128,750 used machines on RESALE, but how to find them? Machine Search
Spiral bevel gear machine ZFTKK 500/3V. Some of the change gears missing
This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details.
General SKU201T021 MakeUmformtechnik Hausach GmbH Type500 ltr IBC with stirrer LocationBarneveld Pressure Working pressure0.2 Bar Main Features MaterialStainless steel Volume500 Ltr. Pressure0.2 Bar Specified Features - Vertical tank MaterialStainless steel 1.4301 (304) Closed vertical tankcheck Capacity600 ltr (nett 500 ltr) Vessel sizes900x1080 mm With covercheck Conical bottomcheck Manholedia. 40 mm Top connectionsdia. 45 mm (3x) Outletdia. 52 mm With propellor stirrercheck Motor0,55 kW 220/380 Volt Information No.105588 Year of construction1993 Floorspace1,1x0,9 m Total height1,5 m Weight150 kgVertical tanksUmformtechnikTanks > Vertical tanksBrand > Umformtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...
This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details.
General SKUR0379 MakeAlpine Ultraplex LocationBarneveld Type500 UP beater plate Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 380/660 Volt Speed4500 rpm Fine Impact Mills MaterialMild steel Information No.162166 Year of construction1981 Floorspace1,1x0,9 M Total height1,1 M Weight720 KgFine Impact MillsAlpineMills > Fine Impact MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU345S815 MakeR&M Tycon Technoglass Spa No.10887 Year of construction2004 Mounted on legscheck Pressure Working pressure3.5 Bar Vacuum possiblecheck Main Features MaterialGlass Volume576 Ltr. Pressure3.5 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel Notified body(TuV) Capacity500 Ltr (576 Ltr) Vessel sizesdia.1000 x646mm Dished topcheck Dished bottomcheck With covercheck Top connectionsDN100, DN80 OutletDN50 Max. temperature-30/200 degr.C. Information LocationBarneveld Floorspace1,5x1,5 m Total height1,2 M Weight750 KG CEcheckPressure vesselsTycon ItalyTanks > Pressure vesselsBrand > Tycon Italy What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands ...
General SKUR1133 MakePaul Schwingel GmbH (D) LocationBarneveld Type500 ltr Pressure Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume500 Ltr. Motor6.8 KW Specified Features - Stirring vessel MaterialStainless steel 1.4571 (316Ti) Open stirring vesselcheck Capacity550 ltr (nett 500 ltr) Vessel sizesdia. 800x1100mm Dished bottomcheck Flat top sidecheck With cover700x240mm With jacket(150 ltr) Max. temperature200 degr. C With anchor stirrercheck With paddle stirrercheck Motor6,8 kW 220/380 volt (Ex) Speed mixing shaft62 rpm Information No.963340 Year of construction1997 Mounted on legscheck Floorspace1,3x1,2 M Total height3,3 M Weight900 Kg ATEX compatiblecheckStirring vesselsPaul SchwingelStirring vessels > Stirring vesselsBrand > Paul Schwingel What you can expect from Foeth: -- Machine is in working con ...
This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can handle sheet thicknesses up to 6 mm. The machine accommodates workpieces up to 150 kg, with a working range of 2500 mm on the X-axis and 1250 mm on the Y-axis. It requires a 400 V power supply and 6 bar of compressed air. Contact us for more information about this machine.
centre distance: 2.500 mm centre height: 250 mm grinding wheel diameter: 600 mm Total travel of the grinding support: 320 mm spindle speeds: 50 - 450 mm tool adaptor: MK5 tail stock: MK Cylindrical Grinding Machine | NAXOS-UNION - W-500 the cylindrical grinding machine was overhauled in 2017 by KPS-Schleiftechnik (RETROFIT – see order confirmation). The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: W-500-2500 | W500 | W 500 | W 500 2500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine.
Key data: 800 kN
Engel Victory 500/80 Tech / Production line with the Engel Viper 12 robot Year of Make: 2011 Injection unit: Screw diameter: 45 mm Injection weight: approx. 295 g Spray pressure: 1598 bar Dosing volume: 318 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Hydraulic core pull x 3 Hardened injection unit - Bimetal Robot Angel Viper 12 Year of Make: 2014 5-axis robot: 4 axes are driven by servo motors (electric); Axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Purchase of the robot at an additional cost Dimensions: Weight: 5300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pumps/motor: 15 kW All off ...
This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details.
Key data: 1100 kN
Engel Victory 500/110 Tech Ecodrive with the Sepro S5.15 robot / Hybrid machine / Operating hours: approx. in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 40 mm Injection weight: approx. 225 g Spray pressure: 2029 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 110 t Spar spacing: 0x0 mm Size of the clamping plates: 740x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Machine in very good technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 6 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Sepro S5.15 robot Year of Make: 2016 5-axis robot: ...
Allgaier vibrating screen, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 380/400V , Dimensions (mm): 1100x700 H 1150 , Powder outlet height (mm): 695
max. format 51 x 33 cm Year of construction 2012 Stacking delivery Palamides Alpha 500 Double benefit Automatic format recognition Waste Rejection Vibrating device Pressing station Roller table Delivery date: immediately from stock Price on request. Worldwide Delivery & Installation
Allgaier vibrating screen, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 380/400V , Dimensions (mm): 1100x700 H 1100, Powder outlet height (mm): 815
Lead & Pull Spindle Lathe EXCELLO - DLZ 500 SL -Tip height 250mm -Turning diameter over bed 500mm -Turning diameter over support 310mm -Center width 3000mm -Rod passage 65mm -Speeds: 28-1400 rpm -Automatic longitudinal/plane feeds -Three-jaw chuck 250mm -Four-jaw chuck 250mm -Multifix base holder with inserts -Bezel -Tool cabinet -Documentation Dimensions: LxWxH 5.5x1.4x1.6 meters / Weight 3500Kg
Hacksaw RUCOCO RSR 500-4 -Saw diameter 500mm -Stroke rates 34-48-60-85 strokes /min -Mitre cutting device -Replacement saw blade 850x75mm -Machine feet -Roller conveyor Hjbkn Au Ssvc Dnxo Tsl -Coolant device -Documentation Dimensions: LxWxH 2.2x1.1x1.5 meters / Weight 2750Kg
Allgaier vibrating screen, Sieve diameter:: 470 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 230/400 V , Engine: Elektror Motor , Dimensions (mm): 1100x700 H 1200, Powder outlet height (mm): 765
General SKU334N528 LocationBarneveld MakeHenschel TypeHU-500 Main Features MaterialAluminium/Stainless steel Volume500 Ltr. Motor15 KW Specified Features - Universal mixer Universal mixercheck Capacity500 Ltr Vessel sizesdia.900mm x650mm With covermanual operated Pneumatic operated outlet 300x200mm With motor15,0 KW, 380 Volt Rotor speed134 rpm Information Mach.No.821197 Year of construction1976 Mounted on framecheck Floorspace2,4x1,8 M Total height3,0 M Weight1100 KGUniversal mixersHenschelMixers > Universal mixersBrand > Henschel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Arburg 320A 500-170 with the Sprue Picker / Electric Machine Year of Make: 2005 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Hardened injection unit - Bimetal Central lubrication Machine with built-in Arburg conveyor belt and original sorting flap Dimensions: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the sele ...
A CNC 3D coordinate measuring machine Keyence is available. Table diameter: 500mm, measuring diameter: 500mm, measuring height: 200mm, travel X/Y: 280mm, rotation capability: 360°, tilt angle: 45°, max. table load: 50kg, display resolution: 0.1µm, repeatability: 2µm, measuring accuracy: +/-10µm. Machine dimensions X/Y/Z: approx. 720mm/1000mm/860mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible.
Key data: 500 kN
Arburg 320C 500-170 with the Wittmann W811 robot Year of manufacture: 12/2006 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap Robot Wittmann W811 Year of Make: 2010 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot at an additional co ...
Key data: 500 kN
Arburg 320C 500-170 Year of Make: 2011 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Operating hours: approx. 35,000 h in automatic mode Control with air valve Core train control Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2310 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pumps/motor: 11 kW Heating capacity: 9.4 kW Total power: 20.4 kW All offered machines are started by our service technicians before they are sold. It is possible to re ...
Arburg 320C 500-100 / Excellent technical condition Year of manufacture: 10.2004 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Spray pressure: 2000 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: The machine is in excellent technical condition and has been used to test injection molds Operating hours: 25,739 h in automatic mode Total number of operating hours: 30,661 h Hydraulic core pull x 1 Reinforced Injection Units – Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure It is possible to change the screw diameter to smaller or larger: 20 mm or 30 mm Di ...
Arburg 320C 500-250 Year of Make: 2004 Injection unit: Screw diameter: 35 mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Dimensions: Weight: 2330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 500 kN
Arburg 320S 500-60 Year of Make: 2003 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Spray pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Dimensions: Weight: 2350 kg Length/Width/Height: 3.32x1.24x1.81 m Drive: Pumps/motor: 11 kW Heating power: 4 kW Total power: 15 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Arburg 320C 500-170 e² / Hybrid machine Year of Make: 2014 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Operating hours: 48,000 h in automatic mode Air Valve x 2 Core train control Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit – precise injection Dimensions: Weight: 2210 kg Length/Width/Height: 3.41x1.43x1.99 m All offered machines are started by our service technicians before they are sold. It is possible to rec ...
Key data: 500 kN
Arburg 370S 500-70 Year of manufacture: 08.2010 Injection unit: Screw diameter: 25 mm Injection weight: 40 g Spray pressure: 1550 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 8 Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Possibility of adjusting the vertical injection unit with the help of special brackets It is possible to change the screw diameter to 22, 25 or 30 mm Dimensions: Weight: 3170 kg Length/Width/Height: 3.48x1.46x2.03 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machi ...
Used Used labeller P.E. 4.500 bph: Year: 1998 Condition: Good Used labeller P.E | 8T adhesive Year: 1998 Speed: 4.500 bph Direction: Counterclockwise 8 heads Nr.3 adhesive stations Nr. 2 cold glue stations Safety protections Code: EA 448 More details: https://bottlingscout.com
MD-0107 Overhead Cut to Water - Brand: BAUSANO - Model: TDF-500 - Year: 2015 - With 1.5 meter centrifuge - Made of stainless steel - 5.5 hp (4kw) - With water bath and electrical panel
Used Used labeller Newtec 6.500 bph: Year: 2010 Condition: Good EA 636 | LABELLER NEWTEC Year: 2010 Speed: 6.500 Bph Direction: Clockwise Number of heads: 6 Number of stations: 2 Type of application: Front Back Bottle formats: Bordolese from 500g to 1,5Lt Safety protections Code: EA 636 More details: https://bottlingscout.com
Used Used Capper Arol Gemini 2.500 bph: Year: 1984 Condition: Good Used Capper Arol Gemini 2.500 bph: Year: 1984 Speed: 2.500 bph Model: gemini Direction: clockwise Number of heads: 1 Type of cap: natural straight cork Bottle formats: 750 cl e 1.5 lt Safety protections Code: X 407 More details: https://bottlingscout.com
Homogenizing Mixer Manufacturer: Becomix Type RW 500 CD Capacity 500 litres Homogenizing mixer with agitator and wall scraping coolable and heated, pressure- and vacuum-resistant, homogenizer Included: - 500 litre pre-phase tank MV with dissolver agitator - 3 energy and supply frames including vacuum pump - Valve manifold including flow meter - Control cabinet with PLC 7 control (was converted to PLC 7 in 2008) - Control cabinet with FU - 3-part working platform with stairs The process vessel and the pre-phase vessel are placed on weighing cells.
Homogenizing Mixer Manufacturer: Becomix Type RW 500 CD Capacity 500 litres Homogenizing mixer with agitator and wall scraping coolable and heated, pressure- and vacuum-resistant, homogenizer Included: - 500 litre pre-phase tank MV with dissolver agitator - 3 energy and supply frames including vacuum pump - Valve manifold including flow meter - Control cabinet with PLC 7 control (was converted to PLC 7 in 2008) - Control cabinet with FU - 3-part working platform with stairs The process vessel and the pre-phase vessel are placed on weighing cells.
CNC punching machine manufactured in 1995. This TRUMPF TRUMATIC 500 features a maximum punching force of 220 kN and a working area of 2,500 mm. It is multitool capable and comes with 2 tools in a cassette for commissioning. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 500 machine we have for sale. Contact us for further details.
Certus Steam Boiler & Water Tank Type: Junior 500 CVE Manufacture Year: 2012 Please see photos for further specification and information. For more information and more available stock please visit us at - advancedbrewing.co.uk
CNC punching machine manufactured in 1999. This TRUMPF TRUMATIC 500 features a maximum punching force of 220 kN and a working area of 3,000 mm by 1,600 mm. It is equipped with a Bosch control system and is multitool capable. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 500 machine we have for sale. Contact us for further details.
This 3-axis MORI SEIKI SV-500/40 was manufactured in 1998. It features a spindle speed of 10,000 rpm and a tool magazine capacity of 30 tools. The machine has an impressive X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SV-500/40 vertical machining centre we have for sale. Contact us for further details.
: 220 kN sheet thickness - max.: 8 mm travel -x axis: 2500 mm travel -y axis: 1250 mm : 90 m/min : 60 m/min : 108 m/min : 360 °/sec punch diameter: 76,2 mm workpiece weight: 150 kg : 0,01 mm bzw. 0,01° : 15 Stück tool changing time: 1,5 - 6,5 sec weight of the machine ca.: 11.050 kg dimensions: 6400 x 5800 x 2100 mm Working hours: 30.430 h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2500 mm plate length: 1250 mm plate thickness: 8 mm Punching capacity: 220 kN Number of working hours: 51.658 h total power requirement: kW weight of the machine ca.: 11.050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: : : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PLASTIMAC LAB EXTRUDER, for blown film, suitable for testing granulate, 25 mm screw diameter, 70 mm diam. die, 500 mm collection frame, 7,5 Hp drive, complete wuth supporting structure, (corona treatment+small printer can be sold separately if required), installed power - used power in work: about 60-65% : 7,5 Hp, working width: 500 mm, conditions: good
CONTROLS electronic controls OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 200 mm sheet thickness max.: 4.5 mm coil weight max.: 0.5 to DECOILER coil weight max.: 0.5 to mandrel expansion range from: 250 mm mandrel expansion range up to: 550 mm LEVELLER UNIT sheet width max.: 300 mm sheet width (min): 20 mm sheet thickness max.: 4 mm sheet thickness min.: 0.5 mm material cross section max. (450 N/mm2): 800 mm² number of leveller rolls: 7 diameter of leveller rolls: 65 mm number of infeed-/outfeed rolls: 4 diameter of feed rolls: 65 mm drive power: 1.5 kW loop controls: yes ELECTRICAL SPECIFICATIONS mains voltage: 380 V mains frequency: ...
Transnorm leading feed belt conveyor with overdrive GF 1720/1700/1650/1200/1000-700/600-600/500 RA2468 (NL-NB-GuB) Technical data: Conveyor length (NL): 1720, 1700, 1650, 1200, 1000 mm frame width (NB): 700 or 600 mm belt width (GuB): 600 or 500 mm Overall height (BH): 80 mm Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Drive: overdrive Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: Übertrieb scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-m ...
A vibratory finishing trough Trowal for the aging of parquet strips is available. Maximum product length: 2400mm. An on-site inspection is possible.
Vertical BAZ MIKRON VC 500 with internal cooling 10 bar Year: 2001 Control: Heidenhain 430 TNC Operating hours: 3,300h Technical data: Spindle speed: 10,000 1/min Drive power: 13 KW Tool holder: SK 40 Number of magazine slots: 21 pcs. Travels: X-axis: 510mm Y-axis: 510mm Z-axis: 560mm Table size: 650x600mm Accessories: - IKZ with 10bar - Späneförderer - Electronic handwheel - Renishaw 3D button - Oil mist extraction - Rotoclear Machine was in a training company
A fully functional sandblasting system is being sold. Dimensions of working chamber approx. H180 W 150 D160 cm Dimensions approx. H400 W210 L210cm There are 2 lifts available Price per piece 8000 Euro net plus VAT Available from June 2026 If you buy both machines, you will get a basement extraction system with water separator free of charge. See other ads. The plant must be dismantled and transported away by the plant itself. There is only a 2t forklift on site The system is handed over by us without electricity. Article location Nuremberg All information without guarantee
maximum number of results exceeded
please refine your search
