sv 500 used for sale

NEW HERBOLD granulator Universal mill – heavy design -Year of construction 1998 - made in stainless steel - from the technical center (machine was used exclusively for experimental/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

sheet width: - plate thickness: - plate length: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 500 mm -Length extended: 935 mm -Width: 13 mm -Height: 27 mm -Price: per pair (left right) -Number: 7x pairs available -Weight: 1.25 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor: not driven -Roll width: 500 mm -Rolls: Ø 50 mm -Roll distance: 135 mm -Transport dimensions: 2055/555/H100 mm -Weight: 36 kg

DIGGING BUCKET 1,500 mm attachment tool, excavator bucket bucket with teeth

Bandwidth.. 1,500 mm Band thickness. 0.7 - 4.0 mm Coil weight... 20 to. Velocity 14 m/min. Working direction right/left

FIS stirred tank 500 liters Manufacturer unknown, boiler is double-walled and can be heated, in a good used and functional condition. The device runs on 400 volts, completely stainless steel, workshop tested, immediately ready for use, Dimensions W/D/H 130/9100170 cm more on request.

SPECIFICATIONS: Length of work table mm: 2700 Width of work table mm: 500

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 500 mm -Fastening type: Thread: M110 x 6 mm -Weight: 72 kg

Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Nominal consumption: 500 W -Drilling/hammer drilling -Speed: 0 - 2200 rpm -Dimensions: 290/80/H200 mm -Weight: 2.2 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Saw blade: Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 7x saw blades available -Price: per piece -Weight: 6,1 kg/piece

Electric cross-cut saw KUSING SPS-500 Cross-cut saw with all-electric control without the use of pneumatic components. Technical parameters: Main motor power: 3kW / 4kW Diameter of the disc: 500mm Maximum cutting height: 160 mm Standard cycle speed: 4 seconds Option: The lifting speed can be infinitely adjusted depending on the load. Since it is possible to change the lifting speed even with a 3 kW motor, you can cut through high materials. Cycle speed: 2 - 6 seconds Ruler length and rails as needed. Price of the ruler: 85 euro/m Price of mechanical stop: 40 Euro / piece

Register punch EUROTRON IND-XR 500, year of construction 2004, serial number S1-2004-1, with adjustable X-axis and Y-axis see result Photo of test, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome, by prior appointment, to visit the machine in our house.

2 fingers parallel external gripper, pneumatic, 52.81.3.500, FLT, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. 2 Finger Parallel External Gripper, pneumatic, 52.81.3.500 Manufacturer FLT (Fibro Läpple Technologie) Clear width closed 98mm Clear width open 122mm Gripper finger length front 60mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put int ...

SUMAB R-500 MAX Fully automatic block line with concrete batching plant. Block line is in stock and ready for delivery! Technical details: • Automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated) • Working pallet dimension: 1400 x 700 mm. • Operation area Max.: 1300 x 650 mm. With the SUMAB R-500 stationary block machine, the following concrete products can be produced in an efficient way: hollow blocks, insulated blocks, paving stones, curb stones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm)

Eillert Salad spinner Model: MSD-500-V Serial: 188 2008, Stainless salad spinner, with three baskets, 1.5Kw, 3Ph

Planer Planer COMEVA MB 500 Working width 510mm 4-knife shaft Traditional knives Worktop length 2630mm Sampler tilted at an angle of 45° Engine power 4kw Uttering combs CE Certificate

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 8x saw blades available -Price: per piece -Weight: 6 kg/piece

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 18 mm -Number of teeth: 120 teeth -Weight: 6 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm - Bolt circle: Ø 100 x 17 mm -Number of teeth: 80 teeth -Number: 4x available -Price per piece -Weight: 5.7kg/pcs

Metal diesel tank - approx. 500 litres capacity - with frame and hand pump - can be driven under by forklift - - - - - Dispatch: - A Germany-wide transport is possible for an extra charge - In order to be able to give an exact freight price please send me a request with your postal code - - - - - Price: - 850,- € + 19 % VAT = 1.011,50 € - An invoice with VAT is issued - Payment: Prepayment - - - - - Other: - Sale of used machinery in actual condition to traders without warranty

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Clamping plate: length 5020 mm -Plate thickness: 37 mm -Dimensions: 5020/500 / H255 mm -Weight: 1550 kg

Table shear cutting knife, replacement knife for table shears, replacement cutting, cutting knife, scissor knife, tape cutting device -Manufacturer: Schleicher, cutting device from conveyor system WV-SYS 160-1050 -Cutting width: max. 900 mm -Dimensions: 1400/165 / H785 mm -Total weight: 300 kg

working length X: 2.500 mm working length Y: 1.300 mm : 4 - 80 mm Number of milling agregates: 2 St. Number of boring motors: 2 St. : 72 : 16 : 4 : 90° schwenkbar : 130 m/min : 80 m/min : 50 m/min : 27 m/min turning speeds: max. 18.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CARRAGARM RACK NEW Data: H : approx. 416 cm D : approx. 137 cm L : approx. 402 cm Cantilever : approx. 120 cm Axial distance : 131 cm NEW GOODS immediately from stock. 500 kg load per arm 2250 kg load per stand Stand in hot-dip galvanized. Cantilever in hot-dip galvanized. Arms are screwed. Arms adjustable in 100 mm grid. Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: 04 x stand, incl. stand approx. 416 cm made of IPE160. 12 x cantilever arms approx. 120 cm made of IPE 80 incl. all necessary fasteners and screws. Why BLT cantilever racks ? Certified German manufacturer DIN EN 1090 - Made in Germany All specified load capacities of the rack stands and cantilever arms are statically verifiable, at 100% load. All racking systems are supplied in hot-dip galvanized design. They can therefore be installed inside and outside and do not rust like pain ...

Manufacturer: Arburg Type: 320 C 500 - 150 Year of production: 2000 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 498 mm x 498 mm Tool height: min 225 mm Opening distance: 350 mm Plate spacing max.: 575 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15 kW Heating: 4,8 kW Dimensions: 3.4 m x 1.4 m x 1.7 m Weight: 2250 kg Screen text: German Additional equipment: Machine with handling Multilift Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor

Travel distances: 500 x 450 x 400 mm [ X x Y x Z ] Number of axles: 5 Rotary swivel table HEM 500 U 3+2 Control: Heidenhain iTNC 530 Spindle holder: ISO 40 / BT 40 Spindle speed: 12000 rpm Tool changer: 30 - fold Drive power : 20 kW Torque : 75 Nm Rapid traverse: 30 m/min Spindle cooling Conveyor Diameter 500 mm IKZ 20 bar ITC 5X Intelligent Thermal Control Oil trap Minimum quantity lubrication Oil mist extraction Blowing air through tool screw Mobile handwheel Glass scales Encoder B-axis Encoder C-axis Tool probing system (TS27R OMP40 Probe

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -Roller conveyor: with hydraulic drive -Roll width: 500 mm -Diameter roller: 50 mm -Center distance: 70 mm -Hydraulic motor: Danfoss type OMM 12.5 -Dimensions: 1200/700 / H180 mm -Weight: 41 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: 500 mm -Taper holder short taper: 6 -Inside diameter: 95 mm -Hole circle: Ø 133 mm -Weight: 82 kg

Area lighting, floodlight, workshop lamp, lamp, hall lamp, hall lighting, pendant lamp, industrial lamp -Power: 500 watts -Number: 6x lights available -Price: per piece -Dimensions: 245/170/ H620 mm -Weight: 4.8 kg/piece

Precision Deburring Faceting Milling Machine / Edge Milling Machine Specifications: Steel – stainless steel – aluminium – plastic – machining Deburring and faceting process is carried out with milling cutter Support angle - facet angle tiltable Facet angle adjustment 15 to 45 ° Facet width infinitely adjustable 0 to 7 mm Length of guide strip 500 mm Speed 2750 rpm Drive 400 V / 0.7 kW Space requirement approx. W 650 x D 600 x H 950 mm Weight approx. 30 kg

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings -Needle bearing: roller bearing -Inside: Ø 500 mm -Outer: Ø 549 mm -Width: 175 mm -Weight: 29 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo type DNU-80-500-PPV-A -Piston diameter: 80 mm -Stroke: 500 mm -Max. Pressure: 12 bar -Pneumatic damping: adjustable on both sides -Dimensions: 730/155/H95 mm -Weight: 6.9 kg

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Control SIEMENS Swing diameter over bed 350 mm Turning diameter 180 mm Distance between centers 500 mm Spindle speed 4000 min-1 Tailstock Multifix Accessories

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 500 mm -Piston rod: Ø 20 mm -Number: 2 pieces available -Price: per piece -Dimensions: 685/65/H65 mm -Weight: 4.2 kg

Emulsion mixer Volume : 500 ltr. Material : areas in contact with the product in stainless steel;

Offer 23035 Technical data approx.: - Pressure capacity 30 t. - max. sheet thickness 10 mm - max. punching diameter 105 mm - Punching performance - e.g. Sheet steel : 105 mm in 1.5 mm ; 45 mm in 5 mm - e.g. VA sheet metal : 90 mm in 1.5 mm ; 45 mm in 4 mm - Stroke 7 - 70 mm - Projection 560 mm - Maximum stroke rate 120 h/min - Single stroke / continuous stroke - Drive 400 V / 4 kW - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - with: - Notice table with stops - Foot switch; - Emergency stop button - Punch quick-change device - various receptacles, punches and matrices

Shuffle-mix 500 mixer / aerator Serial: 500-115 2007, Stainless mixer aerator, 500L, mobile frame, 3Ph

2 Sibre SBH 500/1250/60 Retail sale possible

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Iveco FPT Engine: C87 TE1PV/Stage 3A Engine No.: in production Power: 259 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S 4 L1D D41 Gene. No.: C221374934 Generator power: 310 KVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation IG 500 Switch: Generator switch 4 poles with motor drive Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 450 Dimensions of the power unit: Width approx. mm: 1.400  ...

Key data: 400 , 500 , 400

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC 13 072 A 02 14 ECU Engine No.: in production Power: 440 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 C Gene. No.: in production Generator power: 500 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.600 Height approx. mm:  ...

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 500 mm -Length extended: 980 mm -Width: 22 mm/height: 69 mm -Price: per pair (left right) -Number: 2x pairs available -Weight: 4.45 kg

table diameter: 690 mm table load: 500 / 250 Kg turning speeds: 0,5 - 3,2 U/min Torque: Drehen 1200 Nm spindle bore: 100 mm swivelling range: 0 - 90 Grad tilt adjustment: manually/mechanicall: maschinell : Kippen 1500 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with hollow shaft 500kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Span width: approx. 500 mm -Clamping depth: approx. 200 mm -Dimensions: 650/290/H40 mm -Weight: 5.7 kg

Stainless steel tank, upright with 500 litre volume, operating temperature 20°C, operating pressure 16 bar,

Sumbel Herald 500; good condition; cleaned and tested; Working width 500mm; suitable for hot or cold glue. Sumbel Herald 500; good condition; cleaned and checked; working width 500mm; used for hot or cold glue.