128,680 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Frech Model: DAK 315S Year of Manufacture: 1996 Type of Machine : Cold Chamber Die Casting Machine Control System: Frech DataControl Shot Count: At least 1,147,108 (indicative, hardware change recorded) Condition: Fully production-ready, currently still connected and operational Included: Striko Westofen W455 holding furnace Technical Specifications - Clamping Force: 3,150 kN - Opening Force: 10,000 daN - Closing Stroke: 500 mm - Adjustable Opening Stroke: Yes - Ejector Force / Retraction Force: 159 / 82 kN - Ejector Stroke: 120 mm - Die Height Min-Max: 300 - 700 mm - Platen Size: 900 x 900 mm - Tie Bar Spacing: 550 x 550 mm - Tie Bar Diameter: 110 mm - Injection Position: 0 / -80 / -160 mm - Maximum Injection Force: 350 kN - Injection Stroke: 430 mm - Shot Sleeve Diameter: 50 / 60 / 70 / 80 mm - Shot Volume: 563 / 811 / 1103 / 1441 cm3 - Specific Injection Pressur ...
sheet width: 3050 mm plate thickness: 6 mm rear stop: 1000 mm cutting angle: 0,5 - 3 ° down holder: 18 Stk no. of strokes: 9-17 Hub/min total power requirement: 7,5 kW dimensions of the machine ca.: 3800 x 2000 x 1600 mm weight: 4500 kg Equipment: - electric backgauge - electric cutting angle adjustment - manual cutting gap adjustment - SP 9 control unit - Safety guard behind the machine incl. light barrier - front finger guard - 1x side stop - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 6 mm rear stop: 1000 mm cutting angle: 1,2 ° down holder: 14 Stk no. of strokes: 18 Hub/min oil volume: 150 l total power requirement: 11 kW dimensions of the machine ca.: 3900 x 1900 x 1600 mm weight: 5500 kg Equipment: - Hydraulic swing cut shears - ELGO control system - Electric backgauge 1000 mm - Manual cutting gap adjustment - Cutting length limitation - Ball rollers in the table - 2x front support arms - 1x front side stop with scale - Front finger guard, hinged - Rear safety device (protective grille + light barrier) - Foot switch - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting width: 250 mm Table dimensions: 500 x 650 mm Saw blade diameter: max. ca. 300 mm Frommia KS 381 table saw for precise longitudinal and cross cuts in solid wood and wood-based materials. The robust construction, angle stop, and swivel table enable reliable work in crafts and workshops. Ideal for carpentry shops and general woodworking and furniture construction. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The Dorst TPA 350 is a robust used powder compaction press, offering a maximum pressing force of 3500 kN. It is designed to handle demanding applications with efficiency, providing a maximum withdrawal force of 2500 kN and supporting force in pressing position up to 2000 kN. The die return force reaches a maximum of 80 kN. It features an upper punch stroke of 220 mm, with an adjusting travel of 200 mm, ensuring precision in operations. This press operates at a rate of 5-18 strokes per minute, catering to various production speeds. It accommodates a maximum filling height of 180 mm and allows a pressing travel and withdrawal travel both up to 90 mm. The top pressing travel is capped at 18 mm, with an upper punch pneumatic preload maximum of 60 mm, demonstrating versatility in its functioning. It operates with a compressed air supply consuming approximately 140 l/min, backed by a total con ...
Bright Beer & Fermentation Tanks Speidel 3 x 625 liters Top condition, vertical stainless-steel bright beer and fermentation tanks, made by Speidel in year 2019. Tank side walls are double jacketed which can be connected to a cold-water source for a product temperature control. Technical characteristics Manufacturer Speidel GmbH, Germany Manufacturing year 2019 Manufacturer’s type BBT FD-082-S Tank volume 625 litres Number of tanks 3 pcs Tank material Stainless steel 1.4301 (AISI 304) Cooling jackets Tank side Tank outside diameters 820 mm Tank height 1660 mm Tank empty weight 80kg
Non-EX version For coating and coating tablets using the film coating process Drum fully perforated with mixing paddles Smooth SU 4.12, hole diam. 3 mm Drum material AISI 316L Drum usable volume 331 litres, drum Ø 1. 450 mm, opening diam. 550 mm Batch size 79-265 kg (filling volume 30-100%, density 0.8 kg/dm3) Spray nozzle Glatt GCSD 3.1 with multi-head peristaltic spray pump with pump trolley Filling chute SmartScoop discharge with discharge hopper Supply air system Glatt M6/F9 with temperature and volume flow measurement Supply air fan Supply air filter 3. H13 measuring device for DEHS filter test Frost protection heating (steam) Dehumidification 32°C/40% rH, independently controlled Humidification with preheater Electric pure steam generator Defensor Mk5 Bypass shut-off damper during sugar coating Exhaust air ...
table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm Special item: The holes in the bottom row of the side panel do not fit or fit only partially. This affects approx. 45 holes. Signs of wear in the plasma nitriding Features: - Holes in the surface in a diagonal pattern - Holes in the side panel in a diagonal pattern - 6 feet – standard configuration 650 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Side panel made of high-quality steel S355J2+N + plasma nitriding - Hole Ø 28 mm - Corners, edges and holes rounded - Side panel height 200 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 330 mm turning diameter over slide rest: 200 mm turning length: 800 mm total power requirement: 3 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: 1,9x0,7x1,2 m turning speed range: 24-2800 U/min Accessories 2 rotary chucks with replacement jaws 5 Multifix holders Set of interchangeable wheels Various tips and accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3060 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3100 mm down holder: 16 Stück no. of strokes: max. 10 - 15 Hub/min oil volume: 160 ltr. cutting angle: 1.6 ° back stop - adjustable: 6.0 - 750 mm Control: ELGO P9521 total power requirement: 18.5 kW weight: 6300 kg range L-W-H: 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s - 1x stable side stop With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with ...
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,660 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Shelving rack stand, used Material colour: sendz. galvanized Finish: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile size: 31 x 60 x 0.88 mm Weight / piece: approx. 8.92 kg Incl. gravel bar and foot plates (Shelf stands are pre-assembled) 2,490 mm high 600 mm deep 06x Shelves, used Material colour: sendz. galvanized f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight | Pcs.: approx. 8.12 kg max. load per shelf 75 kg, with the same load. distributed load. 24x Shelf Racks, used suitable for slotted stands Material colour: sendz. ...
Aufschnittmaschine / Slicer DMS (Dillmann Maschinen Systeme Saarbrücken) Type: DAS 330 T Technical data: 400 Volt / 50 Hz / 0.3 kW Year of Make: 2009 Cutting thickness adjustment: 0.5 to 23.5 mm Knife diameter: 300 mm Stainless steel knife, Teflon-coated Including knife sharpener with normal carriage for sausage or cheese Power current / 16A CEE plug Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.
Aufschnittmaschine / Slicer GRAEF MASTER 3370 Technical data: 230 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife, smooth Power current Machine with CERA 3 coating Weight: 43 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:
Vacuum Filling Machine/Sausage Filling Machine/Vacuum Stuffer Manufacturer: REX DÜKER Type: RVF 327 Fully electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, portioning and twisting of all types of casings. Particularly gentle sausage meat filling with a clear filling pattern. Equipment: 100 litre filling volume Funnel divisible 60/40 L Machine solid stainless steel Speed, speed and break length infinitely selectable Level indicator, piece counter, unit shutdown Portioning range 5 – 10,000 g Portioning speed up to 700 portions/min. Clipper connector on the back Max. filling pressure: 40 bar Three-phase current 400 volts, 50 Hz, 3 phases Program memory for 200 filling programs Unique hygienic design Modern drive concept Minimal energy consumption 12" touch screen control Extremely quiet and qui ...
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,660 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Shelving rack stand, used Material colour: sendz. galvanized Finish: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile size: 31 x 60 x 0.88 mm Weight / piece: approx. 8.92 kg Incl. gravel bar and foot plates (Shelf stands are pre-assembled) 2,490 mm high 600 mm deep 06x Wire mesh shelves, used Material colour: sendzimir galvanised f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 590 mm Total height: approx. 30 mm Frame profile: approx. 25 x 25 mm Mesh size: approx. 68 x 50 mm Weight|pcs.: approx. 6,90 kg Note: Water permeable (up to 70%), suitable for sprinkler ...
From a current recycling we offer you an Iveco Daily 35S18 truck with three-way tipper body from Henschel. Year of manufacture: 2023 Registration date: 24.01.24 Condition: Satisfactory KM.: 106.000 Asking price: 25.000,00 VHB Equipment / accessories / other information: ./. Asset Manager: M. Vorkötter Phone: 0202-25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 64832 Babenhausen The sale is without warranty Subject to prior sale
Baler Paal Konti 325 D/SO, built in 1999 Technical data: Manufacturer: Paal Type Paal Konti 325 D/SO Built in 1999 Hours: 50702 Press force 94 t Drive power: 2 x 45 kW Total connection 104 kW Filling opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight 525 to 800 kg Transport dimensions approx. 12352 x 2340 x 2800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: paper, cardboard, light waste, plastic waste Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex wor ...
Inv. Num. : 9057 Type: CTX 310 Producer: DMG MORI Created: 2004 Parameters: Control system: SINUMERIK 840 D Maximum turning length: 450 mm Max. turning diameter: 200 mm Maximum turning diameter over bed: 330 mm Maximum turning diameter over support: 260 mm Maximum length of travel in the X-axis: 160 mm Maximum feed in the Z-axis: 450 mm Maximum spindle speed: 6000 1/min Weight: 3950 kg
A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect.
Parallel Lathe SCULFORT type MAXICAP 315-3000 R Between points: 3000 mm Maxi Ø on bench: Ø 635 mm Maxi Ø over saddle: Ø 470 mm Maxi diameter in brocken bed: Ø 1000 mm x Width 200 mm Spindle motor: 13 CV Spindle diameter: Ø 71 mm Rotation: from 20 to 1300 RPM Square turret GOODSHAPE 3-jaws chuck Ø 380 mm Threadings: Metric + Whitworth Tailstock: CM5 Feeds: longitudinal + transversal auto advances Equipped with: 1 lubricant pump + 1 face plate Ø 1000 mm Equipped with: 2 fixed steadies: Ø 380 mm + Ø 1000 mm Voltage: 380 V Dimensions (L x W x H): 5200 x 1600 x 1700 mm Weight: approx 5 T
A Raschel warp knitting machine Karl Mayer is available. Working width: 130inch, gauge: E32, yarn feed: EBA-1, guide bar element: C-32-28/P2, guide needle element: Spec-38-45 G105, latch needle element: L-32-93H-0, knock-over comb element: S-32-93H-0, speed: 1800-2000, yarn monitoring: Laser 4080. Including computer. Documentation available. An on-site inspection is possible.
faceplate diameter: 3600 mm swing diameter: 4500 mm turning height: 1850 mm max. workpiece weight: kg vertical adjustment of the crossrail: mm travel -x axis: mm travel -y axis: mm travel -z axis: mm turning speed range: 0,6- 50 U/min power capacity: kW max. torque on the faceplate: weight of the machine ca.: 72 t dimensions: m verticale turning machine double coloumn - digital scale - double coloumn - 2x ram - movable cross slide - extra toolholder (four station) on the side of facing plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...
Technical data: Speed (infinitely variable) 0-3.3300 rpm Basket load (max) 8 kg Equipment/accessories: Parts cleaning Denios washing trough Other accessories for various operating resources
Key data: 230 KW
Bulbous 2G module Agenitor 306. - Engine: MAN E2876LE302 - Generator: Leroy-Somer LSA46.3L11C6S/4 Power 230KW Year of manufacture 2018 Approx. 35,000 Bh Suitable for biogas, natural gas, sewage gas, wood gas, etc. Interim overhaul was carried out at approx. 30,000 Bh. Complete module - Incl. control cabinet - Incl. load cabinet - Incl. power cable - Incl. oil volume expansion - incl. gas section More pictures on request.
Fan / blower CARTER Howden design Gr360° m³/min 250 mm WS 160 Fan wheel ø 550 x140 mm 11 kw V-belt drive, n= 2400 rpm, , From 500 x 440 mm
Nozzle Filter JESNA Matador DFF 48/3000S Filter Area 48 With lock RS 10, 1.1 kw, filter baskets ø 115 mm x 3070 mm long Pictures show the current condition. When purchased, the filter is completely overhauled and painted inside and out
Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price
Welding Machine Urban Plastic Window Welding Machine Type: AKS 3610 Year of manufacture: 2/92 Connected load 2.7 kW Mains voltage 220 V, 50/50 Hz Operating pressure 8 bar Air requirement per weld/stroke 15 l at 6 bar Adjustment range angle 30° - 180° Profile height min. 30 – max. 105 mm Profile width at 90° max. 157 mm Compressed air connection NW 8, 7 bar - Heated blade bead limitation 0.2 mm - Angle welding from 30° - 180° with excellent accuracy. - Above-average welding results of the AKS 3610 for acrylic and foil-coated profiles. - Optimization of the welding result through parallel welding processes. - Individual setting of all welding parameters - Quick change of the outer contour allowances with holding magnets. Machine dimensions: L 770 mm x W 880 mm x H 1500 mm Weight: 320 kg
Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price
VARIAN 380-LC Evaporative Light Scattering Detector Model: 380 LC Evaporative Light Scattering Detector Untested equipment
TECHNICAL DATA: Carpet width: 320 mm Spindle: Ø 70 mm Saw blade: Ø max. 350 mm Processing height: max. 120 mm Electric height adjustment Feed with 2 speeds (0.6 kW) Installed power: 30 kW EQUIPMENT: 1 cabinet with tools
Neerwaartse persbeweging met zijdelingse belasting - maximale openingsafstand: 400 mm - slag: 400 mm - Tafelafmetingen: 3500 x 3000 mm - De bovenste tafel kan verwarmd worden - De onderste tafel is niet verwarmd - 12 zuigers (diameter 90 mm)
THERMO SCIENTIFIC / DIONEX Ultimate 3000 UHPLC HPLC Chromatography System Year of manufacture: 2012 Different modules: THERMO SCIENTIFIC Pump LPG-3400SD (Pump) - RED status light Autosampler WPS-3000TSL ANALYTICAL (Autosampler / Autosampler) - GREEN status light Column compartment TCC-3000SD - GREEN status light RS dioda array detector MWD-3000RS - ORANGE status indicator RS fluorescence detector FLD-3400RS DUAL Pmt (RS Fluorescence Detector) - GREEN status indicator 2 X Solvent Rack Untested equipment A restart by a specialized technician is to be expected, some parts will have to be replaced
THERMO SCIENTIFIC MAXQ 3000 Platform/Orbital Shaker New equipment in its original packaging Model: SHKE3000-1CE MAX Q 3000 Speed: 40 to 400 rpm, ±10 rpm Timer: Continuous or timed from 1 to 60 min With tray / platform included - dimensions 76.2 x 45.7 cm thickness 8 mm Weight: 76 kg Dimensions: 74.7 x 24.6 x 65.5 cm
Buchi K-355 Kjeldahl Distillation Unit Power consumption: 2200 W. Weight: 17 kg Dimensions (D) x (H) x (W): 400 x 360 x 660 mm Display distillation time, steam power Steam power 30 – 100% adjustable NaOH acid resistant pump Measurement range (nitrogen to be analyzed): -0.1 – 200 mg N Equipment tested With accessories and glassware (see photos) Year of manufacture: 2017 In excellent condition
Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 421 kg,
Height=1.86 m, Overall length= 1.9 m, Overall width= 2.3 m, Net weight= 890 kg,
Key data: 2000 mm, 600 mm, 700 mm
5 Axis CNC Machining Center Manufacturer Matec Type 30 HV Year of construction 2013 Control Heidenhain iTNC530 Simultaneous Travel X/Y/Z 2000/600/700mm NC Rotary Table D=950mm Load 1200kg max. speed 18,000 rpm Tool magazine 48-fold IKZ 26bar Automatic tool measurement Tool breakage detection 3D wireless pushbutton m & h Electric Handwheel HR410 Chip conveyor Control at 33344h Program run 11291h The machine is in TOP condition, technically and geometrically very good.
Key data: 900 KW
Make: Caterpillar Model: 3516E Mfg year: 2021 Condition: Unused Serial Number: ND900120 Arrangement Number: 5593393 Power: 900 kW Located in the USA
Key data: 1063 V
EN VENTA o ALQUILER – Jenbacher JGC320 GS-N,L Potencia: 1.063 kW Tipo de combustible: Gas natural, Biogás Velocidad: 1.500 RPM – 50 Hz Sistema de control: DIANE XT3 Year of Manufacture: 2011 Voltaje: 400 V Alternador: STAMFORD Horas de funcionamiento: 62000 Disponible para venta inmediata. Visitas disponibles en el lugar, incluyendo inspección endoscópica. Se pueden proporcionar más fotos e información técnica detallada bajo solicitud. Para más detalles o para concertar una visita, por favor contacte con: Cogeneración Técnica Energética ctenergetica.com +34 674945249
Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available
maximum number of results exceeded
please refine your search
