129,017 used machines on RESALE, but how to find them? Machine Search
Mach. No.: AD 26953 - Motor: Scania - Rotor size: 1.400 x 1.500mm - Included: Conveyors, Overband Separator, Dumpbunker, Feeders, Pre-screen and Hydraulic openingssystem
Rotor Dia. x W.: 1.000 x 680mm. - Inlet: 690 x 350mm. - Included: 55KW E.motor, control-unit, hydraulic-unit and frame. New spare-parts in stock.
Manufacturer: Hans Schoen Model: NH 160 Year of Manufacture: 1988 rebuilt in 2016 The press is being sold without tools or spare parts. Technical Data Press force max.: 1,600 kN Main drive power: 30 kW Speeds Rapid advance from: 300 mm/sec Pressing speed: 18 mm/sec Rapid return: 300 mm/sec Strokes Max. stroke: 150 mm Max. daylight opening: 450 mm Table and Ram Dimensions Ram area: 730 × 560 mm Table area: 650 × 650 mm Openings Front vertical opening: 750 mm Side vertical opening: 250 mm Heights Table height above floor: 850 mm Table bore diameter: 150 mm Ram bore, Ø H7: 60 mm T-slots T-slots in table, DIN 650 H12 diagonal: 22 mm T-slots in ram, DIN 650 H12: 22 mm Two pieces, front to back Machine Dimensions Machine footprint approx.: 1,850 × 1,500 mm Machine height approx.: 2,850 mm Find more here - / Contact us at -
Type: MA16000/15800 Monitor: KEBA V3 Year : 2011 Screw diameter: 140 mm Shot volume: 9683 cm3 Injection weight : 8825 g Bettween tie bar HxV: 1550 X 1430 mm Maxi Mold Height: 1500 mm Min Mold Height: 700 mm Ejector stroke: 400 mm Total Clamp Open daylight: 3100mm 4 corepulling 4 Cascade Injection
Engine Brand: HATZ, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 42.5 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/hatz-4l42c-used/820, , = More information =, , Type: Engine, Type number: 4L2C; Transport weight [kg]: 490
This Impulse IP-130 Brussel piston pump is designed for vertical and horizontal dewatering. These positive displacement pumps are self-priming and extremely suitable for pumping a mix of water and air without any restrictions. In addition, this pump can run dry without worry, without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , MAX: 42 m3 per hour, , MAX: 22 MWK, , Throughput capacity: 42 m3/h, Motor brand: Hatz, Max. head: 22 MWK, Weight: 1200 kg, , = More information =, , Year of manufacture: 2025, Applicable material: Water, Empty weight: 1.200 kg, Connector size: 4 Cardan, Cargo space capacity: 700 l, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading ...
This diesel-powered GEHO ZD 300 double-acting piston pump in a soundproofed casing has the great advantage, compared to its big brothers, of its light weight and compactness. The great efficiency of the ZD 300 ensures an enormous capacity., Feel free to call or email us for the possibilities., , Throughput capacity: 35 m3/h, Motor brand: Hatz, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 895 kg, , = More information =, , Year of manufacture: 2025, Applicable material: Water, Empty weight: 895 kg, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you ...
For sale: BBA BA150 K235 HA GL – a dry self-priming construction pump designed for reliability, power, and efficiency, suitable for various purposes on your construction projects., , This 6 diesel-powered pump combines a high capacity of 380 m³/h with a maximum head of 21 meters and a ball passage of 90 mm. The low-noise enclosure makes this machine particularly suitable for use in urban or residential areas., , The Hatz 4M41 diesel engine delivers 32 kW of power, and the vacuum pump with a mechanical float chamber guarantees a stable suction head of 8 meters. Thanks to the E-slide® system, the pump unit can be easily removed from the enclosure for service or inspection, making maintenance processes fast and efficient., , Key specifications:, - Capacity: up to 380 m³/h, - Head: up to 21 meters, - Free passage: 125 mm, - Weight: 2300 kg (without fuel), - Dimensions: 2500 x 1210 x 196 ...
cutting diameter: 230 mm capacity 90 degrees: flat: 320 x 130 mm capacity 90 degrees: square: 230 x 230 mm capacity 45 degrees: flat: 230 x 140 mm capacity 45 degrees: round: 220 mm capacity 45 degrees: square: 190 x 190 mm capacity 60 degrees: flat: 120 x 105 mm capacity 60 degrees: square: 105 x 105 mm capacity 60 degrees: round: 120 mm turning speed range:: 35 - 70 m/min dimensions of saw-band: 2720 x 27 x 0.9 mm height of material-table: 950 mm total power requirement: 1.0 / 1.5 kW weight of the machine ca.: 410 kg dimensions of the machine ca.: 800 x 1550 x 1450 mm New price ~ 6.500 euros Furnishing: - semi-automatic miter band saw, for cuts -45 / +60 degrees continuously - Infinitely variable saw feed via precision throttle - Infinitely adjustable cutting speed - Cooling device - Horizontal vise electrically-mechanically acting - Saw band - rotating - front control panel - User ma ...
sheet width: 2500 mm plate thickness: 2 mm distance between columns: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The HARDINGE GS42 is a CNC lathe for the precise turning of hardened surfaces Reason for sale: Order lost before complete start of production ONLY 598 h Control: FANUC Oi-TF max. rotary Ø: 284 mm max. circumferential Ø: 457 mm Max. speed: 6,000 1/min Spindle bore: 42 mm Turret with 12 stations (VDI 30) (not driven) PERFORMANCE PLUS package - Linear glass scales for X and Z axes - Spindle cooler - Heat exchanger for motor and spindle. High-pressure coolant system, cooling by turret (20 bar) Heavy duty running tip VOP40P Complete System (Precision transducer)
Bending length: 4200 mm pre-bending: 34 mm Bending strength: 38 mm power capacity: kW Number of rollers: 4 Stk Adjustable rollers: Stk diameter of upper rolls: 540 mm diameter of lower rolls: 500 mm side roll diameter: 365 mm work speed: 0 - 8 m/min total power requirement: 55 kW weight of the machine ca.: 35 t Control: Haeusler Bendtronic 2.0 dimensions of the machine ca.: 7.5 x 2.1 x 2.4 m Equipped with: - Haeusler BENDtronic 2.0 control system - Smallest possible bending diameter with upper roller Ø540mm: 595mm (depending on springback) - Roller bearings: Self-adjusting roller bearings - Max. cylinder force against upper roller: 3,245kN - Roller material: 42CrMo4 (1.7225) - Speed compensation between upper and lower roller: automatic when the two-roller drive option is selected - Roller adjustment: hydraulic - Tilting of the lower roller and both side rollers for cone bending: infini ...
General SKU299T699 MakeEllerwerk (Rebuild by Heinkel) Type937H No.80.065/09.81.003 Year of construction1981/ ( rebuild 2010) LocationBarneveld Main Features MaterialHastelloy Motor22 KW Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity210 Ltr. Basket sizes1050x500 mm Wall thickness12 mm Max. loading weight230 kg Motor45.0 kW, 400/690 Volt, 1480 rpm.( EX) Max. basket speed1400 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck Motor0,75 kW, 230/400 Volt, 1430 rpm (EX) InletDN 80, DN32 Solids outletDN 200 Liquid outletDN 150 MaterialStainless steel 2.4602 (Hastelloy C-22), Stainless steel 2.4610 (Hastelloy C-22) Information Mounted on foundation platecheck Floorspace3,85x1,9 m Total height1,8 m Weight± 10000 kg CEcheck ATEX compatiblecheck Extra SpecificationsThis Ellerwerk was completely overhauled by Heinkel in ...
Tenoning spindle: 1 St. Number of milling agregates: 0 St. Spindle diameter: 40 mm Small window production consisting of: W. -------------------------------------------------- 1) Haberkorn FZS1 slotting machine 2) Okoma SF3F table milling machine 3) Oertli tool for the Haberkorn and Okoma machines Wooden windows 1 set IV 68/78/88 and 1 set wooden aluminium windows IV 68/78 built in 2011 4) Götzinger OBM Plus corner bearing and olive drilling machine, Maco MultiMatic fittings -------------------------------------------------- Technical manufacturers description: - Haberkorn FZS1 slotting machine with automatic feed, -stepless height adjustment D 40 mm Cutting-to-length saw: -Spindle arrangement: top -Three-phase motor: 3 kW -Spindle diameter: 30 mm -Speed: 2800 rpm -Saw blade diameter: 400 mm -Automatic brake with speed monitoring -Horizontal pneumatic positioning, manually adjustable ...
CNC vertical machining center Type: TM-1P Manufacturer: Haas Year: 2014 Control: Haas X: 762 mm Y: 305 mm Z: 406 mm Table: 267 x 1213 mm Tool magazine: 10 positions Spindle speed: 6000 rpm Threading Mirroring HSM, equipment: chucks, collets, vices, universals, 3D probe Machine in good condition, fully functional, under power Find more here - / Contact us at -
Electric Cylinder Metric Cylinder ETB50M05PA57FMA200A Original price: 3500,- € Item Condition: New / Traces of Storage The goods come from a company liquidation from the automotive industry and were temporarily stored in paternosters. Storage traces possible. R10B1_EK You can find more cylinders - new and used - in our shop! International shipping costs on request!
Parker ETB50M10LA57FMA100A Electric Cylinder Manufacturer: Parker Electric Cylinder Type: ETB50M10LA57FMA100A Without servo motor Traces of storage may be present. More items - new and used - can be found in our shop! International shipping costs on request!
Glass machine for small jars approx. 4800 per h output for yoghurt in a jar Format customizable and overhaulable
ID3680 Haarup Mixodatamat 1200/2000 year/Year of construction 1993 Slab press for 50mm slabs with backing concrete, with mixer, portioning, press, including steel pallets for picking the pressed slabs. Slab press for 50 slabs with back concrete, with mixer, portioning, press, incl. steel pallets for picking the pressed slabs
material width: 1250 mm material thickness: 12,00 mm no. of straightening rolls: 19 sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 50 mm sheet length min.: 100 mm work height max.: 900 mm speed ca.: 2 - 20 m/min. total power requirement: 31 kW weight of the machine ca.: 16,50 t dimensions of the machine ca.: m The straightening machine HÄMMERLE is suitable for the precision alignment of parts. The hydraulically controlled guard locking also allows good judging results complex geometry. Infeed and outlet roller table inclusive Dimensions (L / W / H, approx.) Rectifying unit / frame 2300 x 3200 x 1800 mm Hydraulic 1600 x 900 x 1800 mm Switch cabinet 600 x 400 x 1900 mm Tank capacity 400 l Oil filling by the customer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WORKING RANGE -CUBIC- X-axis travel: 1270 mm Y-axis travel: 660 mm Z-axis travel: 635 mm SPINDLE / HEAD spindle revolutions (max): 7500 /min BASIC FUNCTIONS number of spindles: 1 number of turrets: 0 live positions: yes number of c-axes: 0 number of y-axes: 1 number of b-axes: 0 ATTACHMENTS chip conveyor: yes WORKING RANGE TURNING swing diameter (max): 635 mm worpiece length max.: 1372 mm workpiece weight max.: 1814 kg MAIN SPINDLE spindle revolutions (min): 0.001 /min spindle revolutions (max): 7500 /min X/Z SLIDE Z-axis travel: 635 mm X-axis travel: 1270 mm Y-axis travel: 660 mm TOOL MAGAZINE tool diameter max.: 178 mm tool length m ...
Inv. Num. : 8854 Type: MINIMILL HE Producer: HAAS Created: 2006 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 305 mm Maximum table load (uniform): 227 kg Spindle drive power: 7.5 kW Maximum vertical spindle speed: 6000 1/min X-axis travel: 406 mm Y-axis travel: 326 mm Z-axis travel: 381 mm Cone: ISO 40 Number of all tools: 10 pieces Machine height: 2565 mm Machine length: 2119 mm Machine width: 2077 mm Machine weight: 2018 kg
HAAS ST-20Y CNC lathe was built in 2022 in the United States by Haas Automation Inc. The machine has only worked for 119 hours to date and is like brand new. The HAAS ST-20Y is an excellent choice for the modern business. This is because it makes it possible to perform versatile 4-axis machining of the highest quality on any workpiece. All machining processes, i.e. milling, threading and drilling are performed by means of driven tools and a spindle with synchronised C axis. The 12-position BMT turret offers high productivity thanks to the larger contact area between tooling, toolholder and the turret itself. The operator, on the other hand, has at their disposal an advanced HAAS CNC control with a Visual Programming System (VPS), which significantly improves the daily operation of the machine. The VPS uses graphical templates to facilitate the creation of G-codes for even the most ...
Inv. Num. : 8856 Type: SL-10 THE Producer: HAAS Created: 2006 Parameters: Switch-on hours: 23550 h Hours: 13463 h Maximum turning length: 355 mm Maximum turning diameter: 279 mm Maximum turning diameter over bed: 252 mm Maximum turning diameter over support: 203 mm Maximum length of travel in the X-axis: 159 mm Max. travel length of the Z-axis: 356 mm Maximum spindle speed: 6000 1/min Weight: 2500 kg Equipment: Collet chuck Universal chuck
Vertical machining centre BRIDGEPORT GX 1600 - travel 1600x700x635 mm, CNC FANUC 0i-MD - coolant thrugh spindle, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1700x700 mm, Longitudinal travel x axis: 1600 mm, Cross travel y axis: 700 mm, Vertical travel z axis: 635 mm, Working feed x-y-z axes: 0 - 36.000 mm/1, Rapid feed x-y-z axes: 36 mt/1, Spindle taper type: 40 DIN-BT, Automatic tools change nr.: 30, Spindle speed: 0- 12.000 rpm, Spindle motor power: 22 Kw, Cnc: FANUC 0i_MD, Approx net weight: 10.000 Kg, accessories: Chip conveyor, coolant tank, coolant thrugh spindle
used fat baking appliance Habersang Primus 5/E automatic, checked and tested, internal dimensions 185 cm wide, 79 cm deep, for approx. 96 pastries, control Siemens S590U, Ser. no. 84710/001150, 9 kW, 380 V, 50 Hz
Vacuum filler VF 608 Handtmann Stainless steel Power: 3kW Voltage: 400 / 50Hz
Manufacturer: Brand Model: Liquid Handling Station Year of Manufacture: 2020 Type of Machine : Pipetting machine Find more here - / Contact us at -
pressure: 40.0 t chamfer lenght: 1270 mm distance between columns: 1000 mm column arm: 200 mm stroke: 100 mm dayligth: 308 mm ajustment speed: 150 mm/sec working feed: 1-10 mm/sec return speed: 100 mm/sec table width: 100 mm table height: 900 mm control: DNC 60 PS oil volume: 100 l voltage: 400 V total power requirement: 5.5 kW weight of the machine ca.: 2750 kg Equipment: - CNC electro-hydraulic press brake - CYBELEC DNC 60 PS CNC control Swiveling control panel, front left Tool & program library - CNC electro-motorized backgauge (X-axis) X-axis travel = 800 mm 2x manually adjustable backgauge fingers (R+Z axes) Backgauge on ball screws - CNC controlled axes Y1 - Y2 - X - Rehfuß upper tool system A with quick-change clamping Additional crowning device in the tool holder - 4V universal die block with 60 mm die shoe - 2x sliding material/support arms (Sliding System) - BOSCH/HOERBI ...
Brand: Hans Weber GmbH Model: ZE 20 Type Screw: Single screw Year of construction: 1999 Screw diameter: 20 mm L/D ratio 20 L/D Motor power: 3 kW Control Voltage: 200 V Dimensions (LxWxH): 3100 x 1200 x 1280 mm Weight: Approx. 300 kG Other: – Including swivel mounting arm – Including extra connection box
x-travel: 1016 mm y-travel: 660 mm z-travel: 635 mm control: Haas table surface area: 1.372 x 610 mm table load: 1.814 kg rapid traverse: 18 m/min turning speed range: 7.500 U/min power capacity - milling spindle: 22,4 kW tool taper: SK 50 | no. of tools in the magazine: 30 Stück weight of the machine ca.: 7,5 t dimensions: 3,5 x 2,47 x 2,98 m Vertical Machining Center with 4th axis - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter - 4th axis, HRT 210 A - prepared for cableless 3D touch probe - oil dust collector - tool measuring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BA150E Dirty Water Pump – Powerful, Reliable and Quiet, The BA150E is the solution for pumping contaminated water. This 6-inch mobile dirty water pump is designed to handle tough challenges and offers excellent performance combined with user-friendliness and environmental friendliness., Why choose the BA150E?, • Powerful performance: Pump capacity up to 475 m³/hour with a solids passage of up to 80 mm. Perfect for pumping water with large dirt particles., • High efficiency: The high pump efficiency and the adjustable wear plate with cutting grooves ensure low operating costs and a long service life., • Ready for immediate use: Thanks to the innovative MP vacuum system, the pump primes quickly and reliably, even from dry conditions., Technological innovation and sustainability, Centrifugal pump, The semi-open impeller, adjustable wear plate and large inspection covers make mainte ...
Operating pressure: 500 bar, Year of construction 2019 Flow rate: 15 l/min, hot water, Drive: Deutz Diesel 15 kW, Operating hours: approx.: 195 h, Trailer incl. accessories, HD pistol + lance
Key data: 1270 mm, 508 mm, 635 mm
Haas VF-4DHE CNC Vertical Machining Center CNC Control Haas CNC Table size 1,321 x 457 mm Table load 1,588 kg Number of pallets: 1 x X-axis travel 1,270 mm Y-axis travel 508 mm Travel Z-axis 635 mm Spindle holder MAS BT40 Spindle speed 40 - 8,100 1/min Spindle motor 22.4 kW Magazine capacity 24 + 1 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
The machine is in good technical condition, testing is possible by prior arrangement.
Haug AG35 generator charging unit for making products static or antistatic See soecificationa in the pictures
🎯 Perfect Upgrade for Renovators, Formwork Pros & MANTO Fans! Are you already using MANTO Laufkonsolen 90 ? Then this accessory set is the ideal addition for safer and more efficient work on your site.🛠 Why you should get it: Safe working: Guardrail attachment for 900 mm wide platforms Quick to set up: Can be mounted without special tools Perfect fit: Compatible with both vertical and horizontal MANTO panels Buy as a set & save: Ideal for retrofitting and clearance stock 📦 Only while supplies last! Order now and get started immediately.⚡ This accessory package enhances your existing MANTO system and makes every platform safer in no time †thanks to simple attachment with spring pins and additional bolts. All at a top price . 🛒 Don’t wait until your accessories are gone! Reserve your complete set now ...
🏗ï¸ Looking for height, load capacity and speed? This set delivers: 3 complete Hünnebeck ID 15 support towers , approx. 8.50 m high †including all components and H20 brackets for a safe and stable top working platform. 📐 Built for large-scale formwork: Perfect for beam shoring, slab formwork with high spans or temporary support in infrastructure projects. Compact, durable and fully compatible with standard formwork systems. 📦 Fully equipped: You get 3 complete towers †ready to assemble and use on site. Includes working platforms with H20 consoles †no need for extra add-ons. ✅ Modular and expandable: Additional used Hünnebeck ID 15 parts are in stock. Combine towers, add height or scale up as needed. â±ï¸ Limited stock available: High scaffold towers like these are hard to find on the used marke ...
🔧 Stable, ready to use, and exactly what you need on site: 3 used Hünnebeck ID 15 towers , approx. 5.50 m high †including all components and H20 brackets for a safe working platform. 📐 Built for tough jobs: Ideal for beam support, slab formwork or as an add-on system on larger sites. Fits wherever support is needed. 📦 Quick and straightforward: Solid design, easy assembly †no fuss, no extras. just performance where it counts. ✅ Platform included: Equipped with H20 console †you’re safe at the top, no extra parts required. âž• Need more? We’ve got it: Additional used Hünnebeck ID 15 parts are available in stock †perfect for scaling up. â³ Limited availability: These ID 15 tower sets move fast †once theyre gone, theyre gone. 👉 Grab yours now and get the job do ...
💥 You need load capacity, height and safety †right now? This complete set gives you exactly that: 3 full Hünnebeck ID 15 steel frame towers , approx. 5.50 m high, including all components and H20 brackets for a safe top working platform. 🟨 Perfect for your next construction site: Whether youre doing slab formwork, beam support or heavy-duty shoring †these used shoring towers are strong, modular and always expandable. 🟨 Fast setup: Few basic parts, easy handling, no tool chaos. Two workers? Enough. 🟨 Platform included: H20 console included †so youre safe even at the top. No extra parts needed. 🟨 Smart for your stock: Once secured, always flexible. Combine, stack or expand these scaffold towers as needed. 🟨 Need more? Just ask: Larger quantities of used Hünnebeck ID 15 components are availa ...
Used Doka supporting heads H20 DF for securing props to prevent falling down. The heads are serviced and ready to use. The material shows only minor traces of concrete. The price per piece does not include the necessary Doka multi trip transport box 1.20x0.80m. 1 transport box includes 350 supporting heads. Price: from € 5,80 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suitable for standard up to demanding requirements. 5644 x Supporting head H20 DF (Art-No. 586179000), 3 stars, € 5.8 / pc
Used Doka supporting heads H20 DF for securing props to prevent falling down. The heads are serviced and ready to use. The material shows medium signs of use. The price per piece does not include the necessary Doka reusable container 1.20x0.80m. 1 container includes 350 supporting heads. Price: from € 5,80 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medium used formwork & scaffolding with traces of use. Suitable for standard requirements. 1701 x Supporting head H20 DF (Art-No. 586179000), 2 stars, € 5.8 / pc
📏 Compact & clever †the MANTO 1.20 m and 0.60 m! Need formwork for lower wall heights or looking to add flexibility to your setup? Then the Hünnebeck MANTO at 1.20 m and 0.60 m height is just what you need! 🔧 The MANTO 1.20 m and 0.60 m is part of the trusted Hünnebeck wall formwork system †robust, durable, and highly versatile . With hot-dip galvanized steel frames , it’s made to handle tough site conditions and daily use. 💡 💼 Especially practical for details: The 1.20 m and 0.60 m panels are easy to handle , quick to install, and ideal for small surfaces , foundations , or as a smart add-on where flexibility is key. And of course, they can be used horizontally or vertically , and combined as needed. 🔁 And just like always: 📦 Accessories? Absolutely! Our warehous ...
Aircooled chiller/Heat pump CLIMAVENETA I BX N 025T HASNV 24.7 kW/26.1 kW Cooling capacity: 24.7 kW / 7.02 tons (12/7 — 35°C) Heating capacity: 26.1 kW / 7.42 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi ANB52FFTMT (scroll, inverter) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Wilo Yonos PARA HF 25/10 (inverter), expansion vessel. Dimensions: 1.45x0.57x1.7 m. Weight: 265 kg. Working hours: 0 h. Condition: New
Key data: 800 kN
Clamping force: 80 t. Clamping type: Toggle system. Tie-bar spacing: 270 × 310 mm. Platen size: 310 × 310 mm. Mold height: 150–270 mm. Opening stroke (approx.): 310 mm. Ejector stroke: 70 mm. Screw diameter: 26 mm (to be confirmed), Injection volume: 124 cm³. Injection weight (PS): 60–103 g. L/D ratio: 19–22:1. Approx. machine dimensions: 3500 × 1200 × 1600 mm. Weight: 3000–4000 kg. Machine No.: 200000800292.
A Hahndorf keyway slotting and broaching machine is available. Stroke range slotting: 60mm-300mm, max. slot width slotting: 34mm, max. slotting length: 300mm, max. slot width broaching: 14mm, max. broaching tool length: 640mm, max. cutting speed forward/return: 3m/3m/min, weight: approx. 300kg. Documentation available. On-site inspection is possible.
Key data: 1500 kN
Clamping force: 150 t. Clamping type: Toggle system. Tie-bar spacing: 470 × 470 mm. Platen size: 700 × 700 mm. Mold height (min–max, approx.): 180–500 mm. Opening stroke: 420 mm. Ejector stroke: 130 mm. Injection volume: 320 cm³. Screw diameter: 42/45 mm (to be confirmed). Heating zones: 4. Machine dimensions: 5000 × 1400 × 2000 mm. Machine weight: 6000–7000 kg.
Horizontal fully automatic machine for 3-edge and 4-edge sealed pouches for filling and packaging powdery products in double pouch operation (with perforation): Format range double bags (W x H) min. (2x50) x 260 mm, max. (2x80) x 260 mm Output max. 100 double bags/min (depending on bag size) Screw dosing SD 70/2 for double bags Main dosing min. / max. 2.5 - 90 g per bag Micro-dosing min. / max. 0.3 - 5 g Max. Roll diam. 600 mm Core diam. 76 mm Max. Roll width 520 mm Gluing table with splice detection 2 pcs. Thermal transfer printer Allen Coding 5 line cliché, individually switchable Longitudinal and cross seam hot sealing tool, head seam hot sealing tool Sealing stations manually adjustable Print mark control Tear aid with a needle Bag inflator Bag opening control Filling nozzle Trickle protection by sheet shear ...
weight max. in kg: 2000 kg stroke: 3,3 mm fork length: 1200 mm battery: 48V / 575Ah weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1,2 x 3,5 x 2,19 m Electric forklift with charger. Only 2500 operating hours New battery in 2017 3.3-meter duplex mast 2000 kg lifting capacity 2.19-meter clearance height With side shift and fork adjustment Very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
