sv 500 used for sale

Technical data: - Year of manufacture 2009 - transport length: 2.500 mm - working width, usable: 1.300 mm - Roller length 1,450 mm - Working height: 900 +-20 mm - Roll diameter: 64 mm - roller pitch: 125 mm - Feed rate adjustable (manual): 3-15 m/min - Installed power: 0,37 KW - Producer Superfici Elmag - Year of construction 2009 - Location, in stock

Technical data: - Year of manufacture 2009 - transport length: 2.500 mm - working width, usable: 1.300 mm - Roller length 1,450 mm - Working height: 900 +-20 mm - Roll diameter: 64 mm - roller pitch: 125 mm - Feed rate adjustable (manual): 3-15 m/min - Installed power: 0,37 KW - Producer Superfici Elmag

Key data: 4200 mm, 1090 , 70

Screw diameter: 70 mm Injection weight in polystyrene: 1090 g Clamping force: 4200 kN Screw diameter: 70 mm Stroke volume: 1212 cm³ Injection weight in polystyrene: 1090 g/hp Injection pressure: 1,877 bar Clamping force: 420 t Lights Tie bar spacing H x V: 810 x 710 mm Tool installation height - min.: 380 mm Opening distance: 710 mm Microprocessor control: NC4 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 45 kW Total connected load: 82.4 kW Total weight: 20,000 kg Total size: 7.9 x 2.3 x 2.5 m Payment terms: 100 % before taking over the machine, net only

Key data: 3500 mm, 810 , 60

Screw diameter: 60 mm Injection weight in polystyrene: 810 g Clamping force: 3500 kN Screw diameter: 60 mm Stroke volume: 891 cm³ Injection weight in polystyrene: 810 g/hp Injection pressure: 2,420 bar Clamping force: 350 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 350 mm Opening distance: 730 mm Microprocessor control: NC5 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 55 kW Total connected load: 78.1 kW Total weight: 17,300 kg Total size: 7.4 x 2.0 x 2.4 m Payment terms: 100 % before taking over the machine, net only

Key data: 2500 mm, 521 , 55

Screw diameter: 55 mm Injection weight in polystyrene: 521 g Clamping force: 2500 kN Screw diameter: 55 mm Stroke volume: 570 cm³ Injection weight in polystyrene: 521 g/hp Injection pressure: 2,470 bar Clamping force: 250 t Lights Tie bar spacing H x V: 630 x 630 mm Tool installation height - min.: 300 mm Opening distance: 550 mm Microprocessor control: Selogica direct Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 1 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.7 x 2.1 x 2.3 m Payment terms: 100 % before taking over the machine, net only

Key data: 3200 mm, 287 , 50

Screw diameter: 50 mm Injection weight in polystyrene: 287 g Clamping force: 3200 kN Screw diameter: 35 or 50 mm Stroke volume: 141 /314 cm³ Injection weight in polystyrene: 154 / 287 g/hp Injection pressure: 2,500/1280 bar Clamping force: 320 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 300 mm Opening distance: 600 mm Microprocessor control: Selogica direct Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.5 x 2.1 x 2.2 m Payment terms: 100 % before taking over the machine, net only

Metal band saw blade, band saw blade, metal saw band -Metal saw band: unused -Dimensions: 5000 x 34 x 1.07 x 2/3 - VPVR -Weight: 1.4 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: 1.5 Nm -Speed: 0-500 rpm -Shaft: Ø 19 x 30 mm -Construction: B5 -Dimensions: 230/230/H200 mm -Weight: 10.5 kg

Lippert roller cam right or left 90°-570-500 IR765 RA1820 Make: Lippert Running direction: 90° right running/ left running Roller width (RB): 500 mm conical, plastic coating Nominal/outer width (NB): 570 mm Inner radius (IR): 765 mm Side guides included on both sides Scope of delivery: without supports (please enquire if required) Optional Features: Running direction: links/ rechts Construction year: 2012 Antrieb: 2 Stück nominal voltage: 24V condition: good (used) Nominal / inner radius in mm: 765 Nominal / outside width in mm: 570 Roll width in mm: 500 angle: 90° Driven: YES Engine type: Trommelmotor KW: - Ampere: - Conveyor speed m / s: regelbar scope of delivery: including side guides without supports For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to  ...

Linear drive, linear gear, screw jack, spindle drive -Manufacturer: ORIGA -Type: P120 SO -Stroke: max. 500 mm -Piston: Ø 40 mm -pneumatically operated -p. Max. Pressure 8 bar -Number: 8x cylinders available -Price: per piece -Dimensions: 800/70/H100 mm -Weight: 5 kg

High Speed Counter 25/500 kHz, PLC control, counter module, counter assembly -Manufacturer: Siemens, Simatic S5 High Speed Counter 25/500 kHz Ovp -Type: 6ES5 385-8MB11 -Number: 3x High Speed Counter available -Price: per package -Dimensions box: 140/110/H60 mm -Weight: 0.3 kg/piece

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: TA 8.5 Nm -Speed: 500 rpm -Shaft: Ø 24 mm -Construction: B3 -Number: 3x available -Price: per piece -Dimensions: 320/235/H185 mm -Weight: 23 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Performance: TA 2.0 Nm -Speed: 500 rpm -Shaft: Ø 24 mm -Construction: B3 -Number: 1x available -Price: per piece -Dimensions: 285/235/H176 mm -Weight: 16.5 kg

Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 500 kg -Lifting speed: m/min -Lifting height: 3.8 m -with: operation -Dimensions: 580/330/H490 mm -Weight: 100 kg

Transformer, converter, inverter, three-phase autotransformer -Input: 220 V -Output: 29.5 V 17 A -Technical data: see photos -Quantity: 2 available -Price: per piece -Dimensions: 140/120/H120 mm -Weight: 12 kg

V23 - used approx. 28.5 m³ / 28,500 ltr stainless steel tank V4A container tank, insulated, heatable and coolable. technical details: capacity: approx. 28.5 m³ / 28,500 litres material: stainless steel V4A dimensions: approx. Ø 2.50 m × L 9.20 m × H 2.60 m without railing Used V4A stainless steel tank, professionally cleaned and in good condition. Horizontal storage tank, container tank, insulated by approx. 20 cm glass wool / rigid foam, heatable or coolable. With foldable railing, 2x lid on top of the roof, several inlets and outlets. The tank is being sold as shown in the pictures. Can be used as storage tank for many different media such as water, liquid feed, whey, potato steam trays, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc. Price upon request. Transport can be arranged at low cost. It is not possible to update al ...

Bending tool, die, upper knife, upper tool -Tool: for press brake, 9 pieces -Dimensions: 95 x 31 mm -Total length: 5005mm -Dimensions: see the drawing in the photos -Lengths: 5 x 835 mm / 1 x 300/260/170/100 mm each -Transport dimension: 835/210/100 mm -Weight: 86 kg

High speed counter 25/500 kHz, PLC control -Manufacturer: Siemens, Simatic S5 Counter -Type: 6ES5 385-8MA11 -Number: 3x module available -Price per piece -Dimension: 100/45/H135 mm -Weight: 0.2 kg/pc.

High Speed Counter 25/500 kHz, PLC control, counter module, counter assembly -Manufacturer: Siemens, Simatic S5 High Speed Counter 25/500 kHz -Type: 6ES5 385-8MB11 -Number: 2x Modul available -Price: per package -Dimensions: 100/45/H135 mm -Weight: 0.2 kg/pc.

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Demag, crane chassis -Beam width: up to 163 mm -Load capacity: 500 kg -Dimensions: see technical drawing in the photos -Dimensions: 250/243/H180 mm -Weight: 15 kg

Straightedge, straightening rail, steel ruler, assembly ruler, assembly straightedge, straightedge -Assembly ruler: made of profile steel -Type: DIN 874 Normal -Dimensions: 503/41/H80 mm -Weight: 9.4 kg

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Winch rope, crane rope, hoist rope, wire rope, stainless steel rope -Stainless steel cable: Crane cable Ø 4 mm type 7x19-4MM -Length: 500 m -Standard: AISI 316 -Price: complete -other crane ropes also available -Transport dimensions: Ø 300 x 270 mm -Weight: 34.4 kg

linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis -Manufacturer: RK Rose Krieger, linear unit -Type: 70230100700 210792 /10 -Travel: 500 mm -Shaft: Ø 8 x 25 mm -Dimensions: Ø 30 x 725 mm -Weight: 1.7 kg

linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis -Manufacturer: RK Rose Krieger, linear unit -Type: 70130100700 210792 /20 -Travel: 500 mm -Shaft: Ø 8 x 25 mm -Dimensions: Ø 30 x 725 mm -Weight: 1.7 kg

• Original (OEM) Kilian die disc/turret with slideways for Kilian Synthesis 500, Generation 1 • Tool type EU-D • Punch diam. 25.4 mm, die diam. 38.1 mm • Keyed upper and lower punches • Transport trolley • Unused, like new

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, spur gear hoist -Manufacturer: Yale, chain hoist , spur gear hoist -Load capacity: 1/2 ton -Chain length: 3.36 m -Quantity: 1 piece -Transport dimensions: 360/165/H250 mm -Weight: 13.1 kg

Height gauge, parallel gauge, height measuring device, height measuring and marking device, height marker -Manufacturer: KS Lenze, height gauge type C500-23 -Max. working height: 520 mm -Number: 2x height gauges available -Price: per piece -Dimensions: 240/175/H575 mm -Weight: 7 kg/pc.

Used rear wall grille for pallet racks - approx. 1,500 x 2,780 x 30 mm Used lattice back panel from a pallet rack in very good condition. With this lattice rear wall, you can secure walkways and driveways behind a pallet rack against falling stored goods. However, they can also be used for other applications, such as safeguarding machines or workplaces. These grids are also often used to demarcate storage areas or picking stations. Properties: - Used back wall grid for pallet racks - For securing running areas - Dimensions: 1,500 x 2,780 x 30 mm - Mesh size: 45 x 45 mm - Frame painted in blue - In very good condition - Available or ready for pick-up by arrangement Properties: Frame color: blue Grid: galvanized Mesh: 45 x 45mm Dimensions: Height: 1,500mm Width: 2.780mm Depth: 30mm