sw 3 ha used for sale

Hagen & Göbel HC22E Tapping Machine - Product type HC22E -Brand Hagen & Göbel -Speed range 56-355 rpm -Table dimensions approx. 600x500mm -Year of construction 1988 Dimensions: LxWxH 1.1x0.7x2.0 meters / Weight 1000Kg

Blister Pack PVC ALU Sold with 2 sizes for oblong and round tablets. Cut size: 57x90mm Advance: 126mm, Elec: 380 , Dimensions: 5500 (with reel) x 1030, Height: 1600, No advance (mm): 126mm, Width (mm): 190, Feed pitch (mm): 220

General SKU101Y726 MakeHändle TypeEDR 21-A No.PZ-3445 Year of construction2000 LocationBarneveld Main Features Motor22 KW Length1400 mm Inlet diameter210 mm Specified Features - Double screw extruder MaterialStainless steel Double screw extruders Screw press(1x) Double screwcheck Screw diameter210mm Screw length1400mm Motor22,0 KW, 400/690 Volt Speed± 43 Rpm Inletdia. 245mm With jacket(max. 6 bar) Information Floorspace3,6x0,9 M Total height1,3 M Weight2950 KG Extra Specifications- Sieve plate housing is missing - Max. pressure 20 bar DiscountDouble screw extrudersHaendleDiscountExtruders > Double screw extrudersBrand > Haendle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...

General SKU041H136 MakeHändle TypeEDR 21-A No.PZ-3444 Year of construction2000 LocationBarneveld Main Features Motor22 KW Length1400 mm Inlet diameter210 mm Specified Features - Double screw extruder MaterialStainless steel Double screw extruders Screw press(1x) Double screwcheck Screw diameter210mm Screw length1400mm Shaft diameter100mm Pitch250/140mm Motor22,0 KW, 400/690 Volt Speed± 43 Rpm Inletdia. 245mm With jacket(max. 6 bar) Information Floorspace3,6x0,9 M Total height1,3 M Weight2950 KG Extra Specifications- Max. pressure 20 bar DiscountDouble screw extrudersHaendleDiscountExtruders > Double screw extrudersBrand > Haendle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

CNC punching machine Type: OMATIC 130 DTRH Manufacturer: Haco Year: 2014 Control: TPC 69C Graphics Pressing force: 30 t Max. sheet size: 4000 × 1500 mm Max. sheet thickness: 6.5 mm (steel) Positioning accuracy: ±0.05 mm Features and equipment: CNC turret punch Brush work table - sheet metal surface protection Hydraulic clamps High punching speed, also suitable for nibbling Stable construction, reliable industrial operation The machine comes with an extensive set of die-cutting tools in excellent condition Tools intended for black sheet in thicknesses of approx. 0.8 – 3 mm Machine in good condition, under power Find more here - / Contact us at -

Key data: 1600 kN

Haitian MA1600II/eco / Operating hours: 3,945 h Year of manufacture: 2018 Injection unit: Screw diameter: 45 mm Injection weight: 291 g Spray pressure: 1690 bar Dosing volume: 320 ccm Clamping unit: Clamping force: 160 t Spar spacing: 470x470 mm Size of the clamping plates: 670x690 mm Ejector: hydraulic Clamping unit: toggle lever Control: Haitian - Touch Screen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 3,945 h Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 2 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Central lubrication Dimensions: Weight: 5650 kg Length/Width/Height: 5.55x1.52x2.10 m All offered machines are started by our service technicians before they are sold. It is p ...

Haitian MA1600IIS with the Hilectro V-800IS robot / hybrid machine Year of Make: 2020 Injection unit: Screw diameter: 45 mm Injection weight: 291 g Spray pressure: 1780 bar Dosing volume: 320 ccm Clamping unit : Clamping force: 160 t Spar spacing: 470x470 mm Size of the clamping plates: 700x700 mm Ejector: hydraulic Clamping unit: toggle lever Control: Keba - Touch Screen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 3 Main motor of the machine - Servo motor driven by inverter - Energy saving Central lubrication It is possible to change the screw diameter Hilectro V-800IS robot Year of Make: 2020 5-axis robot: 4 axes are driven by servo motors (electric): X, Y, Z, B (rotation) Touch control panel Robot with adapt ...

Hatz generator set 15 / 17.5 kVA incl. starting unit + tank - - - - - Engine: - Hatz (Germany) - Model: 2L41C - 2 cylinders - Diesel - Air-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - Power: 25 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Start Unit: - Ignition lock for starting - 1x volt display - 1x Hertz display - Emergency stop switch - - - - - Condition: - The generator set is in used and fully functional condition - A test run was done - The generator starts well - The generator generates 400V and 50 Hertz - The generator set has an output of 15 - 17.5 kVA - The installed generator has an output of 25 kVA for possible bridging of short-term, higher starting currents - - - - - Scope of delivery: - Hatz generator set 15 / 17.5 kVA - With starting unit - Tank (with installed on  ...

Hatz Power Generator Set 30 kVA - Silent Pack + + incl. starting unit + tank + + - - - - - Engine: - Manufacturer: Hatz (Germany) - Model: 3L40C - Silent Pack (soundproofed) - 3 cylinders - Diesel - Air-cooled - 1500 rpm - Displacement: 2574 cc - - - - - Generator - 30 kVA - 230 / 400 volts - 50 Hertz - - - - - Start - Unit: - Ignition lock / start button for starting - Volt display - Hertz - Display - 3x Ampere display - 1x 400V 63A socket - - - - - Condition / Origin: - The power generator was used in a craft business for occasional operations - A test run with load acceptance was done - The engine runs well and the generator generates 400V and 50 Hz. - - - - - Scope of delivery: - Hatz generator set 30 kVA - Consisting of motor and generator - Installed on a metal base frame - Incl. start unit with monitoring indicators - Incl.  ...

Key data: 200 t

Capacity: 2000kN Year: 2017 Serial: 17X00095 Max Daylight: 1700mm Stroke: 1200mm Max Tooling Base Size: 2500x1500mm Max Advance Speed: 200 mm/s Electrical Supply: 415 Volts Phase: 3 Motor Rating: 50kW Continuous Approx. Net Weight: 25,000kg Max. Top Tool Weight: 10,000kg

Reference : C14241 ATEX flowmeter from the brand ENDRESS HAUSER model PROLINE t-mass 65. Technical characteristics Model PROLINE T-MASS 65 Equipment Setup ATEX Documentation No documentation Status In your state Manufactured by ENDRESS+HAUSER

ATEX flowmeter from the brand ENDRESS HAUSER model PROLINE t-mass 65. Technical characteristics Model PROLINE T-MASS 65 Equipment Setup ATEX Documentation No documentation Status In your state Manufactured by ENDRESS+HAUSER

Hello, We hereby offer you a used hand plate sheet metal snips, Bernardo, type HLS 1050 x 2.0. Manufacturer Bernardo, PWA Handels ges. m.b.H. Type HLS 1050 x 2.0 Year of construction 05/2023 Machine No. PWA-230114 Cutting length 1050 mm Max. sheet thickness (steel 400 N/mm²) 2.0 mm Backgauge adjustment 0 to 600 mm Table stop adjustment 95 to 450 mm Table size 1300 x 600 mm Working height approx. 765 mm Machine dimensions 2000 x 1040 x 1600 mm Transport dimensions 1900 x 1050 x 1120 mm Machine weight 500 kg Optional accessories included: Back gauge 600 mm Hold-down device with quick clamp Note: The aforementioned technical data have been taken from brochures of the manufacturer or other sources, for which we cannot guarantee the accuracy and completeness. Scope of delivery: 1 piece used hand panel sheet metal shears Bernardo, type HLS 1050 x 2.0 Area ...

Handtmann VF 50 incl. turning device and complete accessories

Eyelet machine Piccolo for sale Sell a Piccolo eyelet machine in good, working condition. Ideal for inserting eyelets in paper, cardboard, leather or plastic. Easy hand operation and stable design. Inspection and test possible.

The machine is in very good technical condition, testing is possible by prior arrangement.

General SKU219Y070 MakeRetsch Haan Serial63363 Magento base g_extra_specifications220Watt 3x 220/50hz Specified Features - Roll breaker MaterialStainless steel Roll breakercheck Rotor sizesø 130 x 215 mm Teeth height20 mm Inlet65 x 35 mm Outletø 40 mm Motor2,2 kW (380 V, 2870 rpm) With variable speed drivecheck Rotor speed2870 rpm Information TypeTM 1 Year of construction1997 Mounted on framecheck LocationBarneveld With switchcheck Floorspace0,75 x 0,70 m Total height1,40 m Weight150 kg Extra Specifications With an additional roll a head that moves 0–60° and a timer Roll breakersRetsch HaanBreakers > Roll breakersBrand > Retsch Haan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

CONTROLS   CNC controls HAAS WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   X-axis travel: 3048 mm   Y-axis travel: 1016 mm   Z-axis travel: 762 mm TABLE   table surface (left-right): 3048 mm   table surface (front-back): 711 mm SPINDLE / HEAD   drive power: 15 kW   tool fixture: ISO SK 40 TOOL MAGAZINE   magazin type: disc magazine   number of positions: 24 ELECTRICAL SPECIFICATIONS   total power consumption: 15 kW DIMENSIONS / WEIGHTS   space requirements -left/right-: 6528 mm   space requirements -front/back-: 3531 mm   total height: 3105 mm   total weight approx.: 15368 kg ATTACHMENTS   autom. tool clamping: yes   chip conveyor: yes   coolant unit: yes    ...

This 3-axis HAAS VF-5SS was manufactured in 2016. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and a 24-position tool magazine. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5SS vertical machining centre we have for sale. Contact us for further details.

serial number: 1068645 x-travel: 2080 mm y-travel: 812 mm z-travel: 750 mm : ja : ja internal cooling: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5-axis cnc machining center Type: UMC-750 Manufacturer: Haas Year: 2022 X: 762 mm Y: 508 mm Z: 508 mm Tool magazine 30+1 positions Spindel taper: ISO 40 The distance between the tip of the spindle and the table (~ max) 610 mm Distance between spindle tip and table (~ min) 102 mm Maximum weight on the table (evenly distributed) 300 kg 25 micron filter Chip conveyor Spindle center cooling pressure 300 psi Wireless tool and workpiece probe Synchronized threading Rotating measuring ruler Machine in good condition, under power. Find more here - / Contact us at -

Manufacturer: HAAS Model: TYRON 1500 E Year of Manufacture: 2014 Machine Type : stationary electric twin shaft primary shredder Tool configuration: special reinforced tooling, 4-part with 7/6 discs per shaft Shaft speed: infinitely variable, approx. 0 to 32 rpm Counter-comb bar: included Raised tipping hopper: included Drive Unit - Drive power: 2 x 90 kW - Central lubrication: for all 4 main bearings Electrics / Control - Display: IFM display - Remote control: radio remote control included - Shredding programmes: 4 pre-set programmes (wood, waste, special, green waste) Discharge Conveyor - Discharge conveyor: included Find more here - / Contact us at -

Manufacturer: HAAS Model: VF6 SS Year of Manufacture: 2008 Machine Type : Vertical Machining Center - Control: Haas CNC Axis Travels - X axis: 64 inches (1,625 mm) - Y axis: 32 inches (813 mm) - Z axis: 30 inches (762 mm) Spindle - Spindle speed: 12,000 RPM - Spindle taper: 40 taper (CT40 / BT40) - Spindle type: inline direct-drive, high-efficiency (HE) - Spindle motor: 30 HP Tool Changer - Type: side-mount automatic tool changer (SMTC) - Configuration: high-speed Super Speed ATC Electrical Requirements - Voltage: 360/480V - Phase: 3-phase - Frequency: 50/60 Hz - Full load: 40 amps - Largest load / short circuit: 70 amps - Interrupting capacity: 10,000 amps - Enclosure: NEMA Type 1 - indoor use only Find more here - / Contact us at -

x-travel: 508 mm y-travel: 508 mm z-travel: 508 mm total power requirement: kW weight of the machine ca.: 3650 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. Drilling diameter: 40mm, grinding wheel diameter: 200mm, grinding wheel width: 40mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1200mm/850mm/1400mm, weight: approx. 350kg. Including cooling lubricant device and 10x spare grinding wheels. Documentation available. On-site inspection is possible.

Haco PPES 110 ton x 4100 mm CNC Capacity: 110 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 11 mm/sec Returning speed: 100 mm/sec Electric motor (power): 11,4 kW Length: 4210 mm Depth: 1500 mm Height: 2530 mm Weight: 11 ton

met plaatsteunsysteem Cutting length: 4100 mm Max sheet thickness st 45: 6 mm Strokes/min: 11 > 24 str/min Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 > 2,5° Electric motor (power): 20 HP Length: 4500 mm Depth: 1942 mm Height: 2050 mm Weight: 8,3 ton Number of sheet holders: 23x

Container roller set, container rollers for moving standard containers, Haacon, 16 to load capacity – used -: Price from location: 7.500.-€ (net) Manufacturer: Haacon Type: 4336.16-231720 Year of Make: 2022 Factory number: 1074982-01-00-001-51 Component Number: 215993 Load/set: (4 units): 160kN Load/Unit: 60kN Rolling speed: max. 6km/h Container castors for moving standard containers Handlebar for handling the roller when dismantled and for resteering with parking brake Castor set consisting of pull linkage, four swivel castors, lockable in the direction of travel Taxiing up to 6 km/h Former new price: 9.907.-€ Available: immediately Condition: like new – only used about 3 times Location: 79183 Waldkirch

Inv. Num. : 8982 Type: GX 1000 Producer: Bridgeport Hardinge Created: 2007 Parameters: Control system: Siemens 810 D Number of stacking positions: 24 pieces Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Cone: SK 40 With automatic change

- GX- Performance VMCs - Dr HeidenHain iTNC530 with HR 410 Handwheel  - Coolant system - Rigid sructure and superior reliability - Central lubrication

sheet width: 4000 mm plate thickness: 30 / 35 mm pre-bending: 30 mm diameter of upper rolls: 570 mm side roll diameter: 450 mm diameter of lower rolls: 540 mm bending speed: 4 m/min min. bending diameter: 650 mm total power requirement: 60 kW weight of the machine ca.: 52 to dimensions of the machine ca.: - m The machine was overhauled in 2022 Equipment: - Hydraulic 4-roller round bending machine - Roll material: 61 MnCrMo 43 - Driven rolls: 2 Top-and bottom roll -- Drive: over 2 hydro motors direct flanged -- Adjustment speed bottom roll: 0-200 mm/min -- Adjustment speed side rolls: 0-700 mm/min - Speed compensation between top-and bottom roll: automatic - Operation of the tilting bearing: hydraulic - Tilting of the top roll: hydraulic - Bearing block: hydraulic - Indicator device of roll position: digital The data for this ad was created with ModulMWS - the software solution of Logo ...

This machine automatically places a cloth or paper doily on the glass and usually secures it with a rubber band or string., Capacity: approx. 30 glasses / min,, The machine requires compressed air, oil and water free., power: approx. 30 glasses / min

automatic rotary machine,, in use for mustard,, set up on round plastic cups with a diameter of 70 mm and a height of 80 mm,, additional format for rectangular cups: 55 x 43 x 17.7 mm, Filling volume: 5 - 200 ml, Output: up to 1,500 cups per hour,, Rotary consisting of:, Cup magazine, automatic unstacking of the cups,, filling station,, Lid station with corresponding lid magazine and automatic unstacking of the lids,, Output of the filled and sealed containers to an integrated collection table

One HandTop ultraviolet flatbed printer is available. Print resolution X/Y: 1200dpi/1200dpi, max. material size: 1600mm/1000mm, max. material thickness: 100mm, print speed per hour Draft/Production/Quality: 36m²/27m²/20m², color system: CMYK. Machine dimensions X/Y/Z: approx. 3400mm/2200mm/1250mm, weight: approx. 500kg. Documentation vorhanden. An on-site inspection is possible.

Hagesana Cream King SE 2 Cream Machine Type: Cream King SE 2 - With stainless steel boiler - Mobile on castors - 230 volts Boiler interior dimensions: - Diameter: 45cm - Interior height: 55cm

Record Gr.2 Semi-Automatic Roll Press Dough Dividing and Rounding Machine - Manufacturer: Record - Semi-automatic bun press - Size 2 - Weight range: 25- 85 grams - 30 pieces - 380 volts - Machine is completely NEW painted

This 3-axis HAAS VM-6 was manufactured in 2024. It features a spindle speed of 12,000 rpm and a robust table size of 1,626 x 711 mm, with a maximum weight capacity of 1,814 kg. The machine includes a tool changer capacity of 30+1 and a rapid traverse rate of 15.2 m/min. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS VF-1 vertical machining centre was manufactured in 2013. It features a HAAS control, a spindle power of 22.4 kW, and a spindle speed of 8100 RPM. The machine includes a carousel-type tool magazine with 20 positions and a coolant capacity of 208 liters. If you are looking to get high-quality milling capabilities, consider the HAAS VF-1 machine we have for sale. Contact us for more information.

turning diameter over bed: 430 mm turning diameter over slide rest: 230 mm turning length: 1000 mm centre height: 215 mm centre distance: 1000 mm spindle bore: 56 mm spindle turning speed range: 19 - 2000 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,9 t dimensions of machine L x W x H: 2,78 x 1,25 x 1,40 m Accessories: 3-jaw chuck 250 mmø, 4-pos. tool post, solid steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A complete cut-off grinding system is available. System components: 1) Cut-off grinding machine Harald Baumgarten. 2) Bundle loader Sema Systemtechnik. 3) Bar breaking device. 4) Bar rotating drive and measuring station. 5) Weighing station with section sorting. 6) Extraction and filter system. 7) Soundproof cabin with safety fencing. 8) Four-column press Winter. 9) Hydraulic power unit with pumps. 10) Control cabinet and operator panel. Documentation available. An on-site inspection is possible.

pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2550 mm stroke of upper beam: 200 mm throat: 300 mm dayligth: 440 mm working feed: 9.0 mm/sec return speed: 80.0 mm/sec : 265 bar Control: konv. work height max.: 965 mm total power requirement: 15.0 kW weight: 10500 kg range L-W-H: 3360 x 1750 x 2800 mm Equipment: - simple / conventional electro-hydraulic press brake - pivoting operation, front left - electric, infinitely variable depth adjustment (Y1 Y2 axis) Torsion shaft for parallelism - Electro-motorized backgauge (X axis) with handwheel for fine adjustment on recirculating ball screws 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - manual table crowning - split set of roe foot upper tools ... H = 210 mm - 1x as good as new universal V-die block, reversible with anti-corrosion grease V openings in mm : 12/35/25 50 1 ...

: 0460 mm : 1500 mm : : 230 mm : 78 mm : 400 mm : 2200 U/min : D1-8 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Worm Screws Length 6000, Width 260

Geho ZD 900 in a sound-dampened enclosure with a Hatz 1D90E-Z diesel engine. The ZD900 piston pump is designed for vertical and horizontal dewatering. These positive displacement pumps are self-priming and ideally suited for pumping a mixture of water and air without any restrictions. Furthermore, these pumps can run dry without causing damage or wear to components. Optionally available with any desired coupling/connection. MAX 95 m³/h MAX: 20 MWK. In stock; please feel free to call or email us, we are happy to assist you. Additional information: FEATURES - Very quiet noise level - 47 dB(A) at 10 meters - 1D90E diesel engine - Easy access to engine and pump - Stackable thanks to sturdy integrated stacking corners - with forklift pockets for easy transport BENEFITS - Small and light, big in capacity, efficiency, and lifespan - Very quiet, 47 dB(A) at 10m. - All panels/doors are made of g ...

turning diameter: 313 mm turning length: 501 mm control: Fanuc Oi-TD total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Fanuc Oi-TD cnc control main spindle: collet chuck device sub spindle: collet chuck device 12-fold revolver (BMT 55) C-axis Y-axis driven tools coolant device Technische Daten: / technical details Schwingdurchmesser / rotary diameter 707 mm Drehdurchmesser / turning diameter 313 mm Drehlänge / turning length 501 mm X-Weg / X-travel 196 mm Z-Weg / Z-travel 715 mm Y-Weg / Y-travel -25,4 / +65 mm max. Drehzahl Hauptspindel / max. spindle speed main spindle 5000 UpM /rpm max. Drehzahl Gegenspindel / max. spindle speed sub spindle 5000 UpM /rpm Anzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mm Antriebsleistung Hauptspindel (30min)/ drive capacity main spindle (3 ...

2x pieces of Unused Endress+Hauser PMP75 Pressure Transmitters., Order code: PMP75-3EX77/0, MWP 0.1/10 bar, p -1 ...10 bar, Mat. 1.4435/316L, Will be sold as a set only., Type of Machine: Pressure Transmitter

Unused Endress+Hauser Smartec CLD18 Conductivity measuring system., Order code: CLD18-1457/0, Firmware version: 02.00.09, Measuring range: 200uS/cm - 1.000 mS/cm, Temperature: -10 ... 110°C, Pressure: 13 bar, Type of Machine: Conductivity measuring system

Closed stainless steel butter silo. Single jacketed. Vacuum on the silo is possible (manometer 0 / - 1,0 Bar). The horizontal buffer silo is equipped with 2 augers (driven by 1 main motor of +/- 3 kW - 380 V - 50 Hz - 1.420 rpm - n2: 14 rpm, no nametag on motor, only on drivework). Total capacity: 3.000 kg. Manhole, round, on one side and a sight glass on the same side. 1x infeed possibilities for direct connection of the outfeed pipe from a Continuous Butter Machine (CBM) on the back side and one on the side of the QHK butter silo (DN100). CIP cleanable with spraybowl in the top. Outfeed plate with 1x rectangular flange and 1x round DN100 flange on the outfeed of the silo. Excluding control panel or outfeed butterpumps., Type of Machine: Buttersilo, Capacity: 3.000 kg, Motor: +/- 3 kW - 380 V - 50 Hz - 1.420 rpm - n2: 14 rpm, Dimensions: ± 275 x 200 x 225 cm, Weight: ± 1.500 kg

A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible.

Manufacturer: Harald Baumgarten/Sema Systemtechnik Model: TM 400S Year of Manufacture: 2014/2015 Type of Machine : Angle Grinding System The system consists of the following components: - Cut-off grinding machine type TM 400 S with bundle loader (manufacturer Sema Systemtechnik, - rod breaking device, - Rod rotary drive / measuring station - Weighing station with section sorting, - Extraction and filtration system, - Soundproof booth (manufacturer: HüWa Schallschutz und Anlagenbau) and protective fencing - Four-column press (Manufacturer: Winter Presses) - Hydraulic power unit with hydraulic pumps - Control cabinet and control panel Find more here - / Contact us at -