129,495 used machines on RESALE, but how to find them? Machine Search
round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting range: 90°: 90 mm cutting range: 45°: 75 mm Saw blade diameter: 315 mm Table dimensions: 800 x 500/400 mm Saw blade: 30 mm machine weight ab.: 45 kg dimensions: 850 x 600 x 430 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 12 mm distance between columns: 3260 mm back stop - adjustable: 3 - 1250 mm power capacity: 37 kW voltage: 400 V weight of the machine ca.: ca. 14 t dimensions of the machine ca.: 4,00 x 4,00 x 2,20 m CNC-controlled plate shear www.kefischer.de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 370 mm cutting range round: 115 mm cutting range square: 105 mm cutting length min.: 730 mm cutting range flat: 70 x 240 mm cutting lenght max.: 4000 mm saw blade turning speeds: 1250 / 2500 U/min table rotating: 180 ° stroke: 120 mm feed stepless: 0 - 500 mm/min coolant: capacity 45 degrees: square: 95 mm capacity 45 degrees: flat: 50 x 200 mm cutting speed: 1250 / 2500 m/min weight of the machine ca.: 1,1 t dimensions of the machine ca.: 5,00 x 1,30 x 2,00 m - Fabr. - No.: 28232 und 28233 - pneunatic clamping head - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 300 mm width: 150 mm height: 90 mm voltage: 24 V weight of the machine ca.: t dimensions of the machine ca.: m Power connection 24V / 2,8 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 315 mm cutting diameter: 85 mm stroke: mm mitter cutting - all-position: ± 45 ° turning speed range: 19 / 38 1/min power requirement: 0,75 / 1,5 kW coolant: voltage: 400 V total power requirement: 1,5 kW weight of the machine ca.: 235 kg dimensions of the machine ca.: 0,55 x 0,90 x 1,75 m - Coolant device - Machine base - without circular saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Corundum disc mill Manufacturer: FrymaKoruma Type: MK-360/B Item #: 101031 Year of construction: 2007 Power: 45 kW Pressure product space: 4/3 bar Pressure double jacket: 6 bar Weight: 670 kg new grinding discs installed with control cabinet with double-acting mechanical seal various spare parts LBH: Mill: 1150 x 650 x 600 mm Control cabinet (large): 1000 x 290 x 1220 mm Control cabinet (small): 400 x 300 x 200 mm
For sale:Micro Motion MASS flow sensor Type: CMF 200 ANSI 300 LBS Exclusive channel Order number: 8000.3 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.
capacity 90 degrees: round: 350 mm capacity 90 degrees: square: 350 mm dimensions of saw-band: 4640x34,1,1 mm : 355 mm sawband speed: 15-115 m/min weight of the machine ca.: 2800 kg dimensions of the machine ca.: 3050x2190x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Order number: SK 3384.500 Design: Roof structure Product Energy-efficient Blue e rooftop air conditioners with integrated e-Comfort controller and electric condensate evaporation as standard. Advantages Can be networked with e-Comfort Controller with IoT interface via Blue e IoT adapter from 500 W cooling capacity Material: Sheet steel Colour: RAL 7035 Scope of delivery: - Condenser with hydrophobic RiNano coating - Integrated electrical condensate evaporation - Completely wired, ready for connection (plug-in terminal block) -Drilling jig - Mounting material Total cooling capacity according to DIN EN 14511: Cooling capacity L35 L35/50 Hz: 1.6 kW Cooling capacity L35 L35/60 Hz: 1.75 kW Cooling capacity L35 L50/50 Hz: 1.15 kW Cooling capacity L35 L50/60 Hz: 1.21 kW Rated operating voltage: 230 V, 1~, 50 Hz/60 Hz Hint: The 3273.500 roof-mounted air conditioner is also ...
Engine serial nr.: NYJ00480, Generator set serial nr.: K7F00641, Generator serial nr.: 74B0080; Gross weight [kg]: 16080; Engine: Caterpillar 3516B; Accessories: Control Panel
PRESSURE GAUGE DENKI” DK-1-3X2-1/2PT
danfoss pressure transmitter mbs 3000
: 0600 mm : 300 mm : 382 mm : 700x340 mm : 355x38x127 mm : 1500 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0600 mm : 300 mm : 382 mm : 700x340 mm : 355x38x127 mm : 2400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 610 mm grinding length: 3000 mm centre height: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310015 Type of machine Cylindric grinder Make STANKO Type 3M193/149 Build in 1988 Max. grinding diameter 610 Max. grinding length 3000 Grinding wheel diameter 700 Grinding wheel widht 75 Total Power (KW) 30 Additional information Incl. 2 staedys The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 1400 mm grinding length: 3500 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310013 Type of machine Super finishing machine Make NAXOS UNION Type WT 140/3500 Build in 1975 Max. grinding diameter 1400 mm Max. grinding length 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Robot SEPRO en bon état Référence : S900-II type 3041 BZ Année 2002
sheet width: 3554 mm plate thickness: 42 mm pre-bending: 36 mm Control: total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: 7.3x2.4x2.5 m Stocknumber 2210024 Type of machine 4-roll CNC Plate bending machine Make FACCIN Type 4HEL 3554 Build in 2000 Type of control CNC Additional information Cap. 3554 x 42 mm prebending 36 mm Toprolldiam. 540 mm underrolldiam. 530 mm siterolldiam. 430 mm 55 Kw LxWxH= 7350 x 2400 x 2500 mm weight of the machine 49 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 140 t chamfer lenght: 3000 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2010012 Type of machine Pressbrake Make COLLY Type 3000/140 Build in nb Chamfer lenght 3000 mm Pressure 140 ton Stroke 250 mm Throat 310 mm Daylight 520 mm Additional information incl. 1 set of tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3050 mm plate thickness: 53 mm pre-bending: 45 total power requirement: 60 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210020 Type of machine 4-Roll Plate Bending machine Make DAVI Type MCB 3053 Build in 1998 Type of control Conventional Additional information max. Plate widht 3050 mm Max. plate thickness 53 mm Max. thickness prebending 45 mm Toprol diameter 525 mm under roll diam. 470 mm Site rolls diam. 400 mm Power 78 Hp Hardened rolls Conical bending Dimensions: 6000 x 3100 x 6700 mm in very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 20 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2110009 Type of machine Shear Make DARLEY Type GS 3100/20 Build in 1987 Type of control Incl. electric guide sheet widht 3100 mm Plate thickness 20 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gebr. Wabäma Circumat Elektronik 380.260, with circular knife, 1.5 kW, machine no. 04020665
Process chiller / chiller air-cooled, Type: TAEevo Tech 351 P5-offAD bypass MTA S.p.A. TAEevo Tech 351 P5-offAD Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Including crank pan heater, electronic expansion valves, phase monitoring, buffer tank 350 liters and built-in P5 high-pressure pump. Extras: - Open filling system/ tank attached - Bypass with manual valve between water inlet and outlet Cooling capacity kW 66 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 11.2 Available pump pressure (bar) 4.68 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 39 Max. Current (A) 68 Starting Current Circuit (A) 213 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 108 ...
Process chiller / chiller air-cooled, Type: TAEevo Tech 351 P5-offAD bypass MTA S.p.A. TAEevo Tech 351 P5-offAD Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Including crank pan heater, electronic expansion valves, phase monitoring, buffer tank 350 liters and built-in P5 high-pressure pump. Extras: - Open filling system/ tank attached - Bypass with manual valve between water inlet and outlet Cooling capacity kW 66 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 11.2 Available pump pressure (bar) 4.68 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 39 Max. Current (A) 68 Starting Current Circuit (A) 213 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 108 ...
Please find herewith list of spares of Wartsila 32LN available for sale. Some photographs are attached for your ready reference. If you are interested in anyone, please inform us enable us to quote you in detail. 1) CYLINDER HEAD 2) PISTON 3) EXHAUST VALVES 4) INLET VALVE 5) WATER PUMP 6) INJECTION PUMP 7) HOUSING WITH BEARING and more Small Spares available
Technical data Max mechanical speed: 190 mpm (630fpm) Max. web width: 370 mm (14"4/8) Flexo Printing repeat range: from 5,5" to 24" Maximum flexo printing width: 360 mm (14"1/8) Maximum die cutting width: 360 mm (14"1/8) Web tension: max. 30 kg Drivers and motors: Emerson - Control Techniques Regulations: "CE" Mark Die cutting repeat range: from 8" to 24" (suggested form 12") Substrate thickness range: min 12 micron (0.5 mil) only PET - max. 250 gr/m² Standard machine voltage: 400 V AC three phase + 50 Hz + Earth - Automatic tension unwinder, for rolls up to 1000 mm(40") diameter,with integrated roll pick up from the floor - Servo driven infeed section,with automatic web tension control - Web guide - DUAL SERVO flexo printing stations with chilled impression cylinder for straight through short web path - Automatic pre-register 360° - Outfeed and rewinding section wi ...
JORDI PHE-30180 CNC hydraulic press brake was built in 2013 in Spain by JORDI UNIVERSAL V.S.L. The machine, designed for precision machining of sheet metal with a maximum length of 3550 mm, is an excellent choice for any industrial plant. The combination of a high press force of 175 tonnes and an extremely stable design guarantees the best bending results, even during the most intensive challenges. All this is complemented by an intelligent CNC control with all the necessary functions. The PHE-30180 CNC press brake weighs 11000 kg. Technical specifications of the JORDI PHE-30180 press brake - CNC controller: ESA 530 - maximum press force: 175 t - maximum sheet metal length: 3550 mm - maximum slider stroke length: 265 mm - distance between columns: 2600 mm - top tool weight: 55 kg - bottom tool weight: 66 kg - light curtains - foot switch control - oil tank capacity: 250 l - ...
sheet width: 3000 mm plate thickness: 10 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 9,8 t dimensions of the machine ca.: 4,15 x 3,55 x 2 m Brand: Durma Type: DHGM 3010 Year of make: 2002 Knife length: 3.000 mm Plate thickness: 10 mm Electric backstop Machine dimensions (lxwxh): 4.150 x 3.550 x 2.000 mm Machine weight: 9.800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 320 mm, 500 mm, 3800 1/min
OKUMA Genos L 3000-e / 2021 Circumferential diameter max. 390 mm Turning diameter 300 mm Turning length 500 mm X - Axis 235 mm Z - axis 520 mm Y - Axis 100 (+50 / -50) mm C - Axis 360 / 0.001 ° Main spindle: Bar passage 70 (80) mm Speed range 38 - 3800 rpm Spindle motor 22 KW Torque 412 Nm Sub-spindle: Bar Passage 43 (53) mm Speed range 6000 rpm Spindle motor 7.5 KW Torque 47.7 Nm Tool turret: Number of applicants WZ im Revolver 12 Speed range 45 - 6000 rpm Drive 5.5 KW Torque 31.3 Nm Machine weight approx. 5500 kg CNC OKUMA OSP P300LA-e Electr. Handwheel Software: Automatic main spindle interpolation Software: Screw Line Interpolation Software: Eccentric milling Software: Tool height correction in Y-axis Software: Synchronized tapping with applied tapping Tools Software: ADVANCED ONE-TOUCH-IGF with autom. Work plan creation OSP-P300LA-e TE ...
pressure: 320 t chamfer lenght: 4000 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: m Brand: LVD Type: PPEB 320/40 CNC brand: Morris CNC model: Solutions ESA 630 Year of make: 1990 Hydraulic Capacity: 320 T Bend length: 4.000 mm Multi V + J-knive Steered backstop X+R Incl. 1 Set of tools Machine weight: 25.000 kg Machine is flat on the ground The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Airport Slopes Runway Runway Winter Service - Spreaders Spreading trailer Schmidt pre-wetted salt, up to 24 m spreading width Trailer with Aebi-Schmidt "Stratos" litter body, solids and brine tanks. Contents: gritting agent 5 m³, liquids, e.g. brine: 5,200 ltr. Spreading width: 6-24 m in steps of 1 m Propulsion: Hatz 3M41 diesel engine Operation control by remote control with additional motor remote start/stop and motor monitoring. Curb weight 6,500 kg, gross vehicle weight 20,000 kg, tyres 425/65R22.5 164J, NATO towing eye 76 mm! Built in 2002. Hardly used, hardly any corrosion, accident-free. Operating manuals with spare parts lists completely available. More winter service technology in stock - see sample photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscap ...
Euro supports eco 350 - new Steel prop, galvanized • Effortless loosening of the adjustment nut due to special thread geometry • Less effort due to low weight, 17.60kg • Reliable to use due to consistently high load capacity of at least 20kN according to EN 1065 • Easy height adjustment through hole numbering Europrop eco 350, new construction prop made of steel, galvanized - effortless loosening of the adjusting nut due to special thread geometry - less effort required due to low weight, 17.60kg - safe to use thanks to consistently high load-bearing capacity of at least 20kNto EN 1065 - - easy height adjustment thanks to hole numbering
Flush milling machine HolzHer UF 362 with feed HolzHer 3 rolls Width max. 50 mm 2 motors 0.55 kW, 3 x 400 V, 50 Hz Year of construction 1984 Weight approx. 300 kg L x W x H: 120 x 100 x 130 cm The Fraese is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
Process chiller / chiller air-cooled, Type: Galaxy GLT 135 SHE MTA S.p.A., The Galaxy GLT 135 SHE are compact chillers designed for outdoor installation (from -20°C to +43°C) are suitable with plate evaporator, scroll compressors, control and control cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C (EC fans), P2 pump, 510 litre buffer tank, electr. Antifreeze heating, condenser filter mats incl. Vitaulic couplings. Cooling capacity (kW): 354 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.7 Available pump pressure bar: 2.51 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 6 Power levels (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 167.7 Ma ...
Lifter Papa Withforce WE 3616 Lifting height 2500 mm Load capacity 1600 kg Load center 800 mm with charger Battery needs to be replaced L x W x H: 2.0 x 1.5 x 2.5 m Year of construction 1992 Weight approx. 1000 kg The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
maximum number of results exceeded
please refine your search
