ø 20 mm - Softwood Ø 40 mm - Drilling depth 60 mm - Projection 220 mm - Saeulen diameter 70 mm - usable table area (W x L) 300 x 250 mm - T-groove size number 2, distance 100 mm Dimensions width 14/26 mm - Spindle B 16 - Speed display digital - Drilling depth display: scale - Drill depth stop: quickly adjustable stop ring - Feed: by hand - FACTORY WARRANTY: 3 years - free domicile incl. packa ...

Spindle speed infinitely variable electronic 40-4000 1/min Spindle: MK 2 Table height adjustment with rack Thread cutting performance max M12 Setting the thread cutting depth via digital depth display digital speed display digital drilling depth display Drilling depth stop via stop ring Feed / by hand Table height adjustment with rack Continuous/normal drilling capacity steel Ø 15 mm / 18 mm Drilling depth 70 mm Projection 220 mm Mouth diameter 70 mm Usable table area (W x L) 300x250 mm Machine dimensions (W x D x H) 420x520x850 mm Weight 65 kg max distance spindle/table/foot 300/ 370/ 420 mm Motor AC with frequency converter 230 V , 0.54 kW OPTION Drilling package B16 (No. 296570) - Vice felix 80 - Quick-release drill chuck 1-13 mm Price: € 539,- Factory warranty: 3 years Free domicile including packaging (Germany only) Delivery time: immediately from ...

Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of construction: 1990 Machine no.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outdoor clearing Pulling force: 25.000kg Cutting speed: 7.2 / 8.1 / 9.6m/min Maximum tool length: 3520mm Passage width: 520mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12.300 x 6.400 x 4650mm Power Supply: 380V 50Hz/110kW Accessories/ Special equipment: - 6 tool carriers for tool change - Machine documentation Remark / General The machines are in good condition. The machines are dismantled with us in the Bearing. The total volume of the plant comprises several trucks (approx. 70 tons per machine). The machines have produced connecting rods for passenger car diesel engines. Chain scrapers are designed for use in mass production. The continuous ( ...

see PDF attached

Continuous/standard drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Projection (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display digital Digital drilling depth display Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase current 400V with frequency converter (kW) 1.5 Spindle/work surface distance (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED li ...

Dear customers currently we offer you a refurbished columns or column drilling machine from F. Zimmermann for sale. The special feature of the machine is the work table adjustable in 3 levels. Here are the other technical data of the machine: Speeds: 100 - 2,250 rpm Work light MK3 recording (new) Swivel radial: 360° Swivel axisial: 2x 90° Quill stroke: 160 mm Projection column spindle center: 500mm Table: 490 x 400 mm Centering disc Ø: 55 mm H7 working height swivel table: 715 mm working height base plate: 1,215 mm Base plate and table with T-slot 12 mm Dimensions: 600 x 1,120 x 1,930 mm Power: 1.5 kW Weight: approx. 500 kg After the overhaul, the machine has a completely new electrical system including engine brake, is painted light grey in RAL 7035 and comes with a drill set. We look forward to your questions and inquiries! If you have any questions, please ...

For sale is a used cantilever rack Ohra. Condition very good. Columns H8140mm two-sided - 5 pieces load capacity stand 11360kg per side Level: feet + 10 Cantilever = 1200mm IPE 140 (load capacity 1420 kg) Price 10.500 € net Delivery possible throughout Europe. Available 24 stands and 400 cantilever arms If you are interested, please contact +48601553406 or biuroregalux.pl

Key data: 130

Extruder 1 spindle : 130 mm Ø, 35 L / D, for grancear plastics, brand: Plasco, with forced feeding. Degasser, with vacuum pump: 15 hp. Filter changer: 260 mm, overhead cut to water. Vibrating screen and motor: 238 KW with variable speed drive and electrical panel. GT-2982

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...

Key data: 50

Extruder 2 spindles: 50 mm Ø 12 L/D, motor: 4.5 kw, without electrical panel.

Key data: 120

Extruder 1 spindle for manufacture of pellets. 120 mm Ø, 35 L/D, brand name: FBM ( Falzoni), type: ETF 120 V 380/5L, year: 1988. Engine: 200 KW. Degasifier and filter changer. Head cut under water, year: 2006, brand: PRT and force-feeding silo.

Extruder 2 spindles 18L/D, model: BK-50-93, tapered spindles, brand: Volcano, with motor: 25hp, with variable speed drive. Degasser and dispenser of material and electrical panel.

Key data: 50

Extruder 2 corrotating spindles: 50 mm Ø, 40 L/D, brand: ICMA SAN Giorgio, with double degasser. Motor: 57.5 Kw direct current with drive. Material dispenser and thread head (spaghetti), with electrical panel.

Key data: 60

Extruder 1 spindle: 60 mm Ø 32 L/D, Amut brand, variable speed motor Elektra Faurndau: 7 to 24 KW, with electrical panel and wire head for pellets: 23 holes and electrical panel.

Key data: 120

Extruder 1 spindle : 120 mm Ø 35 L/D, make: Union, motor: 110 Kw (150 hp). 4.2 m. long. With degasser, filter changer: 220 mm, overhead cutting to the water with centrifuge and screen. Electrical panel with variable speed drive.

Key data: 120

Extruder 1 spindle: 120 mm Ø, 35L/D, brand: Union, with degasser, hydraulic filter changer: 150. Year: 1987.

Key data: 90

Extruder 1 spindle Brand: Eurotecno, 90 mm Ø, 33 L/D. Electrical panel, filter changer: 160 mm, wire head for graining, stainless bathtub: 3 m, without motor. Eurotecno noodle model G-400 with blades: 300 mm.

Key data: 65

Extruder 2 corrotating spindles: 65 mm Ø, 30L/D, brand: Maris, model: TM-65 V. Shirt and spindle compatible by segments. Degasser, motor: 90 KW DC, with variable speed. Thread head and 2 spare spindles.

Key data: 60

Extruder 1 spindle: 60 mm Ø, 25 L/D, brand: Safinio, motor: 20 hp, variable speed drive, brand: Omron, model: F7, alternating current: 30 kw and electrical panel.

Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal.  ...

offer 22326 Specifications: - Drilling capacity in steel ST 60 35 mm - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 170 mm - Projection 345 mm - Rotary table with 2 T-slots 550 mm - distance table – drilling spindle 650 mm - distance base plate – drilling spindle 1000 mm - Feed rates 0.09 - 0.16 - 0.28 mm/rev - AZ transmission continuously variable with manual transmission - Drilling spindle speeds infinitely adjustable 40 - 720 rpm -Right. - Left-hand rotation - Drive 400 V / 2.5 kW -Lighting - Coolant device - Space requirement approx. W 750 x H 1950 x D 1000 mm - Weight approx. 700 kg

offer 22054 Specifications: - Drilling capacity - in steel 15 mm - - in aluminium 18 mm - Drilling spindle holder MK 2 - Drilling depth 70 mm - Projection spindle / column 180 mm - Drilling spindle speeds 80 - 4000 rpm - Drive 400 V 0.45 / 0.75 kW - height-adjustable drilling table 280 x 240 mm - Distance drilling spindle / table approx. 360 mm - Distance drilling spindle / base plate approx. 410 mm - Space requirement approx. W 280 x H 1700 x D 600 mm - Weight approx. 85 kg - with : - Quick-change drill chuck 1 - 13 mm - Machine vice - div. Gebr. HSS drill 5 - 15 mm

in very good working condition

Drilling capacity steel/GG: 18/23 mm Spindle mount: 2 MK Projection: 250 mm Table size: 250 x 370 mm Spindle speeds: 400 - 5000 rpm Drive motor: 0.48/0.6 kW Space requirements: 750 x 500 x 1670 mm Weight: 130 kg

Manufacturer | Manufacturer: Chemnitzer Maschinenbau GmbH Chemnitz Type | Type: CMB 16 Pinole Lift | Quill stroke: 120 mm Speed (infinitely variable) | speed (stepless): 460 - 1840 rpm ; 140 - 560 rpm Dimensions table | Table dimensions: 280 x 360 mm Adjustment range table | Adjustment travel table: 540 mm Recording | Holder: MK 2 Connected load | Connection Value: 0.8 kW Total weight | Total Weight: 350 kg

Box column drill Alzstar 40S 16 A 380 V Speed 160 - 2250 rpm Length 1 m Width 0.80 m Height 1.80 m Weight 270 kg Work lamp Color: White

Single screw Extruder Theysohn 63mm

NEW ex works Standard equipment - Threading device - Control panel with OLED display - Robust, high-quality drill head hood - LED lighting - Quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drill protection with electr. Hedge - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drill cross with push button - in tapping mode: right-left SPECIFICATIONS Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Thread cutting capacity max.: R1= M30x3,5 / R2= M24x3 / R3= M36x4 Spindle MK IV Drilling depth: 160 mm Projection: 300 mm Column diameter: 140 mm Usable table area (W x D): 590 x 450 mm Digital speed display Digital drilling depth  ...