sw 3 ha used for sale

; Gross weight [kg]: 2100

; Gross weight [kg]: 100; Accessories: SAE4#7, 5

Manufacturer: Homag , Type: KAL 310/8/A20/S2, Year: 2005, Control: PC 22, Work piece width min-max mm: min 55/100, Min.-max. workpiece height in mm: 12 - 60, Min-max feed m/min: 18 - 24, Einlauflineal gesteuert: yes, Premilling: 2 x 3kW, Application of separation agent: yes, Coil magazine: 2, Mitre stations: Fase / Gerade, Pre-milling: 2 x 1,5 kW, Bevel milling: FK 13 - 8Fach, radius milling: 4 kW, Corner tracing type: MN 21, Flat scraper: FA 11, Bonding part EVA: A 20, Top pressure belt/roller: Band, Work piece refeeding: vorinstalliert, FREE TEXT: Frreiplatz, Year :2005

; Gross weight [kg]: 1836

; Gross weight [kg]: 944

Manufacturer: Dete Vorwärmgerät für Lack, Type: 32Ex 1 R, Year: 2000, FREETEXT2: 3,5 Kw, FREETEXT3: Ex geschütz, FREETEXT4: Regelbar Temperatur, Year :2000

Manufacturer: Nestro, Type: N-300-B ex, Year: 1986, Diameter intake mm: 300, Engine power kW: 2,0, Flow rate approx. m3/h: 4300, rotations rpm: 1405, Direkt drive: yes, Ex-protected: yes, Year :1986

Manufacturer: Kaltenbach, Type: TL 350, Control: hand, Saw blade diameter mm: 350, kW output per motor: ca.2, Saw blade tiltable vertikal up to °: 45-90-45, Length control by: no,

; Gross weight [kg]: 1414

Manufacturer: Siemens Elektronikkarte 03410, Type: 3818, Model: 548 229 9001, Serial number: A 8605 590 700,

; Gross weight [kg]: 1500

; Gross weight [kg]: 854

; Gross weight [kg]: 594

; Gross weight [kg]: 560

; Gross weight [kg]: 652

; Gross weight [kg]: 385

; Gross weight [kg]: 344

Manufacturer: Homag, Type: Eingangskarte 32x24V, Model: 2us nach + schaltend PNP, Serial number: 2-083-01-5005, Year: 1995, Nur Abholung : 200, Sale without warranty: yes, Installation height: Preis ist für 1 Stück, Year :1995

Manufacturer: Böllhoff, Type: 30281-Lackheizgerät, Year: 1993, FREITEXT1: Betriebsdruck 280 bar, FREITEXT2: Betriebstemperatur 90, FREITEXT3: Prüfdruck 384, FREITEXT4: Druckraumvolumen 0,92, FREITEXT5: Nennstrom 16 Ampere, FREITEXT6: Nennleistung 3 Kw, Year :1993

; Gross weight [kg]: 152

Manufacturer: Dannfoss, Ersatzteil aus Maschine: Frequenzumrichter, Type: VTL 3006 175H7264, Menge: 3, Kw output: 7,2 / 9,2 kVA, FREITEXT1: 10/13 A,

; Gross weight [kg]: 236

; Gross weight [kg]: 270

; Gross weight [kg]: 100

; Gross weight [kg]: 116

Manufacturer: Dimter , Type: Profipress 3500, Year: 2003, Continuous flow system: yes, Work piece width min-max mm: 300 - 3500, Min.-max. workpiece length in mm: 1300, Min.-max. workpiece height in mm: 11 - 60, Hydraulical/pneumatical: yes, High-frequency: yes, Warm water: yes, Thermoöl: yes, High / low pressure: yes, Cylinder vertical: yes, Cylinder horizontally: yes, Pre-assembling conveyor: yes, Glue application machine: yes, Clamping: yes, Disc saw transverse: yes, FREE TEXT: 2800 Betriebsstunden, Year :2003

; Power [PS]: 61; Gross weight [kg]: 7500; Accessories: Tanker, Battery, Control Panel, Stahldach, Input: AC socket: 3P/5W, 1x375kW - DC socket:2x50kW - AC socket: 3P, 1x60kW, Output: AC socket: 3P/5W, 1x375kW; Water Tank Volume [l]: 650

; Gross weight [kg]: 670; Engine: Battery System: LiFePO4; Accessories: Battery, Control Panel, AC output sockets: 2x 32A (1 for parallel), AC Input sockets: 1x 15kW, DC input: 1x 30kW

Manufacturer: Koch, Type: SBD - 320 , Year: 1994, Control: Programm, Working widht max mm: 1500, Arbeitstiefe max mm: 320, Working thickness max mm: 10 - 32, Saw diameter mm: 350, Work piece transport: Kette, Drilling support horizontal: 2, Drill gearings: 7, Drill gearings: 7, Drill support from top: 5, Drill gearings: 7, Belt conveyor: yes, Gluing: yes, Re-charging: no, Dovel insertion: yes, Raster 32 mm: yes, Horizontal drilling from both sides: yes, Wight approx. kg: 6000, Year :1994

cutting diameter: 305 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Part No.: 950 024 014-02 // Ser. No.: 706DGY00306 Counter: 220,000 sheets Equipment / Additional information: Media format: max. 330 x 788 mm // min. 210 x 210 Media stack height: 500 mm Throughput: A4: 18 000 sheets/hour (100gsm) Grammage: max. 400 gsm / min. 60 gsm Media thickness: up to 600 microns Whether brochures in A4 landscape format, posters, banners or six-page folded leaflets in A4 format, the BDT VX370 feeder ensures the efficient production of numerous printed products. In addition, the feeder can handle a very wide range of media types (60 to 400g/m²) by using the patented, vacuum-free Tornado media handling technology. This unique lifting and transport mechanism ensures reliable handling of paper, cardboard, plastic, foil and other substrates. The storage of repeat jobs is also possible with the BDT VX370 and thus supports productivity and reduces set-up times.  ...

Part No.: 950 024 014-02 // Ser. No.: 706DGY00306 Equipment / Additional information: Media format: max. 330 x 788 mm // min. 210 x 210 Media stack height: 500 mm Throughput: A4: 18 000 sheets/hour (100gsm) Grammage: max. 400 gsm / min. 60 gsm Media thickness: up to 600 microns Whether brochures in A4 landscape format, posters, banners or six-page folded leaflets in A4 format, the BDT VX370 feeder ensures the efficient production of numerous printed products. In addition, the feeder can handle a very wide range of media types (60 to 400g/m²) by using the patented, vacuum-free Tornado media handling technology. This unique lifting and transport mechanism ensures reliable handling of paper, cardboard, plastic, foil and other substrates. The storage of repeat jobs is also possible with the BDT VX370 and thus supports productivity and reduces set-up times. The VX370 feeder supp ...

Manufacturer: Imotech, Type: IMO 324, Year: 1997 ca., Body presses assembly line: yes, Work piece width min-max mm: 650, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 2000, Pre-assembling conveyor: 3 m, Glazing tape: 3 m, Press: IMO 324, FREE TEXT: einschl. Puffer, Querförderer und Rückführung , Year :1997 ca.

Manufacturer: Indramat, Type: Indramat KDW 1.1-100-300-W1, Frequenzumrichter: yes, Motor: MAC 112C-ED-HC, Current (A): 100/100,

Manufacturer: Hackemack Rollengang, Type: 3420, Total metres approx.: 5, Working widht mm: 1400, Total hight mm: 980, Adjustable: yes, Roller pitch mm: 100, roller diameter: 60, Length mm: 5000, Accumulation roller conveyor: Friktionsrollrnbahn, Driven: yes, Working widht mm: 1400, Width total mm: 1600, Conveyor speed m/min: 5-30, Drive power kW: 2 X 3,

Manufacturer: Indramat, Type: MOD 3/1 X 003-334<CRLF>KDS 1.1 100-300-W1/220, Produktionsnummer: 237-787 B 12.065, Frequenzumrichter: yes,

Manufacturer: Indramat, Type: KDS 1.1-100-300-W1, Modell: 3/1x110-006, Seriennummer: 02758, Current (A): 100/25, Operating rpm: 3500/Ma0.025V/8, Gebraucht: yes,

Manufacturer: Indramat Achscontroller, Type: KDV1-3-100/220/300 W1/220, Seriennummer: 758606-060 385 991, Gebraucht: yes,

Manufacturer: Indramat, Type: Indramat KDW 1.1-100-300-W1-220, Seriennummer: Mod 9/11008-140, war verbaut inMaschine: IMA,

Hours in picture Find more here - / Contact us at -

Twelve dosing systems with volumetric progressive cavity pumps ViscoTec (Z and L versions) with collection hopper are available. Dosing volume range: 7.5ml/rev, flow rate range: 75ml/min-937.5ml/min, dosing accuracy: +/-1%, max. speed: 125rpm, max. dosing pressure: 30bar, max. inlet pressure: 10bar. Documentation available. An on-site inspection is possible.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Rippert, Type: N-355 B, Year: 1995, Diameter intake mm: 355, Engine power kW: 3, Flow rate approx. m3/h: 3000-6000, rotations rpm: 1415, Direkt drive: yes, Pressing: 1080, Wight approx. kg: 200, Required space L x W x H mm: 1000 x1000, Year :1995

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Scheer , Type: DB 3000, Control: Fusspedal, Drilling beam swivel-mounted: yes, Number of drill spindles: 4, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 80, Beleimwerkzeuge: no, Dovel insertion: no, Work piece clamping: Pneumatisch, Pneumatic clamping: yes, Work piece support: yes, Work stations: 2, Foot switch: yes, Axis control for: no, Drilling hight: 60, Wight approx. kg: 1000, Abeitsbreite 3000 mm,

saw blade diameter: 370x32x3 mm : 15-150 U/min vice: 190 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180x100 mm : 115 mm : 90 mm : 90x90 mm : 115 mm : 100 mm : 120x100 mm : 115 mm : 100 mm : 120x100 mm total power requirement: 5,5 kW weight: 615 kg Overall size: 1400x1400x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3150 mm plate thickness: 16 mm distance between columns: mm weight of the machine ca.: 16,3 t total power requirement: kW dimensions of the machine ca.: m foot switch motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

REF-0 ULMA SLX-305 L-SEALER WITH TR-100 SHRINK TUNNEL Automatic angular L” sealing machine with shrink tunnel. Manufacturer: ULMA. 1) Sealer model SLX 305: − Year: 2020 − Serial no.: 4515898 − 400 V / 50 Hz / 3.5 A / 3PH − Total power: 2.6 kW − Overall dimensions: 2,400 x 1,500 x 1,720 mm (LxWxH) − Maximum sealing bar dimensions (max. package dimensions): 550 x 550 x 200 mm (LxWxH) − This machine can be used not only for packaging with shrink film (when used together with the shrink tunnel), but also with non-shrink film 2) Shrink tunnel model TR 100: − Year: 2020 − Serial no.: 1511748 − 380 V / 50 Hz / 25 A / 3PH − Total power: 24 kW − Overall dimensions: 2,000 x 1,400 x 1,200 mm (LxWxH) − Chamber length: 1,335 mm − Aperture: 400 x 230 mm (WxH) Overall dimensions of the set: 4,000 x 1,500 x 1,720 mm (LxWxH)

sheet width: 3050 mm plate thickness: 13 mm weight of the machine ca.: 8 t distance between columns: mm total power requirement: kW dimensions of the machine ca.: m motorized limit stop cutting crack adjustment cutting angle adjustment foot switch Technische Daten / technical details: Schnittlänge / max. cutting length 3050 mm Schnittleistung / cutting capacity 13 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 22 kW Gewicht der Maschine ca. / weight 8000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmC-Axis Speed100 rpmMax. torque (40% DC)192 NmTorque of C-Axis (holding torque)168 NmWork spindleSpindle diametre on front bearing120 mmSpindle noseA2-6 Spindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...