sw used for sale

Number of spindles: 5 St. Working width: 230 mm Working height: 160 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min. Control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ------------------------------- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carriage motorized adjustment TECHNICAL DATA in Detail ------------------------------- Working width (for tool diameter 125-163 mm): 15-230 mm Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter  ...

workpiece diameter: 600 mm workpiece weight: 400 kg workpiece height: 300 mm total power requirement: 35 kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 250 - 1250 mm grinding wheel diameter: 250 mm total power requirement: 3,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 850 x 1000 x 1800 mm Circular saw blade sharpening machine for sharpening medium to coarse metal saw blades Saw blade diameter Cold circular saws : 250 - 1250 mm Hot circular saws : 900 - 1700 mm Tooth pitch up to : 42 mm Grinding wheel double height : 25, 37, 50, 75 and 100 Grinding wheel revolutions : 2000 and 2500 rpm Grinding wheel diameter : 250 mm Pre-cutting tooth can be chamfered on both sides : up to 45 degrees Cutting edge geometry for hot circular saws : = -4 degrees Weight of the machine : 1000 kg external dimensions : 850 x 1000 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 5 St. Working width: 250 mm Working height: 160 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min. control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ------------------------------- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ------------------------------- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm Th ...

Age 2000, Lower Form Table upgraded recently by Gabler to be able to run PET products, original closing force was 75kN, upgraded to 115kN. i.e. the Thermoformer can now work with PET, PP, PS, HIPS etc., Hours run only 37,500 hrs!, Preheater ILLIG VHW 72, 2-Roll Preheater for PP, Gabler SWING Thermoformer:, Max. sheet width 480 mm, Double Heating Oven, Max. Form Area 450 x 220 mm, Max. depth of draw 125 mm, Stacker / Counter, Delivery conveyor for Counted Products, Inline Skeletal Waste Material Winder, Max. Dry Cycle speed 44 cycles/ min., Machine is well maintained and in v. good production condition, Inclusive of:, 1 Bosch Sprang 6 cavity Ø75 PP cup tool, age 2000 with Stacker Parts, The mold is very sparingly used and in great condition., Film width: 480 mm, Form Area: 450 x 220 mm, draw: 125 mm

A total of four WMW/Werkö saw grinding machines are available. Saw blade diameter min./max.: 250mm/1450mm, grinding wheel diameter: 250mm, speed: 2500rpm, tooth pitch: 42mm, grinding spindle swivel range: +/-45°, machine dimensions X/Y/Z: approx. 850mm/1000mm/1800mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible.

Yamato ADW 514 multihead weigher, MHW : Yamato Sigma 514SV, Ingress Protection: :IP65, Weighing capacity : 20 - 2000 grams per dump, Weighing volume : max. 5 liter per dump, Configuration Details:, Machine completely built in 304 Stainless steel., TC : 15 degrees, vibratory type, LFP’s : Sigma Type, Feed Buckets : Double door opening, Bucket volume : > 2,5 liter, Weigh Buckets : Double door opening, Bucket volume : > 2.5 liter, Collating chutes : 60 degrees, HMI : RCU810 color touch screen, The model comes with a newer upgraded RCU (control panel)., MHW: Yamato Sigma 514SV, HMI: RCU810 color touch screen, Bucket volume: > 2.5 liter

Sweeper Maguire - Unloading System Description: Big bag and octabin unloading station All offered peripherals are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Aircooled chiller PANASONIC ECO i W SW N EVO P SWVN0660CA 644 kW Cooling capacity: 644 kW / 183.12 tons (12/7 — 35°C) Year of manufacture: 2024 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer CSH8593-140Y-40D (screw) + 1 pcs. Bitzer CSVH24-125Y-40A (screw, inverter) Type of refrigerant: R513a Number of fans: 14 pcs. (EC-fans) Dimensions: 7.8x2.2x2.5 m. Weight: 5620 kg. Working hours: 0/0 h. Condition: New

Industrial plate heat exchanger, B57Hx110/1P-SC-S, SWEP, used-function assurance Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Technical data: - The plate heat exchanger has cooled a HFC mixture with water. - We have checked the flow rate of the heat exchanger, it is in very good condition. - Plate heat exchanger, SWEP, B57Hx110/1P-SC-S, 4xSAE 2 1/2"cs Heat exchanger 693 x 243 mm, 110 plates, stainless steel/copper, Volume 2 x 18 L, max 18/32 bar, original price approx. €3,900. Sales price € 1,200. The required capacity of the heat exchanger depends on the temperature difference, the flow rate, the viscosity and many other factors. Due to its size and number of plates, the  ...

grinding length: 600 mm grinding width: 320 mm workpiece height: 525 mm surface area: 600 x 300 mm magnetic plate: 600 x 300 mm weight of the machine ca.: 2 t dimensions of the machine ca.: 2600 x 1500 x 2000 m total power requirement: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 used ELB SURFACE GRINDER Model: SWBE 010 NPC-K Grinding area: 1000 X 550 X 400 mm Year of Make: 1988 Grinding wheel:  400 X100 X 127 mm ACCESSORIES Electric straight-line dresser with compensation Electro-Permian Magnetic Clamping Plate 1000 X 400 mm (SAV) Magnetic adhesive force control Universal Paper Belt Filter Grinding wheel with holder

An ELB cycle-controlled surface grinding machine is available. Grinding length: 600mm, grinding width: 375mm, max. workpiece height: 375mm, magnetic clamping plate dimensions X/Y: 1000mm/375mm, table travel: 525mm, table speed: 30m/min, max. table load: 300kg. Machine dimensions X/Y/Z: approx. 2550mm/2050mm/2500mm, weight: approx. 4000kg. Including a coolant unit. st möglich.

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Albright/Elektron, relay contactor -Type: SW201-3 -Voltage: 48 V -Number: 5x contactors available -Price: per piece -Dimensions: 155/75/H80 mm -Weight: 1.5 kg/pc.

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Albright, relay contactor -Type: SW180-106 -Voltage: 24 V -Number: 3x contactors available -Price: per piece -Dimensions: 122/60/H45 mm -Weight: 0.6 kg/pc.

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Albright, relay contactor -Type: SW180B-3 -Voltage: 24 V -Number: 9x contactors available -Price: per piece -Dimensions: 122/60/H45 mm -Weight: 0.7 kg/pc.

We sell 500 x this package 1 x Huawei 5735-L12T4S-A Switch 12P (98010918) and 1 x Huawei S57XX-L Series Basic SW, per Dev (88035YSM) These are brand-new systems in unopened boxes, with original manufacturers warranty, EU systems In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya,  ...

; Gross weight [kg]: 270; Maximum lift capacity [kg]: 240

Milling machine - Milling machine Reiden FU100 with digital display Manufacturer : Reiden – Made in Switzerland Model : FU 100 Year of construction : 1987 conventional Control unit - with digital display The machine runs cleanly and precisely Clamping surface approx.: 1100x300mm Longitudinal travel: 700mm Traverse: 250 Vertical travel: 470 Adjustment range milling head: 400mm Pick-up cone: ISO40 Spindle speeds: 45-2000rpm 12 milling feeds longitudinal and transverse: 18-800mm/min 12 Vertical: 7.2-320mm/min -Rapid traverse -Swivelling milling head - incl. various accessories - WITHOUT vise The manufacturer Reiden Technik AG still offers service and spare parts for this machine. The machine comes from the first owner, from a German company. Accessories: according to photos Machine weight approx. [weight]: 2 t Dimensions approx. [size machine]: 150x150x150cm Full d ...

E-chain hoist, electric hoist, crane GIS/SWF type 150 / FFabr. No: 15739 Year of construction 1970Load capacity 1500 kgHook travel 4.5 metersMain lifting speed 4 m/min. Fine lifting speed 1 m/min.- Electric carriage with a speed for double T-beams- 2 load trainsGood condition; used

TASKI Swingobot 2000 Autonomous Scrubber Dryer Manufacturer: TASKI / Diversey Model: Swingobot 2000 Type: COR2000 Machine Type: Autonomous Scrubber Dryer Condition: used, fully operational Operating hours: approx. 38 h Serial Number: 7524396000434 Operating voltage: 24 V DC Power consumption: 1500 W Net weight: 471 kg Working width: 700 mm Suction bar width: 900 mm Fresh water tank: 90 l Runtime: up to 4 hours Theoretical area output: up to 1,260 m²/h Degree of protection: IPX3 Operation: autonomous or manual Navigation system: LIDAR and sensor system Touchscreen control panel Emergency stop switch Location: Teningen-Nimburg

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, segment jaws -Manufacturer: Schunk, soft attachment jaws, 4 sets = 12 pieces -Type: SWB-200 -Dimensions: see photo technical drawing -Submission/Price: complete -Transport dimensions: 240/180/H60 mm -Weight: 16.3 kg

Rated current (A): 4000, Poles: 4; Gross weight [kg]: 99; Accessories: Multiple breakers in stock!, NEW/UNUSED

Height=0.92 m, Overall length= 0.7 m, Overall width= 1 m, Net weight= 130 kg,

Yamato 714 Multihead Weigher, Fully Stainless Steel | Rigidized | Optional RCU810A Upgrade | Deep-Freeze Ready, Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments., Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables., The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation., ---------------------------------------------------------------, Specifications – Yamato 714, Weighing Heads - 14 heads, Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible, Speed - Up to 90 weighings per minute (product dependent), Chute Type - Flat chutes (ideal for frozen/ha ...

Vacuum cutter Alpina Swopper Sw V 330 S

Euchner STA3A-2131A024M Safety switch

Grinding dimensions X/Y/Z: 500mm/300mm/350mm, grinding wheel dimensions X/Y/Z: 300mm/50mm/76.2mm, magnetic table dimensions X/Y: 500mm/200mm, pole pitch: 5mm, machine dimensions X/Y/Z: approx. 3050mm/1600mm/2400mm, weight: approx. 3000kg. Including coolant system, paper band filter, sine table, digital display, and grinding wheel flange. Documentation available. An on-site inspection is possible.

Size: 800 x 1200 mm Equipments: Good condition without any damage Maximum stacking height: 1350 mm Minimum stacking height: 650 mm Platform width: 1250 mm

This is a swissQprint Nyala LED, which is a high-end, industrial-grade UV flatbed/hybrid digital printer manufactured in Switzerland. Find more here - / Contact us at -

Elb SWE 6 VA II Worklenth without magnetic table: 600 mm Grindingwidth: 400 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 400 mm Travel Z-axis (autom.): 450 mm Dimensions of the table: 1100 x 450 mm Dimensions magnetic table : 700 x 200 mm Max dia grindingstone: 300x50x76 mm Spindlespeeds: 1400 x 1800 rpm Motorpower: 5.5 kW, total 13 kW Tension needed: 400V

Weber Waagenbau u. Wägeelektronik, Automatic scale for weighing, year of construction 1989, with Weber control Dialog 165V-SWA, year of construction 2001, max. 2.5 kg, used, Can be viewed on site beforehand,

New mobile dental unit reversed including with new demountable chair type DENTA-COMP PREMIUM MAKER BPR DENTAL MOBILILLITY BPR SWISS Perfect machinery international whatsapp +31 653549259 The Netherland whatsapp +34 682511830 Spain

General SKUR1413 LocationBarneveld CEcheck MakeFrewitt Main Features MaterialStainless steel Motor0.37 KW Inlet diameter300 mm Specified Features - Metering screw MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Metering screws With hoppercheck Capacity195 Ltr. Hopper sizesdia. 600x1200 mm Inletdia. 300 mm Outletdia. 150 mm With breaking/mixing shaft16 rpm Motor0,37 kW 230 Volt Information TypeProFi-Dos, ProFi-Sword No.5921810812 Year of construction2007 Floorspace0,9x1 m Total height2,1 m Weight250 kg Extra SpecificationsSurface quality: Ra≤0.8 μm The ProFi-Sword module is a discharge system which fluidzes powder, providing good flow behavior and preventing bridge formation. : Metering screwsFrewitt FribourgDosing units > Metering screwsBrand > Frewitt Fribourg What you can expect from Foeth: -- Machine is in working condition -- At a reduced  ...

General SKUR1412 LocationBarneveld CEcheck MakeFrewitt Main Features MaterialStainless steel Motor0.37 KW Inlet diameter260 mm Specified Features - Metering screw MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Metering screws With hoppercheck Capacity120 Ltr. Hopper sizesdia. 600x800 mm Inletdia. 260 mm Outletdia. 300 mm With breaking/mixing shaft16 rpm Motor0,37 kW 230 Volt Information TypeProFi-Dos, ProFi-Sword No.5921810811 Year of construction2007 Floorspace0,9x1 m Weight250 kg Extra SpecificationsSurface quality: Ra≤0.8 μm The ProFi-Sword module is a discharge system which fluidzes powder, providing good flow behavior and preventing bridge formation. : Metering screwsFrewitt FribourgDosing units > Metering screwsBrand > Frewitt Fribourg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ne ...

Engine Brand: SWEDIC, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: Mechanical Fuelpump , Generator KVA: 10.5 , Generator Hz: 50 , Generator Volts: 230/400 , Generator Amps: 13.5 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/swedic-sw-11500-generator-10kv a-new/8, , = More information =, , Empty weight: 205 kg, Type number: SW-11500 GENERATOR 10KVA

Omron Guard Lock Safety Door Switch D4NL - 2DFA - BS

Two gravimetric belt weighfeeders K-Tron are available. Load cell measuring range: 60N, belt width: 300mm, throughput: 650kg/h, max. grain size: 10mm. Machine dimensions X/Y/Z: approx. 1400mm/750mm/450mm, weight: approx. 150kg. The machine control was overhauled recently. Documentation available. An on-site inspection is possible.

Offered is an incomplete returnable glass filling and packaging line consisting of the following machines and units: Unloader: Kettner, crate washer: Bohrer, insert screens, 1x zone, 2 inverters, unpacker: Kettner Blitzpac A35 T1 year 2002, unscrewer: Adelski, cleaning machine: Krones Einend KESK year 1994, approx. 19.303h, EBI inspection machine: Heuft Spectrum Inline IR year approx. 2015, filler: Cobert, 60 filling stations, approx. 15,000 bottles/h at 1.0l, 1 pc. SV 10-digit, 2 pcs. KK 10-digit, twist-off capper: SWC year 2008, cooler: NIKO 091 26-110-100 year 2015, temperature control: approx. 85°C - 30°C, labelling machine: Krones Prontomatic K090-A43, body, front and back labelling, dating: Markem Image, loader: Kettner Bojok, Born Binder. Processable containers/formats: bottles 0.2l/30-case, 0.25l (RW), 0.5l/24-case, 0.7l juice bottle, 0.75l (EW), 1l VdF/6-case/12-case, crates/f ...

Fully automatic filling line for buckets 2-5 kg. Incl. palletizing robot and wrapper.

Yamato 714 Multihead Weigher, Fully Stainless Steel | Rigidized |, Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments., Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables or flat chutes for frozen products., The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation., ---------------------------------------------------------------, Specifications – Yamato 714, Weighing Heads - 14 heads, Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible, Speed - Up to 90 weighings per minute (product dependent), Chute Type - Flat chutes (ideal for frozen/hard product ...

A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

Laminator with oil calender (resistance heating) Max format: 1050x820 mm Min format: 300 x 300 mm Weights: 105-500 gsm

Platform width: 900 mm Platform depth: 625 mm Load capacity: 500 kg Max. sheet size: 600 × 750 mm Max. stack height: 1200 mm Min. stack height: 540 mm - with airing

Factory liquidation mask production. Installation 2021, out of service since March 2022. The systems have already been dismantled and ready for delivery. Stationary industrial vacuum cleaner Power 2.2 KW Air flow rate 300 m/min Suction port 40/50 mm Weight 30 kg

Key data: 600 mm, 600 mm

Manufacturer: ELB-SCHLIFF Model: SWR 50 T Refurbished: 2008 Shipping time: immediately Grinding area: Ø 600 X 300 mm Grinding wheels: max. Ø 400 X 100 x 127 mm Spindle cone: 60 mm Dimensions set-up: approx. 2800 X 2800 X 2300 mm L/W/H Total weight: approx. 5000 kg Control: Siemens PLC